Below is the publicly available information for this member:
Company: Mid America Woodworking Machinery, Inc.
Location: 6209 Mid Rivers Mall Drive #133
St. Charles, MO  63304
Website: www.machineconsult.com
Categories:


Forum threads this member is participating in:
CNC Forum
  Re: Biesse Rover321 needs post for Biesseworks   02/07
  Re: Tooling file in Biesseworks   02/07
  Re: biesse   04/25
  Re: Biesse Rover 321R   06/05
  Re: Biesse NC500 Software   06/19
  Re: Pausing in Woodwop, HOPS, and Biesseworks   03/16
  Re: Pausing in Woodwop, HOPS, and Biesseworks   03/17
  Re: Looking for tooling recommendations for CNC router   05/23
  Re: Tool holders   05/02
  Re: Hooking a bieese vacuum to a biesse Klever using side plug   05/23
  Re: Duct Design Service   07/23
  Re: Kinetic Dust Extractors   09/16
  Re: Corrugated Head for Router   10/20
  Re: Long dowel drills   01/11
  Re: Learning Biesse CNC on the job   01/18
  Re: Morbidelli x200   05/19
  Re: B Solid   06/30
  Re: best bit for 1/2" baltic birch   07/20
  Re: Add new tool to Biesse NC1000   09/22
  Re: Pods on top of spoilboard   11/02
  Re: Weird Wear On Toolholders and Spindle, What Could be the Cause?   06/30
  Re: vacuum leakage   09/11
  Re: ISO 30 taper   11/29
  Re: cnc tool holders thread direction vs spindle rotation   06/27
  Re: Can anyone write a post from Cabnetware 11 to WoodWop?   07/31
  Re: Drilling 2mm,4mm, 5mm   08/06
  Re: What are you using to program your Biesse Rover   08/15
Dust Collection, Safety and Plant Operation Forum
  Re: 5000 cfm limit   11/26
  Re: 5000 cfm limit   12/01
  Re: 5000 cfm limit   12/01
  Re: VFD and Dwyer Sensors   10/06
  Re: multi 10 hp units vs one large dust collector   12/07