Blum
2/27/22
I was short 4 sets of 21” tandems,so I had to steal them from draws I had at shop.I have 563f533 that work but the shop ones are 563f525.they don’t seem to work or have to fight with them.I do have 3/4 draws and the f works with that and 21” draws is 533,so do I have to shorten the draws to 19 5/8(525)?the slides came from roll outs?
2/27/22 #2: Blum ...
My New Yankee Workshop translator is currently down...
Out of Blum?
This can't be!
Might visit Blum website or catalog for dimensions
Blum!
On backorder!
Wonderment!
Best of luck to you
3/3/22 #4: Blum ...
I went as far as getting on blum's website. I clicked on open positions and seen a position open for a 3rd shift production supervisor, which I applied for with my resume being my displeasure of the current situation as a 1 man cabinet shop that can't finish a job because of no hardware. Thought there was no better job in the world to have then a production supervisor of a plant that doesn't seem to produce. they want to pay me 150K to put my feet up I'll certainly do it, I'd even offer to work remote so they can save the office space. these are frustrating times being a blum customer, big players are probably buying everything available if they are producing, be nice if they took care of the little guys first.
3/5/22 #5: Blum ...
Ok the code of 563f525 means draws have to be 20 11/16(525),as oppose to the563f533 that I always use is 21 inches.I just don’t understand why they would make that little of different slide,like I said had them in shop and need them to complete job,oh well.