The WOODWEB Update
To unsubscribe, see instructions
at the end of this message.
The Information Resource for the Woodworking Industry, is FREE
to all users.
Thousands of Knowledge Base Articles, Product Directory,
Lumber Exchange, Job Opportunities...
In this issue:
Buying Guides Updated
pricing on hardwood lumber for all regions of the US:
shop owner heaves a sigh of relief after his SawStop tablesaw
saves an employee's
thumb, instead of severing it.
the challenge: a kitchen island that can be rolled or locked
into place, but
keeps its hardware hidden.
water based finished that was once reliable is now problem-ridden.
a thorough review of the product literature, this door builder still
decide whether to make the leap from traditional machinery to
CNC. Any advice?
issue of the WOODWEB Update is sponsored in part by|
End of Summer Special!
Purchase AutoCabinets or RouterCAM and receive
your choice of
Dovetail DrawerCAD, MDFDoorCAD, CountertopCAD or
Please call or email us for an online demo
Check out Garry Smith's website and Project Gallery listings,
about his business, WoodWorks by Garry, at:
Becoming a member at WOODWEB is
free, easy, and offers many
benefits. At your personal Control Panel, you can:
Create a Member Profile.
- Receive notifications of new posts at your favorite
Forums and Exchanges.
- Access a list of your current posts at the Forums and
- Create a list of links to your favorite pages at WOODWEB.
- Use Forum and Exchange post forms that are automatically filled in with
Sign up and become a member
Veneer Systems Inc. features
a case clamp demonstration showing an
operator control panel and unload/set
upright control station. Also
covered are loading table, base air jets, recirculating
multi direction rollers and photocell. To view the video, click
on the link
below and scroll down to the Veneer Systems video link:
|This issue of the WOODWEB Update is sponsored
in part by|
C.R. Onsrud, Inc.:
Manufacturer of CNC routers,
inverted routers, and routing accessories
Video Demos OnlineMachine
Specifications24 Hour Parts and ServiceUser
Is buying a CNC
a good move for a small shop facing cut-rate
competition? This long and thoughtful
thread compares the advantages
of a CNC router to other efficient setups. http://www.woodweb.com/knowledge_base/Whether_to_Invest_in_a_CNC_Router.html
a hollow log is useful only to a chipmunk? Think again! Don't throw
oak shell away... You might need it someday. Submit your own
uses through the
"add information to this article" link at the bottom of the
ever said woodworkers were an unfashionable lot? This article is
the right dress and grooming strategy for a woodworker who
wants to make a
good impression on customers. http://www.woodweb.com/knowledge_base/Professional_Dress_for_Woodworkers.html
more than one way to make fresh new lumber resemble timeworn
barn wood. Here's
a choice of methods. http://www.woodweb.com/knowledge_base/Matching_the_Look_of_Aged_Barnboards.html
nibs at the entry and exit points of CNC cuts are causing a problem.
the bits be deflecting, or is there some other cause?
thick wood dowels into walking cane shapes calls for a little
With proper grain orientation and MC levels, success
can be had..
Additions to the Woodworkers Directory
following companies recently created free web pages at the
Create yours at:
shop-built sliding table saw is detailed here. Find out what parts were
and how this homemade tool works at:
To UN-subscribe, change your address, or contact
WOODWEB, follow the
instructions at the end of this message. Replies to this
Update mailing will
not reach WOODWEB.
Find out how to promote your company on the Web. If you're a supplier to
wood industry, visit WOODWEB's Media Kit:
If you're a woodworking professional,
visit the Woodworker's Directory:
View past WOODWEB Updates at:
The WOODWEB Update is Copyright (c)
WOODWEB, Inc. 2010