• Knowledge Base Search Results: 149
  • Forum Messages Search Results: 107
  • Shop Built Equipment Gallery Search Results: 1
  • Sawmill Gallery Search Results: 3
    • Your search for dehumidifier found 260 documents (of 102695 searched).
    1-260 of the 260 results are displayed below.
      


    Knowledge Base Results:

    Drying wood in a tent
    Recommendations on how to use the sun's rays and a plastic tent to dry lumber. November 7, 2001

    Dehumidifiers and Lumber Storage
    A dehumidifier in the storage room will keep lumber at the proper moisture content, and will do no harm. December 6, 2012

    Don't send a home dehumidifier -- to do a commercial kiln's work
    Are domestic dehumidifiers adaptable for use in drying small quantities of lumber? March 12, 2000

    Home dehumidifier for drying lumber
    Can a home dehumidifier be used to kiln dry lumber? January 31, 2001

    Residential Dehumidifiers for Kiln Drying
    You need an industrial model to dry wood — the homeowner version is not built for it. November 8, 2007

    Kiln Drying with a Household Dehumidifier
    Rigging up a homeowner-type dehumidifier to dry small amounts of wood may be cheaper to begin with, but has practical limitations. April 11, 2008

    Why Insulate a Solar Kiln?
    A long discussion delving into the mechanics of how a solar kiln creates proper conditions for drying wood. January 28, 2014

    Troubleshooting a Dehumidifier Kiln
    A newly acquired (but secondhand) dehumidifier kiln has some performance issues, and the Sawing and Drying forum offers advice. March 26, 2013

    Home-Built Dehumidification Kilns
    Here's a long discussion of small, inexpensive dehumidifier kiln design, including a consideration of the fire risks involved. September 17, 2012

    Whether to Run a Dehumidifier in a Solar Kiln
    Solar kilns usually run too hot to be suitable for a dehumidification approach. Correct venting is the key. January 17, 2011

    Micro-Scale De-Humidifier Wood Drying
    How to cobble together a miniature dehumidifier wood-drying kiln. September 17, 2008

    Solar and Dehumidifier Kiln in Winter
    Thoughts on how to improve the poor performance of a solar drying kiln during winter. December 31, 2012

    Kiln Operation - The Wood Doctor Collection of Articles at WOODWEB
    Kiln Operation - The Wood Doctor Collection of Articles at WOODWEB

    Kiln Construction - The Wood Doctor Collection of Articles at WOODWEB
    Kiln Construction - The Wood Doctor Collection of Articles at WOODWEB

    Dehumidifier Kiln Advice
    Detailed conversation about building, equipping, and operating a dehumidifier kiln to dry lumber. September 10, 2007

    Fan Motor Switch Tripping Problem in a Dehumidifier Kiln
    Troubleshooting a fan performance issue in a dehumidifier kiln. October 15, 2010

    Dehumidifier Kiln Chamber Size
    A discussion of constructing the drying box to fit the dehumidifier capacity and the intended lumber dimensions and quantity to be dried. October 26, 2011

    Making a Drying Kiln from an Insulated Truck Body
    This conversation touches on the quantity of heat needed to dry a load of wood, the advantage of using a dehumidifier, and the possible issues with corrosion. April 18, 2015

    Sizing Up Dehumidifier Kilns
    Thoughts on the objective characteristics to consider when evaluating which dehumidifier kiln is right for you. April 11, 2008

    Adding Fans to a Dehumidifier Kiln
    Is it worth it to exceed the design air circulation in a dehumidifier kiln? By the numbers, probably not. May 15, 2012

    Controls and Venting for a Dehumidifier Kiln
    Advice on controlling the conditions in a dehumidifier kiln. August 1, 2011

    Cargo Container Dehumidifier Kiln
    Where to put the dehumidifier in a cargo-container drying kiln? January 29, 2009

    Drying Rates and Settings in a Dehumidifier Kiln
    How to understand your dehumidifier kiln's capacity and drying rate. December 6, 2012

    Dehumidification Versus Cooling for a Wood Shop
    An undersized air conditioner will dehumidify effectively as it cools the shop. August 24, 2008

    Home DH for drying lumber
    Home dehumidifiers versus bought kilns for drying wood. September 2, 2002

    Heat Control in a Dehumidifier Kiln
    Understanding how supplemental heating and the compressor's heating effect interact in a dehumidifier kiln. February 15, 2009

    Power Vent Systems on a Dehumidifier Kiln
    Comments on the practicality of automatic powered vent louvers on a dehumidifier kiln. March 31, 2008

    Furniture Shipping and Tropical Moisture Issues
    Shipping from the tropics to the temperate zone, how do people deal with humidity changes? Here are some thoughts and possible solutions. November 8, 2007

    Dehumidifier Kiln "Hanging Up"
    Dehumidifier kilns sometimes stall as moisture content readings get closer to the target. An extra shot of heat can help a lot. July 3, 2008

    Home-Built Dehumidifying Kilns
    Practical issues and concerns with building a drying kiln that uses an off-the-shelf dehumidifier or a salvaged commercial air conditioner instead of air venting. July 13, 2006

    Humidity, Temperature, Wood Moisture Content, and Wood Movement
    Basic technical information and an extended discussion of the way wood expands and contracts in response to changes in temperature and humidity. November 13, 2009

    Wood Drying Conditions and Musical Instrument Sound Quality
    Instrument makers, musicians, and sawing and drying pros discuss whether kiln-dried or air-dried wood affect the way a musical instrument sounds. February 14, 2010

    Air-Dried Oak for Furniture
    In theory, kiln-drying is better; but people have successfully made furniture from air-dried hardwood. April 20, 2011

    Troubleshooting Drying Stress
    Some general instruction about the causes of drying stress for the owner of a dehumidifier kiln. April 2, 2013

    Converting A Shipping Container to a Drying Kiln
    Design, construction, and operation info from folks who've done it. February 26, 2005

    Using Outdoor Cold for Drying Dehumidification
    Unlike a powered dehumidifier, a cold kiln wall dumps heat to the outdoors, and so expends energy just as venting does. Here's a long discussion of alternatives to heat for kiln drying, and why they're mostly not practical. April 10, 2007

    "Safe Drying Rate" and a Dehumidifier Kiln
    A discussion of how to apply "safe drying rate" calibrations with a home-built dehumidifying kiln. January 27, 2007

    Ideal Humidity in a Wood Shop
    Indoor humidity levels correspond with wood moisture content. Here's advice on humidity control. October 26, 2012

    Cabinet Warranty In Unfinished Buildings
    Covering yourself against damage caused by humidity and temperature. April 10, 2005

    Monitoring Progress in a Dehumidifier Kiln
    Collecting and measuring the removed water is not a reliable way to gauge drying progress, especially when drying mixed thicknesses of wood. June 4, 2012

    Drying Wood in a Shipping-Container Kiln
    Insights on using a dehumidifier kiln built from a shipping container. December 11, 2007

    Is Dehumidifier Kiln Wastewater Safe?
    Don't assume that it's safe to dump kiln water to the environment. There could be some contamination. March 10, 2008

    A Detached Solar Collector for a Lumber Drying Kiln
    A discussion of whether to add a detached solar collector to an insulated drying shed, or to use a dehumidifier instead. January 28, 2014

    Controlling Overheating in a Dehumidifying Kiln
    How to cool off a dehumidifier kiln that is overheating just from the compressor heat. March 4, 2009

    Drying Schedule for Red Oak
    Advice for a kiln operator on drying rates and humidity and heat settings for drying Red Oak in a dehumidifier kiln. October 3, 2009

    Setting Pitch in a Dehumidifier Kiln
    DH kilns may not reach the temperatures required to set pitch in wood. Be careful of CO poisoning when supplying supplemental heat. December 11, 2007

    Sycamore Drying Schedule
    Advice on a drying schedule for Sycamore in a dehumidifier kiln. August 8, 2008

    Building Your Own Spray Room -- On a Budget
    Technical advice and alternatives for a small operator building a new shop. February 25, 2005

    Pricing for Kiln Drying Lumber
    Here are pictures of a drying kiln building under construction, with commentary on how to charge for drying wood with a dehumidifier kiln. December 8, 2012

    Dehumidifiers For Kilns
    12/08/2015

    Wood Properties - The Wood Doctor Collection of Articles at WOODWEB
    Wood Properties - The Wood Doctor Collection of Articles at WOODWEB

    Wood Engineering - The Wood Doctor Collection of Articles at WOODWEB
    Wood Engineering - The Wood Doctor Collection of Articles at WOODWEB

    Solar Kiln Designs 2 -- Solar Heated, Lumber Dry Kiln Designs - Part 2
    An in depth article by Gene Wengert and Luiz Carlos Oliveira

    Indoor Humidity and Wood Moisture Content
    A discussion with data, about typical indoor humidity levels and the corresponding effect on wood moisture content. October 13, 2010

    From Log to Furniture
    A newcomer has logs and wants to make some furniture. The sawmill forum has advice for him. January 14, 2013

    Making Furniture from Air-Dried Oak?
    A beginner asks about drying wood for use in rustic furniture. April 20, 2011

    Wood Panel Shrinkage and Bare-Wood Witness Lines
    A discussion of how to prevent or repair the tell-tale bare wood lines that may appear on the edge of stained door panels in dry winter conditions. April 29, 2011

    Drying with Moderate Heat
    Here's info on how various types of wood will respond to conditions in a home-built drying room that doesn't get much warmer than 120°F. There's a useful lecture here on how case-hardening occurs. May 16, 2008

    Mobile Wood-Burning Kiln
    Is a wood-fired, movable lumber drying kiln feasible? Here are some ideas. July 13, 2006

    Marketing Spalted Pecan
    Beautifully figured spalted Pecan wood is a valuable material, but the niche market is a little tricky to sell in. May 9, 2007

    Finish Turns White When Applied
    A clock-maker learns to fight the milky-white blush that comes from finishing in cool, humid conditions. December 6, 2011

    Controlling Mildew in Air-Drying Lumber
    Surface mildew in a stack of boards being air-dried should respond to some dehumidification in the space. April 15, 2012

    Firewood kiln
    Methods and facilities used to dry firewood. November 26, 2001

    Checking Moisture and Achieving MC Targets
    Higher moisture near the core has a lumber dryer doubting his moisture meter, but drying conditions are the more likely concern. September 6, 2010

    Dehumidifier Kiln Drying and Insects
    Cooler temperatures in a DH kiln aren't a reliable way to kill all insects, but the dryness will get some of them. May 18, 2010

    Drying Beech in a Dehumidifier Kiln
    Beech needs an aggressive drying schedule, similar to Oak or hard Maple. January 25, 2013

    Shipping Container for Dehumidifier Kiln: Big Enough?
    Thoughts on converting a shipping container to a kiln. December 8, 2012

    Control Issues in a Dehumidifier Kiln
    If you run the kiln too hot, a safety cutoff may shut down your compressor, interfering with the drying process. April 27, 2007

    Humidity and Conversion Varnish Cure Time
    Dehumidifying, air-conditioning, or heat drying can speed CV cure times during muggy weather. October 26, 2005

    Keeping Wood Dry in Storage
    How much heat is needed to keep stored lumber dry indoors? December 6, 2011

    Stickering Wood in the Basement
    Getting wood to dry in a cellar is problematic. July 18, 2008

    Air Drying Lumber - The Wood Doctor Collection of Articles at WOODWEB
    Air Drying Lumber - The Wood Doctor Collection of Articles at WOODWEB

    Lumber Storage - The Wood Doctor Collection of Articles at WOODWEB
    Lumber Storage - The Wood Doctor Collection of Articles at WOODWEB

    Spraying in Humid Conditions
    Finishers discuss ways to adapt to hot, humid weather. October 18, 2005

    Setting Shop Temperature
    A long discussion about how warm (or cool) to keep a shop, whether to turn the heat down at night and over the weekend, and the effect on costs, productivity, and quality of different practices. December 24, 2012

    Start-Up Manufacturing Millwork
    It's harder than a beginner might think to make money producing mouldings on a shoestring. Old hands discuss the hard truths in this thread. April 4, 2011

    Solar Kiln Designs 1 -- Solar Heated, Lumber Dry Kiln Designs - Part 1
    An in depth article by Gene Wengert and Luiz Carlos Oliveira

    Troubleshooting Cupped Flooring over a Heated Slab
    Here's a long discussion about cupped wood flooring over a slab. aJune 12, 2014

    Outdoor wood furnaces
    Experiences with outdoor "water stove" heating systems. March 20, 2001

    Dealing with Bowed or Warped Plywood
    Warped, bowed, cupped, twisted — these days, plywood seem to lie every which way but flat. Here's a long and somewhat technical discussion of what makes plywood deform, and what can be done about it. December 28, 2005

    Crack Prevention and Repair for a Large Wood Turning
    Here's a long, thoughtful technical discussion of humidity conditions, wood cracking, prevention, and fixes, focused around the case of a very large wood turning that has developed hairline cracks. January 20, 2011

    Troubleshooting Shrinkage Cracks in a Veneer Tabletop
    Water-based glue may have caused expansion, then shrinkage, leading to gaps between the veneer pieces. June 10, 2006

    Dry lumber kiln -- buying your first
    Business and technical considerations when getting started in kiln drying. March 19, 2001

    Drying Ash Flooring
    Kiln-drying is essential to kill bugs and achieve the proper low moisture content for stability in service. May 11, 2005

    Troubleshooting Veneer Shrinkage
    A waterbased adhesive may be causing freshly applied veneer to swell on application, then shrink within a few days. July 24, 2006

    Contaminants in High-Gloss Finish
    Is dust causing the flaws in this otherwise mirror-shine finish? August 26, 2004

    Forced-Air Shop Heat Versus Radiant Heating
    A few thoughts on the effect different heating system types have on comfort for people, and conditions for wood or machinery. April 10, 2008

    Fan Speed for Solar Kilns
    Advice on maintaining appropriate air flow over the stack in a solar drying kiln. March 26, 2013

    Conversion Varnish Wrinkling Problem
    Wrinkles that appear after applying a second coat of CV could be caused by a variety of mis-steps, some related to the "recoat window." October 1, 2010

    Air-Drying Versus Kiln-Drying for High-Value Wood
    Done right, kiln-drying gives you better control over quality. June 9, 2007

    Milling for shares
    Sawyers discuss the practicality and profitability of share-cutting. March 4, 2002

    Indoor Wood Shrinkage and Expansion
    A learned discussion of the way building interior humidity causes dimensional change in wood. December 1, 2005

    Spray Room Cleaning and Hygeine
    For a quality finish you need a clean shop and spray room. Here's advice on getting there. January 2, 2012

    Air-drying oak
    Can a suitable MC for cabinet construction be reached? February 6, 2002

    Dehumidification Kiln Conditioning Without Steam
    Techniques and equipment for producing a balanced environment inside your kiln. May 11, 2005

    Mixed-Species Loads and Moisture Equalization
    Kiln-drying Spruce and Fir together creates difficulty, because they dry at radically different rates and because there is moisture transfer between boards. June 13, 2014

    Drying Oak Lumber: Step 7, Storage
    The Wood Doctor discusses how to protect dried lumber from damage during storage. August 27, 2012

    Is Vacuum Dried Wood Stronger?
    With so many variables to control, it's hard to be sure whether any particular drying system gives better results in terms of wood properties. October 29, 2012

    Wood Floor Over Concrete Cupping Problem
    Wood floors over concrete can be prone to problems. Here's an example. April 4, 2011

    Quality Control for Picture Frames
    The fine art of woodworking: a discussion of wood choices, moisture control, and other key issues involved in creating picture frames that will be stable in service.June 12, 2014

    Indoor Conditions for Museums with Wood Furniture
    Maintaining constant, correct humidity is the paramount concern. February 15, 2009

    Kiln insulation
    A discussion of good insulations types for kilns and information on R values. February 7, 2001

    Dehumidification drying of thin stock
    Simple drying methods for small, thin stock. (Sawing and Drying Forum) March 23, 2003

    Furniture from Air-Dried Red Oak
    If "air drying" is understood to include drying to equilibrium in a conditioned indoor space, then the result can be useable wood. May 27, 2008

    Shop Temperature and Wood Machining
    Is it okay not to heat the wood shop at night? Could be, but humidity changes are a potential problem. August 26, 2008

    Film on finish
    Remedying a blush on finish which can be wiped off but reappears. September 25, 2002

    Lowering Wood Moisture Content
    A woodworker has some lumber at 12% moisture content that he wants to dry down to 9%. Here are some quick and cheap ways to accomplish that. October 19, 2013

    Using Beech to Build Cabinets
    It's a beautiful wood, but is American Beech too unstable for cabinets? Not necessarily, say those who've tried it. August 21, 2006

    DH Kiln Drying
    References for DH kiln drying instruction

    Design Question: Stove Adjacent to Refrigerator
    Is it okay to have the stove right next to the refrigerator, when a small kitchen space is a challenge? February 19, 2008

    Shop-Drying Eucalyptus
    Thoughts on how to dry and condition Eucalyptus for use in a table top. December 31, 2012

    Whether to Locate Furniture Shop in the Basement
    Cheap heat and convenience are up sides, but insurance could be a worry. April 20, 2011

    Cupping in Wide Boards from Drying
    A discussion of the processes that make boards cup during kiln-drying. February 27, 2013

    Dry Kiln Information Resources
    A list of clubs, organizations, books and publications providing information about drying lumber for use in woodworking. 1998.

    Drying Bowl and Platter Blanks
    Rough-turn the pieces before drying for better results. August 30, 2005

    Storing Maple in Partially Dried Condition
    A woodworker gets advice on the feasibility of maintaining wood at 25% moisture content for use in drying operations. January 8, 2010

    Lumber Storage After Kiln Drying
    Advice on storing kiln-dried wood in the proper humidity conditions. November 14, 2009

    Adding Heat to a Solar Kiln in Winter
    Supplemental heat is tricky, because there's a risk of over-drying and casehardening. May 13, 2009

    Lumber weight as a drying signpost
    Calculating weight and moisture loss in a dehumidifcation kiln. July 24, 2001

    Glazing for a Solar Kiln
    Clear glazing works much better than translucent white, a solar kiln owner discovers. December 15, 2005

    Sawing wood for house-framing
    The basics of sawing and drying lumber to by used in constructing a house. January 3, 2001

    Adapting a Greenhouse for a Solar Kiln
    Thoughts on converting a polycarbonate-glazed greenhouse to use it as a wood drying kiln. April 18, 2009

    Split Log Fireplace Mantels
    Tips and techniques for log peeling, seasoning, and installing for a split-log mantelpiece. February 17, 2006

    Air-Drying Cuban Mahogany
    This stable wood may dry fast indoors, but kiln-drying would also eliminate pests. September 14, 2006

    Drying Walnut and Cherry in the Garage
    A garage or attic is an okay place to air-dry small quantities of hardwood. January 2, 2012

    Dry-Bulb and Wet-Bulb Settings and Kiln Control
    Tips on temperature and humidity control in kiln-drying operations. March 26, 2007

    Relative Humidity in the Wood Storage Area
    Advice on what humidity level to maintain where rough lumber is stored, and how to accomplish that. September 23, 2008

    Stored Lumber, Ambient Moisture, and Lumber Moisture Content Changes
    Kiln-dried lumber stored in a non-conditioned space will equilibrate with the natural relative humidity conditions of the ambient air. April 21, 2011

    Dessicant Driven Dehumidifying Kiln?
    12/14/2013

    Nyle L150 dehumidification system
    A discussion about whether a Nyle L150 dehumidification system is salvagable. March 6, 2000

    Conditioning lumber -- The final step in drying
    Why conditioning is the last but crucial step in the drying process. December 12, 2000

    Operating Solar Kilns on a Rainy Day
    On rainy days, close the vents and switch off the fans. March 16, 2015

    Drying green tongue-and-groove pine
    Success in drying green, already-machined lumber has much to do with the species. 1998.

    Lumber drying options and efficiencies
    The Wood Doctor's favorite references for making decisions among lumber-drying options. 1998.

    Solar or dehumidification kiln?
    A discussion of the merits of two types of kilns for lumber processing. March 12, 2000

    Drying 6" X 8" Pine Beams
    Estimates of the required drying time for large pine timbers. May 27, 2014

    Pros and Cons of a Basement Workshop
    Woodworkers share experiences with home-based woodshops. March 12, 2006

    Hawaii Solar Kiln Show and Tell
    A forum member from Hawaii shows his backyard solar drying kiln and gets some advice on improving it. May 27, 2014

    How did our forebears dry lumber?
    How lumber was dried for furniture construction prior to the introduction of kiln drying. November 21, 2000

    Heat, Air Movement, and Drying Time
    Finishers discuss the use of heaters and fans to reduce re-coat wait times. February 21, 2011

    Preventing Drying Damage to Oak
    Advice on controlling the drying conditions for Oak. December 6, 2009

    Borate-Treating Freshly Sawn Wood
    Ideas, thoughts, and tips for using borax and borate solutions to make green lumber bug-resistant. June 12, 2006

    Humidity Control in a Kiln
    A kiln operator gets advice on airflow and humidity settings. April 27, 2007

    Peel and Stick Edgebanding
    Occasional users discuss the pros and cons of peel-and-stick edgebanding. June 23, 2014

    Equipment needed for one-man startup
    Advice on budgeting and buying machinery for a new custom cabinet shop. December 12, 2000

    A Cautionary Tale: Shop Fire Destroys Building and Burns Owner
    This thread will teach you the hard lessons learned by a shop owner whose buildings caught fire — without having to go through it yourself. October 4, 2011

    Roughness and Final Sanding with Waterbased Topcoats
    Roughness on horizontal surfaces could be overspray, but it could also relate to grain raise and sanding methods. May 13, 2013

    Painting Over Cracking Conversion Varnish
    Finishers discuss why a kitchen CV finish would have cracked, and how to paint over it. December 10, 2007

    New Church Altar Implodes In Dry Conditions
    02/24/2014

      ---   Return to Top   ---     


    Forum Results:

    Re: Dehumidification H20 output monitoring
    A message posted at WOODWEB's Sawing and Drying Forum (2/21/22) -- Answer to question about my dehumidifier and comments re: same. I was fortunate to ...

    Re: wood shrinkage question
    A message posted at WOODWEB's Cabinetmaking Forum (12/20) -- This is an easy question to answer. 1) If the house has no trouble at all staying below ...

    Re: Is there a practical limit to how small a kiln can be?
    A message posted at WOODWEB's Sawing and Drying Forum (7/23) -- Mark, I have a wood shop but no sawmill yet. My question is similar to yours as I get ...

    Re: Drying Wet Plywood in a Boat
    A message posted at WOODWEB's Sawing and Drying Forum (12/13) -- Gene thank you for your message. If there is a more appropriate place for this post, ...

    ceiling boards swelling before timber frame is dried in
    A message posted at WOODWEB's Sawing and Drying Forum (5/30) -- I have 2x10 ceiling boards over purlins spaced about 3 feet apart. I was a little wor ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Definitely a dehumidifier, like John said, it adds heat, and an AC doesn't have a pur ...

    storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (4/19) -- my initial thought is this is a terrible idea but having had a conversation w ...

    Equipment selection on dry kiln for wood
    A message posted at WOODWEB's Sawing and Drying Forum (5/17/22) -- This question is for either Professor Wengardt or others that have expert advice r ...

    Re: Solar kilns and cold cloudy days
    A message posted at WOODWEB's Sawing and Drying Forum (12/15) -- As a rule of thumb, 50 F or warmer dries wood at a somewhat reasonable rate, if ther ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/15) -- Hey Bill that looks awesome! Where does the dehumidifier unit go? Also are those fans ...

    Re: huge mistake with heavy bar over floating floor.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/15) -- I had this same thing happen to me a few years back. I brought my deh ...

    Re: supplemental heat for solar kiln to kill bugs
    A message posted at WOODWEB's Sawing and Drying Forum (1/14/22) -- I built an electric kiln in my wood storage shed. I use it to KD wood that I first ...

    new dry kiln on the cheap
    A message posted at WOODWEB's Sawing and Drying Forum (12/11) -- Howdy all, i will see if i can get some photos off my phone onto here so you can all ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (5/10) -- If this is a residential dehumidifier, it probably will not be able to run much above ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/9) -- I already have a heat source in the kiln, the airconditioner gives out more heat than ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/8) -- If this is a residential dehumidifier, it probably will not be able to run much above ...

    Re: drying to single digits p2
    A message posted at WOODWEB's Sawing and Drying Forum (1/8) -- It's impossible to say how long it will take to dry from one MC to another. It depends ...

    Re: Old growth Cherry, possible value?
    A message posted at WOODWEB's Sawing and Drying Forum (9/7) -- I live in the Rochester NY area. And the above mentioned prices are correct for air dr ...

    Re: drying to single digits
    A message posted at WOODWEB's Sawing and Drying Forum (12/3) -- The dehumidifier doesn't have to sit on the floor. Put it high enough so the water wi ...

    green house as kiln or just to sterilize lumber of boring pests
    A message posted at WOODWEB's Sawing and Drying Forum (7/1) -- I have a trailer load of lumber with 1 inch spacers (1 inch pine boards)that I am plan ...

    Re: FPL-118 and Nyle Schedules - For 8/4 and 12/4 White Oak
    A message posted at WOODWEB's Sawing and Drying Forum (6/1/23) -- Jim, Thanks for the response. Was wondering if anyone would respond. If that is wha ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Never heard of using an AC. Would you blow the cold air outside? Definitely use a deh ...

    Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- For a relatively small-size kiln, what do you think is better, a dehumidifier, or an ...

    Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (4/7/22) -- Hi, I've decided to make the plunge to drying my own lumber. I plan to build my own ...

    Re: drying to single digits
    A message posted at WOODWEB's Sawing and Drying Forum (12/3) -- I have a delmhorst J-2000 MC meter Doc so I'm set there. Also have a dehumidifier but ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (6/1) -- In my experience years ago some dehumidifiers will shut off at higher temps because of ...

    finishing massive redwood top on Kauai
    A message posted at WOODWEB's Furniture Making Forum (7/30) -- I am researching the the various aspects of a job that I haven't committed to yet. The ...

    Re: Very small batch to dry (two boards)
    A message posted at WOODWEB's Sawing and Drying Forum (3/29) -- For that size, I'd buy a 1965 Plymouth Barracuda! LOL Or, I'd build a little insulate ...

    Re: Steaming for the purpose of conditioning.
    A message posted at WOODWEB's Sawing and Drying Forum (11/28) -- Injection of steam into the air at room temperature has an EMC of around 22% MC, so ...

    Re: How long to heat to sterilize wood
    A message posted at WOODWEB's Sawing and Drying Forum (8/28) -- Species is yellow pine. Not sure what the small boring insects were. The boards were ...

    Re: Drying wood in a tropical climate
    A message posted at WOODWEB's Sawing and Drying Forum (5/28/22) -- You are talking about removing gallons and gallons of water from the wood. I've no ...

    Re: Keeping Lumber Dry
    A message posted at WOODWEB's Sawing and Drying Forum (3/28) -- If the lumber is dry and the building is well built so it does not let moisture into ...

    heat treating
    A message posted at WOODWEB's Sawing and Drying Forum (6/27) -- several weeks back I staked with 1 inch spacers 2 inch pine boards in an insulated ro ...

    Drying wood in a tropical climate
    A message posted at WOODWEB's Sawing and Drying Forum (5/26/22) -- I am in Thailand, where the RH on a normal day ranges from 45% to 80%, which IMHO ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Dehumidifier because it adds heat. John ...

    Re: Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (4/25/22) -- Johnson controls makes temp controllers. I got mine for $65. For temp monitoring a ...

    Re: Wax finish not drying
    A message posted at WOODWEB's Finishing Forum (10/24/24) -- Welcome! Don't worry; we're all here to help each other out. It sounds like you’re dealin ...

    Re: finishing massive redwood top on Kauai
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Hi Kim, In simple terms. Don't be intimidated by this project, you've got time, tackle ...

    Interior door construction question
    A message posted at WOODWEB's Architectural Woodworking Forum (8/23/23) -- We need to have doors made to match existing vertical wood paneling, which ...

    Re: Kiln Advice
    A message posted at WOODWEB's Sawing and Drying Forum (4/23) -- The wood lined kiln is not functional in the US for hardwoods. You need a dehumidifie ...

    Re: storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- dr. gene - thanks for joining the conversation. everything you said is in lin ...

    Re: storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (4/21) -- can someone please riddle me the difference between an unconditioned (let's s ...

    Re: Dehumidification H20 output monitoring
    A message posted at WOODWEB's Sawing and Drying Forum (2/21/22) -- If you stay below 110F a household dehumidifier works fine with AD lumber. Above a ...

    Re: Dehumidification H20 output monitoring
    A message posted at WOODWEB's Sawing and Drying Forum (2/21/22) -- What dehumidifier are you using? ...

    Re: Drying Red OAK 4X6 Green Wood
    A message posted at WOODWEB's Sawing and Drying Forum (1/21) -- Oak is a very hard specie to dry because it is very prone to checking and splitting. ...

    Re: Help! Black spots on Cherry
    A message posted at WOODWEB's Finishing Forum (7/20) -- Use distilled water, not tap. This time of year, use the condensation water from AC or dehumi ...

    Re: Resawing air dried black walnut
    A message posted at WOODWEB's Sawing and Drying Forum (5/20) -- A table with a 4" top will never be stolen. lol FWIW: I cut my slabs at 2 3/8&qu ...

    Re: storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (4/20) -- dave - 1/16" deflection on thin sticking doesn't seem like much. was tha ...

    Re: 6/4 8/4 maple drying
    A message posted at WOODWEB's Sawing and Drying Forum (4/20) -- Thank you again for your help. My MC of my hard maple is at 24% right now and my wet ...

    Re: homemade kiln
    A message posted at WOODWEB's Sawing and Drying Forum (11/19) -- Yes, yes and no. A heat pump kiln is also called a dehumidifier. The heat is pumped ...

    Re: homemade kiln
    A message posted at WOODWEB's Sawing and Drying Forum (11/19) -- That won't work very well or last very long. It will use a lot more energy than if y ...

    Re: Dehumidification H20 output monitoring
    A message posted at WOODWEB's Sawing and Drying Forum (4/19) -- That's how I did it with my homebuilt dehumidification kiln. I ran a hose from the de ...

    Re: Final stages in dh kiln
    A message posted at WOODWEB's Sawing and Drying Forum (1/19) -- You seem to have a great understanding of the EMC of air as related to the MC of wood ...

    Oil based paint will not dry, over tinted?
    A message posted at WOODWEB's Finishing Forum (7/18) -- Hello all, I have a kitchen island I painted in oil based paint(customer request). After six ...

    Dehumidification H20 output monitoring
    A message posted at WOODWEB's Sawing and Drying Forum (4/18) -- Putting home-built shipping container dehumidification dryer to work soon. Limited to ...

    Re: storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- I'm not too sure whether you can get an air conditioner unit installed into ...

    Re: Thick, Large Black Walnut Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- Any air conditioner is simply a large dehumidifier hence the need for condensate drai ...

    AC/Dehumidifier in home sprays with Milesi
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- Does anyone incorporate a portable AC/dehumidifier unit in their in home sprays to speed u ...

    Re: Ideal temperature / humidity for solid timber furniture
    A message posted at WOODWEB's Furniture Making Forum (10/16/23) -- Cupping in solid oak tables can indeed be caused by fluctuations in humidity and t ...

    Re: supplemental heat for solar kiln to kill bugs
    A message posted at WOODWEB's Sawing and Drying Forum (1/16/22) -- Well, I had posted a photo, but it's never a sure thing on this site, so let's try ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/15) -- I didn't go with the reefer body but something wider. The reefer body is awful tight ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/15) -- If you look about half way down on the left in the top picture there is a cut out tha ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/15) -- I wonder if you could help me with another question. Ebac brand DH kilns come in a sm ...

    Re: Kiln Advice
    A message posted at WOODWEB's Sawing and Drying Forum (2/15) -- was your dehumidifier kiln indoors i am trying to decide on something to speed up my ...

    Re: Large Scale Drying
    A message posted at WOODWEB's Sawing and Drying Forum (12/14) -- We are not very concerned about color. Doesn't have to be white. We are already able ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/14) -- I have a 40' with a Nyle L200 and a track system to load?unload. Works pretty good ...

    Air drying black walnut
    A message posted at WOODWEB's Sawing and Drying Forum (8/14) -- I have recently moved some 5/4 black walnut into the shop in preparation for an upcom ...

    Quickly reverse timber shrinkage?
    A message posted at WOODWEB's Furniture Making Forum (3/14) -- Hi all, I'm looking for some advice about slightly increasing the moisture content of ...

    Re: Ideal temperature / humidity for solid timber furniture
    A message posted at WOODWEB's Furniture Making Forum (8/12/23) -- Cupping in solid oak tables can indeed be a result of fluctuations in humidity and ...

    Rank 6 methods of stabilizing moisture level of small kiln dried boards
    A message posted at WOODWEB's Sawing and Drying Forum (5/12) -- Hi everybody, I am looking for good methods of stabilizing moisture level of small ki ...

    Drying Wet Plywood in a Boat
    A message posted at WOODWEB's Sawing and Drying Forum (12/11) -- I was recommended I post on this site a question relating to drying marine plywood o ...

    Guidance for drying Doug Fir timbers in solar kiln
    A message posted at WOODWEB's Sawing and Drying Forum (6/11) -- Rebuilding my garage/shop that was lost in the Santa Cruz fire last August. Doug Fir ...

    Re: Guidance for drying Doug Fir timbers in solar kiln
    A message posted at WOODWEB's Sawing and Drying Forum (6/11) -- My mill is a Lucas 7-23 swing arm mill. I will also be milling and drying redwood (1& ...

    Re: Sawing white oak or red oak for flooing
    A message posted at WOODWEB's Sawing and Drying Forum (2/11) -- I made a 1700 sq ft. red oak floor for our new house. I used air dried , then dried i ...

    Re: supplemental heat for solar kiln to kill bugs
    A message posted at WOODWEB's Sawing and Drying Forum (1/11/22) -- I have a Timberking mill and harvest logs off my property, cut them into lumber or ...

    Advice for setting up small finishing room
    A message posted at WOODWEB's Finishing Forum (1/11) -- Hello everyone... Im trying to convert a small room on the back of my garage into a stain/fin ...

    Re: Solid table tops
    A message posted at WOODWEB's Furniture Making Forum (8/8) -- Red oak or white oak? How wide? What was the wood moisture level when you started? Boug ...

    Re: Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (4/8/22) -- If you shop for a dehumidifier kiln, make sure it has the ability to bring the whol ...

    New Cabinet shop design help and machinery suggestions
    A message posted at WOODWEB's Cabinetmaking Forum (3/8/22) -- Hello Everyone I am new here and looking forward to speaking with some people. I have r ...

    drying spalted pine mantle
    A message posted at WOODWEB's Sawing and Drying Forum (12/7) -- I had not milled in awhile, and had a friend who wanted some junk wood for his firepl ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/7) -- I have a 53' reefer trailer with hinged doors. And use the nyle L200M works good but A ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/7) -- You are confusing FPM and CFM. FPM is the velocity of the air and when average air vel ...

    Re: air drying ash
    A message posted at WOODWEB's Sawing and Drying Forum (4/7) -- Wayne I am in Ontario, so weather kind of similar. You won't get much drying over the ...

    Re: controlling the humidity in kilns
    A message posted at WOODWEB's Sawing and Drying Forum (2/7) -- In this colder weather, it is not uncommon to find that the floor or other area withou ...

    drying to single digits p2
    A message posted at WOODWEB's Sawing and Drying Forum (1/7) -- I've built my insulated chamber and have a dehumidifier coming in. My question is what ...

    Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (9/6) -- I'd like to know who has experience utilizing a reefer truck body with a Nyle. I've fo ...

    Re: wood kiln
    A message posted at WOODWEB's Sawing and Drying Forum (11/5/23) -- No my thought is in winter months I would run floor heat to keep concrete warm and ...

    Re: Sterilizing reclaimed wood for kitchen.
    A message posted at WOODWEB's Sawing and Drying Forum (7/4) -- Does anyone venture a guess at how long to hold the temperature at 150 degrees for 1 i ...

    Drying 16/4 Walnut
    A message posted at WOODWEB's Sawing and Drying Forum (3/4) -- Gentlemen , I am seeking council. I have a 16/4” Black walnut slab (44”x9’) that has b ...

    Re: Shotgun Display Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (1/4/23) -- Only advice i can give you is if you use any form of felt on the barrel rest you may wa ...

    Re: drying to single digits
    A message posted at WOODWEB's Sawing and Drying Forum (12/3) -- So it sounds like I'll need a heat source, a fan for circulation, something to monito ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (10/3) -- If you are going to do this, you can put a big dent in your operating costs by orient ...

    Re: drying to single digits
    A message posted at WOODWEB's Sawing and Drying Forum (12/2) -- You should maintain the chamber at about 35% RH and around 90F. Lower temperatures wi ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (10/2) -- We had Nyle build a kiln just like this a year ago. It has 9 fans in it lengthwise an ...

    drying to single digits
    A message posted at WOODWEB's Sawing and Drying Forum (12/1) -- I run into this problem every year. I purchase hardwood (particularly red oak) in the ...

    Re: Drying kiln using a reefer body and Nyle dehumidifier
    A message posted at WOODWEB's Sawing and Drying Forum (10/1) -- I have a Nyle L 200 in a 22 ft cold plate body with a trifold rear door and a track s ...

    Re: heat treating
    A message posted at WOODWEB's Sawing and Drying Forum (7/1) -- I dont think it is a new infestation as I polyurethaned the board quickly following pl ...

    Re: wood quality
    A message posted at WOODWEB's Architectural Woodworking Forum (1/1) -- Remember the basic concept that wood does not change its size or shape unless ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- A DH is the same as an A/C from an energy point of view if you put the entire A/C uni ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- I used a cheap DH in my 275 bf capacity kiln for 20 years w/o problems, but I only pu ...

    Re: AC/Dehumidifier in home sprays with Milesi
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Bob N Curious as to your front / back drying schedule for cabinet doors? With solvent CV. ...

    Re: AC/Dehumidifier in home sprays with Milesi
    A message posted at WOODWEB's Finishing Forum (7/19/23) -- We use 2k on doors in the shop and they are finished before we go to spray in the home. Ou ...

    Re: AC/Dehumidifier in home sprays with Milesi
    A message posted at WOODWEB's Finishing Forum (7/19/23) -- Are you using 1k or 2k? I use Milesi 2k and I don't have any drying issues. After spraying ...

    Re: Kiln Advice
    A message posted at WOODWEB's Sawing and Drying Forum (8/8) -- i built a small (13x13)kiln,for specialty wood,spalted maple,hickory,burlwoood & l ...

    Re: Target MC Reduction/day for Yellow Poplar
    A message posted at WOODWEB's Sawing and Drying Forum (11/7) -- Thanks Gene, That sheds light on the history and conditions and certainly the evoluti ...

    Re: Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (11/6/23) -- In case someone is interested in controllers. AC Infinity controller is WiFi, so c ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/6) -- Your square corners (walls meeting ceiling) are part of the problem. The air hits flat ...

      ---   Return to Top   ---     


    Shop Built Equipment Gallery Results:

    Mobile Nyle dehumidification kiln
    Mobile Nyle dehumidification kiln Listing #121 Listed on: 2014-04-04 16:55:27

      ---   Return to Top   ---     


    Sawmill Gallery Results:

    Western Cedar Fence Busters
    Western Cedar Fence Busters Listing #219 Listed on: 2009-02-10 19:54:09

    Best Cabinets & Sawyers
    Best Cabinets & Sawyers Listing #70 Listed on: 2008-02-08 22:32:11

    ARKANSAWYER SAWMILL Inc.
    ARKANSAWYER SAWMILL Inc. Listing #115 Listed on: 2008-03-26 19:05:55

      ---   Return to Top   ---