Architectural Woodworking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: Removing sharpie from raw veneer panel

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

Removing sharpie from raw veneer panel

2/25/20       
Cs

I’m in the middle of a sequence matched wall panel job in white ash veneer.

One of my employees wrote all over the faces of a few panels with a permanent marker, thinking he was labelling the backs.

Any suggestions on removing the ink, or am I screwed?

2/26/20       #2: Removing sharpie from raw veneer pa ...
MarkB Member

Acetone is solvent for sharpie but my guess is it will bleed out and cause a big mess. Major bummer. Gotta love employees.

2/26/20       #3: Removing sharpie from raw veneer pa ...
snugthejoiner

A real craftsman would upsell the client to Ebonized Ash.

2/26/20       #4: Removing sharpie from raw veneer pa ...
rich c.

Screwed

2/26/20       #5: Removing sharpie from raw veneer pa ...
rich c.

Make sure another sharpie ever gets in the shop. Stupid to have them around. Chalk, any color, should be the only thing around except for pencils.

2/26/20       #6: Removing sharpie from raw veneer pa ...
Mark B Member

I have honestly even had issues with guys with pencils marking up face material. Bearing down hard, then telegraphs through after sanding. I honetly never understand why people put marks all over face material that is very near finish. If its going to go through the sander or planer fine, but marking up even solids on a close to finish face...

Guy thought he was on the back face... but..

2/26/20       #7: Removing sharpie from raw veneer pa ...
Alan F.

There are some furniture touch up guys that can work some magic and hand draw grain and color in, depends on the lettering, how big it is and where you are.

Otherwise replacement panels.

We mark edges, we draw an arrow on the bottom edge (if the supplier doesn't) before cutting pointing to the face, once there is edging / coating /finish on the panel then they label the back.

We use pencil on the top or bottom edge after banding and before finish.

Develop and maintain a system. We sometime get G1s panel with the back the same materiel but a different match or same match, some veneers its hard to tell.

Some are simple but when we do a random match sometimes the back "looks" better than the face. Its like the old adage measure twice, cut once.

Employees need to check and make sure before they mark.

The attached panels had pretty bad field damage and grooves in them, the touch made it impossible to see.
Unfortunately I had to resize the picture to post it and it lost a lot of detail.


View higher quality, full size image (3024 X 2268)

2/26/20       #8: Removing sharpie from raw veneer pa ...
Jared E

I'd be tempted to remove the employee with a strong solvent.

2/26/20       #9: Removing sharpie from raw veneer pa ...
Charles

Does the company that did the layup have the log available? We lay up a lot of panels, when we do a big deal matched table or wall panel sequence, we keep the log around until the project is installed.

Take a sample board and replicate the ink mark. Try acetone but blot it, don't rub. If it comes off and still has a grey look, try Try oxolic acid to bleach it. If you are staining the project, you might get lucky.

Otherwise, the guy who said you're screwed wins the day

2/26/20       #10: Removing sharpie from raw veneer pa ...
Mark B Member

My honest attempt at a nightmare possibility for a save would be to use a shop vac with a pencil type tip and a squeeze bottle applicator to flood the sharpie and the shop vac sucks the solvent and sharpie out.

I see it as a total failure as there will still be bleeding, you will likely have marring/burnishing on the face from the shop vac. And then you will be best to wash all the panels with acetone to solvent blend them all together but the halo of the marker could still rear its ugly head on the very last coat of finish or 3 minutes after install.

Painfull.

2/26/20       #11: Removing sharpie from raw veneer pa ...
Alan F.

The problem is, you may not know what shows until its in the room it goes in with different lighting and installed.

At that point you have fixing labor, fabrication labor, finish labor, delivery and installation.

If the cost of the panel material is $320 each and that's $960 materials.Then the fabricated and installed cost of labor is $3200 in labor and OH.

If doesn't work, you spend the $4160 (failed first time fix, rejected after install)
again so spend up to $7,360 to save 960, if it was the other way around I would do it in a heartbeat.

I would put a few hours into 1 panel and see if I could save it and then order replacement panels.

2/26/20       #12: Removing sharpie from raw veneer pa ...
TonyF

Cs:

I would wonder if any of the chemistry used in dry cleaning would have an advantage over any of the solvents that we typically have lying around.

Perhaps your local store might be able to help, as they tend to have success in removing stains like this without leaving a residue.

Can't hurt to ask. Hope this helps.
TonyF

2/27/20       #13: Removing sharpie from raw veneer pa ...
rich c.

Dry cleaners used to use acetone, they still might. But nothing is going to remove 100% of the color.

2/28/20       #14: Removing sharpie from raw veneer pa ...
Adam

The solvent in permanent markers is alcohol not acetone. Acetone will work as well as any aggressive solvent like toluene or xylene.

It’s kinda like alcohol is the solvent for shellac. But acetone will aggressively attack shellac.

I agree with everybody else. If you can’t sand it off you are doomed. Try your best to not castrate your employee.

The problem is we use markers on all kinds of other things around the shop. That and blue tape. I can’t say I’ve ever had the inclination to write on wood with a marker. It wouldn’t even be legible.

2/29/20       #15: Removing sharpie from raw veneer pa ...
rescraft

Dry cleaners used to use carbon tetrachloride--doubt you can find that around anymore. Probably on the same warehouse shelf as DDT :)

3/14/20       #16: Removing sharpie from raw veneer pa ...
Larry K Schweitzer

We had a sequence match job that had two panels get damaged beyond repair. We ended up buying an entire unit and going through it looking for the best match we could find. Got lucky and found really good matches but expensive.

4/2/20       #17: Removing sharpie from raw veneer pa ...
KCR Member

I'm coming in late on this post and really don't have any more to offer as to how to fix this anyway. I want to make a comment about Mark B's suggestion to use a shop vac to suck up a solvent sprayed onto the work piece. Very bad idea. Shop vacs don't necessarily have totally enclosed motors and you risk a fire or explosion doing this!

4/2/20       #18: Removing sharpie from raw veneer pa ...
KCR Member

One more point, the solvent may melt down the plastics in the shop vac and ruin it permanently.

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Doucet Machinery
    Sponsors

    Become a Sponsor today!