• Knowledge Base Search Results: 879
  • Forum Messages Search Results: 613
  • Project Gallery Search Results: 1357
  • Shop Gallery Search Results: 1
  • Shop Built Equipment Gallery Search Results: 37
  • Sawmill Gallery Search Results: 51
  • Sawing and Drying Directory Search Results: 1
    • Your search for woodweb found 92626 documents (of 103220 searched).
    3001-6000 of the 92626 results are displayed below.
      


    Knowledge Base Results:

    General Woodworking at WOODWEB's Bookstore
    General Woodworking at WOODWEB's Bookstore

    Boatbuilding at WOODWEB's Bookstore
    Boatbuilding at WOODWEB's Bookstore

    Drying Capitol Christmas Tree Slabs
    Despite several interesting suggestions, Woodweb fails to provide a secret formula for drying cross-sections of a pine tree trunk with no radial checking. Still a fun thread, though. August 16, 2012

    Employer Vs Employee
    Must employees and business owners be pitted against one another? From WOODWEB's Business Forum. March 5, 2003

    A Finish Carpenter's Guide to Understanding Moisture Movement In Wood
    Wood Doc Gene Wengert supplies a scientific and practical explanation of wood moisture content and seasonal movement. December 15, 2009

    Calculating a Shop Rate
    An extended discussion on the math and reasoning behind setting a rate for shop work billed by the hour. July 30, 2009

    Scribing Skirt Boards (Step By Step Photo Essay)
    Carl Hagstrom's detailed step-by-step photo essay (starring Carl's younger and better-looking stunt double) showing how to scribe a skirt board for a staircase stimulates a well-informed expert discussion of site and factory stair-building methods. February 15, 2015

    Choosing Wood and Finish for Church Doors
    Woodweb pros weigh in on material choice for a set of chapel doors. November 30, 2009

    MDF versus particleboard
    Strength and other qualities in relation to cabinet construction. (From WOODWEB's Cabinetmaking Forum) March 23, 2003

    Self Air-Drying Versus Kiln-Drying
    Carefully air-drying wood yourself may be preferable to trusting the load to a less-than-perfect kiln-drying operation. January 18, 2011

    Door Construction and Wood Movement
    Experienced pros try to educate a newcomer about the power of wood movement and the necessity of allowing for it in constructing complicated assemblies such as architectural doors. May 12, 2013

    Staining Alder
    Alder is an under-appreciated wood that takes stain and paint well. Here, finishers discuss how to get the best results with it. October 26, 2005

    Keeping cutterhead balance
    Number of knives and other factors in cutterhead balance. (From WOODWEB's Solid Wood Machining Forum) March 5, 2003

    Color matching and grain repair
    Learning the necessary skills. (From WOODWEB's Finishing Forum) January 21, 2003

    Ellipse jig
    Making your own jig for ellipse-based arcs. (From WOODWEB's Cabinetmaking Forum) March 5, 2003

    Historic Roller Track Door Hardware
    Here's some great architectural woodworking history: a look at old track-and-roller pocket door hardware with some original ads and patent documentation. November 14, 2014

    Advertising alternatives
    What are the best-bang-for-buck advertising venues for woodworkers? November 7, 2000

    WOODPRO - Species Selection Made Easy
    A free complete working computer program (that can be downloaded at WOODWEB), allowing woodworkers to select the most suitable wood species for any particular application - 1997

    Clamp Retrofits for Sliding Table Saws
    Here's a discussion of site-built clamp setups for the slider, with some instructive photos. June 17, 2009

    Attaching Cabinets To Concrete Or Steel Stud Walls
    Pros give tips on cleats and specialty screws. April 14, 2005

    Flooring Joint Profiles
    Is it okay to saw strip flooring with a flat shoulder joint instead of a V groove? June 4, 2012

    Cold Calls
    One cabinetmaker describes how he succeeded with a determined program of cold sales calling. June 4, 2012

    Drying Oak Lumber: Step 3B, Sample Boards
    How to select sample boards for accurate measurement of moisture content and drying rate. August 16, 2012

    Evening Out Finish Tones
    Maintain an even stain by applying multiple thinned coats. March 12, 2006

    Another Case for the Wood Detectives
    Woodweb's tree identification team is never afraid to tackle another gnarly log. January 29, 2009

    Constructing a Bandsaw Mill Frame
    Video show and tell of the construction of a bandsaw mill. April 2, 2015

    Financial Success in Woodworking
    Philosophies and turning points on the path to $100K a year. January 6, 2005

    Who Are You? Thumbnail Biographies of Forum Members
    Ever wonder who you're interacting with on WOODWEB? In this thread, forum posters give a brief history of their lives in the woodworking trade. June 16, 2014

    Vacuum kiln drying
    How do vacuum kilns work and how effective are they? (From WOODWEB's Sawing and Drying Forum) January 21, 2003

    Determining left and right hand doors
    How do you keep them straight? (From WOODWEB's Architectural Woodworking Forum) March 5, 2003

    Burning Sawdust in a Wood Stove
    You can burn sawdust for heat, but the stories in this thread make it clear that the practice is a risky one. February 15, 2015

    Black Locust Durability for Outdoor Decking
    A discussion of the suitability of Black Locust wood for outdoor use as decking or for benches. May 6, 2009

    Black streaks in birch
    Searching for clues to the cause of black streaks, showing up in birch dowels during manufacturing. 1998.

    Predicting Shrinkage in European Beech
    How to anticipate the amount of moisture-related wood movement in European Beech. April 18, 2010

    Best Outsource Door Manufacturer ??
    09/30/2014

    Affordable Sanding Options for the One-Man Shop
    In yet another take on a frequent forum topic, shop owners compare the pros and cons of drum sanders, wide-belt sanders, and stroke sanders.March 13, 2014

    Drawer runner holes in 32mm system
    Placement, mounting and more. (From WOODWEB's Cabinetmaking Forum) February 12, 2003

    Store-bought and home-built log trailers
    Suggestions on buying and building log trailers and loaders. (From WOODWEB's Sawing and Drying Forum) January 21, 2003

    Tapered Craftsman Porch Columns
    A long discussion of the materials and joinery needed to reproduce this traditional architectural element. February 5, 2007

    Holding Down Small Parts on a CNC
    Making vacuum work: details on gasket, pod, and custom spoilboard techniques for holding small workpieces down on a CNC table. February 1, 2015

    Distinguer le chêne rouge du chêne blanc à l'aide de la chimie
    Le nitrite de sodium décolore le chêne blanc, mais pas le chêne rouge. Regardez la photo. 14 janvier 2009

    Cyanoacrylate adhesive
    How does this glue work for gap filling? (From WOODWEB's Finishing Forum) March 23, 2003

    Pricing Custom Cabinets and Trim
    Even within one local market, prices can be all over the map. Balancing careful itemized estimating against local market conditions can help you turn a decent profit. August 23, 2006

    Lamination and Springback
    A chair back curvature problem leads to a discussion about predicting and minimizing springback in bent wood laminations. December 6, 2009

    wood
    Wood at WOODWEB's Bookstore

    Lumber at WOODWEB's Bookstore
    Lumber at WOODWEB's Bookstore

    Furniture Design at WOODWEB's Bookstore
    Furniture Design at WOODWEB's Bookstore

    Forestry at WOODWEB's Bookstore
    Forestry at WOODWEB's Bookstore

    Wood Properties - The Wood Doctor Collection of Articles at WOODWEB
    Wood Properties - The Wood Doctor Collection of Articles at WOODWEB

    Tooling tips for African wawa
    More important than knife angles to obtaining a smooth machined finish is feed speed. 1998.

    Advice about Starting a Cabinet Business
    Cabinetmakers deliver several truckloads of advice to a young person with some start-up cash and a lot of enthusiasm. October 25, 2006

    Developing Software to Calculate Wood Kiln Schedules
    The wood drying process is complex, and involves many inter-related variables. So creating software to determine drying schedules is a challenge. June 13, 2014

    Usability Of 12/4 Quarter Sawn White Oak
    01/20/2014

    Cabinet Shop Marketing Ideas
    11/07/2014

    Responsibility for a Too-Dark Finish
    A cabinetmaker is being asked to hold the bag for the poor work done by a painter who the customer hired. In this thread, professionals suggest ways to handle the problem. November 11, 2005

    Touching up conversion varnish
    Problems related to conversion varnish touchup. (From WOODWEB's Finishing Forum) January 21, 2003

    Custom Fabricating Louvered Shutters
    A long and chatty thread about whether, why, and how to build your own louvered wood exterior window shutters. April 24, 2006

    Designing a Unique Rocker
    Inspired by Nakashima's "Conoid" chair, a Woodweb member gets advice and criticism from the Furniture forum before creating, and executing, his unique vision for a custom rocking chair. March 16, 2015

    Finishing an Extra-Large Table Top
    Advice on positioning a large table top to be accessible for convenient spraying. March 28, 2010

    Setting Up a 32mm Stop System
    Tips on the "Sticks" 32mm stop system from Metricks, and general advice on getting started with 32mm Euro cabinetry methods. August 31, 2009

    Scribing a Template to Fit A Countertop Between Three Walls
    Here's a long, detailed thread about scribing a custom template for cutting and fitting countertops into tight spaces. December 27, 2007

    Multimedia Installations -- Hardwoods and Tile, Stone, Marble, Metals and Glass
    Complementary materials enhance hardwood installations. December 4, 2001

    Dry lumber kiln -- buying your first
    Business and technical considerations when getting started in kiln drying. March 19, 2001

    Solar kilns - putting it all together
    Compiling and analyzing information on the efficient design and construction of a solar kiln. November 22, 2003

    Humidity Control and Cabinetmaking
    A cabinetmaker gets an introduction to moisture-related wood movement and humidity control. July 25, 2010

    Troubleshooting a Veneer Splicer
    Detailed advice on getting good performance from a finicky veneer splicing machine. November 5, 2013

    Stability in a Large Solid Wood Table Top
    Pros discuss moisture-related movement and the associated design issues in a big table top. July 24, 2006

    Another Wood Identification Mystery
    The Woodweb detective team works on another wood identification case (probably Maple, this time). March 28, 2010

    Milling Big Logs and Root Balls
    This is a very basic discussion of investing in a chainsaw mill for cutting large butt logs, but it has some nice photos in it.March 13, 2014

    Sanding and Rubbing Out Spar Varnish
    Tricky problem: eliminating brush marks and restoring an even gloss to spar varnish — after the piece is installed. April 19, 2011

    CAD for Cabinet Layouts
    Cabinetmakers discuss drafting alternatives for visualizing cabinet designs. August 24, 2008

    Removing Black Stains from Oak
    Advice on getting water stains out of Oak. January 24, 2010

    Reclaimed Wood Flooring Over Concrete
    Advice on vapor barrier installation and attachment method for an unusual floor assembly. May 19, 2011

    websites
    Should your business have its own website? Pros share experiences and discuss the worth of a web presence. June 12, 2005

    Wood Movement Worries with Large Wainscot Panels
    Oversized floating panels are likely to grow and shrink too much to be practical. Here are some explanations, and advice on substitute materials. August 12, 2014

    Unmanned CNC
    Can you safely allow a CNC router to run unattended? August 22, 2013

    Drying Oak Lumber: Step 1, Assessing the Raw Material
    The first step in drying Oak is to know the characteristics of the lumber you're planning to dry. July 29, 2012

    History Snapshot: A World War II Wooden Airplane
    A video and discussion of an Australian World War II fighter plane built with wood and glue. February 19, 2013

    What the Heck is "Honduran Black Walnut"?
    Woodweb pros discuss the opportunities, risks, and unknowns inherent in buying lumber from foreign sources at arm's length. September 7, 2013

    Refrigerator Cabinet Installation Details
    Pros share tips and tricks. May 4, 2005

    Door Gap and Outdoor Humidity
    A woodworker gets expert advice on predicting the moisture-related dimensional changes in a wood door, for purposes of calibrating the door gap to allow for the movement. October 11, 2007

    Square foot vs board foot
    Defining the difference. October 2, 2001

    Dust Combustion: Will Your Shop Explode?
    A collection of useful links about the risk of woodshop dust fires or explosions, and about preventive measures. June 15, 2014

    Straight Line Rip Saw Problems 1: Erratic Cuts
    Maintenance and troubleshooting checklist to ensure consistent, good-quality cuts from your straight line rip saw. January 4, 2007

    Witness Lines from Shellac Application
    Advice on hand-applying and sanding shellac in combination with transtint dyes and linseed oil. July 7, 2011

    Sample Subcontractor Agreement
    Spelling out the parameters of the work and relationship to avoid legal problems. April 4, 2004

    Lightening Up Alder
    Alder mellows out naturally over time, but you can choose a finish that keeps it headed the way you like it to go. July 3, 2008

    Drying Oak Lumber: Step 2, Stacking
    Another chapter in the Wood Doctor's introduction to wood drying. August 16, 2012

    Outside-the-Box Marketing Ideas
    Here's a list of creative marketing ideas from a seasoned cabinetmaker. March 3, 2010

    Vacuum Lifters for Melamine Sheets
    Advice on shopping for shop equipment that takes the heavy lifting out of loading melamine onto the CNC table. July 15, 2014

    Drying Oak Lumber: Step 3A, Measuring Moisture Content
    The only reliable method of measuring high MCs is to use the oven-drying method. August 16, 2012

    Straight Line Rip Saw Problems 2: No Glue Joint
    Troubleshooting checklist to ensure a good glue-joint surface on ripped edges. January 4, 2007

    Straight Line Rip Saw Problems 4: Troubleshooting Wedges
    Checklist for identifying and correcting problems that can cause a straight line rip saw to cut out of parallel. January 4, 2007

    Straight Line Rip Saw Problems 3: Edges Not Square
    Troubleshooting checklist to identify and fix maintenance issues that cause out-of-square rips. January 4, 2007

    Jig for beaded faceframes
    Photographs of a shop-built jig. June 4, 2003

    Storing kiln-dried lumber
    Controlling the humidity in the atmosphere around stored lumber. January 16, 2002

    Water-based lacquer for small shops
    Things small shops should consider when switching to water-based lacquers. 1998.

    Identifying "Diamond Willow"
    Woodweb members recognize the unique shape of "diamond willow." Here's a photo. February 1, 2015

    CNC Modification: Remote Control Cooling
    Informative video: a CNC owner adds an air blasting hose and nozzle with remote control to his equipment. September 25, 2014

    A source for submerged wood
    A supplier for lumber cut from submerged logs is provided.

    Low-cost kiln plans
    Information sources for constructing low-cost kilns. 1998.

    Drawer Slide Installation Excel Spreadsheets
    Handy spreadsheets supply installation specs for several types of cabinet drawer slides. January 7, 2007

    Wood, the environment, and Man
    A wide-ranging overview of the state of the primary processing industry, and where it may be going from here. August 10, 2000

    Bleaching, Pickling and Antiquing -- Hardwood Flooring and Millwork
    Customized hardwood finishes offer new decorative dimension. December 3, 2001

    Building a bandmill from scratch
    Advice and examples concerning home-built mills. (From WOODWEB's Sawing and Drying Forum) January 21, 2003

    Dowel drilling and use guidelines
    A quick guide to dowel clearances and practices, including drilling depth, diameter-to-edge ratios, and dowel selection. 1998.

    Finishing maple and birch
    Maple and birch are notorious for not taking stains evenly. Here are tips for achieving color uniformity in these popular, durable woods.1998.

    Gluing Teak
    More suggestions on joint prep and adhesive selection for this oily wood. December 20, 2005

    Profit Percentages
    Here's a long and thoughtful discussion about profit — how much is typical in cabinetmaking, and how to go about increasing it. November 23, 2012

    Photographing Kitchens Professionally
    Recommendations on creating high-quality shots of your work. April 2, 2004

    Price sawmilling by the cut?
    Pricing by the hour, the board foot and the cut. (From WOODWEB's Sawing and Drying Forum) February 12, 2003

    Bevel Cuts for Slope-Sided Boxes
    Here's a long discussion of a tricky compound-angle problem: how to calculate the bevel cuts for a box with sides of different slopes. October 8, 2005

    Pricing Out a Bookcase Design
    A customer's design based on an existing manufactured product probably can't be made for a cost that's competitive with the original. June 4, 2012

    Building Your Own CNC Machine
    It won't be a top-end machine — but if you build one, you'll learn a lot. November 27, 2012

    Home-built solar kiln
    Fully illustrated details of a solar dry kiln. May 5, 2003

    Planer is tearing-out -- on white oak, but not red
    What could be the culprit when a planer is tearing out on one type of oak, but not another? June 14, 2000

    Breaking Down Big Logs
    An interesting discussion with informative videos about cutting down enormous logs to a manageable size for sawing on a bandsaw mill. April 18, 2015

    Historic Ship Finish Coatings and Treatments
    How did they finish wooden ships, back in the age of sail? A Woodweb member has the answer. September 8, 2014

    Hanging on a Floating Shelf
    Here's a fun addition to the Knowledge Base collection on floating shelf attachment: a woodworker demonstrating how a small shelf will support his own weight. May 15, 2011

    Solar kiln glazing
    Best material choices for a double layer of glaze. April 9, 2003

    Debt, Planning, and Financial Security for a Woodworking Business
    How to get off the treadmill and build wealth. May 20, 2011

    Am I Being Reasonable????
    08/18/2014

    Blind woodworker's story
    A blind cabinetmaker tells the story of his education and career in woodworking. (From WOODWEB's Cabinetmaking Forum) January 21, 2003

    Power Saving Effect of an Inverter on a Resaw
    Here's an interesting discussion of the power savings you can get by using an inverter to start a large electric motor, and of the possible complications involved in doing so. November 5, 2013

    Recovering from a Shop Fire
    Woodweb forum steps up with well-informed advice about how to cope with a catastrophic fire in the wood shop. April 16, 2009

    Marketing to Builders
    A local cabinetmaker gets advice on getting the attention of production builders. June 16, 2005

    Ai-je du chêne blanc ou rouge ?
    Les détectives Woodweb s'attaquent à une nouvelle affaire. 30 avril 2009

    Making Arched Window Casing Trim
    Steam bending is impractical — laminating small strips into an arch shape for moulding stock is the way to go. April 24, 2009

    Cabinet installation tool kit
    A thorough look at the tools professionals take on the job. August 4, 2003

    Installing crown moulding
    Calculations and tools for cutting crown angles. May 17, 2003

    Square Edges and Edgebanding
    Woodweb's Cabinetmaking forum straightens out a shop owner who has been edgebanding after putting cabinets together. Along the way there's a detailed discussion of how to produce square edge cuts, even with basic equipment. March 3, 2009

    Stepping Up to a Shaper
    After burning out yet another router, a one-man cabinet shop owner gets advice on investing in a shaper and some raised-panel cutters. July 3, 2008

    Faut-il coller les panneaux aux montants et aux traverses ?
    La réponse de base est non (ne collez pas les panneaux de porte aux cadres), mais certains points importants ont été soulevés dans cette discussion. 15 novembre 2011

    Répétabilité au niveau du Shaper
    Conseils sur la configuration des façonneuses pour produire systématiquement des moulures identiques à celles d'une série précédente. 16 juin 2010

    Refinishing Old Church Pews
    Thoughts on how to figure out what the original finish is on some church pews, and refinish with a compatible formula. February 13, 2009

    Puis-je compter uniquement sur la colle pour un joint bois sur bois solide ?
    Les colles modernes sont très résistantes, mais une menuiserie soignée, comme un assemblage à tenon et mortaise ou équivalent, fait toujours toute la différence. 26 décembre 2006

    Fixing a fisheyed finish
    Troubleshooting fisheye problems in a conversion varnish topcoat. June 24, 2001

    Achieving a Dark Burgundy Color on Cherry
    Pros suggest formulas and application methods for staining cherry a deep, dark burgundy. July 29, 2007

    Avoiding Runs with Waterbornes
    A discussion of formulas, guns, and techniques to prevent drips and runs. June 30, 2009

    Figuring Helical Trim Twist
    Here's a long and detailed thread with pictures and photos about a real head-scratcher of a problem: calculating, modeling, or mocking up and then fabricating a piece of molding that follows the underside of a helical staircase. January 20, 2011

    - Spreadsheet Calculation Program -- for Curves, Angles, Compound Miters and Springback
    Free downloadable program(s) in both Excel and MS Works, including illustrations that support the formulas.. August 6, 2002

    Use Hardwoods for Building Components
    Describes a system for prefabricating structural units from hardwoods for use in floors, roofs, and walls of a-frame or post-and-beam type construction. The interior face of the unit is decorative paneling; the exterior face is sheathing. Use of the system could reduce prefabricated house constructi ......

    Veneering cylindrical pieces
    Applying veneer to drums. (From WOODWEB's Veneer Forum) January 21, 2003

    Converting Board Foot Pricing to Lineal Foot Pricing
    Let's run through the arithmetic one more time. April 20, 2006

    Gasoline Versus Electric Motors for Powering a Sawmill
    Sawmillers discuss a mill's power needs and the differences between gasoline and electric motors. August 29, 2006

    Lock-Miter and Miter-Fold Joinery with MDF
    Detailed discussion of creating good corner joints when building up a column out of flat MDF. June 28, 2007

    Setting Up to Build Cabinet Doors
    Even if you usually outsource, building your own doors in special circumstances can make sense. Here's advice on machinery and tooling for that scenario. June 16, 2014

    Pricing for Cabinet Finishing
    A furniture finisher who would like to branch out into cabinet finishing gets feedback on how to charge for the service. February 18, 2007

    Has Buried Metal Ever Ruined Your Day?
    Bicycle sprockets, unexploded ordinance ... you never know what you're going to find in a tree. Here are the tales of buried metal contributed by Woodweb members competing to win a metal detector. The contest is over, but the stories (like spikes in a tree) last forever. April 15, 2013

    Vacuum Kilns: Energy Use and Drying Times
    A discussion of the performance you can expect in the real world from a vacuum wood-drying kiln. June 13, 2014

    Loose Tenon Joinery for Breadboard Tabletop Ends
    Here's a detailed discussion of breadboard joinery, focusing on whether loose tenons will serve the purpose in a Mesquite table top.March 28, 2012

    Value of Yard Tree Logs
    Yard tree value is low because of the probability of hitting metal. But some sawyers still take them. December 12, 2008

    Making Money with a Sawmill Business
    Plan with a focus on high-margin production, and you might make money — not just wear out a saw. January 14, 2008

    Sand-Like Imperfections in a Conversion Varnish Finish
    Finishers troubleshoot an unusual flaw. November 26, 2007

    CNC pod table
    Homemade pods and more. (CNC Forum) March 23, 2003

    Finishing Cost (In-House Versus Contracted Out)
    A cabinetmaker wonders why bids he gets to finish cabinets don't match his own cost to do the work himself. The question sets off a long discussion of cost, value, markets, and business strategies. May 17, 2010

    Matching Stain Jobs on Black Walnut
    Along with stain characteristics, wood grain is an important factor in matching a finish. April 29, 2012

    Finishing Pine
    WOODWEB's Finishing Team decribes how pine differs from hardwoods when it comes to finishing - March 17, 2000

    Building Your Own Bandsaw Mill
    Thoughts on the practicality of building your own bandmill, from those who have done it (or chosen not to). April 11, 2008

    Compensating Salespeople
    Beyond the "salary versus commission" debate: thoughts on how to align your sales force's success with yours. December 2, 2006

    Systematic Takeoffs for Commercial Cabinet Jobs
    Here's some detailed advice on conducting a businesslike takeoff for creating a cabinet bid, with some useful, comprehensive lists. July 13, 2010

    Construire un petit séchoir
    Une longue discussion sur les considérations impliquées dans la construction et l'exploitation d'un petit four dans une cour ou un garage. 8 août 2008

    Dispensing Ingredients
    Finishers contribute tips for storing, measuring, and pouring out paints, stains, and colorants. January 9, 2007

    The True Cost of Overtime
    When you back out overhead, time-and-a-half wages for overtime hours may work out to a wash. But not always ... October 2, 2007

    Shaper Cutter Choices
    A small shop owner who has just purchased his first shaper gets advice on his cutterhead options. December 1, 2005

    Clear Finish for an Exterior Door
    No clear finish lasts long in the sun and weather, but here are some thoughts from finishers on the best of the bunch. December 15, 2005

    Where to Get Free Logs
    Start-up sawmiller gets advice on working with sources of free sawlogs. October 4, 2007

    Kerfing Plywood for Bending with a CNC Router
    A CNC router can kerf out 3/4-inch plywood to make it bendable, but it takes a little tweaking to get there. August 12, 2007

    Sawing Cherry for Quality
    Sawmillers advise on how to get the best quality lumber out of a Cherry saw-log. July 30, 2007

    Staining Cherry to Even Out Color
    Cherry is a tricky wood to stain — it takes stain unevenly and darkens by itself over time. Here's some advice on sanding and toning cherry to achieve a more even finish. December 15, 2005

    Standing Tall Cabinets
    Another take on the problem of maneuvering those too-tall cabinets into their spot. August 14, 2007

    3D Versus 2D Drafting
    The pros and cons of three-dimensional CAD drawing versus working in two dimensions. June 26, 2006

    Budget Alternatives to Teak
    A search for "poor man's Teak" evolves into a discussion of customers, their tastes and motivations. December 30, 2005

    Finishing Guitars with Tung Oil
    Advice for a beginner on applying tung oil to a new guitar. December 31, 2005

    Kitchen Cabinet Clearance Above Stove Top
    Installers discuss the rules for installing cabinets or a microwave and vent hood above a kitchen range. November 19, 2005

    Working Safely with Ipe
    Dust and oils from Ipe wood are allergenic and toxic. You need serious personal protective gear if you work with Ipe. Here's more info. May 16, 2008

    Staining Black Walnut
    A detailed discussion on staining kiln-dried Walnut. November 14, 2009

    Minimum Finish Room Space for a Small Shop
    A startup cabinet shop owner in a small rural market with no commercial finishers asks about a basic finish-room setup for his shop.October 19, 2013

    Powderpost Beetles in Furniture
    Pinholes and powder are a dead giveaway of a beetle infestation. Here are some facts about the bugs and how to handle them. February 19, 2006

    Sealing End Grain in Outdoor Exposures
    Sealing end grain with epoxy is reported to improve outdoor durability of finishes. April 18, 2015

    Comparison Test of Water-Based Finishes
    A cabinetmaker subjects six water-based urethanes to side-by-side stain-resistance testing (and shares his results). July 8, 2005

    Plywood Thickness for Cabinet Cases
    Is 5/8-inch plywood okay? Half-inch, even? Cabinetmakers discuss the pros and cons. December 14, 2005

    Fine Points of Torsion Boxes
    A torsion box is a clever way to create a strong, lightweight, flat surface for shelves or worktables. Here's some info on materials and assembly. September 23, 2006

    Decorative Trim with Stucco
    Alternatives for wall detail trimwork on a stucco house, including coating options, wood choices, and plastic alternatives like cellular PVC. June 23, 2006

    Comparing Lacquers and Conversion Varnish
    Post-catalized lacquers, pre-catalized lacquers, and conversion varnishes — pros compare experiences. July 6, 2005

    Mixing Solid Surface Brands
    If you combine sinks and countertops from different makers, will warranties (and adhesives) hold? April 14, 2005

    Producing Wide, Thick Veneer
    Pros share ideas for making maple and birch veneer at 2-foot width and 1/8-inch thickness. April 14, 2005

    Solvents for Tack-Cloth Cleaning
    Naphtha, denatured alcohol, acetone — what picks up dust best without attacking the finish? July 4, 2005

    Miter-Folding Laminate
    A fabricator seeks advice on making joints fit right and hold tight. April 14, 2005

    Protecting Wood and Coatings from Yellowing
    Here's an extended technical discussion of wood yellowing, finish yellowing, and the finish formula components that may or may not prevent either one. August 21, 2012

    Machining and Gluing Challenges with Ipe
    Here are a few tips and cautions about working with Ipe wood, especially the difficult problem of achieving a lasting glue bond. October 11, 2012

    Ideal Humidity in a Wood Shop
    Indoor humidity levels correspond with wood moisture content. Here's advice on humidity control. October 26, 2012

    Span Capability of an 8x8 Timber
    Here's some realistic and practical feedback on a proposed long-span use of an 8x8 sawn beam. September 27, 2012

    Using a CNC Vacuum for a Glue Press
    You can use a CNC vacuum for laminate and veneer glue-ups or for laminating plywood sheets together. February 15, 2009

    PVC Dust Collection Issues
    Woodworkers discuss pipe diameter compatibility and fire risks with PVC dust collection ducting. October 16, 2012

    Conversion Varnish on Marble Table Tops
    How to make wood finishes stick to stone. August 16, 2012

    How to Veneer a Plywood Cylinder
    Suggested methods for applying veneer to a cylinder. August 17, 2012

    Stickley Design
    A question about Stickley style provokes answers starting with a discussion about rift-sawn and quartersawn oak, and ending with a wide-ranging ramble (or was that rumble?) about Gustav Stickley, the Arts and Crafts movement, history, and the philosophy of work and play. Some pictures of cabinets he ......

    Does Outsourcing Cabinet Parts Make Sense for a Small Shop?
    Cabinetmakers discuss the pros and cons of having parts cut by another shop. January 26, 2008

    Marketing with a Customer Survey
    If it's presented in a thoughtful, personal way, a "How are we doing?" survey can be a very effective marketing device. February 1, 2011

    Chain Saw Tooth Modifications for Ripping
    Detailed, specialized advice on chain selection and tooth grinding and sharpening for chainsaws used to rip logs into rough thicknesses. April 20, 2011

    Attaching Face Frames Revisited
    Cabinetmakers kick around various ways to attach face frames to cabinets. August 15, 2006

    Recognizing Curly Wood
    A practiced eye can spot interesting grain figure in a stump by looking at the bark. October 4, 2007

    Best Dedicated Tool for a Straight Groove
    over and over, until the world gets the message. Router, shaper, or table saw? November 27, 2007

    Humidity Control, Warping, and Case-Hardening
    Maintaining the right drying conditions is a tricky problem, and improper control can lead to defects in the lumber. January 2, 2012

    Bending Laminate with Heat
    Tips on heating and bending laminate material to make radius edges. July 18, 2008

    Hardwood Plywood Grades
    Here's a concise explanation of hardwood plywood grades and what they mean. March 26, 2009

    Beaded Face Frame Basics
    Advice on how to add the "cheese cove" or "quirk bead" detail to beaded face frame cabinets. February 28, 2012

    Shopping for a Forklift
    Thoughts and experiences concerning shop forklifts. January 9, 2006

    Laser Alternatives
    A discussion of laser layout equipment, software, and a low-tech shop-rigged alternative. July 2, 2005

    Limits to Vacuum When Routing Small Parts
    A newcomer asks what size parts he should expect his vacuum table to manage. Experienced hands discuss his problem. July 2, 2005

    Bit Life in High Pressure Laminate
    How many sheets should you be able to cut before a bit wears out? Comparing carbide with diamond, and a discussion of feed rates and settings. July 3, 2005

    Cutting 3/4 Melamine on CNC
    Advice on bit type, feed rate, and RPM. July 3, 2005

    CNC Router Bit Size
    Pros select why to choose a larger or smaller bit. July 3, 2005

    Selling Basswood to Carvers
    Woodcarvers pay good money for Basswood in the right size and condition. February 3, 2011

    Combination Machines in Furniture Shops
    Furnituremakers share experiences with combo equipment. December 6, 2011

    Avoiding Blush in a Clear Lacquer Finish
    To avoid condensation that causes clear lacquer to take on a milky white blush, keep an eye on ambient temperature and humidity. March 12, 2006

    Inset Cabinet Door Clearance
    Three thirty-seconds of an inch ought to be about right... March 6, 2006

    Solar Kiln Designs 4 -- Solar Heated, Lumber Dry Kiln Designs - Part 4
    An in depth article by Gene Wengert and Luiz Carlos Oliveira

    Methods of 32 mm system layout
    Different interpretations on the 32mm system. (Cabinetmaking Forum) March 23, 2003

    Drying lumber - selecting the best method
    Is a solar kiln the best choice for this startup sawmill? December 17, 2003

    Troubleshooting a Cupping Table Top
    Moisture-related wood movement works its bad voodoo again. July 15, 2011

    Controlling Drying Conditions and Monitoring Progress
    Here's a lively, sometimes contentious, and very informative thread about how to ensure quality control when drying lumber in a variety of different kiln types with different control systems and instrumentation. July 16, 2012

    Solar Kiln Designs 1 -- Solar Heated, Lumber Dry Kiln Designs - Part 1
    An in depth article by Gene Wengert and Luiz Carlos Oliveira

    Woodshop Waste Percentage
    How much wood do you waste in the construction of your product? June 21, 2004

    Can You Penalize Employees for Mistakes?
    A discussion of motivation, quality control, accountability, and labor law. September 7, 2013

    "Shading" and "toning" defined
    How different finishers use these terms. February 12, 2003

    Crown Molding Detail -- For Sloped Ceilings
    Calculating angles and inside corner details for crown applied to sloped ceilings. April 2, 2004

    Surviving Tough Times
    A Woodweb forum maker says he's ready to throw in the towel, and others describe why they're not — and explain the tactics they've used to hang tough.October 26, 2013

    American Chestnut Log Identification
    The Woodweb detective team tries to determine if one of the group has found a large American Chestnut log in a firewood pile. March 9, 2010

    Window Part Terminology
    Woodworkers try to bring order to the vocabulary universe and define "muntin," "mullion," "bar," "rail," and related window and door terminology. March 26, 2010

    Shifting to a Lower-Priced Cabinet Market Segment
    A cabinetmaker gets feedback on the idea of targeting smaller and less expensive jobs. November 29, 2014

    Cracks in log home logs -- and other warnings
    Cracks in logs used in log home construction are normal, but not necessarily desirable. August 10, 2000

    Estimating and Pricing for Cabinet Installation
    Cabinetmakers and installers discuss the ins and outs of pricing methods and rules of thumb. September 4, 2005

    Estimating Start-Up Costs
    A brand new business owner seeks input on projecting first-year expenses. January 6, 2005

    Durable Wood for a Screen Door
    A craftsman's question about screen door materials kicks off a long discussion about the qualities of various wood species, old growth and second growth. October 4, 2005

    Shellac and Linseed Oil Finishes
    A long thread on traditional finishes using linseed oil and shellac. May 28, 2010

    Another Wood Identification Conundrum
    Another unknown wood gets a close look from the Woodweb detective crew. Could it be Paulownia? January 18, 2012

    Solving Lifting in Catalyzed Lacquer
    Finishers address the persistent problem, experienced by one of their own, with wrinkling and lifting in catlac. February 8, 2005

    Working On-Site with Hardwood Millwork
    Hardwood details add beauty and value to any installation. November 27, 2001

    Troubleshooting a Moving Table Top
    Another good discussion on a typical learning experience: a table top is restrained on one face from moving in service, and instead the wood cups. December 8, 2012

    Life Expectancy of Bearings in Spindles
    Here is a long discussion of CNC spindle life, cooling methods, and maintenance. February 17, 2012

    Calculating board feet
    The board footage debate rages on--Professor Wengert and others offer up methods of calculation. June 24, 2001

    Troubleshooting Drying Stress
    Some general instruction about the causes of drying stress for the owner of a dehumidifier kiln. April 2, 2013

    Sawmill Truck Show and Tell
    Photos and descriptions of sawmill log and service trucks and loading systems, with the stories behind them. September 5, 2011

    Wrapping a cone with laminate
    How to determine the size, shape, and positioning of cone "skins." April 9, 2003

    Attaching Trim to a Cabinet Top
    Cabinetmakers and finish carpenters discuss how to provide good nailing for large trim pieces at the top of a cabinet. June 11, 2014

    Curved cabinet doors
    What's the most efficient way to build radius frame-and-panel doors in-house? May 15, 2002

    Old Timber Mystery: Creosote, or What?
    The Woodweb detectives discuss old growth Heart Pine, younger Longleaf Pine, the hazard of creosote, and related topics. August 18, 2009

    Joint Design for a Solid Oak Desk
    A conversation about how to create the joint between a solid Oak desktop and its support so as to accommodate wood expansion and contraction. June 17, 2013

    Charging for Design Work
    A shop owner spends many hours designing a proposal, then loses the job. Now he asks: how can I make sure I get paid for my time, next time? September 27, 2012

    Kitchen Remodel Rendering
    Advice on software to create images showing how a new kitchen will look. April 14, 2005

    Training Workers
    The interviewing, hiring, and training process lays crucial groundwork that sets the tone for sound employee management. 1998.

    FOB defined
    Origins and meanings of the term "freight on board." (Sawing and Drying Forum) March 23, 2003

    Stile and Rail Sizes for Doors and Drawer Faces
    A thoughtful discussion on whether and how to vary the stile and rail proportions when designing and detailing cabinets with larger doors and smaller drawer faces. July 13, 2010

    Establishing a shop rate
    When adding an employee to your business, how do you adjust the shop rate? June 24, 2001

    Learning Opportunities for a Disabled Veteran in Furniture-Making
    There are programs available that can help a veteran make use of his educational and disability benefits. March 20, 2007

    Contaminants in High-Gloss Finish
    Is dust causing the flaws in this otherwise mirror-shine finish? August 26, 2004

    Staining Pine Cabinets
    A finisher gets advice on how to get even results in just a few steps. August 30, 2005

    Glaze technique problem
    Trying to match a unique mystery finish sample. April 9, 2003

    Managing On-Site Work
    Knowing how to handle yourself and your employees on a job site is critical to winning future referrals. 1998.

    TOC and Complexity
    Is the "Theory of Constraints" of limited practicality because it focuses on simple, linear event chains with the assumption that there is only one limiting constraint? Woodweb goes fractal on the shop floor. November 15, 2010

    Measuring Logs and Lumber
    Lumber measurement - Professor Gene Wengert clears up questions regarding proper measurement techniques. May 28, 2001

    All About Authority -- Where Have All the Leaders Gone?
    Unless owners grant their managers the freedom to act, those managers will never rise to the stature of 'leader.' 1998.

    Causes and cures for sticker stain
    The Wood Doctor weighs in with comprehensive information about the causes and prevention of sticker stain. 1998.

    Direct Mail: An Effective Marketing Tool -- for Custom Woodworkers
    Small- to mid-sized shops can use this mode of marketing to their advantage. 1998.

    Troubleshooting a Bad Smell in Drawers
    Dead bacteria in plywood can cause a rancid odor, and a badly catalyzed finish may also produce offensive smells. March 9, 2010

    Attaching Cabinets to Steel Studs
    Cabinet installers share tips and tricks for hanging cabs in commercial buildings where the framing is steel instead of wood. January 26, 2008

    Shellac as a Sealer under Lacquer
    Pros discuss the fine points of applying a sealer coat of shellac when refinishing furniture. July 11, 2005

    What to Do When You Forget the Catalyst
    Is there any quick fix when you suddenly realize that you're spraying conversion varnish but you forgot to mix in the catalyst? Yes, but ... February 2, 2011

    Messy mixing
    How to mix lacquer and reducer without suffering serious splashes and spills. May 9, 2001

    Finishing Prices
    Calculating pricing for finishing services

    Durable Wood for Porch Decking
    What natural wood species might be suitable for a covered porch floor? June 26, 2009

    Replacing Insert Cutters on a Holz-Her Edgebander
    The Woodweb community steps up with detailed instructions and drawings for an edgebander owner who has gotten himself in too deep with a maintenance issue.July 5, 2011

    Methods and Materials for an Outdoor Curved Stair
    A woodworker gets advice about replacing a beautiful and well-made outdoor curved stair. April 22, 2014

    Automatic vents for solar kiln
    Can vents be left open at night or must they be controlled? (Sawing and Drying Forum) April 29, 2003

    Contracts and Collections
    Owning a woodworking business is great, provided you remember it is a business. How to contract carefully, and get paid. 1998.

    A Selling System, part two
    Part two of five, from Custom Woodworking Business magazine, on developing a customer base through a carefully planned and executed sales approach. 1998.

    Assertiveness Training for Woodworkers
    One in a series, looking at the relationships between woodworking companies and the businesses they deal with. 1998.

    The Great Fisheye Hunt
    Three tales of finish fisheyes found and fixed, with ideas on preventing them. 1998.

    Marketing Your Business
    Assessing the value of various types of advertising and marketing tools. 1998.

    A Selling System, part four
    Part four of five, from Custom Woodworking Business magazine, on developing a customer base through a carefully planned and executed sales approach. 1998.

    Tablesaw blade guards
    Choosing the best blade guard/dust collector. April 9, 2003

    Turning to the 'Pros'
    One in a series, looking at the relationships between woodworking companies and the businesses they deal with. 1998.

    Can You Relate? -- Legal and Accounting
    A closer look at the accounting and legal professions, and their value to woodworking businesses. 1998.

    Limbing practices
    To prune or not to prune your future sawlogs. (Forestry Forum) March 23, 2003

    New Year's Resolutions -- Or: Leaving a Paper Trail
    You can learn a lot from the paperwork a job generates, especially if you're careful to generate plenty of it. 1998.

    Refinishing Outdoor Mahogany Furniture
    Detailed advice on stripping automotive finish from Mahogany furniture and restoring the piece with something more suitable. July 23, 2014

    Using Water-Based Contact Cements
    When you switch from solvent-based to water-based contact cement, there are a few new things to learn. Pros share application tips in this thread from the Woodweb Adhesives Forum. July 2, 2005

    Speedy Face Frame Construction
    Cabinetmakers debate the details of fast methods for building and attaching face frames. July 9, 2005

    Free Span Limits of Cabinet Shelving
    For wide cabinets with double doors and no center stile, how far is too far for the shelves to span? Here are suggestions for stiffening wide span shelving. March 27, 2012

    Wood Handbook -- Wood as an Engineering Material
    Information on engineering with wood, properties of wood and designing with wood. September 28, 2002

    A Selling System, part five
    Part five of five, from Custom Woodworking Business magazine, on developing a customer base through a carefully planned and executed sales approach. 1998.

    Fortune Teller: Making More Money in the Wood Industry
    Wood Doctor Gene Wengert makes some educated guesses about the near future in the wood products industry, and offers some advice about how wood-based businesses can profit from change. April 15, 2013

    Should I Advertise?
    The whys and wherefores of marketing for owners of woodworking businesses. 1998

    A Selling System, part one
    Part one of five, from Custom Woodworking Business magazine, on developing a customer base through a carefully planned and executed sales approach. 1998.

    A Selling System, part three
    Part three of five, from Custom Woodworking Business magazine, on developing a customer base through a carefully planned and executed sales approach. 1998.

    Sawing and Drying Sweet Gum
    Sweet Gum is a troublesome wood to work with because of its tendency to twist and move, but the effort can be worth it for some uses. February 14, 2010

    Stair to Base Transition Example
    Follow a trim carpenter from idea to execution as he figures out a tricky baseboard trim transition at the bottom of a staircase. April 21, 2011

    1998-Rewarding your People
    Creating a productive, inclusive shop atmosphere, and rewarding employee initiative. 1998

    AutoCAD Dimension Lines
    Cleaning up extension lines. December 26, 2004

    Repairing Bubbles in a Laminate Countertop
    You can fix a contact-cement adhesion problem with a hot iron. Also, here is some advice on contact cement application equipment. August 15, 2011

    Refrigerator Fit Issues
    "Counter-depth" refrigerators don't provide a true built-in look: the sides are exposed, as this cabinetmaker learned to his (and his customer's) dismay. November 2, 2010

    Clamp Cart
    Shop-made carriers for clamps. December 26, 2004

    Marketing Strategies -- to Help You Move Beyond Referrals
    Referrals are fine, but don't ignore other ways of finding business. 1998.

    What Makes a Contract a Contract?
    A cabinet-maker's builder customer has bailed out on a design-build job after paying a deposit and okaying plans. Now who owes what to who? This thread from Woodweb's Business forum provides a good clarification of just what kind of statements and actions add up to a legal contract. November 11, 200 ......

    Contracts versus cost-plus
    Some jobs are impossible to estimate. But don't walk away until you've proposed working on a 'cost-plus' basis. 1998.

    Taking it to the Bank
    One in a series, looking at the relationships between woodworking companies and the businesses they deal with. 1998.

    The Other Side of Estimating
    How good cost accounting keeps your pricing structure 'honest.' 1998.

    Moisture Meter Accuracy
    Moisture meters aren't perfectly accurate, and wood moisture content can also vary within a piece. October 25, 2006

    Log and Board Handling Equipment
    Sawmillers discuss the equipment they use to move logs and lumber around the mill. July 15, 2012

    Fastening countertops
    How to fasten a laminated particleboard countertop to cabinets. March 28, 2001

    Quality Control for Picture Frames
    The fine art of woodworking: a discussion of wood choices, moisture control, and other key issues involved in creating picture frames that will be stable in service.June 12, 2014

    Guess the Wood
    Another wood identification mystery leaves the Woodweb forum guessing. What species is this highly figured, iridescent, almost glowing orange/yellow burl in a unique table. April 20, 2011

    Life as a Cabinetmaker
    "Would you do it all over again?" asks a cabinet shop owner after five years of struggling with business realities. Heartfelt responses prove that building cabinets is no easy way to make a buck. February 21, 2006

    Installing an Interlocking Door Threshold
    Using tail wags, ear movements, growls, and barks, an old dog describes in detail the installation process for a Pemko interlocking residential door threshold. October 19, 2014

    Roughsawn Hemlock for Framing Lumber
    Thoughts and advice on sawing up hemlock to use for house framing. October 20, 2005

    Ten Tips for Fine Finishing
    Follow these ten pointers and watch the quality of your finishing improve. 1998.

    Torsion Box Details
    A conversation about ideas for a torsion-box flat work surface for the shop. August 31, 2010

    Stain Spots on Soft Maple after Kiln Drying
    This particular problem was a chemical stain, but the thread also has an interesting discussion of beetle damage. June 13, 2014

    Marketing to Professional Designers
    Can a furnituremaker succeed by selling primarily (or even only) through professional designers and architects? The question sparks a thoughtful discussion in Woodweb's Business Forum. July 2, 2005

    Repairing Damaged Veneer
    Pros troubleshoot a water-damaged veneer table top, and consider possible fixes. October 30, 2005

    Wood getting stuck in planer
    Some possible causes and solutions to the problem of wet wood getting stuck in a planer. June 14, 2000

    Suitable Substrates for Laminate
    A discussion of which countertop materials are compatible with laminate, and why. July 13, 2010

    Necessary Equipment for a Start-Up Cabinet Shop
    Most respondents did not take the original poster seriously in this thread. But a few cabinetmakers did provide a list of basic equipment for a start-up shop.June 16, 2014

    Tension Set and Lumber Conditioning
    Advice on remediating curved lumber after resawing, with a discussion of why "tension set" occurs and how the effect can be reversed. October 19, 2013

    Storage Cabinet Shelf Spacing
    Ideas about the value of adjustable shelving, and about practical shelf spacing in kitchen cabinets. December 8, 2010

    The 'PDQ Rule' for Custom Work
    Follow this simple rule to assure your custom manufacturing business's profitability. 1998.

    Running Two Compressors Together
    Further advice on tag-teaming compressors (it does get a little tricky). March 9, 2008

    Installing Separate Toekicks
    Methods of attaching separate kicks. January 6, 2005

    Dehumidification drying of thin stock
    Simple drying methods for small, thin stock. (Sawing and Drying Forum) March 23, 2003

    Face Frame Efficiency
    Avoiding bottlenecks in face frame construction. September 20, 2004

    A glossary of finishing terms
    Finishing-specific slang and jargon, defined. 1998.

    Whether to Share Your Knowledge Locally
    Woodworkers discuss whether the type of knowledge they willingly exchange on a forum should be shared with local acquaintances. September 27, 2012

    TV cabinets
    Designs for large, small and flat screens. April 9, 2003

    Conversion Varnish Turning Wood Panels Pink
    Investigation reveals that the catalyst in the varnish reacts with the wood to create a pinkish hue. Solution? Start by applying some kind of barrier coat. June 28, 2013

    Wood dust hazards and safety gear
    A detailed look at personal safety precautions for those exposed to wood dust.

    Span Limits for Plywood Shelving
    Over three feet, and you're looking at potential sagging issues. Pros discuss span limits and shelf stiffening options. November 11, 2005

    Finishing Outdoor Teak
    No outdoor finish is permanent, but here are some reasonably durable options. August 30, 2005

    Matching Finish on Cherry
    Cherry darkens over time from exposure to light. Matching older pieces is tricky. February 12, 2010

    Touching Up a Cross-Grain Scratch in Mahogany Veneer
    For deep scratches in veneer, your best bet is to start over. But in a pinch, here are some tips and techniques for hiding the mistake (sort of). May 17, 2005

    Moisture Testing Variability
    A discussion of factors that could account for a discrepancy between a supplier's wood moisture content readings and the customer's. October 12, 2008

    Is Joining the Cabinetmakers Association Worthwhile?
    Some members say that active participation in the CMA has boosted their businesses. May 31, 2014

    Wood Choices for Barn Siding
    What kind of trees make good board siding for a barn? April 24, 2014

    Finding -- and Fine Tuning - your Niche
    How to find the type of work you can do best, and most profitably. 1998.

    Jarah
    and we do mean HARD. 1998.

    LLC vs. S-corp
    The pros and cons of these two business classifications. June 6, 2001

    Upcut, Downcut Or Compression Tools
    Which is better? It depends on the use (and your technique). April 10, 2005

    Slab Table Leg Joinery
    Advice on table leg joinery that will tolerate movement in the slab table top. January 24, 2010

    Sound Control and Airflow for Louvered Doors
    Considerations relating to sound transmission and air flow through louvers on the doors of an equipment room. April 4, 2011

    Troubleshooting Edgebander Cutting Issues
    Keeping the knife well sharpened and lubricated helps. So does keeping the air lines and filters clear. September 16, 2013

    Furniture for High Humidity Conditions
    Advice on controlling moisture content during construction for furniture destined for a relatively uncontrolled environment. November 15, 2010

    Uses for Mulberry Wood
    Mulberry is nice for turnings, knick-knacks, and furniture. April 18, 2009

    Calculating Radians/Chords
    Formulas to help do the figuring. February 28, 2004

    Solar kiln materials
    Advice on types of materials for letting light into your solar kiln. June 24, 2001

    Using Beech to Build Cabinets
    It's a beautiful wood, but is American Beech too unstable for cabinets? Not necessarily, say those who've tried it. August 21, 2006

    Selling small quantity custom profiles
    Dealing with customers who don't comprehend the work and cost involved in the manufacture of custom knives. June 6, 2001

    Feed Rate and Cut Depth for Melamine on the CNC Router
    A discussion of CNC settings that work well for machining cabinet parts from 3/4-inch melamine. June 23, 2014

    Stripping Veneer
    How to get old finish off a veneered desktop without damaging or lifting the veneer. April 30, 2009

    Lift Truck for a Small Shop
    Contractors discuss ways to get heavy materials up to and down from an upper-floor loft in the shop. July 11, 2013

    Torsion Box Shelf Ideas
    Concepts and examples for strong lightweight torsion-box book shelves. February 25, 2009

    Applying Parchment as a Laminate
    Advice on adhesives, substrates, and sealers for parchment applied to a table top. April 29, 2010

    Troubleshooting A Drilling Inconsistency
    Professionals diagnose a case of inaccurate drilling. April 10, 2005

    Moulder Feed Problems 1: Caused by Machine
    A problem-solution checklist chart for correcting moulder feed problems. November 27, 2006

    Loss in air-dried lumber
    The Wood Doctor provides typicial loss factors for several speices of lumber, when air-dried. 1998.

    Drying wood for musical instruments
    A primer on various lumber drying techniques as they relate to musical instrument construction. 1998.

    Shellac for Exterior Priming
    Shellac isn't recommended for outdoor use. But some people report that they've gotten away with it. June 18, 2009

    Surface Mold on Framing Lumber
    If the wood will be dry in service, mold on the surface is strictly a cosmetic concern. Here's more info on washing and drying for the sake of appearances. April 20, 2011

    Standards for Shop Priming
    What are reasonable specs when you pre-prime cabinets for a builder? May 17, 2005

    Characteristics of padauk
    Basic characteristics of this beautiful, brilliant-red wood. October 10, 2000

    Applying Glue or Water to Dowel Holes
    Focusing in on a small step with dowel construction: preparing the dowel hole. August 21, 2012

    Conditioning Lumber to Relieve Drying Stress
    Tips on steaming lumber at the end of the drying cycle to reduce stress. May 15, 2012

    Laying out a new shop
    Advice on dust collection, electric, and general layout from those who have built their own shops. March 16, 2001

    Card Scraper Advice
    Card scrapers are an effective tool for preparing a wood surface for finish. The tricky part is sharpening. March 26, 2013

    Wood species for outdoor furniture
    The Wood Doctor names names: Decay-resistance lumber suitable for outdoor use. October 10, 2000

    Keeping the Gun Clean with Waterborne Finishes
    Easy routines to keep your spraygun from accumulating dried-on finish at the tip. December 23, 2014

    Troubleshooting "Hiccups" with an Air-Assisted Airless Gun
    Woodweb comes to the rescue again, diagnosing a finisher's spraygun malfunction and saving him a bundle of cash. April 10, 2008

    Troubleshooting Adhesion Failure of Lacquer to Caulk
    Lacquer may not stick to caulk properly, depending on the products and the technique. September 3, 2010

    Mitering Radius Moulding to Straight Moulding
    Here's help visualizing and laying out the miter cuts where a curved piece of moulding meets a straight piece with the same profile. April 24, 2014

    Color-Matching Basics
    Tips on mixing pigments for matching existing tints. June 10, 2006

    Accounting for Referral Fees
    Advice on how to figure "thank you" payments for referrals, and how to enter them into your bookkeeping system. March 25, 2008

    Shaper cutters: Tantung or carbide?
    Choosing between carbide tipped and tantung shaper cutters. July 3, 2001

    MDF or Solid Wood for a Face Frame
    MDF is nice for paint-grade door panels, but not so suitable for face frames. October 15, 2009

    Grain standards for radius mouldings
    Standards methods for joinery of radius mouldings, with exposure of end-grain in mind. June 6, 2001

    Log Weight and Log-Moving Equipment
    Practical advice on guessing the weight of logs, and tips on equipment choices for log handling. July 28, 2006

    Attaching Finished Panels to a Bar Cabinet Back
    Advice on hiding the fasteners when you attach panels to a cabinet. July 29, 2012

    Working with hickory
    How to get around the difficult machining characteristics of hickory. July 24, 2001

    FSV adhesive
    How this new glue is used. April 9, 2003

    Drying Schedule for Red Oak
    Advice for a kiln operator on drying rates and humidity and heat settings for drying Red Oak in a dehumidifier kiln. October 3, 2009

    Shop-Made Frame Assembly Table
    Details on construction, including images. March 14, 2004

    Grinding custom shaper knives
    Does it make sense to grind your own shaper knives? June 6, 2001

    Sealing Cut MDF Edges
    Three different approaches to sealing the cut edges of MDF panels, so finish coatings won't soak in. April 19, 2011

    Comparing wood strengths
    Wood species has less to do with strength than does grain characteristics. June 21, 2000

    Removing Old Laminate and Contact Cement
    Heat, solvent, and scraping do the trick. August 23, 2005

    Honeycomb and Checking with Mixed Kiln Loads
    Advice on limiting honeycomb defects in Red Oak during kiln-drying operations. September 6, 2010

    Killing Red with Green Tint
    Green dye can neutralize red in wood or an existing finish, but proceed carefully to avoid over-correcting.March 28, 2015

    Warping and cracking in glued-up pine
    To find clues for cracked and warped pine panels, a measure of moisture content is needed before the splitting occurs. 1998.

    Substitutes for Mahogany
    Either lyptus wood or luan (also called "meranti") may be an acceptable lower-cost alternative to mahogany in cabinets. March 12, 2006

    Voltage and Amperage for a Postform Heater
    A close look at the plug gives clues to the voltage and amperage of the device. February 1, 2015

    Is Cedar an Insect Repellent?
    Including Cedar in a stack of sawn wood will not keep bugs away, the Wood Doctor explains. July 11, 2013

    Inset Routing with a Shaper
    Advice on how to rout a cavity into the middle portion a long piece of solid wood. July 29, 2011

    Mixing Borate to Control Post Beetles
    Advice on obtaining and mixing borate pest-control formulas. January 8, 2010

    Animal and hide glues
    Animal-based glues have all but disappeared in most woodworking applications. 1998.

    Circular Sawmill Blade Tuning
    Large circular sawmill blades are hammered to dish the blade when at rest; it flattens out when the mill is running. Here's more. April 30, 2009

    Tooth setter
    Photos and descriptions of home-built tooth setters for band blades. March 5, 2003

    Ridding one's house of powderpost beetles
    What to do upon discovering an infestatoin of powderpost beetles. 1998.

    Force Drying Pecan Slabs
    Don't try high heat on Pecan — it can split badly even when slowly air-dried. February 3, 2011

    Mist systems and relative humidity
    Mist systems, what they do, and some general information about relative humidty and its effect on wood. 1998.

    Tinting Linseed Oil
    Oil based colorants, or just oil paint, are easy to add to linseed oil for color. October 15, 2009

    Warpage in bookmatched curly maple?
    Warpage should not be anticipated in bookmatched lumber any more than in any other type of glue up. 1998.

    Usefulness of Gum Wood
    Which variety is this, and what's it good for? February 26, 2005

    Off-Brand Asian Planers
    Interesting info about those Chinese-made shop machines you sometimes see bearing unfamiliar name plates.November 14, 2014

    Woods that Match Well with Natural Pine
    Thoughts on wood species that pair well visually with Pine. October 1, 2010

    Moulder Feed Problems 2: Caused by Material
    A problem-solution checklist chart for correcting moulder feed problems. November 27, 2006

    Is Eastern red cedar toxic?
    Eastern red cedar does not share some of the reaction-generating characteristics of its Western namesake. 1998.

    Comparing Western and Eastern cedars
    Both Eastern white and Western red cedars have their virtues; the Wood Doctor provides details. 1998.

    Cupping of resawn lumber
    The two reasons wood cups when resawn. 1998.

    Do tropical trees lose their leaves?
    The Wood Doctor explains that many species of tropical trees are indeed deciduous. 1998.

    Are water-based finishes worth it?
    An industry expert recounts users' experiences with, and motivations for, converting to water-based finishing products. 1998.

    Cypress board and batten siding
    It's better to kiln dry that cypress before siding your house with it than to let air-drying suffice. 1998.

    Kiln drying Mexican oak
    Mexican oak can be dried using the same schedules as those used by processors in the United States. 1998.

    Temperature maximums for dehumidification units
    and that's plenty. 1998.

    In search of flat doors
    Even slightly inaccurate machining can produce frame-and-panel doors which are less than flat. June 6, 2001

    Spots revealed in dry, planed lumber
    Dr. Gene attempts to find the causes of discolored spots on dried lumber, revealed only when the stock has been planed. 1998.

    Techniques for drying wooden bowls
    Advice on how to dry large, turned vessels. 1998.

    Valuing and pricing old lumber
    Lumber pricing is like everything else: Whatever the market will bear.

    Angle for Coping Crown Molding
    Looking for the magic number. December 26, 2004

    Kiln dried: Better than air dried?
    Why kiln-dried lumber is the best option for wood that will eventually 'live' indoors. 1998.

    Topcoat adhesion over pigment stain
    A coat of dye stain under a heavily pigmented stain can help assure good topcoat adhesion. 1998.

    Sealing architectural doors properly
    Why linseed oil does not meet manufacturer's warranty requirements for sealing architectural doors. 1998.

    Steaming of Walnut
    Properly done, steaming adds an even dark tint to walnut. But the wrong technique gives unsatisfactory results. October 4, 2007

    Raised glue lines after curing
    A glue line that is raised days after parts are assembled and the glue has cured is a sure sign of wet lumber. 1998.

    Touching up waterborne finishes
    Things to consider when repairing waterborne topcoats. 1998.

    Drying green tongue-and-groove pine
    Success in drying green, already-machined lumber has much to do with the species. 1998.

    Cleaning and Storing Sprayguns and Lines after Spraying Waterborne Finishes
    Advice on cleaning and storing spray equipment. September 26, 2013

    Moulder Feed Problems 3: Caused by Tooling
    A problem-solution checklist chart for correcting moulder feed problems. November 27, 2006

    Moisture content of walnut -- and measuring it
    A woodworker seeks information about acceptable moisture contents for walnut used in furniture, and wonders what makes moisture meters tick. 1998.

    Wood waste for electric generation?
    Could wood be an efficient source for eventual conversion into electric power? 1998.

    Gluing veneers
    Some tips for gluing down veneer. 1998.

    Raised grain: A pith-side phenomenon
    Raised grain tends to appear more on the side of boards which, in the log, faced the pith. Here's why. 1998.

    Woods for outdoor furniture
    A manufacturer of outdoor furniture consults the Wood Doctor for help with choosing a species to replace beech. 1998.

    Measuring surface roughness
    Three methods for measuring surface roughness on dressed lumber. 1998.

    Identifying Old Pine Planks
    The Woodweb crew checks out some photos of what is probably Southern Yellow Pine, and possibly Longleaf Pine. September 6, 2010

    Gluing white oak panels
    Because of its density, white oak lumber must be machined carefully for panel glue-up, and assembled within an hour of preparation. 1998.

    Air-dried oak for casework?
    Air-dried lumber needs to live in the environment it will inhabit prior to fabrication. 1998.

    Repairing a sequenced MDF door
    reverse the terminal warp of a sequenced MDF/cherry door. 1998.

    Cambium miner's effect on lumber grade
    Gene Wengert on cambium miners, what they do, and whether the result affects lumber grade. 1998.

    Calculating longitudinal shrinkage
    There's no firm factor for calculating longitudinal shrinkage in maple, but here's a place to begin. 1998.

    Working with casehardened lumber
    Casehardened lumber should be returned to the processor, or planed to the desired thickness; resawing is not an option. 1998.

    Electrostatic finishing of wood products
    An overview of the uses of electrostatic spray technology in the wood industry. 1998.

    Lumber drying options and efficiencies
    The Wood Doctor's favorite references for making decisions among lumber-drying options. 1998.

    Laminating different species
    In a triple lamination, it's OK to use two species of lumber, given a few conditions. 1998.

    More on blue stain removal
    Is there a 100-percent-effective method for removing blue stain from pine? 1998.

    Kiln-drying energy: Too cheap to save?
    Sleep lost over the most efficient way to insulate a wood kiln will yield only lost sleep, not big savings. 1998.

    Air drying of hardwoods
    Basic information, and where to find more of it, on air-drying green lumber. 1998.

    Treating wood worm infestations
    How to arrest an infestation of wood worms before they migrate to other furniture. 1998.

    When holly goes pathological
    Only fungus and injury cause color change in normally white holly. 1998.

    Drying pine for a trestle table
    A brief look at the basics of drying freshly milled, 3-inch-thick pine. 1998.

    Rotted siding
    Gene Wengert helps a homeowner with a question about decaying siding. 1998.

    Creating skateboard blanks -- with compound curves
    Ideas for gluing up 'longboard' blanks for skateboards. 1998.

    Workbench end caps: Bad idea?
    Though European workbenches commonly feature caps over the ends of the worktop material, these may hinder natural movement of the wood on this side of the Atlantic.

    Wood dust a carcinogen?
    The Wood Doctor points to two sources of information on the carcinogenic properties of wood dust. 1998.

    Shrinkage allowances for red oak
    Estimating radial and tangential shrinkage when drying red oak to 12 to 14 percent MC. 1998.

    Converting board feet to metric
    It's not as simple as it sounds. November 7, 2001

    The importance of balanced finishes
    or in this case, do unto one side of your project what you did to the other. 1998.

    Machining MDF
    Tips for machining MDF. 1998.

    Chemically "aging" cherry
    Tips and cautions for using chemicals to quickly achieve the richer colors certain woods attain with age. 1998.

    Relative densities of various birches
    The Wood Doctor offers resources for information on the relative densities of birch lumbers, and offers an opinion on plastic laminate. 1998.

    Ideal relative humidity in woodworking plants
    Determining the best relative humidity level for your operation. 1998.

    Drying small pieces in microwave
    You can dry lumber in a microwave oven, under certain conditions. 1998.

    Tips for drying butternut burls
    Butternut burls are dried much like regular lumber. Also, a source for further information on drying burls. 1998.

    Laying Out Ellipses
    Spreadsheets, formulas, jigs, or approximation - quick links to all methods. April 11, 2005

    Darkening wood with steam
    Saturated steam can be an effective way to darken some species of wood, while still green. 1998.

    Embossing wood blocks
    Producing embossed ABC blocks is expensive, unless you're doing a bunch of them. 1998.

    Smelly lauan
    The Wood Doctor is quizzed about bad-smelling lauan in a commercial bar. Diagnosis: anaerobic bacteria. Prognosis: terminal. Prescription: replacement. 1998.

    Converting to conversion varnish
    Basic information on conversion varnish topcoats. 1998.

    Ash baseball bats
    Where to find the strongest ash for baseball bats. 1998.

    Wood technology Web sites
    A short list of Web sites with information about characteristics of given species. 1998.

    Salvaging lumber from submerged wood
    The best chance for salvaging lumber from submerged wood lies in cutting it quickly, and drying it slowly. 1998.

    Why is machined teak blotchy?
    If you're not familiar with it, one property of freshly machined teak can take you by surprise. 1998.

    Stained oak from supplier
    There are solutions for stained, milled, not-yet-dried oak lumber, but first , one must determine the cause of the staining. 1998.

    MC in imported mahogany furniture
    Moisture contents higher than eight percent are suspect, and suppliers must be notified. 1998.

    Underwater wood: Worthless?
    Generally speaking, submerged lumber is often a total loss. 1998.

    Solar Drying Basics (PDF)
    Illustrated article from the West Virginia University Extension Serivce on solar drying and kilns, in PDF format. June 19, 2003

    Second-growth cypress -- it's just not the same
    Second-growth cypress lacks the natural decay resistance of its first-generation counterpart. 1998.

    UV-inhibitive topcoats
    1998.

    Use and finishing tips: Cottonwood
    Cottonwood is a good quality, light-to-medium duty wood. 1998.

    Clickable Tree Species Map
    Locate tree species by hardiness zone, state or province. December 18, 2002

    Characteristics of butt log lumber
    Denser, darker wood than the rest of that from the same laod may be from butt logs. 1998.

    "Sandy" glue joints
    The age of glue matters. 1998.

    Identifying bird's eye maple
    What causes the unique patterns in bird's eye maple lumber? 1998.

    Food-safe glues
    Adhesives used for bowls, cutting boards and utensils. June 6, 2001

    Wood density studies
    Sources for reports on several studies of wood densities are provided. 1998.

    Drying Hardwood Lumber
    A publication from the Forest Products Laboratory. August 22, 2003

    Drying hard maple for whiteness
    Permissible extremes for dehumification drying of maple, to accentuate whiteness. 1998.

    Drying South American hardwoods
    Dr. Gene Wengert provides a resource for information on drying tropical hardwoods. 1998.

    Tinting lacquers
    Universal colorants are usually safe for tinting lacquers. 1998.

    Australian lace wood
    Characteristics of this unusual wood. 1998.

    Using CNC Vacuum as a Glue Press
    You can use a CNC vacuum table and plastic sheeting for an improvised "vacuum bag" for laminating panel goods together. Who knew? January 9, 2008

    Discoloration in steamed beech
    Tracing the source of discoloration as a result of beech steaming. 1998.

    Table Legs
    11/26/2012

    Tips for machining pecan
    The Wood Doctor offers three things to bear in mind when machining pecan. 1998.

    Worms in ash
    Are worm holes in just-bought ash a cause for concern? 1998.

    Yellow glue: O.K. for laminating?
    If specs are met, yellow glue is fine for bent laminations. 1998.

    Lilmited options for blue stain removal
    Blue stains in pine can only be removed through planing or heavy bleaching. 1998.

    Flame spread rating for oak
    Oak is rated at 100 by the ASTM. 1998.

    Design of air drying sheds
    General info on the design of sheds used for air-drying lumber. 1998.

    Dark liquid from walnut: Toxic?
    The Wood Doctor says: Stay away from this stuff! 1998.

    Drawing and Cutting Ellipses
    Drawing ellipses without strings or formulas, making a jig to cut an ellipse, and cutting an ellipse with a router and jig. January 28, 2007

    DH kiln operation
    A resource for DH kiln operation. 1998.

    Kiln-drying eucalyptus
    Recommended temperatures for drying this native Australian species. 1998.

    Tannic acid stains in oak
    October 16, 2000

    How much pressure?
    A few gluing tips as well as a demonstration of the pressure that Clam Clamps exert on miters. January 28, 2007

    Coping Crown Moulding
    Coping crown moulding, and recognizing un-copable crown moulding. January 28, 2007

    Equipment For New Cabinet Business
    Equipment and other advice for a beginning businessman. August 26, 2004

    Polyester finishing techniques
    Achieving the perfect, better-than-piano finish with pariffinated polyester. May 9, 2001

    Building Your Own Spray Booth
    Pros discuss ways to ventilate and filter. March 17, 2005

    Frameless carcass construction
    A detailed discussion of the quality of frameless cabinets. July 24, 2001

    Cabinet Software and Drafting Software
    A young shop owner wonders how to step up from a cabinet software package to a full-fledged drafting program, mostly in order to be able to modify architects' drawings. A long, informative discussion ensues about the relationship between drafting programs and cabinetmaking CNC software, and the rela ......

    Confirmat screw assembly
    Troubleshooting problems with Confirmat screws. June 24, 2002

    Choosing an HVLP System
    Selecting the proper size and quality system for your shop. October 21, 2004

    Machining raised panels
    Addressing workpiece movement and tear-out problems. April 9, 2003

    Finding Good Help
    12/23/2015

    Designing entertainment centers
    Important considerations when designing and building multimedia centers. August 25, 2003

    Antique Machinery and Stair Rail Fabrication
    The old machinery is cool, but it can't compete with modern CNC equipment for productivity (or safety). October 19, 2013

    Building a rotary phase converter
    How to build a rotary phase converter. November 29, 2000

    Low-tech panel squaring
    Methods and machines for squaring that don't involve CNC equipment. April 9, 2003

    A Disappointing Auction
    Cautionary tales about equipment auction disappointments, from both the seller's and the buyer's sides. April 10, 2012

    Mulligan Stew: Random Observations -- and Ideas on Management
    A bunch of different stuff that owners and managers of woodworking business should think about. 1998.

    Specialty Planer Heads
    Pros discuss the options and their preferences. April 10, 2005

    Getting Started
    Three basic tips for getting a new woodworking business off to a healthy start. 1998.

    Fabricating Pyramid-Shaped Raised Panels
    Advice and thoughts on how to machine a raised door panel that looks like a very low pitched hip roof. November 5, 2013

    Sizing Up SketchUp
    Cabinetmakers discuss what Google SketchUp can and can't do. June 4, 2012

    Think before you take the CNC plunge
    WOODWEB technical advisor Brian Personett offers some food for thought to those thinking about purchasing CNC equipment. November 15, 2000

    Buying a Used Straight Line Rip Saw
    Maintenance, wear and tear, and other factors to consider when purchasing a second-hand straight line rip saw. November 14, 2014

    PVA glues for veneering -- pros and cons
    PVA glues can work for veneering, but there are potential pitfalls. 1998.

    Treated pine vs. cedar
    The Wood Doctor offers his prognosis for outdoor projects using cedar and treated pine. 1998.

    Sharpening a circular sawmill blade
    Hand sharpeners vs. automatic sharpeners--their pros and cons. July 3, 2001

    Speedier cutting of toe-kick notches
    Techniques for quickening this necessary element of cabinet part machining. July 18, 2000

    Filling holes in pre-finished moulding
    What to use for filling nail holes after pre-finished trim in installed. June 6, 2001

    A PEG primer
    Some general information on this green-wood treatment. 1998.

    : Redheart, described and defined
    "Redheart" is just another name for... 1998.

    UV-cured finishes
    A look at UV-cured finishes over water-based stains. 1998.

    Heat resistant veneer glue
    There are glues that will withstand the high temperatures in heat-assisted finishing operations. 1998.

    Bleaching wood
    Choosing the correct bleaching agent makes all the difference when altering the natural color of wood to achieve uniformity. 1998.

    Filling nail holes in stained finishes
    For a good color match, mix putty with stain before filling nail holes. 1998.

    Steaming beech and why not
    The Wood Doctor cautions against steaming beach for extended periods. 1998.

    Cargo Trailer or Box Truck?
    Cabinetmakers discuss the cost, benefits, and practicality of buying a trailer or box truck for hauling cabinets, materials, and equipment. November 20, 2005

    Zero Clearance Table Saw Inserts
    Buy 'em, or make your own? June 28, 2005

    Sawing and Drying Less Common Species
    Sawyers give the Wood Doctor some feedback about lesser-used species such as Persimmon, Madrone, Boxelder, and Mulberry.September 5, 2011

    Anti-Kickback Table-Saw Fence Jig
    For angled rips, a top-fence jig safely holds off-cuts down. June 17, 2005

    Diamond Versus Carbide Bit Life
    More opinions on how long a cutter bit should last. July 4, 2005

    Square Corners for a Let-In Door Panel Rout
    Ideas for squaring a door-back rabbet with less chiseling labor. June 18, 2005

    Level Cabinets in Out-of-Whack Houses
    A rowdy, no-holds-barred debate on whether cabinet installers should fudge square and level when the existing house is neither. December 20, 2005

    Dealing with Bowed or Warped Plywood
    Warped, bowed, cupped, twisted — these days, plywood seem to lie every which way but flat. Here's a long and somewhat technical discussion of what makes plywood deform, and what can be done about it. December 28, 2005

    Stacking Laminations in a Vacuum Bag
    Stacking multiple pieces in one vacuum bag to save time increases the likelihood that pieces will not be under sufficient pressure. March 16, 2015

    How Do I Land Side Woodworking Jobs?
    11/26/2014

    Pricing a Custom Piece of Furniture
    A custom cabinet-maker asks for input on pricing a specially-ordered free-standing chest of drawers. The discussion covers a lot of ground on estimating, pricing, and the difference between cabinets and furniture. October 19, 2005

    Building an Entry Door
    Here's a boatload of advice and commentary for a woodworker contemplating his first entry door. August 29, 2014

    Beaded Face Frame Joinery
    Detailed explanations with photos and drawings of how to achieve nice jack-miter joints on beaded face frames. April 16, 2009

    Honeycombing and Fresh Checking in a Newly Turned Newel Post
    A woodworker's report of a honeycombing and checking problem leads to a good discussion of wood drying defects and how they manifest themselves. March 3, 2009

    Blemishes on Granite Countertops
    What seems like a mar or mark might be the natural look of stone, or it could be residue from a spill. In any case, granite is hard to touch up. October 2, 2005

    Home-built band blade sharpener
    Plans and pictures. February 18, 2003

    How to Play 'The Circle Game'
    Bad economies are inevitable. Here's how woodworking businesses can prepare. 1998.

    Preparing for Bad Times
    Bad economies are inevitable. Here's how woodworking businesses can prepare. 1998.

    Beaded Face Frame Fabrication
    There's more than one way to bead a frame, as this discussion proves. January 24, 2005

    People -- Your Biggest Key to Profitability
    Creating a productive, inclusive shop atmosphere that encourages employee initiative. 1998

    How to move logs
    Creative and practical ways of loading, unloading and transporting logs. Illustrated. (Sawing and Drying Forum) March 23, 2003

    Buffing out a lacquer finish
    Finishers share their secrets for achieving a hand-rubbed lacquer finish. September 6, 2000

    Hourly Shop Rate, Overhead, and Labor Burden
    Shop owners discuss the factors that go into setting a profitable hourly shop rate. February 11, 2009

    Building a Business Plan
    One in a series, looking at the relationships between woodworking companies and the businesses they deal with. 1998.

    Hiding Laminate Seams in Cabinetry
    There's no easy way to disguise the dark corner edges of white laminated cabinet faces. April 17, 2009

    Board-Foot Lumber Measurement Confusion
    A woodworker tries to figure out how to make sure he's ordering and getting the amount of wood he actually needs. January 20, 2010

    Pricing Lumber in a Down Market
    A conversation about how to charge practical prices for lumber sawn from old, legacy trees. January 25, 2010

    Humidity, Moisture Content, and Lumber Storage
    Lumber moisture content equilibrates to ambient relative humidity. Here are details. December 9, 2010

    Panel Saw Chips Melamine Inside The Book
    Voids between stacked pieces could be the culprit. April 10, 2005

    Bandmill Blade Sharpening on a Budget
    Advice on setting up to sharpen and set bandmill blades, with a minimum investment of money (if not time). June 18, 2010

    Pivoting Bookcase Show and Tell
    Photos and video of a unique project: a bookcase that pivots to hide a client's master bedroom. June 15, 2014

    PVC piping -- OK for dust collection?
    Why PVC piping is not safe for your dust collection system. March 19, 2001

    Planing a Tapered Timber
    Ideas for surfacing a 13-foot tapered redwood timber — while keeping the taper. June 12, 2006

    Basic drying room components
    Finishers offer advice on the essential elements in a drying room. October 24, 2001

    Baseball Bat Billets
    Tips on sawing and drying rough stock for bat makers (a tough market to break into). June 18, 2010

    Halogen lighting: Passing the temperature test
    How high-heat halogen lighting is tested for safety, to ensure it is appropriate for various applications. - 1998

    Building interior room doors
    Pros share their methods for constructing custom interior doors. June 6, 2001

    Building Paneled Sides on Kitchen Cabinets
    Design and construction ideas for face-frame cabinet end panels. June 4, 2012

    Preventing Sagging in a Large Driveway Gate
    Advice on bracing and post details to prevent a large, heavy gate from sagging in service. February 6, 2010

    Preventing Mold Formation on Freshly Sawn Pine
    Surface dryness is the best answer to preventing mold from getting a foothold on sawn softwood. Here are tips on how to achieve it. April 18, 2010

    How Long Can a Log Sit Before Sawing?
    How old is too old to be worth sawing, for down logs or standing dead trees? February 4, 2011

    Powderpost Beetle Infestation
    A load of lumber bought at an auction turns out to have tiny beetle holes in it. Now what? October 19, 2013

    Back-Beveling Tips
    Fine points of back-beveling jointer knives. May 13, 2005

    Purchasing Imported Equipment - The Currency Exchange Rate and Cost
    The currency exchange rate can have a significant impact on the purchase price of equipment. July 11, 2002

    Health hazards of wood dust
    Studies have shown that breathing wood dust can be hazardous to your health. 1998.

    Pressure treated lumber -- O.K. for grape arbor?
    A look at pressure-treated woods, then and now, and safety factors to consider in using them. 1998.

    Hard maple cracks and causes
    Potential causes for hairline cracks in dried hard maple. 1998.

    Humorous Quotes and Sayings
    Wise one-liners worth framing and hanging on the wall. November 5, 2013

    Preventing kickback
    Diagosing the causes of recurring kickback, and finding cures. 1998.

    Best preparation for bent ash
    Dr. Gene advises a fishing-net maker on the best ways to prepare ash for bending into frames for his products. 1998.

    How Many Hinges?
    This thread includes a handy chart for deciding when a door large or heavy enough to require a third or fourth hinge. August 12, 2014

    Preserving a cedar deck
    Best methods for treating and protecting wood decks from decay. 1998.

    Basic glazing
    Glazing steps for the novice. April 9, 2003

    Buckled veneer is manufacturer's fault
    except letting the manufacturer hear about it. 1998.

    Birch for outdoor tool handles?
    White birch's comparative weakness renders it a poor choice for handles on tools that must sustain high impacts. 1998.

    Positive tints
    Some ideas for controlling color intensity and depth in stained finishes. 1998.

    Basic lumber grades
    An overview of NHLA grades. October 15, 2001

    Preventing brown stain on pine
    Warm weather is the culprit; keeping still-to-be-processed logs cools is the solution. 1998.

    Bending gun stocks
    Advice on bending lumber in general and gun stocks in particular.1998.

    Biscuit Casing and Jointing
    Tweaking a biscuit jointer, and slotting casing for biscuits. January 28, 2007

    Plugging and Un-Plugging Screw Holes
    Plugging screw holes and removing plugs when they break off. January 28, 2007

    Cutterhead balance
    Solving the problem of a vibrating planer/moulder. January 16, 2002

    Selecting a CAD Program
    The up and down sides of various CAD choices. June 28, 2005

    Refrigerator Cabinet Dimensions
    A discussion of the practical and esthetic choices around boxing in a refrigerator. April 29, 2012

    Snapping to Perpendicular in AutoCad
    Savvy drafters know half a dozen ways to get square. June 28, 2005

    Milling lumber from logs
    Here's the steps it takes to harvest, skid, and mill a log into lumber using my Norwood Lumbermate band saw mill. April 25, 2001

    Face Frame Width Issues
    Structural and esthetic design considerations influencing face frame widths. April 10, 2012

    Cabinet Drafting Programs
    Comparing top cabinet-shop CAD applications. June 28, 2005

    Removing Old Glue from Furniture
    Tips and tricks for softening hide glue or old formulations of carpenter's wood glue. April 24, 2012

    Weight of Eastern Red Cedar
    Information on calculating the weight of Cedar lumber. January 8, 2010

    Shading and Toning Eastern White Pine
    Advice on how to achieve a consistent, uniform dark color on white pine. July 17, 2008

    Glue Line Rip Saw
    Will a straight-line rip saw make cuts clean enough for glue joints? November 18, 2006

    Purpose of Back Relief Cuts on Mouldings
    Mouldings are machined on the back as well as the face, for several important reasons. August 23, 2006

    Work-Station Shop Organization Systems
    Thoughts on a shop setup that involves moving the workpiece from station to station, rather than moving pieces and tools onto and off of a single work bench.May 23, 2011

    Wing Back Chair Show and Tell
    A carpenter learning as he goes on a set of wing-back chairs shows his work, and gets feedback from a tough crowd. October 19, 2013

    Plywood Thickness for Cabinet Construction
    What starts out as a question about 1/4" versus 1/2" plywood for cabinet backs, turns into a long discussion of what plywood cabinetmakers prefer for building carcases, and why. January 20, 2007

    Marketing 101 for a Small Cabinet Shop
    A two-man cabinet business builds a good product, but needs more customers. Here's a raft of advice on how to build name recognition and make personal contacts. November 29, 2014

    Starting a cabinet business
    Pros give pros and cons involved in starting a new cabinet business

    Best Ways to Advertise
    How to get the word out that you're in business and available for work. November 22, 2004

    Business Start-Up Advice
    Woodworker asks about a business start-up kit, and gets an earful of wise advice.

    Methods for Pricing Cabinet Work
    After years of estimating cabinet costs box by box in detail, you may have enough data to start taking short-cuts. October 2, 2007

    Learning About Edgebanders
    Advice for a woodworker who is in the market for a very low-priced edgebander, and wants to educate himself about edgebanders and other machinery. March 13, 2014

    Proper Depth for Frameless Cabinets
    In a long discussion, cabinetmakers share observations, opinions and experiences about the dimensions of frameless cabinets. December 14, 2005

    Corner Chisel Fine Points
    Tool choice, sharpening methods, and hand techniques for cleaning out mortise corners. November 13, 2009

    Optimal Joint Method for Making Curved Beams
    Woodworkers discuss the best way to fabricate a curved beam, and learn about an interesting historic example of curved laminated timber barn construction. October 19, 2013

    Dressing Stock, Stress, and Movement
    A discussion of planing and jointing techniques: Does wood need to "rest" between passes? April 30, 2009

    Shop-Built Beaded Face Frame Notching Machine
    A Woodweb member displays the machine he invented and built to automate the notch cuts for beaded face-frame joinery. June 15, 2009

    Cedar Log Value
    A wandering thread, but you can learn something here about Cedar (or whatever y'all call that tree). February 3, 2011

    Tales of Lightning Strikes on Trees
    Woodweb members tell their stories of lightning strikes. February 15, 2015

    What Does It Take to Start a Business?
    Besides woodworking skill, what characteristics does a person need to start up a wood shop business? The question sets off a long and thoughtful discussion on the Woodweb Business forum. September 4, 2005

    Choosing Table Saw Blades
    Thoughts on table saw blade selection for cutting plywood and for ripping hardwood. March 26, 2010

    Should You Pay Workers for Travel Time?
    Business owners discuss whether workers should get paid for driving from the shop to the job site in a company truck. April 4, 2011

    Screening Job Applicants
    Woodshop owners discuss the methods they use to assess prospective employees. April 19, 2015

    Training for a Moulder Operator
    Hands-on professional training is vital for anyone setting out to operate ond of these complicated and powerful machines. May 12, 2005

    Twisting cabinet doors
    Only changes in moisture content cause wood to change in size or shape. 1998.

    Durabilité du robinier noir pour terrasses extérieures
    Discussion sur l'adéquation du bois de robinier noir à une utilisation en extérieur comme terrasse ou pour des bancs. 6 mai 2009

    Modifications de serrage pour scies à table coulissantes
    Voici une discussion sur les configurations de serrage construites sur place pour le curseur, avec quelques photos instructives. 17 juin 2009

    Struggling to Get Paid
    Cabinetmakers discuss payment problems in the industry, and compare contract and billing strategies. July 3, 2006

    Glue Joint Ripping Capability on the Gang Rip Saw
    Tim Brown of Mereen-Johnson Machine Company offers tips on stock prepping, equipment setup, maintenance, and operation that can allow you to achieve a joint suitable for edge gluing directly off the gang rip saw. August 6, 2010

    Drying and Sawing Tips for Gun Stocks
    Advice on how to dry and saw walnut for use as gun stock blanks. August 21, 2006

    Selling Services to Builders or Other Shops
    How does a small solo woodworker approach builders or larger shops to get extra work? July 3, 2006

    Grit Selection for a Wide-Belt Sander
    Advice and experience about sandpaper and the sanding sequence. June 29, 2005

    Chair Making Equipment
    The category "chair-making equipment" includes a wide variety of specialized and more general tools and machines. September 20, 2008

    Restaurant Booth Specifications
    Basic information on appropriate dimensions for restaurant booth seating and tables. November 10, 2006

    Removing Router Burn Marks
    Tips on getting a clean surface when routing wood. June 9, 2007

    Optimizing Materials Versus Speed when Cutting Parts on a Slider
    Wasted time is pitted against wasted material. November 30, 2009

    Tooling Up to Make Doors
    An extended discussion of the best investment in equipment for a cabinetmaker who wants to start making his own doors. March 26, 2010

    Correcting Stair Riser Height in Place
    An old stair stringer with incorrect riser dimensions needs fixing, on site. Here's a long discussion about how to do it. July 30, 2009

    Equipment and Curriculum for a Woodworking School
    Woodworkers discuss the shop equipment, software, and focus appropriate for a serious secondary school program intended to train professional woodworkers. July 27, 2008

    Joinery Methods for Attaching Face Frames to Cabinets
    A long discussion on various joinery methods for face frame fastening. June 16, 2010

    Machinery Choices for "Hollow Joints" on Rips and Glue-Ups
    A conversation about the machinery and tooling required to create "hollow joints" for strong glue-ups. May 16, 2014

    Buying CNC Equipment for Woodcarving
    A woodworker gets advice on the pitfalls awaiting the unwary buyer of CNC gear. July 21, 2006

    Buffing Orange Peel Out Of Lacquer
    To remove the orange peel and achieve a high gloss, move up to fine grits in stages. January 14, 2013

    Fine Points of Pin Nailers
    Tips on avoiding jams and increasing counter-sink depth. October 26, 2005

    Bonding for Small Jobs
    Even if you're a relatively small subcontractor, you may occasionally be asked to post a bond. It's not so complicated. July 20, 2011

    Clamping and Fastening Mitered Cabinet Corners
    Advice on tape, clamping jigs, and the like for holding mitered corners in place for careful, accurate fastening. July 13, 2010

    Spraying Satin Polyurethane with an Entry-Level Gun
    Can a beginner get decent results spraying poly with an "El Cheapo" gun? Pros chime in with advice. May 17, 2005

    Pin Nailer Choices for Door Construction
    Cabinetmakers discuss the good points of different pin nailers for building doors. September 16, 2013

    Sizing a Compressor for Spraying in the Field
    A cabinetmaker is bringing his shop spray gun out on site. What will he need for a portable compressor? July 8, 2005

    Clean Cuts in MDF
    Saw marks on cut edges could be a problem of fence alignment. Here's some advice on getting straight, clean cuts. October 9, 2006

    Powder Post Beetle Infestation
    Don't put those timbers in your house. January 29, 2009

    Subcontracting Finishing Work
    An unfinished furniture maker considers contracting out finish work, and gets advice (mostly con). October 2, 2005

    Glueing Jatoba
    Dense, cross-grained and tight-pored, Jatoba wood must be well machined in order to achieve a strong glue joint. January 26, 2008

    All About PPR Glue
    Want the low-down on Powdered Plastic Resin glues? Here's everything you need to know. October 20, 2005

    Scribing three edges
    Templates, tic sticking and more for efficient scribing in difficult situations. September 20, 2003

    Machines and Tools: Cost Versus Value
    Are expensive tools worth the money? Are cheap tools worth the hassle? Pros on the Woodweb Business Forum talk about how much to pay for quality equipment, and why. September 4, 2005

    Cabinet Door Shop Set-Up Necessities
    Specializing in cabinet doors isn't a business you can easily jump into. Here's a lively discussion about "barriers to entry" — the minimum scale required for success, and the equipment you'll need to compete. December 14, 2009

    Blade Choices for Table Saws
    Thoughts on which saw blades work best for which materials, and some general info on saw blade characteristics and maintenance. December 27, 2010

    Shopping for a Bandsaw
    The perennial question: an economical import, or some second-hand American-made iron? April 13, 2010

    Drilling a Hole the Length of a Log
    People have actually succeeded at drilling holes in logs the long way. Here, they explain how to do it. December 27, 2006

    Granite Countertop Underlayment
    Depending on thickness, granite countertops may be self-supporting without underlayment. September 5, 2006

    Loose Tenon Size for Door Construction
    Thoughts on a practical size for loose tenons and mortises in man door construction. October 13, 2009

    Estimating Sheet Quantities for Cabinets
    Advice on "guesstimates" and more precise calculation of the number of sheets needed to build a set of cabinet boxes. September 7, 2006

    Hole Filling Tips
    Advice on filling and hiding holes in an obvious visible location on cabinet doors. November 11, 2006

    Saw Blades for Laminate Flooring
    Laminate flooring will eat up any saw blade. Most installers use cheap blades and expect to wear them out. August 13, 2007

    Pricing Trim Work
    Stay away from square foot pricing for finish carpentry. Here are details on how to price by the piece and the joint (and factor in aggravation). June 23, 2006

    Financing a Building Purchase
    A woodworker's landlord is selling the property, and the tenant wonders if he can afford to buy it. January 9, 2008

    Painting Exterior Wood
    What solid-color paint will hold up on an outdoor porch swing? Finishers kick around the choices. May 11, 2006

    Stating Dimensions for Crown Moulding
    Crown molding sizes can be looked at two ways: The thickness and width of the board, or the vertical and horizontal distances it will span when installed. Depending on the situation, either could be important. December 2, 2006

    Using OSB for Stickers
    Sawmill pros generally frown on using oriented strand board (OSB) for sticker material. January 17, 2011

    Vacuum Kiln Principles
    Vacuum kilns cause evaporation at low temperatures, but they still require heat — and that heat is tricky to supply because of the vacuum. Here's an explanation. July 29, 2011

    Production Machinery for Solid Surfacing Fabrication
    Thoughts and advice for a solid-surfacing shop owner on investing in equipment such as panel saws or CNC routers. October 2, 2005

    Climb Cutting with a Moulder
    A shop owner considers the pros and cons of climb-cutting cedar and redwood on a moulder. May 28, 2006

    Automotive Paint on Wood?
    Two who have tried it say it works beautifully. July 8, 2005

    Blade Life when Cutting Melamine
    Melamine tears up saw blades. Here are some observations on blade life expectancy, some thoughts on blade choice, and a success story involving diamond blades. August 14, 2007

    Fans and Grilles to Cool a TV Cabinet
    A cabinetmaker gets help figuring out how to get enough air moving to cool a big, hot television unit. July 11, 2007

    Compression Bit Size: What's Best
    Half-inch bits run faster, but the 3/8-inch size wastes less. April 10, 2005

    Income Goals for a Furniture Maker
    How to approach the calculations involving cost, overhead, and labor time for a one-man craftsman business. November 16, 2011

    Solid Surface Pricing
    A little info on the solid surfacing market, circa 2006. September 26, 2006

    Fixing a Dent
    A ding in a brand-new cabinet — what's the solution? Experienced craftsman suggest several fixes. July 9, 2005

    Whether to Finish Hidden Cabinet Ends
    Cabinetmakers discuss whether to finish the ends of cabinets that abut slide-in appliances. April 9, 2008

    Cleaning Finished Cabinets
    The pros debate soaps, detergents, cleansers, and polishes. Are they all just bad, or should your finish be able to take anything? Or is the truth somewhere in between? July 10, 2005

    Diagnosing Problems Related to Frozen Glue
    Woodworkers discuss what happens when glue freezes in the container. April 10, 2009

    Options for Finishing Cherry
    Cabinetmaker gets advice on finish combinations and application techniques. July 9, 2005

    Durable Finish for a Kitchen Table
    Advantages of conversion varnish versus two-part bar-top resin. July 9, 2005

    Calibrating Wood Thickness for CNC Part Production
    A CNC shop needs help figuring out how to achieve consistent thickness on stock before sending it to the CNC for cutting into small parts. The discussion ranges over belt sander accuracy, planer choices, onion-skinning techniques, and more. April 21, 2008

    Finishing mahogany
    Producing the dark color expected of mahogany. February 12, 2003

    Troubleshooting Finish Flaws on a Piano
    Is that fish-eye or orange peel on that piano? Finishers help a colleague diagnose and treat a problem with conversion varnish. May 17, 2005

    Eliminating Scratches in Glaze
    Stubborn sanding scratches appear when a piece has been glazed... can this be avoided?January 6, 2005

    Filling grain
    Basic methods for filling grain and finishing. April 9, 2003

    Red Oak Finishing Basics
    Advice on sanding, formulas, and schedules for good results with Red Oak. June 28, 2006

    Compressor and Gun Air Pressure Settings for an HVLP Spraygun
    Set the compressor a little high and the gun a little low, then dial it in with test boards — here's how. April 19, 2011

    Resources for conversion varnish
    Learning the fundamentals of finishing with CV. September 2, 2002

    Water-based basics
    A primer for folks interested in using water-based stains and topcoats. 1998.

    Working with Tamarack Wood
    A discussion of Tamarack's suitability for board and batten siding, and for other uses. December 28, 2006

    Louvered Shutter Specs
    Quick advice on dimensions and assembly details for custom-built louvered window shutters. March 4, 2007

    Fumes escaping from lacquer drums
    Options for sealing 55-gallon drums of lacquer to prevent fumes from escaping. 1998.

    Reground Planer Knives Trapping Chips
    Woodworkers help figure out why chips won't clear out from the workpiece after a set of planer knives comes back from the grinder. March 14, 2006

    Power Comparison Between Electric and Gasoline-Powered Bandmills
    Electric motors have more torque at the same horsepower rating. Here's a discussion of the reasons. March 14, 2006

    Hanging Cabinets on Plaster Walls
    Cabinet installers discuss the classic old-house problem: finding some meat behind the plaster. March 18, 2006

    Removing Ring Marks in a Veneered Table Top
    Refinishing pros offer opinions on how to refinish a badly marred wood-veneer table top. November 12, 2006

    Sharp Edges on PVC Banding
    Trimmed edge-banding can be sharp enough to cut people, so it's best to file off the edges. November 10, 2006

    Gluing Teak2
    Clean the oil off the surface to achieve a good bond. December 2, 2006

    Shaper Setups for Complex Joinery
    Here's a long thread that delves into shaper choices and shop rigs and jigs for advanced joinery such as mortise-and-tenon window sash. October 14, 2008

    Hazards of Wearing Gloves in the Shop
    Gloves have their place, but they create risk around woodworking machinery. August 29, 2006

    Shellac and Lacquer On Rosewood
    One finisher's S.O.P. for finishing Rosewood. May 21, 2009

    Recutting Installed Countertops In Place
    Advice for trimming a few inches off a laminate countertop, in place. January 9, 2006

    Wetting Wood Joints Before Gluing
    Dampening a joint before gluing helps the adhesion of polyurethane glues, but not yellow glues. January 22, 2006

    Packing Materials for Finished Furniture
    without scratching the finish. February 13, 2006

    How Varnishes Cure
    A short but intense primer on the ways various varnish formulations harden and cure. December 31, 2005

    Maximum Cabinet Door Width
    The industry standard is 24 inches, but cabinetmakers have reason to prefer even narrower doors. February 9, 2006

    Architectural mouldings on CNC routers
    A discussion of the ins and outs of producing architectural mouldings on CNC routers. June 14, 2000

    Wide Belt Sander Platen and Drum Issues
    Understanding how the platen and the drum interact can help you get the best performance from a widebelt sander. July 15, 2012

    Sawing and drying mesquite
    Dealing with many-trunked mesquite trees. February 6, 2002

    Drawer Socket Breakage
    Cabinetmakers discuss how and why drawer-slide socket hardware may break. October 13, 2005

    Time and Temperature Curve to Kill Bugs
    Here's a little basic info on bug killing with heat in thicker pieces of wood in the kiln. June 22, 2012

    Round timbers and ties
    Round timbers and ties represent some of the most efficient uses of our forest resources. They require a minimum of processing between harvesting the tree and marketing the structural commodity. Poles and piles are debarked or peeled, seasoned, and often treated with preservative prior to use as str ......

    Stacking and Stickering Advice for Air-Drying Maple
    A thorough discussion of the basics of stacking sawn lumber for air-drying. February 14, 2010

    Assembling and Gluing Staved Columns
    Here's a boatload of advice and ideas about how to put together and glue octagonal columns made with staves. October 23, 2007

    Estimating and Pricing Commercial Work
    Big, complicated jobs are an opportunity to make or lose money through the accuracy of your estimating. Here is some advice on coming to grips with the details that determine your costs. October 23, 2007

    How to Avoid Three Profit Robbing Procurement Mistakes
    Don't step over dollars to save pennies, says a management expert. April 15, 2006

    Cutting Techniques for PVC Board
    A fabricating shop has problems working with expanded PVC foam board. Colleagues share advice on cutter choice, feed rate, and more. July 11, 2005

    Electrical Outlets in Cabinetry
    Electrical code requires outlets to be installed within properly mounted electrical boxes. April 26, 2006

    Compensating Employees Who Opt Out of Health Insurance
    Should employees who opt out of your company's insurance plan get a little something extra in their check? Maybe not — the practice could create complicated tax issues for you. April 24, 2006

    Gel Stain Pros and Cons
    Is gel stain "second cousin to paint?" (And is that bad?) September 26, 2006

    Repairing Scratches in Glossy Laminate
    From quick and simple to time-consuming and elaborate, here are ways to get a visible scratch "below the radar." September 26, 2006

    Dust Collection Direct to a Trailer
    Shop owners discuss ways to rig a dust collection cyclone so it dumps directly into a trailer. September 24, 2006

    Dealing with Silicone Damage
    A refinisher asks how to get silicone off a conference table he's refinishing, and gets a handful of ideas. June 28, 2005

    Subtops Under Solid Surface Countertops
    Solid surface is not installed over a subtop, but over (at most) widely spaced mounting strips (and let the installer worry about those). September 26, 2006

    Repairing Scratched Melamine
    No repair is perfect, but here are some pretty good options for a surface gouge in a melamine cabinet interior. September 23, 2006

    Problems with Chinese Plywood
    Cabinetmakers report widespread quality and performance problems with hardwood plywood imported from China. May 22, 2007

    Rabbeting Exterior Doors for Compression-Bulb Weatherstripping
    Advice on how to cut clean slots for weatherstripping in door jambs. May 5, 2007

    Complementary Woods for Mahogany
    Furnituremakers suggest woods to match with Mahogany for visual appeal. July 30, 2007

    Adhesive for Applying Finished Skins to Cabinet Ends
    A cabinetmaker seeks advice for attaching finished ends to new cabinets. May 21, 2007

    Charging Cordless Tools with your Vehicle
    Truck batteries, deep-cycle backup batteries, power inverters, and cordless tools — what's the deal? May 6, 2007

    Blum hinge drilling locations
    Determining the edge setback for drilling in the use of Blum hinges. March 20, 2001

    Hazards of Pressure Treated Wood
    Advice on safety precautions when using treated wood. October 25, 2006

    Eliminating Overspray on Door Backs
    Finishers explain how to keep overspray off cabinet door backs when spraying the fronts. September 11, 2006

    Hinge Choice for Larger Overlay
    Advice on designing face frame cabinets with overlay doors that are very close together at the edges. June 22, 2010

    Restricting Cabinet Door Swing
    Options for restricting cabinet door outswing to prevent collisions. May 15, 2012

    Troubleshooting CNC Controller Errors
    When a CNC device makes an unexplained move or cut, how can you isolate the source of the glitch? September 3, 2010

    Removing Lacquer Without Removing Stain
    A guitar repair job brings up the tricky problem of how to gently remove lacquer from a stained piece. March 8, 2007

    Painting over Lacquer
    Tips on surface preparation and priming when applying paint to a lacquered surface. March 8, 2007

    Guess the Wood Again
    Eyeballing a wooden chest and trying to guess the species. (It's not Walnut.) April 20, 2011

    Rosette Cutting Speed
    Drill press RPMs tend to be too slow for great success with machining rosettes, especially in difficult wood. May 21, 2009

    Enhancing Oak Grain with Dyes and Glazes
    Tips (illustrated with photos) on bringing out depth and figure in white oak. December 31, 2005

    Buffing to Reduce Sheen
    Pros share tips and tricks for dulling a too-shiny tabletop. December 31, 2005

    Music in the Shop
    Is it good, bad, or both? June 22, 2005

    Flat Faces on Shop-Built Doors
    An exchange of views on lumber handling, door assembly, tolerances, and the meaning of "high end." June 18, 2005

    Self-Countersinking Screws
    The pros and cons of screw-head "knibs." June 22, 2005

    Dulling Down Gloss in a Lacquer Repair
    Tips on matching the sheen of a coating repair to the surrounding area. December 2, 2009

    Avoiding Swirl Marks in Finish Sanding
    Grit choices, sander type, and technique can all affect finish sanding performance. May 6, 2010

    Polishing Polyurethane to a High Gloss
    Buffing compounds, sanding materials, and techniques for that super-high final shine. May 24, 2006

    How to Make an Oak Mantelpiece Look Old
    Finishers kick around ideas for distressing a new oak mantel to match some old oak furniture (the catch: the finish has to resist heat). December 8, 2006

    Low-sheen finishes
    Are streaks and scratches impossible to avoid with hand-rubbed finishes? June 24, 2001

    Can a Beginner Make a Living with a Portable Sawmill?
    Experienced sawmill operators counsel a newcomer on his odds of success with buying and operating a sawmill in a tough market — and describe what his life will be like if he tries it. November 16, 2010

    Setting Shop Temperature
    A long discussion about how warm (or cool) to keep a shop, whether to turn the heat down at night and over the weekend, and the effect on costs, productivity, and quality of different practices. December 24, 2012

    Rates for custom milling
    An extremely detailed look at different systems of charging for custom milling. May 30, 2001

    Adhesives and Glues Compared
    Lots of good background info on traditional glues and modern adhesives in this long thread about gluing an Ipe edge to a countertop. January 20, 2010

    Black locust uses
    The best uses of black locust, then and now. January 4, 2001

    Building a "Club Couch" from Scratch
    A newcomer to furniture building learns on his first couch, and gets feedback. October 19, 2013

    Chainsaw Sawmilling for Old Guys
    Here's a great discussion on the capabilities of chainsaw mills, from the point of view of some dudes who have gotten smarter over time. February 27, 2013

    Using Photos and Video to Analyze Processes
    Woodweb's "LEAN" seminar thinks about using pictures to develop insight into shop workflow issues. May 6, 2009

    How to Limit Cracking when Drying Wood Discs
    A discussion of principles and techniques for drying cross-cut log slices with limited cracking. July 16, 2009

    Advantages of vacuum drying
    What does this leading-edge technology have to offer? April 9, 2003

    Tough Finishes for Table Tops
    A wide-ranging discussion of various approaches to finishing table tops. Your choice will depend on the intended use and the preferred appearance. January 14, 2009

    Gluing Teak to Plywood
    Advice on surface prep and adhesive choice for glue-up of teak and plywood doors on a boat. October 13, 2010

    Crown Moulding Corner Fastening Techniques
    Advice on using adhesive to fasten outside corner joints in large crown moulding, along with other practical tips for installing crown. October 12, 2007

    Poplar in Exterior Conditions
    Although some people have noted 100-year-old poplar porch posts that are still sound, poplar generally seems to rot quickly in exterior use. November 10, 2005

    Glue Joint Movement — Causes and Cures
    Here's a wide-ranging discussion of adhesive properties and glue joint behavior, triggered by a specific problem involving a raised glue line in a Cherry countertop. October 19, 2014

    Starting a portable sawmilling business
    Advice on making a living with a start-up sawmilling business. June 24, 2001

    Glue Choices for Applying Veneers
    Pros dig into the fine points of glue selection for veneering, compare the qualities of different adhesives, and discuss veneer application techniques. October 1, 2005

    Gluing Ipe Wood for Outdoor Exposures
    Ipe's oily nature is not conducive to strong glue joints, especially when movement stress occurs. Here are some reports of success and failure at gluing Ipe in outdoor situations. December 26, 2007

    Staining Edgebanding for Prefinished Plywood
    Ways to make edgebanding match drawer and door faces when using prefinished plywood to build frameless cabinets. December 30, 2005

    Steel Support for an Overhanging Granite Countertop
    Advice on the use of structural steel to support a stone counter, without overkill or excessive weight (and cost). April 9, 2008

    Glue Spots that Appear After Stain is Applied
    A description of scraping, sanding, and touch-up techniques for correcting unsightly glue spots, with some advice on prior prevention strategies. June 8, 2011

    Pin Nailers Versus 18-Gauge or 23-Gauge Nailers
    Installers discuss the relative usefulness of various fastener sizes and types for attaching prefinished crown moulding to cabinets. February 21, 2006

    Thinning Polyurethane for Spraying
    Many different solvents can be used to thin poly, but the resulting slow-drying overspray can turn into a serious problem. September 14, 2006

    Constructing with poplar
    Is poplar appropriate for building? February 6, 2002

    Adhesives for Cabinet Refacing
    Pros discuss how to adhere paper-backed veneer to an existing cabinet. September 5, 2006

    Using PEG for dimensional stability
    The discovery and use of PEG for stabilizing previously unseasoned lumber. 1998.

    How to quartersaw
    Sawyers share details and pictures of their preferred methods. May 17, 2003

    Glue Choices for Tight or Loose Joinery
    Epoxy does best with a looser joint, while other adhesives perform better with tighter joinery. August 29, 2011

    Treating Burls With Pentacryl
    Is pentracryl a proper treatment for burl wood, or are other sealers more suitable? January 6, 2005

    Calculating board footage
    Professor Gene Wengert explains it all. February 18, 2003

    Gluing OSB to OSB
    Glue choices and clamping techniques for gluing oriented strand board sheets together, face to face. August 23, 2006

    Adhering Glass to Wood
    Advice on gluing glass into grooves in wood frames for the sides and back of a small cabinet. July 30, 2009

    Removing Turning Blank Pith
    Techniques to prevent cracking from the pith. January 6, 2005

    Glue for Joining Handrail Pieces
    Advice on getting a good solid joint when connecting handrail sections. May 12, 2008

    Solar kiln kits and plans
    A discussion of various solar kiln plans and kits. June 20, 2000

    Gluing Treated Lumber
    Preservative treatments leave wood wet. But once it dries thoroughly, adhesives should be able to grip. October 2, 2007

    Bandmill Tuning Basics
    A beginner gets the Rx for wavy cuts. June 12, 2006

    Smooth-tracking sawmill
    Keeping the track rollers on your sawmill running with ease. July 3, 2001

    Glue Choice for Laminate Top Assembly
    Advice on adhesive choice and assembly techniques for a countertop joint. June 22, 2012

    Tips for Sawing Hickory
    Quick tips on getting good lumber from Hickory logs. November 8, 2007

    Moisture Content While Gluing Teak
    Advice on adhesive choice, surface prep, and moisture content for gluing Teak. September 7, 2011

    Staining Maple
    More tips on getting Maple to accept a dark stain. May 17, 2005

    Vacuum Pressing a Scroll Table
    A furniture maker grapples with the problem of veneering a curved table shape. April 18, 2009

    Salt pastes and PEG
    Polyethylene glycol is high-priced, but the alternatives for stabilizing green wood are few. 1998.

    Working with Iroko Wood
    It's sometimes called "African Teak," but Iroko is not Teak, and does not act like Teak. May 7, 2007

    Lamination Thickness for Curved Door Rails
    Advice on specifying the laminations for gluing up a curved (bow front) door rail. June 16, 2014

    A brief history of wood glues
    Is there a difference between white and yellow wood glues? 1998.

    Working with Independent Sales Reps
    A discussion of the pros and cons of working with independent sales reps, including thoughts on the compensation schedule. September 29, 2010

    Buffing to a High Shine
    Progressively finer sandpaper, then buffing compound, will raise a liquid gleam on a gloss conversion varnish. October 9, 2006

    Dowel Versus Mortise and Tenon Joints for Attaching Table Legs
    Dowel joinery would save time on a large production run of tables. But will dowel joints be strong enough? October 1, 2010

    Troubleshooting a Blotchy Tung-Oil-and-Wax Finish
    Finishers try to figure out why a customer-applied oil-and-wax finish ended up looking like the aftermath of a bad sunburn. June 30, 2007

    Bits for Boring Holes in Laminate
    Cabinetmakers discuss choosing a bit to drill lock holes in laminate doors. July 31, 2009

    What is the Hardest Wood on Earth?
    Trivia for wood lovers. There is some hard wood out there, people. April 11, 2008

    Eyewitness: Injury
    Scary stories about careless acts and bad consequences. June 28, 2005

    Pricing a Bathroom Cabinet Job
    Pros share estimating tips and pricing strategies. June 22, 2005

    Price Negotiations
    Ways to handle a client who asks for a line-item breakdown of your estimate. June 29, 2005

    Choosing the Right Accountant
    Thoughts on what a really good accountant can do for your business. April 4, 2011

    Drawer Guide Socket Breakage
    What's making those plastic hardware pieces crack? Cabinetmakers talk it over. August 29, 2005

    Black Lacquer Applications
    Tips on quick, easy, and effective black finishes. January 27, 2008

    Staircase Standards
    Standard heights and dimensions for stair parts. January 24, 2005

    How Much Heat is Enough to Kill Insects?
    Information on the ranges of temperature and time required to kill bugs in wood. November 8, 2007

    Gypsy Moth Egg Case
    Identifying these egg cases in the woods. January 6, 2005

    Stiffening Long-Span Bookshelves
    Pros discuss ideas for limiting mid-span shelf deflection. June 18, 2005

    Flat Doors for an Appliance Armoire
    What materials would you use for flat-panel doors on a cabinet that will hold a mini-fridge and coffeemaker? February 27, 2015

    Finding a College-Level Woodworking Program
    Educational choices versus the school of hard knocks. June 18, 2005

    Cabinet Hanger Cleats
    Ways to install back-panel cleats for attaching cabinets to walls. June 18, 2005

    Choosing Dado and Groover Blades
    The voice of experience on different cutter brands. June 18, 2005

    Raised-Panel Wainscoting for a Spiral Stairwell
    true frame-and-panel wainscoting with concave panels rising up a spiral staircase. Woodweb's top trimwork minds chime in on this one for a top-flight discussion of a very tricky topic. July 9, 2007

    NC lacquer for kitchen cabinets
    Why shouldn't this old standby be used? March 23, 2003

    Sealing Plywood to Slow Down Formaldehyde Emissions
    Here's an extended discussion of whether, and how, to seal plywood in order to reduce the emissions of formaldehyde (or whether to purchase a different type of plywood instead). December 27, 2010

    "Floating" wood floors over concrete
    Suggestions for installing a solid wood, "floating" floor over concrete. June 6, 2001

    Recoating Over a Mystery Finish
    We're not sure what's on this table, but it might be polyurethane. Can anything safely go over it? Now that's a messy subject. October 14, 2006

    Fundamentals of Spraying Stain
    A finisher who's accustomed to working by hand gets advice on his first attempts at spraying stain. December 30, 2005

    Touching Up Scuffed Conversion Varnish on Baseboard in the Field
    Tips for a pesky but manageable on-site repair: touching up scratched CV varnish on baseboard in a newly carpeted house. March 13, 2009

    Tiny Bubbles
    Are tools or techniqes to blame for the bubbles appearing in this ICA poly? October 20, 2004

    A Cabinet as a Shower Wall?
    Crazy as it sounds, this question is real: In a tight-space remodel, how to build cabinets so their back side can be tiled and serve as the wall of a shower. Read and learn. May 6, 2007

    Recognizing Income in QuickBooks
    Advice on how to apply accounting methods that keep your profit and loss statements in step with your cash flow and the value added to your materials inventory. August 28, 2010

    Troubleshooting Milky White Discoloration on Wenge Veneer
    Cabinetmakers and finishers look at the weak points of a kitchen finish system. September 3, 2010

    Touching Up Furniture that Won't Take Stain
    Sometimes a piece is still sealed, or has been sanded down to a glue-saturated veneer ply. Here are tips on restoring color to those pieces. May 24, 2006

    Durable Clear Finish for a Handrail
    Durability and on-site practicality of various clear finishes suitable for handrails. May 7, 2007

    Finish Choices for a Mahogany Exterior Door
    The perennial problem: a clear finish tough enough for outdoor exposure. Bottom line, there's no such thing: sooner or later, the door will need recoating. Here, pros consider the tradeoff between the durability of the initial application and the difficulty of the eventual refinish job. June 28, 200 ......

    Attaching Plywood Panels to Drywall
    Fastening decorative plywood panels to existing drywall is tricky, but doable. In this thread, experienced hands explain several techniques. July 24, 2005

    Baseball Bat Finishes
    A discussion of good finishes for baseball bats for youth leagues. July 17, 2008

    Linseed Oil Finish for a Period Home
    The clients want an authentic old-time linseed oil finish. A contractor gets advice on how to make it work. July 9, 2005

    Mahogany Varieties for Countertops
    A discussion of the practicality of mahogany for a countertop, and thoughts about similar alternatives. November 7, 2007

    Dulling Down a Poly Finish
    It's hard to remove gloss by sanding or polishing. A new topcoat may be the only practical answer. July 3, 2008

    Shellac Under Oil or Varnish
    Finishers discuss compatibility and wear issues with using shellac in combination with Tung oil and varnish. October 13, 2008

    Bubbles in polyurethane topcoat
    What causes bubbles in polyurethane topcoats applied by brushing? March 24, 2000

    Cabinet Face Dimensions
    Thoughts about choosing practical and attractive dimensions for face frames, cabinet door stiles and rails, and drawer fronts. April 18, 2006

    Fitting Cabinets to Bowed Walls
    Cabinet-hanging and scribing tips for installations in kitchens with irregular wall surfaces. April 18, 2006

    How to Tell Maple Plywood from Birch
    Made into plywood, the two species look similar. Here are tips on telling them apart. January 11, 2007

    Troubleshooting a Conversion Varnish Table Finish
    Milky cast and unexpected damage — pros say too-thick application is the likely culprit. July 9, 2005

    Minimum Walking Space for Kitchens
    In a tight kitchen, how much space do you have to allow between a wall counter and an island?April 18, 2006

    Best Finish for Bar Top?
    Finishers discuss the options for a bar top, considering durability and the ability to apply on site. February 15, 2009

    Adhering MDF to Drywall
    Mastic or polyurethane glue should work. Here are some installation tips. May 5, 2007

    Are Automotive Clear Finishes Suitable for Wood?
    Those who've tried it say automotive clears work beautifully on wood. Here are tips and cautions. June 9, 2007

    Coating Over Tung Oil
    Once they're dry, tung oil finishes can be recoated with lacquer. November 12, 2006

    Cleaning Up Latex Paint
    Tips for getting a latex paint drip off a polyurethane finished surface. August 30, 2005

    Gluing Teak for a Wet Exposure
    Recommendations for finger-joint glue for temporary Teak timber shoring exposed to water. July 12, 2008

    Gluing MDF Miter Joints
    MDF soaks up ordinary wood glues, compromising the bond. Here's advice on priming the joint before gluing, or using a specialized adhesive. February 25, 2009

    Glossy Finish for an MDF and Wood Veneer Table
    Finishers recommend a two-part polyurethane, available as tinted or clear. February 21, 2011

    Urethane over Spar Varnish
    Hard urethanes won't last over a soft spar varnish finish. Instead, strip first, then refinish. September 11, 2006

    Vertical versus Horizontal Grade Laminate
    What the difference is, and when to use which. March 14, 2006

    Finishing naturally oily woods
    How to finish woods with high natural oil contents. 1998.

    Sanding and sealing MDF
    Steps for sealing exposed core areas of medium-density fiberboard. 1998.

    Crown Moulding and Ceiling Movement
    Here are some tips on installing crown so that it will keep looking good despite seasonal moisture-related movement of the house structure. December 26, 2007

    Gap Spacing Between Full Overlay Doors
    Thoughts on how far apart to space full overlay doors. January 13, 2008

      ---   Return to Top   ---   View More Results   


    Forum Results:

    Re: Cabinet Making
    A message posted at WOODWEB's Furniture Making Forum (6/25/24) -- Here's the issue: "FORUM GUIDELINES: Please review the guidelines below before ...

    Re: Seeking Shaker passage door shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Look at Woodweb's home page. You will find what you are looking for under will get ...

    Re: fabricating 'standard' handrail fittings
    A message posted at WOODWEB's Architectural Woodworking Forum (8/8) -- Adam, congrats, that is the nastiest comment I have ever received online. I do ...

    Re: Selling equipment
    A message posted at WOODWEB's Business and Management Forum (5/7) -- IRS auctions, Exfactory. I have found woodweb to be the most effective and if yo ...

    Re: Automotive finish on wood
    A message posted at WOODWEB's Finishing Forum (9/6/21) -- Thanks for all the responses. I remember in the late 70's and early 80's using Imron and De ...

    Take the Woodweb User Survey
    A message posted at WOODWEB's WOODnetWORK Forum (8/1/22) -- Hi Woodweb professionals! Your friendly webmaster (Jim Roberts) here. As you have *hopefu ...

    Re: Scaling High-end Residential Custom Shop
    A message posted at WOODWEB's Business and Management Forum (12/31) -- William, My point was this: it is extremely hard to make money in high end one ...

    Re: So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/31) -- 2020 will be our best year of 20 years in business. Currently booked through 2 ...

    Re: Making table tops / wooden panels more efficiently
    A message posted at WOODWEB's Furniture Making Forum (1/31) -- Thanks for that link, I ended up watching that series of videos to see what their pane ...

    Re: Making table tops / wooden panels more efficiently
    A message posted at WOODWEB's Furniture Making Forum (1/31) -- Paul, There is... www.practicalmachinist.com I build furniture using steel and wood as ...

    Re: So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/30) -- I am hoping the pre-election instability is one reason for the slow down. I fe ...

    Re: Wood web on an iPad
    A message posted at WOODWEB's Cabinetmaking Forum (6/30) -- It works fine on my iPad. Working on the original iPad Pro with current iOS on it. Are yo ...

    Re: Getting a Bonus
    A message posted at WOODWEB's Business and Management Forum (3/30) -- I do the same as a S corp. You should only come to the woodweb for legal advice ...

    Plywood construction
    A message posted at WOODWEB's Cabinetmaking Forum (1/30) -- Hi everyone, I've been following woodweb for years but never posted. I gained a lot of in ...

    Boring patterns-Line and Construction
    A message posted at WOODWEB's CNC Forum (12/29) -- Hello All Hope the Holidays have been good to you. Thanks in advance to any who answer or understa ...

    Re: Cabinet Lifts or Jacks
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/29) -- Back in the day, I picked up a Gil-Lift, and once I had it, never lo ...

    Carpenter bees & dried hardwood storage
    A message posted at WOODWEB's Sawing and Drying Forum (8/29) -- 1st. day with my woodweb account and not sure where this question best fits so here i ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/29) -- Hey David, why don't you post the model Number, could help track down the manual. And tha ...

    Re: 2K Poly over glued up panel
    A message posted at WOODWEB's Finishing Forum (4/29) -- Hi Jenny, I applaud your looking to woodweb for information. When i was younger we used solid ...

    Looking for photo of a project posted a couple years ago
    A message posted at WOODWEB's Architectural Woodworking Forum (3/29) -- A couple of years ago someone posted a photo of a wall of cabinetry with glas ...

    Re: New Mobile forums format
    A message posted at WOODWEB's WOODnetWORK Forum (11/28/21) -- Late to the party but I like the way the text loads on my phone. I most often look on w ...

    Re: Boss Router
    A message posted at WOODWEB's CNC Forum (10/28) -- there are previous threads on this on woodweb ...

    need freelance cabinetvision operator
    A message posted at WOODWEB's CAD Forum (10/28) -- I need to hire a freelance cabinet vision operator to help me out on a couple of projects. If you' ...

    Re: A little comic relief
    A message posted at WOODWEB's Cabinetmaking Forum (8/28) -- I'm retired now, but I learned many years ago the value of a contract. Thanks woodweb for ...

    Re: I've been building a dynamic component library for cabinetmakers and ar
    A message posted at WOODWEB's Cabinetmaking Forum (3/28/25) -- Hi Toby, Looks like an interesting concept. There will be a lot to do to get to get th ...

    Re: Help in Kansas Ciy
    A message posted at WOODWEB's Architectural Woodworking Forum (1/28) -- I see these folks advertising on the woodweb all the time Offering Services L ...

    Re: Business Mentor
    A message posted at WOODWEB's Business and Management Forum (1/28) -- You found woodweb, tell us some more about what and why ? ...

    Re: Prop 65
    A message posted at WOODWEB's Business and Management Forum (11/27) -- Lawyers looking for class action suits in Calif are ubiquitous. They are alway ...

    Re: Planning large planks of wood
    A message posted at WOODWEB's Solid Wood Machining Forum (11/27) -- WOODWEB has a resource available to assist in locating other woodworking professi ...

    Hand written punchlists
    A message posted at WOODWEB's Business and Management Forum (10/27) -- We are all familiar with using handwritten punchlists to finish up projects. T ...

    Re: Finding qualified finish employees
    A message posted at WOODWEB's Finishing Forum (9/27) -- Colby, Nice to see the Olhausen name. Many years ago I worked with Donny and finished a coupl ...

    Fiberglass door finishes
    A message posted at WOODWEB's Finishing Forum (7/27) -- Hey guys, I have found woodweb to be a great resource over the last couple years. I was one o ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- If people on the woodweb had the patience for it this thread could be a launchi ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Since I have never had 20 employees maybe you can learn me some stuff. It sound ...

    Re: Scammer on Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (12/26/22) -- Buying on the used machinery market is much easier than selling. OP fell fo ...

    Re: Table legs
    A message posted at WOODWEB's Furniture Making Forum (10/26) -- Do you understand about seasonal wood movement? I blew up the picture, and it looks l ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- I guess my point is that they have an entire gallery on the woodweb f ...

    Hiring Employees
    A message posted at WOODWEB's Business and Management Forum (3/26) -- I'm in the same boat as everyone else where to look for employees for our custo ...

    Re: Worried about warping: edge glued doors with no rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/26/22) -- Please don't use my advice in your arguing with the contractor. If you rev ...

    Re: CabinetPro
    A message posted at WOODWEB's CNC Forum (2/26) -- I have been using their CNC edition for approximately 2 years. For us it was our first CNC capable ...

    Re: Sinker Log Process Help
    A message posted at WOODWEB's Sawing and Drying Forum (10/25) -- Hi, All you need is the name of a local sawyer with a portable sawmill, who can come ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/25/25) -- If this is a money making venture and not just a one off then you will need to invest in a ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- Thanks for sharing that glass source David. I will check them out. My local g ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/25) -- Im going to crossband the individual veneers and probably use sizing to give me some extra worki ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/25) -- That's good insight. I have been in business for 5 years. I opened my own small ...

    Moulding line
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25/24) -- What is the best avenue for selling my entire moulding operation? I am going to ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Thanks Dave for forwarding the Thread - looks like he experienced the same t ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Inter ...

    Passing of Gene Wengert - "The Wood Doctor"
    A message posted at WOODWEB's WOODnetWORK Forum (3/24/25) -- The staff at Woodweb is saddened to hear of the recent passing of Gene Wengert, known as ...

    Dowel/Confirmat Assembly
    A message posted at WOODWEB's Cabinetmaking Forum (1/24) -- As a lot of posts start in woodweb, I have searched many posts, but have yet to find spec ...

    Re: Toxic Employee
    A message posted at WOODWEB's Business and Management Forum (1/24) -- Man, RoberNH,Larry, Rick,Kilgore, Pat and James (when I can sift through his di ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/23) -- "My largest question, is anyone making cabinet parts efficiently on these machines." the ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/23) -- you would think the woodweb moderator would comment on the subject as it directly rela ...

    Re: Felder Format CNC
    A message posted at WOODWEB's CNC Forum (5/23) -- No I am not a moderator, Just a Cab guy working stiff.. Woodweb makes those descisions Not Me .. Wh ...

    Re: Cell phones in the shop
    A message posted at WOODWEB's Business and Management Forum (4/23) -- Lmao Pat :) You got me-- everything is in shambles... I checked my phone after ...

    Bought a CMT 792 dial indicator
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I bought this dial indicator, but the problem is, I never replaced my blades in al ...

    Re: A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Woodweb Thanks for implementing some of the posters ideas, glad to see you actuall ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/22/21) -- One of the alternate joys of working wood that occasionally arises here at the 'Web i ...

    Re: Seeking Veneer Specialist
    A message posted at WOODWEB's Veneer Forum (11/22) -- Scott, WOODWEB has a resource available to assist in locating other woodworking professionals. ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/22/21) -- Fabulous!! Welcome to the 21st Century! Much more readable, better organizat ...

    Re: BauBuche LVL
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- Patrick or Gary.. I think woodweb is playing games with names. I did see the ...

    Re: using a wipe on oil-poly on cabinet doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- Rich, anytime you suspect someone posting is not a professional woodworker you make conde ...

    Re: Audio versions of Woodweb Articles?
    A message posted at WOODWEB's WOODnetWORK Forum (4/22/24) -- Thanks for the feedback - we took the first step and focused on general "woodworkin ...

    Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/22) -- Hello Woodweb! I am a custom homebuilder that has decided to open a cabinet sho ...

    Re: Business And Management
    A message posted at WOODWEB's Business and Management Forum (11/21) -- read the archives here. this subject is brought up every six months or so and ...

    Flat Line vs. Conventional
    A message posted at WOODWEB's Finishing Forum (11/21) -- I'm helping a friend here who apparently thinks highly enough of my traditional/conventional ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/21) -- This is the response from Paul Pat Gilbert Paul I asked this question on the w ...

    Re: Leather top table
    A message posted at WOODWEB's Finishing Forum (10/21) -- Gotta love the Woodweb knowledge base. A great starting point. https://www.woodweb.com/knowl ...

    Re: air compressor
    A message posted at WOODWEB's Business and Management Forum (2/21) -- I don't know that there is a bad one. They last forever. Don't waste your money ...

    Re: Edgeing doors and fronts
    A message posted at WOODWEB's Cabinetmaking Forum (1/21) -- No lost forefinger and thumb in a tablesaw kick back accident. Thumb was reattached but l ...

    mystery finish problems/questions
    A message posted at WOODWEB's Finishing Forum (1/21) -- we have a countertop that we finished in october for a clients beach/vacation house. we did t ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/20) -- We have been bidding by the foot for years and our system is very accurate. We have a ba ...

    Re: CNC equipment advise
    A message posted at WOODWEB's CNC Forum (9/20) -- No, he is running his businesses in Cartersville GA, US Routertools.com and the Black box vacuum ev ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/20) -- The Woodweb is supposed to be for industry proffesionals. That's how it is put to you ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/20) -- About ten years ago there was a lot of discussion on this forum about Lean Manu ...

    Re: Rubbing out a lacquer finish
    A message posted at WOODWEB's Finishing Forum (5/20/25) -- ???...that was an opinion, my opinion on polishing any or all surfaces...it sure wasn't a ...

    Re: Helpful tips to speed up Production
    A message posted at WOODWEB's Finishing Forum (1/20) -- Jason, Your heart is in the right place but your mind hasn't caught up yet. We simply do not ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/19) -- There was recently an article about a company manufacturing cross laminated ...

    Re: Steel City Jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- At the top of this page (at least on my computer...) is an ad/link for WKW - Wisc ...

    Re: Pro or DIY
    A message posted at WOODWEB's Business and Management Forum (10/19) -- Not all the advertising here is from woodweb. Some of it looks to be google dr ...

    Re: Pro or DIY
    A message posted at WOODWEB's Business and Management Forum (10/19) -- Dan, you're conflicted and exposed. The HD ads have nothing to do with woodweb ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/19) -- I've been working with wood since I was a young man. I was there when the fir ...

    Re: Exterior use of Sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (5/19/22) -- FORUM GUIDELINES: Please review the guidelines below before posting at WOO ...

    Re: Wrapping a cone
    A message posted at WOODWEB's Architectural Woodworking Forum (5/19) -- http://www.woodweb.com/knowledge_base/Wrapping_a_cone_with_laminate.html /www ...

    finish outsourcing shop
    A message posted at WOODWEB's Finishing Forum (5/19) -- hi i saw recently on woodweb a company that finishes for other shops in nj. i dont see it any ...

    Re: Balusters angle cut
    A message posted at WOODWEB's Architectural Woodworking Forum (3/19/23) -- Matt, I don't know how to send this type of a file on woodweb. Customer se ...

    No response from CR Onsrud about installation of 24vdc led light bar
    A message posted at WOODWEB's CNC Forum (2/19/24) -- I have contacted CR Onsrud on 1/22, 1/23 and then again on 1/29. about the install of their led ...

    Re: Live edge walnut in SC
    A message posted at WOODWEB's Furniture Making Forum (9/18) -- WOODWEB has a resource available that may help you in your search. Our *Sawing and Dry ...

    Re: HELP: Picking a 12" Jointer in Canada
    A message posted at WOODWEB's Cabinetmaking Forum (6/18) -- You could always search here on woodweb ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Joel, I'll mention once again. WoodWeb is a Professional Forum. We don't tolerate people who ...

    Re: parts for omal c pneumatic hinge borer
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Thanks Dennis, as always, we on woodweb can count on you. Harold ...

    Re: Water based finish on natural red oak
    A message posted at WOODWEB's Finishing Forum (11/17) -- Gary,...I'd be looking over the shoulder for a year or so until this public announcement on ...

    Re: thoughts about choosing a cad program
    A message posted at WOODWEB's CAD Forum (6/17) -- Easy to learn and use basic and limited functionality Now, don't confuse the formula above to indic ...

    Re: oil spice pullout
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I have bought base pullouts and I have built pullouts. Sometimes when you build these the ...

    Re: Distributors of Panel Mounting Hardware
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- You may want to look at WOODWEB's Product Directory, under Hardware & ...

    Re: I must be a total duh!
    A message posted at WOODWEB's CNC Forum (1/17) -- Hey thanks for the information. I guess my frustration is all based on computer hardware and softwa ...

    Re: I must be a total duh!
    A message posted at WOODWEB's CNC Forum (1/17) -- I think it is more a case of attitude over aptitude. When I bought my CNC I had spent more than a d ...

    Re: curved stair handail questions for professionals
    A message posted at WOODWEB's Architectural Woodworking Forum (11/16) -- Hi to Jim and Dave esp. Love the tread ( pun intended) and thanks for the pa ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/16) -- bill - what machine do you have and what thickness and length lumber are you typically g ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/16) -- Tim was one of. My best friends. I've known him for 30+ years. He built my 1st kitchen, t ...

    Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/16) -- Ive only been in business for about a year and a half. Im a one man operation l ...

    New at WOODWEB: A "My Favorites" Page for Members
    A message posted at vawp (12/31) -- In an ongoing effort to make improvements to the site WOODWEB has added a new My Favorites feature The My Favorit ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/15/21) -- I too love the West System 105 epoxy. As a Michigander, it’s better brand than a Ford any ...

    Re: Need Help with 2014 SCM Pratix S15 Handheld Controller
    A message posted at WOODWEB's CNC Forum (12/15) -- And I thought I was the only person with an axe to grind against SCM. The more I hear, the more I ...

    Anyone Know Of Directory To Find NY Area Installation Professionals?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/15) -- Hello, I have a potential commercial millwork job coming up in Westch ...

    Re: Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (8/15) -- I have had machines sell within hours of posting here on woodweb. It's the best ...

    Re: Honest Money Answers Please
    A message posted at WOODWEB's Business and Management Forum (7/15) -- You are more than Welcome to visit my shop. I am in Columbia SC and it makes my ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- That is an interesting article. I'm not sure that the test results pertain to your bench p ...

    Re: Woodworking and Cabinet shows
    A message posted at WOODWEB's Business and Management Forum (2/15) -- I was nervous about paying for the cabinet makers association at first thinking ...

    finishing high moisture content wood
    A message posted at WOODWEB's Finishing Forum (1/15) -- i have been asked to quote all the bar top, table top, and bench top finishes in a new bar. a ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/14) -- However many responses you get to this that is how many different answers you will get. Even ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/14) -- Adam...learning from...?? lol im self taught. ill learn this same way i learned to make cabi ...

    Re: GIBEN bander parts and service
    A message posted at WOODWEB's Cabinetmaking Forum (9/14) -- I would like to thank Woodweb for not having pulled this post. Obviously it lead to a res ...

    Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/14) -- Looking for the cabinet maker in Maine who does kitchen cabinetry and paints with oil bas ...

    Re: Job calendar/workflow/schedules
    A message posted at WOODWEB's Business and Management Forum (8/14) -- As you grow, your manual systems become more difficult and expensive (because y ...

    Re: Cure time for waterborne finishes
    A message posted at WOODWEB's Finishing Forum (2/14) -- I have a one man custom finish shop. I spray both water borne and solvent borne finishes. Jus ...

    Re: edge bander not turning on
    A message posted at WOODWEB's Business and Management Forum (2/14) -- You are going to have to open the cover below the glue pot and below the trimme ...

    Re: Best way to preserve freshly cut boards for outdoor use
    A message posted at WOODWEB's Sawing and Drying Forum (1/14) -- A time long past I cut bevel siding and nail it green to wall; At the time I consider ...

    New to this
    A message posted at WOODWEB's Finishing Forum (10/13) -- Greetings. Please Help! I am a finish carpenter and cabinet maker. I work for a small custom ...

    Re: Jon Elvrum
    A message posted at WOODWEB's Cabinetmaking Forum (6/13/24) -- Jon was a 'forum technical advisor' on Woodweb some 20 years ago. A lot of his forum p ...

    Re: Profit Margin
    A message posted at WOODWEB's Business and Management Forum (3/13) -- David there's a way to spin woodweb straw into gold. Imagine a Bates Motel type ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/13) -- thanks again everybody. the picture i have of the entire job is too large for ...

    Re: Veneer crack
    A message posted at WOODWEB's Finishing Forum (2/13) -- Rich beat me to it. See http://www.woodweb.com/knowledge_base/Contact_Cement_Failure_with_Ven ...

    Re: First cnc (hopefully)
    A message posted at WOODWEB's CNC Forum (2/13) -- Got to IWF 2016 in Atlanta in August. It is a very cheap educational experience. Most of the bigger ...

    Re: Star Hanger systems
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/12/22) -- Do a search for Star hangers on the woodweb search and you will ge ...

    Re: Thermwood cut center
    A message posted at WOODWEB's CAD Forum (8/12) -- The "Andy Patel" (or whoever is posting under that name) posting above can also be found ...

    Re: First big several month long gig for a longtime millwork shop.
    A message posted at WOODWEB's Business and Management Forum (4/12) -- Larry, Mel started this thread as a discussion of Lean. It didn't get hijacked. ...

    prefered beading system windows and doors
    A message posted at WOODWEB's WOODnetWORK Forum (8/11) -- Hello Forum Not sure if this is the best forum to post my question preferred bottom beading ...

    Hi everyone. Happy New Year !
    A message posted at WOODWEB's Architectural Woodworking Forum (1/11/23) -- If Woodweb had an "off topic" forum, like the MGB forum that I r ...

    Re: Band Saw Guide Bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10) -- carter guides - only also search woodweb for video of adjustment, this guy is gre ...

    New Employee
    A message posted at WOODWEB's Business and Management Forum (8/10) -- I am looking for a safety agreement document for new employees. I have searched ...

    Successful Pricing Methd
    A message posted at WOODWEB's Cabinetmaking Forum (6/10) -- Hello all, Well, after 12 years of having a cabinet job, I am ready to build a cabinet ma ...

    Audio versions of Woodweb Articles?
    A message posted at WOODWEB's WOODnetWORK Forum (4/10/24) -- Hi all, We at Woodweb are experimenting with making some archived articles (from forum d ...

    Re: How do you size cabinet doors?
    A message posted at WOODWEB's Cabinetmaking Forum (3/10) -- Frank, I just read about a technique another guy uses in the comments above yours. They j ...

    Re: Time to upgrade dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/10) -- Hi Dale, I saw your post, we used an Al-KO brand indoor unit, a m ...

    A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- A suggestion for the WoodWeb staff. I read your articles almost daily when startin ...

    Re: Cabinet Face Frame Assembly
    A message posted at WOODWEB's Cabinetmaking Forum (12/9/21) -- BTW as one who has had a Hoffman I would not recommend it for faceframes. Twice as muc ...

    Re: Longest Lasting Exterior Crucifix Hardwood
    A message posted at WOODWEB's Furniture Making Forum (2/9/22) -- RichC, You are absolutely right but I wanted to check with this woodweb because even ...

    Re: Cabinet door production time
    A message posted at WOODWEB's Architectural Woodworking Forum (2/9) -- This thread got me curious how long it actually takes to build a cabinet door, ...

    Re: drawer slide storage
    A message posted at WOODWEB's Business and Management Forum (1/9) -- I am going to get back to this topic of lean in a minute. I hope to coax some in ...

    Re: Dining table and bar top - solid vs veneer
    A message posted at WOODWEB's Furniture Making Forum (11/8) -- okay I think I've finally got it. I agree with you Mark and Keith with regards to the ...

    Re: Lean Manufacturing article in Woodshop News
    A message posted at WOODWEB's Business and Management Forum (4/8) -- I know I'm going to catch it over this set of observations, especially from Pat. ...

    Lean Manufacturing article in Woodshop News
    A message posted at WOODWEB's Business and Management Forum (4/8) -- The current edition of Woodshed News Magazine has an excellent article about lea ...

    Re: Looking for doors and drawers source
    A message posted at WOODWEB's Business and Management Forum (3/8) -- Using the woodweb as a survey finding a niche is key. e.g. closets, conference t ...

    Replicating wood carvings on cnc
    A message posted at WOODWEB's CNC Forum (1/8) -- Hey everyone , I'm looking to the woodweb community for some technical guidance . I have about 20 of ...

    Re: Tigerfence alternatives
    A message posted at WOODWEB's Cabinetmaking Forum (7/7) -- Razor gauge does not make a rip fence unit,,I have tigerstops on both my sliders and my 14 ...

    Re: Dimension Drawings
    A message posted at WOODWEB's Cabinetmaking Forum (5/7) -- Sorry to have to bring up the Website, I am glad you responded, Most all of Us here are a ...

    Selling equipment
    A message posted at WOODWEB's Business and Management Forum (5/7) -- I am looking to sell off some of my equipment and was curious as to where, other ...

    Re: cnc resistance
    A message posted at WOODWEB's Business and Management Forum (3/7) -- Look up some of the posts on the woodweb about what affect CNC had on their busi ...

    WOODWEB Anniversary Poll - 20 years of service
    A message posted at WOODWEB's Solid Wood Machining Forum (1/7) -- 2015 represents the 20th year that WOODWEB has been in service, and we're intereste ...

    WOODWEB Anniversary Poll - 20 years of service
    A message posted at WOODWEB's Sawing and Drying Forum (1/7) -- 2015 represents the 20th year that WOODWEB has been in service, and we're interested i ...

    WOODWEB Anniversary Poll - 20 years of service
    A message posted at WOODWEB's CNC Forum (1/7) -- 2015 represents the 20th year that WOODWEB has been in service, and we're interested in finding out ...

    Re: Reclaimed Fence Boards on Plywood
    A message posted at WOODWEB's Furniture Making Forum (12/6) -- I went to a local college with a great woodworking program, loved it, and have been bu ...

    were can i buy a chainsaw mill which cuts 65 inches or 72 inches
    A message posted at WOODWEB's Sawing and Drying Forum (9/6) -- i saw on one thread here on woodweb a man who showed pictures and said he could cut a ...

    Thermally treated hardwood
    A message posted at WOODWEB's Cabinetmaking Forum (8/6) -- Do any of you woodwebers have any experience with using heat treated lumber such as Cambia ...

    Re: Interesting read about the future of housing
    A message posted at WOODWEB's Business and Management Forum (6/6) -- Pat, Remember few things. Those graphs are: 1) made by people who have an agenda ...

    Re: Anyone starting a new business??
    A message posted at WOODWEB's Business and Management Forum (4/6) -- Figure out what business you are in, e.g. the car business and the motorcycle bu ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/6) -- Mel, I rarely post on the woodweb. Maybe once or twice a year. Tend to find peop ...

    Re: Many ?? About Buying a Used CNC
    A message posted at WOODWEB's CNC Forum (10/5) -- 2. I've used riggers before, not cheap but did fine. 3.Damage: check with the rigger. In transit. T ...

    Fanuc Pendant 0i-plus [2024 Cr Onsrud Router]
    A message posted at WOODWEB's CNC Forum (7/5/24) -- Howdy woodweb! We have 2024 CR Onsrud cnc router we purchased fall of last year and our most rece ...

    Re: Cumaru stairs
    A message posted at WOODWEB's Solid Wood Machining Forum (5/5) -- Thanks so much for replying. Actually, both photos are the same with a 3 month diff ...

    Material or treatment advice for outdoor furniture??
    A message posted at WOODWEB's Furniture Making Forum (4/5) -- I have recently been commissioned to build a hundred plus units of children's picnic ta ...

    Re: Seeking Finisher In Atlanta Area Who Uses A Kremlin 20:25 Pump
    A message posted at WOODWEB's Finishing Forum (4/5) -- Hey Shane, I sent you an email through woodweb. Just let me know if you don't receive it. Than ...

    Re: Metal working in a wood shop
    A message posted at WOODWEB's Business and Management Forum (11/4) -- I got into metalwork a little over a year ago and love it! I have a separate sh ...

    Re: Need to find a wood source
    A message posted at WOODWEB's WOODnetWORK Forum (10/4) -- Christopher, A couple of suggestions - you could post this as a "Wanted to Buy" a ...

    Re: Industry Standards?
    A message posted at WOODWEB's Cabinetmaking Forum (8/4) -- Adam B, Part of a "shop manager's" job is to always portray the shop well. The O ...

    Re: Breaking into Design
    A message posted at WOODWEB's CAD Forum (10/3) -- Andrew, under the nkba.org go to 'kitchen and bath courses' on the right. Then it goes into the nkb ...

    Re: Shop Test for Job Applicants
    A message posted at WOODWEB's Business and Management Forum (9/3) -- These are great... thank you so much! I am fascinated by these as I have a dedic ...

    Re: Moulding pricing
    A message posted at WOODWEB's Business and Management Forum (4/3) -- So I currently take finished size and add 35% for waste for most woods. Some kno ...

    Biesse Akron vs Cehisa Flexy P
    A message posted at WOODWEB's Cabinetmaking Forum (3/3/25) -- Comparing the edgebander that everyone seems to have (in my area) the Biesse Akron to a ...

    Re: infrared lamps
    A message posted at WOODWEB's Finishing Forum (1/3/22) -- Dave, I sent you a message via woodweb, might be in your email spam ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/2) -- WOODWEB is interested in finding out how professional woodworkers ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CA ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Furniture Making Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their bus ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Solid Wood Machining Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Adhesives Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their business o ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's WOODnetWORK Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their business ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Veneer Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their business oper ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's CNC Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their business operati ...

    Re: operating system for SCM
    A message posted at WOODWEB's CAD Forum (11/2) -- Read up on woodweb and the software you name and the frustration of others, before you decide. @ on ...

    Re: Panel movement?????
    A message posted at WOODWEB's Architectural Woodworking Forum (7/2) -- Sorry Adam, I can't let your comment on exponential wood movement go unchallen ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (5/2) -- I find it interesting that 2 of the woodweb's more successful businessmen are de ...

    Re: Thinking about upgrading router
    A message posted at WOODWEB's CNC Forum (2/2) -- Evan I have a Freedom Machine Tool 5 X 10 router with ATC with 10 positions. They are a subsidiary o ...

    Events and marketing casework design/production solution
    A message posted at WOODWEB's CAD Forum (11/1) -- Hello everyone, It has been a while since I have participated on woodweb. I am wondering if there a ...

    Re: Can I use carpenters glue on my MDF shelves?
    A message posted at WOODWEB's Furniture Making Forum (9/1/22) -- FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Int ...

    fabricating 'standard' handrail fittings
    A message posted at WOODWEB's Architectural Woodworking Forum (8/1) -- I finally recently opened my own shop, and as life does, it has thrown me into ...

    Re: New Cnc company
    A message posted at WOODWEB's CNC Forum (8/1) -- Jim, It's good to see you active on woodweb. I came out a few years ago to help you with the alignme ...

    Re: kem-aqua plus vs. lemmar duralaq (clear)
    A message posted at WOODWEB's Finishing Forum (5/1) -- guys - this is incredibly helpful, thanks. enduro clear poly is my absolute favorite clear. i ...

    Re: Cement board mantle
    A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- Tony, That is a great idea and I wish I'd thought of it. I went to the site ...

    Re: Scaling High-end Residential Custom Shop
    A message posted at WOODWEB's Business and Management Forum (12/31) -- cabmaker, You are referencing another post. In that post I used only your info ...

    Re: Crown on vaulted ceilings
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- ML, honestly I'm not nearly as snobbish or impractical as I may soun ...

    Re: So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/31) -- I have done reasonably well in all relationships and subjects when i remember ...

    Re: chairs
    A message posted at WOODWEB's Furniture Making Forum (10/31) -- See this forum post. http://www.woodweb.com/forum_fdse_files/furniture/805940.html I ...

    Re: Automotive finish on wood
    A message posted at WOODWEB's Finishing Forum (8/31/21) -- Matt, thanks for the response. I am thinking about this the same way you are. The reason f ...

    Project Shipping to Costa Rica
    A message posted at WOODWEB's Adhesives Forum (5/31) -- I am in the process of bidding a project that will be shipped to Costa Rica when complete. It ...

    Re: cracking in Santos veneer before and after polishing
    A message posted at WOODWEB's Veneer Forum (5/31) -- Deepak - your image does not appear. If you can send it to me by email to webmaster@woodweb.com, ...

    Labor shortages: How to fix
    A message posted at WOODWEB's Business and Management Forum (3/31) -- The Woodweb has had a lot of articles in the last year about a shortage of cabi ...

    Re: My dilemma....
    A message posted at WOODWEB's Business and Management Forum (3/31) -- Mind your own business. What people do after hours in their private office is n ...

    Re: Should Wood Crosscuts from Stumps Be Sealed
    A message posted at WOODWEB's Sawing and Drying Forum (1/31/22) -- Post where you like, you will still hear this is a bad idea. Wood shrinks as it dr ...

    Re: Private Label Manufacturing?
    A message posted at WOODWEB's Business and Management Forum (1/31) -- Anticipated volume, I don't know it could be a big bust? I'll probably know wit ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/31) -- We often try things that sound unachievable with wood. If the Woodweb guys knew half of the s ...

    Re: Profit Margin Rant
    A message posted at WOODWEB's Business and Management Forum (1/31) -- Has anyone on Woodweb thought what it would be like to have Marcus come to your ...

    Re: How to a 25 x 156 edge grain counter top
    A message posted at WOODWEB's Furniture Making Forum (1/31) -- Love this approach..."they will go back and mate perfectly. Sand carefully, and y ...

    Re: Gift Shop Sign
    A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Paul - this would be an excellent addition to WOODWEB's Project Gallery - please ...

    Re: Scaling High-end Residential Custom Shop
    A message posted at WOODWEB's Business and Management Forum (12/30) -- Please read all of the following through this lense: I think David is if not t ...

    Re: Mechanical glue spreader
    A message posted at WOODWEB's Adhesives Forum (10/30) -- Hi Dave, You may want to have a look at the Lamello LK glue systems. They've been around for ...

    Re: Unlicensed Contractors
    A message posted at WOODWEB's Business and Management Forum (10/30) -- Randy Stone: I feel your pain. Part of the charm of the Woodweb is that it all ...

    Re: Freelance SketchUp Guru needed!
    A message posted at WOODWEB's CAD Forum (9/30) -- This can be posted at WOODWEB's Job Exchange - just click on the link below. ...

    Re: Furniture Beetle?
    A message posted at WOODWEB's Furniture Making Forum (9/30) -- Ash is known to harbor beetle that hatch from the larval stage if not heated enough in ...

    Re: Old growth Cherry, possible value?
    A message posted at WOODWEB's Sawing and Drying Forum (8/30) -- WOODWEB offers a spot to advertise all types of lumber and lumber products for sale - ...

    Re: Paul Downs Book
    A message posted at WOODWEB's Business and Management Forum (8/30) -- Paul, I finally had time to finish your book. It was a great read, and like you ...

    Re: sand paper
    A message posted at WOODWEB's Finishing Forum (7/30) -- If you are having trouble finding a good source, we stock the Mirka Abranet as well as the Mi ...

    Re: Wood web on an iPad
    A message posted at WOODWEB's Cabinetmaking Forum (6/30) -- I access Woodweb on a 27 inch desktop. As I recall, it used to be you could scroll throug ...

    Wide Heavy Doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/30) -- Hey WoodWeb, We have a project that calls for 40+ inch wide cabinet doors that are quite ...

    Re: Electric Appliance Lift
    A message posted at WOODWEB's Furniture Making Forum (3/30) -- If any of you that contributed to this forum are interested I did complete this unit a ...

    Re: Looking for photo of a project posted a couple years ago
    A message posted at WOODWEB's Architectural Woodworking Forum (3/30) -- I think that might have been my post. you can find it here http://www.woodweb ...

    Help NJ Woodworkers Kalle Fauset and Thom Hucker
    A message posted at WOODWEB's Business and Management Forum (12/29/21) -- Hey WOODWEBers -- Two woodworkers who don't frequent this site but are impo ...

    Re: Insert tooling fitment problem
    A message posted at WOODWEB's Cabinetmaking Forum (12/29) -- Bruce, yes these are insert tooling cutters. Each head has three cutters (all the same c ...

    Need advice on undermounts
    A message posted at WOODWEB's Cabinetmaking Forum (12/29) -- Hi All I am probably the last cabinetmaker on the planet to switch to under mount drawer ...

    Re: OTT Atlantic Edgebander Technician?
    A message posted at WOODWEB's WOODnetWORK Forum (11/29) -- Calvin, Woodweb doesn't show me the year you posted this, only the month and date. Hopeful ...

    Re: Customer claiming termites
    A message posted at WOODWEB's Business and Management Forum (11/29) -- As mentioned, it's happened before. http://www.woodweb.com/knowledge_base/Powd ...

    Re: So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/29) -- Sorry not what you want to hear but... We are at all time sales records, with ...

    So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/29) -- Our business has slacked to where we have only a week or two's work out in fro ...

    Re: Engineering Club
    A message posted at WOODWEB's CAD Forum (9/29) -- I'd like to discuss outsourcer providers and their quality. Ways people are scripting around variou ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/29) -- David, In best practice one should try to remove the oil from teak before glueing. It doesn't ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/29/21) -- Wrote a lot of change orders that were accepted thanks to Alan. I was hoping ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/29/21) -- He always had a great business minded response to whatever questions were as ...

    Cheapest way to collect dust and shavings from small cabinet shop
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/29) -- We have a very small cabinet shop with a few employees. We curren ...

    Biesse B4 Router bellows
    A message posted at WOODWEB's CNC Forum (8/29) -- I am knew to Woodweb and work in the Maintenance Department. I have not found any Maintenance speci ...

    Re: Microvellum XML Files
    A message posted at WOODWEB's CAD Forum (7/29/25) -- P.S. reason I say that is because it is attempting to mimic the human being and not disclosing t ...

    Re: How the heck can I give pricing?
    A message posted at WOODWEB's Business and Management Forum (6/29) -- Also, and this is the trainer in me talking, since Woodweb is an international ...

    Re: Sales Slump/Tire Kicker Blues -- What Gives?
    A message posted at WOODWEB's Cabinetmaking Forum (6/29) -- Read this post this morning and said to myself, "Ah hell, they never listen anyway s ...

    Re: Rotting cedar
    A message posted at WOODWEB's Architectural Woodworking Forum (6/29) -- BH, I totally agree with you about the PT posts. The other location of rot wa ...

    Looking for machine knowledge -Biesse Levia 320 - D
    A message posted at WOODWEB's Cabinetmaking Forum (3/29) -- Hey Everyone - I am very interested in buying a used 2007 43" Biesse Levia 320 doubl ...

    Re: Newbie In Over My Head
    A message posted at WOODWEB's Sawing and Drying Forum (1/29) -- DRYING HARDWOOD LUMBER is available in the archives here at WoodWeb. ...

    Re: best splitter etc for powermatic 66 saw,
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/29) -- Jeff, you're absolutely right - if a splitter was causing problems yo ...

    Re: Drying Pine
    A message posted at WOODWEB's Sawing and Drying Forum (1/29) -- Dca you check the info on temperature, humidity and velocity in DRYING HARDWOOD LUMBE ...

    Re: Outboard Fence
    A message posted at WOODWEB's Architectural Woodworking Forum (12/28) -- I like B H Davis' suggestion so far with the fixed alignment pins. In my exp ...

    Re: Wood identification
    A message posted at WOODWEB's Architectural Woodworking Forum (8/28) -- BH, I was taught by my wise old woodworking master that: Its costs an extra 1 ...

    Re: CNT Motion Series 1000 CNC Router
    A message posted at WOODWEB's CNC Forum (7/28) -- Chad, I would like to post your response to my posting, and my reply seen below, on Woodweb. I know ...

    Re: CNT Motion Series 1000 CNC Router
    A message posted at WOODWEB's CNC Forum (7/28) -- CMI, I would like to post your message and my reply on Woodweb. You responded: “Call Paul at CNT we ...

    Re: Where do you learn about wood railing fabrication etc?
    A message posted at WOODWEB's Architectural Woodworking Forum (7/28) -- There are no schools that I know of that teach stair making or trimming. It i ...

    Re: a job for a 60 years old estimator
    A message posted at WOODWEB's Business and Management Forum (6/28/22) -- https://woodweb.com/cgi-bin/forums/business.pl?read 860077#860077 ...

    Re: drying wood in a hot box
    A message posted at WOODWEB's Sawing and Drying Forum (6/28) -- The humidity determines the final MC. Do you need 4% MC final (which does seem dry as ...

    Re: Scientific Management of High-Variety, Complex Production
    A message posted at WOODWEB's Business and Management Forum (6/28) -- Prasad -- I am looking forward to sitting down with your article for a careful ...

    Re: Surrounded by extra edgebanding
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/28) -- You may want to consider a listing at our Classifieds Exchange ... this ...

    Re: 2024-2025 Cabinet installer pricing
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/28/25) -- This aligns with some regional rates but is on the lower end. In C ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/28/25) -- I do not think a vacuum press will be sufficient to ensure a flat pressing. I would look f ...

    Re: Portable mill for hire in Toronto area
    A message posted at WOODWEB's Sawing and Drying Forum (5/28) -- Be sure to check out WOODWEB's Sawing and Drying Directory - you may be able to find ...

    Re: biesse rover 15 z axes origin of table set up
    A message posted at WOODWEB's CNC Forum (3/28) -- We have recently become aware that an individual, a former Biesse America employee, is obtaining co ...

    Re: biesseworks
    A message posted at WOODWEB's CAD Forum (3/28) -- We have recently become aware that an individual, a former Biesse America employee, is obtaining co ...

    Re: Using air dried wood and warping
    A message posted at WOODWEB's Furniture Making Forum (3/28) -- Woodweb is an underappreciated resource for such a wide range of topics, so much knowl ...

    Fumed oak fading in light. Any source that confirms this is normal?
    A message posted at WOODWEB's Finishing Forum (2/28) -- We "fumed" a white oak floor (wiped on industrial cleaning ammonia ~8%, worked perf ...

    Re: Table tops from Stump Cross Cut Sections
    A message posted at WOODWEB's Furniture Making Forum (1/28/22) -- I'm curious why you are getting conflicting information, it's a miracle if a cookie ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/28) -- Justin It is called SWOT. It is a known and accepted tool used by business and ...

    Trying to find this knob
    A message posted at WOODWEB's Cabinetmaking Forum (1/28) -- Woodweb community, Does anyone know where I can find this (exact) knob It's about 7/8&quo ...

    Re: Scammer on Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (12/27/22) -- I have found that dealing with other woodworkers is always trustworthy. Mos ...

    Re: Cross laminated timber
    A message posted at WOODWEB's Architectural Woodworking Forum (12/27) -- This was discussed a bit in a thread here on Woodweb in September of this ye ...

    Re: Curly Maple Top
    A message posted at WOODWEB's Furniture Making Forum (9/27) -- I asked the question because the OP is concerned about the board 'bowing' - apparently ...

    Re: lamello zeta machine and hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/27) -- I can buy it laid up or in veneer form and was looking for a way to avoid gluing all the ...

    Surrounded by extra edgebanding
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/27) -- I recently finished making cabinets for a large job that called for 8 or ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- Jonathan: It sounds like you are making one frame and not multiples, so "jigging ...

    Bubbles in cured waterborne finish
    A message posted at WOODWEB's Finishing Forum (4/27/25) -- I take on one or two commissioned projects a year for cabinet or furniture work. I struggl ...

    Re: Help! My draftsman is leaving!
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I wood start looking on Woodweb and expand your search; ask your CV salesman if ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- For some reason it didn't include the original Wood Web link in my last post. http ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Please see the posts in a related topic herehttp://www.woodweb.com/cgi-bin/forums/ ...

    Re: Grizzly G0525
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/27) -- Yes. Several of them advertise here on Woodweb. Take a look aroun ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Don't forget WOODWEB's Job Exchange - you can post an "Offering Employment ...

    Re: Pre-dryer???
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- With oak, maybe ten feet per minute--almost zero--when the wood is above 35% MC. With ...

    pattern matching with photo
    A message posted at WOODWEB's Veneer Forum (1/27) -- . What I want to do is take a photo of veneer and the manipulate it on screen to make different ...

    Re: My first solo project : a wooden bar ! (ash olive tree)
    A message posted at WOODWEB's Furniture Making Forum (12/26/22) -- le bolay furniture, don't let jerk off assholes like the dickhead richc tear you d ...

    Re: My first solo project : a wooden bar ! (ash olive tree)
    A message posted at WOODWEB's Furniture Making Forum (12/26/22) -- Hey richc you're the biggest asshole on the Woodweb. Go eff yourself. Absolutely a ...

    Holiday Greetings
    A message posted at WOODWEB's Business and Management Forum (12/26) -- Just wanted to extend sincere greetings in honor of whatever end-of-year holid ...

    Re: Western Red Cedar Solvent Soluble Extractives??
    A message posted at WOODWEB's Finishing Forum (10/26) -- This is a good one for Gene Wengert to look at. He is the guru of wood knowledge. Also he ha ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/26) -- As everyone knows on the Woodweb I rarely talk about economics. Suffice it to say this is another ...

    Re: Sellers beware!
    A message posted at WOODWEB's Business and Management Forum (9/26/24) -- Hi all, This is a good reminder for sellers (on this site or elsewhere). Her ...

    Re: Source to outsource shop drawings
    A message posted at WOODWEB's CAD Forum (8/26) -- James, how are you doing a search on Woodweb? I find nothing specific. - resources/general resource ...

    Re: slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- Fred - if you are having problems adding your pictures, you can send them to me vi ...

    Re: Wood Finishing
    A message posted at WOODWEB's Finishing Forum (6/26) -- Of course Flexner's book on woodfinishing is amazing. But you said for polishing, do you mean ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- I think it was Kerry Fullerton who posted a link to a plan for one. I ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Paul, yes, you can go ahead and post an announcement when the book is available ...

    Re: finishing advice for vanity top
    A message posted at WOODWEB's Finishing Forum (3/26) -- If we doesn't mean your professional shop bathroom, you might want to read the guidelines. WO ...

    Re: installation crew NYC
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/26) -- Jake - You can look over the listings on WOODWEB's Job Exchange - the ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/26) -- Pat, Just because this is a bleak outlook does not necessarily make it a " ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/25) -- http://www.woodweb.com/cgi-bin/forums/cabinetmaking.pl?read 814783 ...

    Re: What is the best planer?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/25) -- Look at the older Newman-Whitney top and bottom planers. One pass and you are rea ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/25) -- Backstory, I worked for DJS as young man in my early 20's and I learned enough ...

    Re: Does gang ripping make straight boards?
    A message posted at WOODWEB's Cabinetmaking Forum (8/25) -- Here is what I used to make straight blanks to run through my moulder. The sawmill I boug ...

    Help Want Adds
    A message posted at WOODWEB's Business and Management Forum (7/25) -- Besides Craigslist and Woodweb. What are some good sources for posting help wan ...

    Re: Selling my business
    A message posted at WOODWEB's Business and Management Forum (6/25/24) -- Woodweb has a Classifieds area to sell businesses. You could try posting the ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- @JWS: book is on its way, publication date is August 4th. If the mods here will ...

    Re: Springback Formula For Arched Jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- Gary, I apologize for the delay in seeing this thread. Now that I'm retired I ...

    Best Horizontal Band Re-Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Hello Woodweb, Long time reader, first time posting. I'm looking for insight on pu ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Here is a copy of pp. 101-102. http://www.woodweb.com/knowledge_base/Techniques_fo ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Here is a link at WoodWeb about equalizing and conditioning lumber ...

    Re: First Big Wall-art: residual questions
    A message posted at WOODWEB's Finishing Forum (2/25) -- Thicker woods can be reasawn into two thinner boards at times. Often this is common practice. ...

    Re: Staining on white oak lumber
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/23) -- This appears to be sticker stain. Here is an article explaining its cause. https:/ ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/25) -- The facts (which may be "alternate facts") as I see them after workin ...

    Re: CNC ROUTER Recommendation
    A message posted at WOODWEB's CNC Forum (12/24/24) -- Just a heads up as to why you aren't getting replies to your CNC router inquiry. Woodweb is a c ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (12/24) -- While I rarely post on Woodweb this is always an interesting question, What I ...

    Alphacam Post Processor
    A message posted at WOODWEB's CAD Forum (11/24) -- I am looking for an Alphacam post processor for and Omnitech Pal 5' x 10' CNC Router router has a ...

    Re: Help! Keep getting dark grain when staining white oak
    A message posted at WOODWEB's Finishing Forum (10/24/23) -- Per line one of the forum guidelines; WOODWEB is a professional industrial woodworking si ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Just wanted to jump in here quickly to mention that we have many customers using our Lam ...

    Re: Board Calculator
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24/25) -- Here is a thread on the subject. https://www.woodweb.com/knowledge_base/Lumber_ ...

    Re: RE: Old Wood Veneer
    A message posted at WOODWEB's Veneer Forum (9/24) -- There are rules, then there are rules. So, if 1/4" is to be thought of as solid wood, then ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/24) -- Established: 1. The weekend-warrior-router-man-with-a-two-car-garage-and-a-wife-with-a ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- I’m astounded that small business owners look at a chart from one of the big si ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- I figured out why it takes you 53 weeks to pay your bills, you have no employee ...

    Re: SCM Accord 25fx won't turn on
    A message posted at WOODWEB's CNC Forum (8/24) -- https://www.woodweb.com/cgi-bin/forums/cnc.pl?read 835805 ...

    Re: Large adjustable shelf span
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24/25) -- Leo G- yes, I'd reluctantly mentioned that as option 3 but now am leaning ...

    Re: Wall mounted vanity
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Thank you all for your comments and suggestions-much appreciated. Love the Woodweb Jr ...

    Re: cruisers
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- Jon, have you tried posting on the Forestry forum part of Woodweb? You might get a be ...

    Re: Storing AAA pump
    A message posted at WOODWEB's Finishing Forum (5/24) -- Hi. Do this.... search Woodweb using "Acrastrip" or "Acrastrip 600". You ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Just an FYI - you can post a Business for Sale listing at WOODWEB's Classified ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Hi Cabman is this a trap?? OK i'm going for it cellphone and the wifes (wifes f ...

    Felder Pods
    A message posted at WOODWEB's CNC Forum (5/24) -- Does anyone have access to vacuum pods for a Felder H08 or H10 CNC machine? We have been trying to ...

    Re: Exterior screen doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- We've been using Sapele on a regular basis for about 10 years. I've yet to ha ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Paul - I understand your point about the CNC. If you like to do it that way, ...

    Re: Homemade blade sharpener from a chainsaw sharpener
    A message posted at WOODWEB's Sawing and Drying Forum (4/24) -- Go to this link in knowledge base.. http://www.woodweb.com/knowledge_base/ShopBuilt_B ...

    Re: Just wanted to say hey, I'm new to the group
    A message posted at WOODWEB's Cabinetmaking Forum (3/24) -- I am new on this site as well.. what a resource Woodweb is! Being relatively new to fine ...

    Re: Just wanted to say hey, I'm new to the group
    A message posted at WOODWEB's Cabinetmaking Forum (3/24) -- Nice work ! Woodweb has been a tool in my box a good while, pick the topics you want to f ...

    Re: First Big Wall-art: it cupped...
    A message posted at WOODWEB's Finishing Forum (2/24) -- What day is this? The 24th? Gak. I apologize, but you'd be proud of me: I was readin. Based o ...

    Re: Powermatic 2700 shaper spindle bearing replacement
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- Check this out... http://www.woodweb.com/cgi-bin/forums/swmf.pl?read 768261 It's not real ...

    Re: tooling for cabinet parts
    A message posted at WOODWEB's CNC Forum (2/24) -- Kevin.... With all respect to you and WOODWEB, you should seriously consider posting your request a ...

    Re: Microvelum with RouterCim
    A message posted at WOODWEB's CAD Forum (2/24) -- I know the purpose of Woodweb is to contribute generally useful information and exchange ideas, and ...

    Re: Toxic Employee
    A message posted at WOODWEB's Business and Management Forum (1/24) -- I had to pay that few thousand,,, Knew the employee for some years... Some how ...

    Re: Scammer on Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (12/23/22) -- Hi all, I'm glad Mark avoided the scam before it was too late. At Woodweb, ...

    Re: Valuating New Shop Machinery
    A message posted at WOODWEB's Business and Management Forum (12/23/22) -- I never checked in the last couple of days , but there was a Brandt, I thin ...

    Re: Non magnetic hinge source
    A message posted at WOODWEB's Architectural Woodworking Forum (12/23/22) -- Hi Skillet, Not sure if you saw this, but there has been some discussion ...

    Re: Paperless shop questions
    A message posted at WOODWEB's CAD Forum (12/23) -- Gavin, Please see this thread here: http://www.woodweb.com/forum_fdse_files/business/787593.html I ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/23) -- There is a classified section here on Woodweb YMMV. There are other woodworkin ...

    Re: Hardware change
    A message posted at WOODWEB's Cabinetmaking Forum (9/23/24) -- Greetings all, Thanks for the mention, Leo. I am always happy to assist with any Salic ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/23/21) -- Thanks for the initial feedback! I'll look at the "ad" issue, ther ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/23/21) -- Being able to edit posts is a pretty big deal I think. I would not underesti ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/23/21) -- Use on Phone will be better readable. I like it ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/23) -- Ok little sister, that stuff is ok. Yea that's right it is ok, but not great. I ...

    Re: RUBBERWOOD
    A message posted at WOODWEB's WOODnetWORK Forum (7/23) -- David - you could try posting a "Wanted to Buy" listing at WOODWEB's Lumber Excha ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/23) -- Tim gets called Tim several times during each one of his monilogues at some poi ...

    Re: Microvellum resell
    A message posted at WOODWEB's CAD Forum (2/23) -- WOODWEB's Classified Exchange is available for posting this type of item for sale - just click on t ...

    Re: Gang rip blade configuration
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- If I were the cynical sort, I'd say the more teeth, the more it costs to service t ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (11/22) -- Contact Rangate, a Woodweb advertiser. They have a knot filler that is much quicker than epo ...

    Re: smoking of wood
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/22) -- Heck, and I just thought I was smoking the Thankgiving bird........ :) Hap ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/22/21) -- Looks nice and clean on my phone, and know you've gotta do what youve gotta ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/22/21) -- Will the posts be editable? ...

    Re: Oak grain with solid white f8nish
    A message posted at WOODWEB's Finishing Forum (9/22) -- Thanks for the replies. I finnally got ahold of the guy that knows his stuff and he got me a ...

    Re: Where can I buy Trestle Table Leg components.
    A message posted at WOODWEB's Furniture Making Forum (8/22) -- If you look at WOODWEB's Product Directory, there is a category titled "component ...

    Re: Stiles construction interior shaker doors
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- I'd like to interject a fact here. What makes wood warp (bow, twist, cup, etc ...

    Re: Drawing Software
    A message posted at WOODWEB's Architectural Woodworking Forum (6/22) -- It will draw anything you can imagine in about any format you want. It's also ...

    Re: Pump size
    A message posted at WOODWEB's Finishing Forum (4/22) -- I get really good results with pressure pot, hvlp compressed air gun when spraying the Kem Aq ...

    Re: Questions: re: carving wood blanks on one-side only
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/22/23) -- I'm convinced now that if the moisture content of the wood is at equilib ...

    Re: Total Cost of Ownership pickup Truck example
    A message posted at WOODWEB's Business and Management Forum (3/22) -- Salutations Woodwebers, I am no tax pro and definately appreciate the info. Som ...

    Re: My dilemma....
    A message posted at WOODWEB's Business and Management Forum (3/22) -- Whoever thought that posing a simple question would birth the new "psychol ...

    Re: MLC's Agualente vs. Agualente Plus
    A message posted at WOODWEB's Finishing Forum (2/22) -- I'm about to get some experience with the Plus. I ordered some pigmented Agualente from my su ...

    Can I buff solid surface edges on a bander?
    A message posted at WOODWEB's Cabinetmaking Forum (2/22) -- I have 150 6' x 6" strips of standard SS to bullnose and buff. Can I find the correc ...

    Re: wood shrinkage calculator
    A message posted at WOODWEB's Sawing and Drying Forum (2/22) -- Bill - the calculator for sycamore is now working correctly. Thank you for pointing t ...

    Re: Mass production
    A message posted at WOODWEB's WOODnetWORK Forum (2/22) -- Hello, I see you have or had a need for a furniture manufacturer. My company has been at ca ...

    Re: closing shop
    A message posted at WOODWEB's Cabinetmaking Forum (1/22) -- Woodweb exchanges, trade association forums, machine and hardware supplier reps, service ...

    Re: closing shop
    A message posted at WOODWEB's Cabinetmaking Forum (1/22) -- Right here at WOODWEB, of course! Please click on the link below to see our Machinery Exc ...

    Looking for marketing ideas for shop
    A message posted at WOODWEB's Business and Management Forum (12/21) -- Greetings I'm a 67 yr old semi-retired General and Engineering Contractor. Sta ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/21) -- You make some good points David. There was a time once when the gains the LGBT ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/21) -- The whole premise behind the 6 hour day is to be more productive than you are ...

    Re: Wood Cad Cam outline geometry constraint options needing elaboration
    A message posted at WOODWEB's CAD Forum (10/21) -- Hi again all. I have a new question in case anyone can help: http://www.woodweb.com/cgi-bin/forums ...

    Re: SCM Tech z1 spindle not releaseing
    A message posted at WOODWEB's CNC Forum (9/21) -- FYI guys there is only one kind of lubricant for an HSK tool. This is Lusin G31 spray to be applied ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/21) -- Good post Trout. "learn to learn" is a great remark. Craft is definitely a v ...

    veneer moisture issues
    A message posted at WOODWEB's Architectural Woodworking Forum (8/21/23) -- Hello Woodweb! So question for the day... Any suggestions on what ambient ...

    Re: Normal wood grain or spill/defect??
    A message posted at WOODWEB's Finishing Forum (8/21/23) -- Normal. Forum guidelines; WOODWEB is a professional industrial woodworking site. Hobbyist ...

    Re: Passage door supplier
    A message posted at WOODWEB's Business and Management Forum (8/21) -- I will respond, though we don't compete well with the larger production shops a ...

    Re: sand paper
    A message posted at WOODWEB's Finishing Forum (7/21) -- Wayne - full disclosure, I sell sandpaper. So, there isn't one correct answer. I sell a lot o ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- 4 post is what is needed. Take a look at the Ex-Factory link I posted. This gives ...

    Re: Recommended installers in NYC
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/21) -- There is an excellent resource to locate other woodworking profession ...

    Re: Tree scale chart
    A message posted at WOODWEB's Forestry Forum (6/21) -- Eric If you are referring to a log volume chart, you should check out our log volume calculato ...

    Re: Looking for Experienced Laminating & Solid Surfacing Providers
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/21/25) -- Please post these types of messages in our "Job Exchange", ...

    faux beam installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/21) -- Hi, I'm referring to the post in this forum:No-Seam Faux Ceiling Beam ...

    Re: Design flaw ooops...
    A message posted at WOODWEB's Cabinetmaking Forum (5/21) -- Mark, Being a cabinetmaker for the past 21 years, i would totally agree with you. Until i ...

    Re: Does anyone know how to make this joint?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/21) -- In Woodweb's Machinery listings is a Beehive box machine for sale. It is much ...

    Re: Kem aqua plus white spraying technique
    A message posted at WOODWEB's Finishing Forum (4/21) -- Any problems with the Kem Aqua Plus primer? Someone on Woodweb said he had some chipping on b ...

    Re: grab-bag... scrap lumber
    A message posted at WOODWEB's Value Added Wood Processing Forum (2/21) -- Mark, WOODWEB has a resource that may be helpful - you can list this at our ...

    Re: would you warranty this entrance door?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/20) -- Joel, if you are having problems with your image, you can send it to me via ...

    Re: Expansion of quartered sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (9/20) -- Get several readings on your moisture meter now. Then go to the Shrinkulator ...

    Re: Foreman uses the Buddy System
    A message posted at WOODWEB's Business and Management Forum (7/20) -- Mauricio My opinion would become work for me, I'll give you all the overtime yo ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/20) -- Pat, You raise a good point. The economy this administration started with was t ...

    Re: Cleaner Air
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/20) -- Im not sure of the filtering in the Jet and PM units, these we ar ...

    Re: Singcore panels
    A message posted at WOODWEB's Architectural Woodworking Forum (6/20) -- Gary this is the post I meant to comment on Woodweb sent me an email saying t ...

    Re: finish outsourcing shop
    A message posted at WOODWEB's Finishing Forum (5/20) -- Jake - you are welcome to post a "Seeking Services" listing at WOODWEB's Job Exchan ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (5/20) -- David, I have to confess I did not go to Marco's website when I responded to this issue. Some ...

    Re: Topped out
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/24) -- First I'm thankful i& rejuvenated by the words of encouragement and underst ...

    Re: Mold making
    A message posted at WOODWEB's Furniture Making Forum (4/20) -- Pete- I did not mean to wear your patience thin. I understand what you are saying. One ...

    Re: 2nd CNC
    A message posted at WOODWEB's CNC Forum (2/20/25) -- Thanks for the responses. Karl. We are processing sheet goods. We have the square footage for 2 ...

    Please Help Source Polished Brass/Chrome Screws/Rivets?
    A message posted at WOODWEB's Cabinetmaking Forum (1/20) -- Hello WoodWeb Team!! I really like the community support on this site! I need help with a ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/19/21) -- I think perhaps less than 1% of the fabricators here on Woodweb that talk about makin ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/19) -- Pat, The word "demographics" means nothing all by itself. There is, ...

    Intermediate veneer layer
    A message posted at WOODWEB's Veneer Forum (11/19) -- Hi, my name is Roger and I am a new member of Woodweb. As I near retirement from my day job I a ...

    Re: Klever 1224 Biesse Service
    A message posted at WOODWEB's CNC Forum (9/19) -- They finally sent the "A" team out and he knows what he is doing. I had to go to Corp. to ...

    Re: In need of a finisher , Fairfield county , Ct
    A message posted at WOODWEB's Cabinetmaking Forum (8/19) -- Dan - don't forget you can post a "seeking services" or "offering employme ...

    Re: Storing Casework and Millwork in Semi Trailers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/19) -- Over the years, I have followed many many comments posted by Gene Wengert reg ...

    Re: Timber frame bandsaw
    A message posted at WOODWEB's Cabinetmaking Forum (7/19/22) -- Keep removing my posts a$$holes. This site is dead anyway...when the only guy respondi ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/19) -- Mel, That is exactly what I'm saying on THIS post, I don't know about others. I ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/19) -- "Mel -- how does your shop track custom tasks? I gather they are quite suc ...

    Re: Quick conectors to air tools leaking air all the time
    A message posted at WOODWEB's Cabinetmaking Forum (5/19) -- "Whats the difference between the home depot special and the Milton V?" The V h ...

    Re: labor cost
    A message posted at WOODWEB's Veneer Forum (4/19) -- Posting up a question like yours can lead to multiple answers since Woodweb is available to the ...

    Re: how to create inverse profile of ogee door/window trim
    A message posted at WOODWEB's Cabinetmaking Forum (3/19) -- It appears that you are describing what is called 'cope and stick joinery'. Stick being t ...

    Re: New spray room
    A message posted at WOODWEB's Finishing Forum (2/19/23) -- this may help also https://woodweb.com/search.html?Terms paint+booth&Realm All ...

    Re: Rift and quartered white oak veneer?
    A message posted at WOODWEB's Veneer Forum (2/19) -- Historically, all wood in a kitchen - especially horizontal work surfaces - is solid wood. I wou ...

    Re: Need a book or manual on sawyer terminology.
    A message posted at WOODWEB's Sawing and Drying Forum (2/19) -- The Wood Handbook - and the updated 2010 version - is available at WOODWEB's Knowledg ...

    Re: router vs shaper
    A message posted at WOODWEB's Cabinetmaking Forum (1/19) -- The most obvious answer is you need a CNC router. That said so do I, hope to have one in ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (12/18/22) -- I have never seen a book. I started out 30 years ago with very little support. I gained most th ...

    Re: Need millwork/cabinet engineer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/18/21) -- Kris, There is a employment section right here on Woodweb. I have ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/18) -- Hi Paolo, I had checked out CabMaster and another company both out of Australia. They both looked ...

    Re: Jobs and only 100 k in the USA ?
    A message posted at WOODWEB's Business and Management Forum (9/18) -- The woodworking industry (read: fragmented, disorganized, slow and dull-witted) ...

    Current millwork market
    A message posted at WOODWEB's Business and Management Forum (8/18/25) -- Hello, I've been reading Woodweb for 10+ years and have come to respect the ...

    Re: Vacuum cups/pods/blocks ?
    A message posted at WOODWEB's CNC Forum (5/18) -- Scott, Likely a little late on this one, but the time it takes you to research and develop your own ...

    Re: Mounting Wall Paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/18) -- While I cannot speak to the AWI Quality Standards on this particular ...

    Re: another wiping stain spraying thread
    A message posted at WOODWEB's Finishing Forum (5/18) -- thanks for your answer. I was refering more to the technique described in an older threead : ...

    Re: Wood-mizer advice
    A message posted at WOODWEB's Sawing and Drying Forum (4/18) -- Think about the size of logs you'll be milling. The 28 has more capacity. It is also ...

    Re: Paying for Purchases from Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (3/18) -- Jake, the machine is 1000's of miles away and with our work load there is no wa ...

    Re: Paying for Purchases from Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (3/18) -- I have never used the Machinery Exchange, so please pardon the beginner questio ...

    Re: Flamible storage Cabinets
    A message posted at WOODWEB's Finishing Forum (3/18) -- So, do you want to pass an inspection or do you want to protect your shop? I don't sell used, ...

    Re: Update on getting crap in the finish
    A message posted at WOODWEB's Finishing Forum (2/18/25) -- Mike, I noticed you say that you are spraying on MDF. We had a similar problem with what w ...

    Re: wood movement
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- You can predict the amount of movement using our Wood Shrinkage Calculator at the lin ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- James - The material is paid for, that is not an issue. Keith - Good point! I ...

    Re: 4'x12' walnut table top options
    A message posted at WOODWEB's Furniture Making Forum (1/18) -- It is wasteful to make a table out of wood? You are kidding, right? You know that wood ...

    Re: A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- This is a good suggestion. Thumbs up also! ...

    Re: air drying ash
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Here's a guide that's posted on here of most areas.....IN Ohio to 10% ADing....IT AIN ...

    Re: Balancing Craftsmanship and Profit in a Competitive Market
    A message posted at WOODWEB's Business and Management Forum (10/17/24) -- Interesting observation you have. I asked myself the same question back dur ...

    Re: Spraying Waterbased Finish
    A message posted at WOODWEB's Finishing Forum (9/17) -- Mastercabman - if you can send me the charts or a link to them via email, I'll see if I can g ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/17/21) -- That was a loss to this community. A great source of experience and informat ...

    Re: Modern Church Rail installation
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Will thats a great story and thanks for posting. Its amazing what happens and ...

    Re: Source for quality logs in the Southwest
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- You are welcome to post a "wanted to buy" listing at WOODWEB's Lumber Excha ...

    Re: Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Kevin- First thing is to get legal with licensing in the states in which you do ...

    Re: Drying slab locust from a stump
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- Joe - if the image with your post is incorrect, please send me the correct image and ...

    Re: Audio versions of Woodweb Articles?
    A message posted at WOODWEB's WOODnetWORK Forum (4/17/24) -- This would be great. The voice is pretty robotic, but I assume this is more about sharin ...

    Re: Audio versions of Woodweb Articles?
    A message posted at WOODWEB's WOODnetWORK Forum (4/17/24) -- Thanks for the feedback - a link is a good idea - since many articles have photos. -Jim ...

    Re: Audio versions of Woodweb Articles?
    A message posted at WOODWEB's WOODnetWORK Forum (4/17/24) -- Good idea. Not bad presentation. I give it a thumbs up. BH Davis ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/17) -- Do you use a mobile device? If so, do you use any woodworking app ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? L ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by partic ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by par ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by pa ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Finishing Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by participat ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's WOODnetWORK Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by particip ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Veneer Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by participating ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's CNC Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by participating in ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's CAD Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by participating in ...

    Re: Calif Sales Tax Audit
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Thanks for taking the time, Alan. I don't know where I'd be without Woodweb. Yo ...

    Re: Purchasing doors online
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- Have a look at the companies who advertise on Woodweb. They are the ones paying for th ...

    Re: Mystery Discoloration of Doug Fir Veneer
    A message posted at WOODWEB's Finishing Forum (2/17) -- Everyone's thoughts and input have been invaluable and very educational, particularly from Ge ...

    selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/17) -- Our customer changed their mind on a 3Form order we just got. 3Form apparentl ...

    Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/16) -- Hello, I am new to Woodweb, and am in the process of possibly buying a cabinet shop in e ...

    Re: Sketchup to Xilog Maestro
    A message posted at WOODWEB's CNC Forum (12/16) -- For anyone thinking about purchasing a SCM Router, especially one with a handheld remote. I would ...

    Re: vacuum newbie
    A message posted at WOODWEB's CNC Forum (12/16) -- From this very website: http://www.woodweb.com/galleries/shopbuilt/posts/87.html ...

    Re: finishing massive redwood top on Kauai
    A message posted at WOODWEB's Furniture Making Forum (11/16) -- Sounds like a great project, and the innovations suggest say to me that this is somet ...

    Re: Edgebanding issues
    A message posted at WOODWEB's Cabinetmaking Forum (10/16) -- http://www.woodweb.com/forum_fdse_files/cabinetmaking/799956.html ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/16/21) -- You might want to scroll down the posting and answer page and read the forum guideline ...

    Re: DACA & Shortage of Workers
    A message posted at WOODWEB's Business and Management Forum (9/16) -- I think Trump is following the business forum on Woodweb! He must have been rea ...

    Re: Another startup woodshop.
    A message posted at WOODWEB's CAD Forum (9/16) -- Stephan, If you get a 32 bit version of Autocad installed (longbow software is required to install ...

    edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/16) -- My shop frequently applies two types of edgebanding: i) 3/4-1" wide ...

    Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/16) -- I don't know how to search for information about how many cubes a ...

    Re: Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/16) -- Good morning Oggie, Since you have a CNC router (even being a small one), you may want to ...

    Re: Inventor vs. Solidworks
    A message posted at WOODWEB's CAD Forum (4/16) -- I know the purpose of Woodweb is to contribute generally useful information and exchange ideas, and ...

    Re: Getting Dark Brown Stain
    A message posted at WOODWEB's Finishing Forum (3/16) -- Any time that you have problems posting images, be sure to let me know - I can help or I can ...

    Re: Thermwood cut center
    A message posted at WOODWEB's CAD Forum (3/16) -- Harold, You may not find many WOODWEB visitors that are using the Thermwood Cut Ready Cut Center. N ...

    Re: weathered gray ash- killing me.
    A message posted at WOODWEB's Finishing Forum (3/16) -- I really like the unique way that chemical stains color wood. One of the appealing factors is ...

    Re: Calif Sales Tax Audit
    A message posted at WOODWEB's Business and Management Forum (3/16) -- I have been highly aware of this tax law for quite a while, thanks to Woodweb, ...

    Re: What is the maximum size of a frame and panel door to join it with cope
    A message posted at WOODWEB's Architectural Woodworking Forum (2/16/22) -- Thanks for that BH. That's the first new thing I've learned today. Gotta l ...

    Re: Cabinet door production time
    A message posted at WOODWEB's Architectural Woodworking Forum (2/16) -- Tracy, Here's a quick video of what makes up that outboard fence on my shaper ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (1/16/23) -- Thanks, there is no specific question in this post. Woodweb is an amazing resource and I use it ...

    Re: New to employee management
    A message posted at WOODWEB's Business and Management Forum (1/16) -- I have started down the lean road after reading several posts here on WoodWeb. ...

    Re: when can we use white oak?
    A message posted at WOODWEB's Sawing and Drying Forum (12/15) -- It will shrink proportionally more in thickness but will actually shrink way more in ...

    Re: Electric Appliance Lift
    A message posted at WOODWEB's Furniture Making Forum (12/15) -- We'll see what happens Chris, have an email from another company that makes lifts too ...

    New Mobile forums format
    A message posted at WOODWEB's WOODnetWORK Forum (11/15/21) -- Hi Woodweb users, You'll notice this forum is using our new "mobile friendly" ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (11/15) -- Not sure what you want elaborated on. We operate pretty old school. $2k SawSto ...

    Re: Whats a 1 man shop to do?
    A message posted at WOODWEB's Cabinetmaking Forum (10/15/24) -- Tracy, wasn't it you who asked this same question back in 2023? https://woodweb.com/c ...

    Re: veneer panel discoloration
    A message posted at WOODWEB's Veneer Forum (10/15) -- You could do two things. Shade in the area that's changed color or redo the entire lobby. Depen ...

    Re: How to make the sliding part of this console
    A message posted at WOODWEB's Furniture Making Forum (10/15) -- Just noticed that you're in my neck 'o the woods. If you'd rather outsource the mecha ...

    Re: How do you compete with smaller shops?
    A message posted at WOODWEB's Business and Management Forum (9/15) -- Once upon a time, here on Woodweb, there were several old hands that answered t ...

    Re: Anyone Know Of Directory To Find NY Area Installation Professionals?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/15) -- Vince, There is an excellent resource to locate other woodworking pro ...

    Re: small mill viabillity
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/15) -- Roger, There is a very similar thread going. See it here: http://www.woodwe ...

    Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/15) -- Hello Woodweb professional user We are making decision to use new cad/cam program instead of Autoca ...

    Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (8/15) -- Has anyone sold any machines here on Woodweb using the Machinery Exchange? Are ...

    Re: how do i get closet jobs
    A message posted at WOODWEB's Business and Management Forum (6/15) -- It's simple. Build a closet. Your closet. A closet for your parents. For a frie ...

    EXTECH Moisture Meter M0210
    A message posted at WOODWEB's Sawing and Drying Forum (6/15) -- Hello group it's been a while. I bought a EXTECH M0210 moisture meter about a year an ...

    Re: Buying cnc
    A message posted at WOODWEB's CNC Forum (3/15/23) -- Call Jack at Limtech, he advertises here on Woodweb. I have bought two Limtech Orion 5x10 machin ...

    Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/15) -- Hi all, This site and its extensive archive have been very informative so to start I j ...

    Does wood thickness matter?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/15) -- After 25 years of building exterior shutters, my question is, is a 3/8" ...

    Re: Faking a live edge
    A message posted at WOODWEB's Architectural Woodworking Forum (2/15) -- Somebody on WoodWeb must have a live edge cnc router code... ...

    Re: Hi everyone. Happy New Year !
    A message posted at WOODWEB's Architectural Woodworking Forum (1/15/23) -- David, I had no idea that you had retired. Congratulations. It's nice to s ...

    Re: kiln drying sinker Caribbean heart pine
    A message posted at WOODWEB's Sawing and Drying Forum (1/15) -- Hi Gene,..thanks for your response and questions. We will be initially drying 4/4 wit ...

    Re: New to employee management
    A message posted at WOODWEB's Business and Management Forum (1/15) -- The number one tool that lean can lend to cabinetshops is batch size. If you re ...

    Re: New to employee management
    A message posted at WOODWEB's Business and Management Forum (1/15) -- Tim, I agree, I would love to see Woodweb start a lean mfg. forum. Mark ...

    Built Up MDF Edge or Edgebanding for Pigmented Finish on Table Top?
    A message posted at WOODWEB's Finishing Forum (12/14) -- Hi, I've been a Woodweb reader for many years and never posted before, but I'm stumped by th ...

    Re: Creating a Job or creating a Business
    A message posted at WOODWEB's Business and Management Forum (11/14) -- Better advise would be demonstrating how to monetize your skills not diminish ...

    Re: Craftsman finish on 1/4 sawn white oak
    A message posted at WOODWEB's Finishing Forum (11/14) -- Try This Link www.woodweb.com/knowledge_base/Fuming_white_oak.html ...

    Re: curved stair handail questions for proffessionals
    A message posted at WOODWEB's Architectural Woodworking Forum (10/14) -- Those people that have not experienced or seen the products of a real crafts ...

    Re: Buying custom cabinet shop: a good idea?
    A message posted at WOODWEB's Business and Management Forum (9/14) -- Honestly I would need a lot more information before saying yes or no. And numbe ...

    Re: Anyone ever work with Boral ?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/14) -- UPDATE: 5 months later and the project just came across my desk again. Boral ...

    Re: were can i buy a chainsaw mill which cuts 65 inches or 72 inches
    A message posted at WOODWEB's Sawing and Drying Forum (9/14) -- I am here an live in Central Texas I am listed in the "Find a Sawyer" tab a ...

    Re: First run at entry/exterior 5 panel, raised panel doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/14/22) -- I appreciate everyone’s constructive criticism. A lot of you have made gre ...

    Re: Good buy on a hand held stitcher?
    A message posted at WOODWEB's Veneer Forum (8/14) -- How does a stitched seam compare to a taped seam? How do you clean it off, or do you stitch the ...

    Re: Processing on a vertical panel saw
    A message posted at WOODWEB's Cabinetmaking Forum (7/14) -- Congratulations on your Striebig Joe! That was my favorite panel processing saw. You can ...

    Re: Dust Collector Sucking up conveyor belt
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/14) -- Timesavers is on the hook to provide your solution, are they not? ...

    Re: Finished Ends on Prefinished Cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (5/14) -- Hi Kalvin, You may want to check out the Lamello P-System. Installing face frames and fin ...

    Re: Cabinet Layout for flood victims needed
    A message posted at WOODWEB's Cabinetmaking Forum (5/14) -- http://www.woodweb.com/cgi-bin/forums/cad.pl?read 822853 ...

    Re: If you were an employee again, what would you ask at an interview?
    A message posted at WOODWEB's Business and Management Forum (5/14) -- I apprenticed at a shop in San Francisco, Fink and Schindler back in the late 1 ...

    Solutions for inset door 90 degree corner cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (5/14) -- Hello everybody on WOODWEB. I am scratching my head over how to go about building a base ...

    Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/14) -- Greetings Wise People from Woodweb Forest, I'm trying to find out what would be the most ...

    Re: Amazon going to be selling cabinets soon
    A message posted at WOODWEB's Business and Management Forum (4/14) -- There are several reasons I pay a lot of attention to Amazon. The first one wou ...

    Re: Hardwood question
    A message posted at WOODWEB's Cabinetmaking Forum (4/14) -- On lumber under 15% MC, the two meters should be within 1% MC if used correctly. The pinl ...

    Re: Buying cnc
    A message posted at WOODWEB's CNC Forum (3/14/23) -- Call Jack at Limtech, he advertises here on Woodweb. I have bought two Limtech Orion 5x10 machin ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/14) -- When we make these, they are often 2" thick or better. We will rip 8/4 r ...

    Re: spray booth
    A message posted at WOODWEB's Finishing Forum (2/14) -- Thank you Woodweb Staff that was a lot of work to get it to work...what a great bunch of awes ...

    Re: Another router bit question
    A message posted at WOODWEB's Cabinetmaking Forum (2/14) -- The issue of banana cut is better explained on this thread http://www.woodweb.com/cgi-bin ...

    3D CNC Machining
    A message posted at WOODWEB's CNC Forum (1/14) -- Hello Woodweb, I am looking for any and all information from users of 3D software to create program ...

    Re: Bathroom Finish Choices
    A message posted at WOODWEB's Finishing Forum (12/13) -- Are you sure you need a Polyester finish? Look at the Woodweb Knowledge base from 2001 Link ...

    Re: Used edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (11/13) -- ...router edge trimmers/grinder end trimmer. The bodies look pretty standard, like a bos ...

    Re: veneer panel discoloration
    A message posted at WOODWEB's Veneer Forum (10/13) -- If you are having problems posting a picture, you can send it directly to me and I will add it ...

    Please! need some help
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/13) -- Post Response | Notify Me Of New Messages | A Note About Viruses ...

    Re: What glue are they using?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/13) -- Unbalanced panels are caused by two things. Having one completely different p ...

    Re: Finishing choices for a sappy slab of fir
    A message posted at WOODWEB's WOODnetWORK Forum (5/13) -- http://www.woodweb.com/knowledge_base/Setting_Pitch_in_Douglas_Fir.html ...

    Re: milling process
    A message posted at WOODWEB's Furniture Making Forum (5/13) -- Thanks for your WoodWeb reply Rich. The chair leg description was just an example. I'm ...

    Re: Hardwood question
    A message posted at WOODWEB's Cabinetmaking Forum (4/13) -- I believe that if they have properly completed their drying process, the sooner you get i ...

    Re: Profit Margin
    A message posted at WOODWEB's Business and Management Forum (3/13) -- "As much as possible!" But seriously folks..... I think you are going ...

    Re: Profit Margin
    A message posted at WOODWEB's Business and Management Forum (3/13) -- That's funny! I'm intrigued by this one. I think at the end of the day this is ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Bruce Hoadley's "Understanding Wood" is fundamental and will help answer ...

    Re: PARTS CART
    A message posted at WOODWEB's Cabinetmaking Forum (2/13) -- Hi Bill I posted awhile ago with this same question. Check out these two threads relating ...

    Re: Hi everyone. Happy New Year !
    A message posted at WOODWEB's Architectural Woodworking Forum (1/13/23) -- BH -Happy New Year to you and all the readers of Woodweb! I retired April ...

    Re: Dust Pipe Needed
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/12) -- Scott - you can advertise your dust pipe for sale at WOODWEB's C ...

    South Carolina Floods
    A message posted at WOODWEB's Business and Management Forum (10/12) -- I have received many "Check in's" from members of Woodweb, Many than ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/12) -- FWIW In the 90s CNC was a new thing to woodworking Alan was the go to guy to ga ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/12) -- I have two MGBs (mine and my wife's) and face this issue all too often on the M ...

    Re: Is a recession coming?
    A message posted at WOODWEB's Business and Management Forum (8/12) -- During the "Great Recession", I managed to skate until 2010 with work ...

    Re: Anyone use a Table Top Mortising Machine?
    A message posted at WOODWEB's Furniture Making Forum (8/12) -- http://www.woodweb.com/knowledge_base_images/bah/veneering-table-legs_02.jpg is is a s ...

    Re: Applying water base paint to a solvent-based finish…
    A message posted at WOODWEB's Finishing Forum (6/12) -- Mike, As a neutral observer of this thread I have to say that Adam's response is totally in l ...

    Re: Alcohol dye stain spraying.. use a retarder?
    A message posted at WOODWEB's Finishing Forum (5/12) -- John, What you are saying makes total sense. Noted. Thank you again for your help. This is ha ...

    Re: Alcohol dye stain spraying.. use a retarder?
    A message posted at WOODWEB's Finishing Forum (5/12) -- You can send pictures directly to me and I will add them for you - send them via email to web ...

    Re: Shellac Washcoat
    A message posted at WOODWEB's Finishing Forum (4/12/24) -- https://woodweb.com/cgi-bin/forums/finishing.pl?read 870671 ...

    Re: RE: Starting New Wood Business
    A message posted at WOODWEB's Business and Management Forum (4/12) -- Sounds rather familiar. http://www.woodweb.com/cgi-bin/forums/business.pl?read ...

    Re: WSJ: We read it so you don't have to.
    A message posted at WOODWEB's Business and Management Forum (4/12) -- You're probably right that the WSJ "has articles and information in it tha ...

    Re: Sanders for Stain-grade Prep
    A message posted at WOODWEB's Finishing Forum (3/12/23) -- I have found the articles from Surf Prep to be very helpful in understanding the process o ...

    Re: Engineered Veneer
    A message posted at WOODWEB's Veneer Forum (3/12) -- Just a guess on my part. I also asked my question in the finishing forum and got great response. ...

    Re: spray booth
    A message posted at WOODWEB's Finishing Forum (2/12) -- Jeff - if you can send the video file to us or let me know where the file is located, we can ...

    Re: selling reclaime wood from old buildings
    A message posted at WOODWEB's Business and Management Forum (1/12/24) -- You mean besides Woodweb lumber classifieds? Scroll down on the home page. ...

    Re: mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/12) -- Most of the cabinetmakers on Woodweb are Custom guys, working the premium res ...

    Re: How to get rid of so much stuff
    A message posted at WOODWEB's Cabinetmaking Forum (12/11) -- Scott - the miscellaneous items can be listed for sale at WOODWEB's Classified Exchange ...

    Re: Installation Company for Denver, CO Projects
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/11) -- Marc - you are welcome to post a "Seeking Services" listin ...

    Commercial Top Laminating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/11) -- Hello. Thought I'd post this here as well as the cabinetmaking forum. I ...

    Re: Sanding Extension table edges
    A message posted at WOODWEB's Furniture Making Forum (12/11) -- Nicko- I think your idea sounds good, currently we make about eight sizes of tops wit ...

    Re: Buying the Business
    A message posted at WOODWEB's Business and Management Forum (11/11) -- As one guy told me when I was starting out - "That's not a business, that ...

    Re: Sawing Method
    A message posted at WOODWEB's Forestry Forum (11/11) -- Generally one saws timber, which is typically green, into lumber, using a sawmill. My advice ...

    Re: Which shoe molding use in my kitchen cabinet
    A message posted at WOODWEB's Architectural Woodworking Forum (10/11/22) -- New or not, professional or amateur, what kind of question is that? Plast ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/11) -- He will be missed, his posts were always reasoned and spot on, and his grasp of ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/11) -- Always sorry to hear, My Prayers to all in his Family of Life and work. ...

    Re: exterior finish
    A message posted at WOODWEB's Finishing Forum (8/11) -- Sikkens exterior side, lacquer interior side. Sprayed Sikkens. For 20 years now, with no comp ...

    Re: Woodwork for Invenror
    A message posted at WOODWEB's CAD Forum (7/11) -- Not sure of what woodwork for inventor is these days. However, if it will export a proper BOM as a ...

    Re: Spray stain on Maple
    A message posted at WOODWEB's Finishing Forum (6/11) -- I just worked out an amber color on maple. It ended up with a busy schedule, but looks really ...

    Re: Spray stain on Maple
    A message posted at WOODWEB's Finishing Forum (6/11) -- ML Campbell clear stain base red this: http://www.woodweb.com/knowledge_base/Finishing_Techni ...

    Re: Alcohol dye stain spraying.. use a retarder?
    A message posted at WOODWEB's Finishing Forum (5/11) -- John, Thank you for your time on this. you may not be scaling the photos down enough for Wood ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- You will find some good discussion of glue failure in the archives and Knowledge B ...

    Re: Stiles Machinery Technical Support
    A message posted at WOODWEB's CNC Forum (3/11) -- I bought a brand new Butfering sander from Stiles. While I was waiting for it to arrive I figured I ...

    Re: First cnc (hopefully)
    A message posted at WOODWEB's CNC Forum (2/11) -- Salesmen are just that, salesmen, go to the plant meet the techs meet the support. they are the aft ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/11/23) -- I would not use Titebond III in a hot press. David Sochar on Woodweb has pointed out that ...

    Re: Where to divide work
    A message posted at WOODWEB's Business and Management Forum (12/10) -- Pat, I have itemized in detail each step of the process from initial contact t ...

    Horizontal Boring Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- I am in the market for a new horizontal boring machine and would like to know wha ...

    Re: Ventless (brand) Spray booths
    A message posted at WOODWEB's Finishing Forum (11/10) -- http://www.woodweb.com/cgi-bin/forums/finishing.pl?read 817231 ...

    Re: Dining table and bar top - solid vs veneer
    A message posted at WOODWEB's Furniture Making Forum (11/10) -- Thank you David for your thoughtful and candid response - I agree, I'm not sailing ac ...

    Re: Making a living band sawing letters
    A message posted at WOODWEB's Business and Management Forum (9/10) -- Adam - Thanks for agreeing with the observation I made about the mindset of beg ...

    Re: 21% MC in blue pine stair treads
    A message posted at WOODWEB's Sawing and Drying Forum (9/10) -- We have a better calculator for shrinkage and other items too here at WoodWeb. Look a ...

    Re: Exterior wood doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/10) -- We have made many doors with a method similar to what GW describes. You can s ...

    Re: Bird's Eye Maple top
    A message posted at WOODWEB's Furniture Making Forum (9/10) -- 1/2" is a little thin for a table top, especially without an apron but I am going ...

    Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/10) -- Alan Fenstermacher passed away a few months ago I don't have any more informati ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/10) -- Fenstermacher meant window maker in German ...

    Reinforced Miters
    A message posted at WOODWEB's Architectural Woodworking Forum (8/10) -- There was a good question about reinforcing miters as mentioned in my post &q ...

    Re: Too much work?
    A message posted at WOODWEB's Business and Management Forum (6/10) -- Man this is why I love the Woodweb. I like the one, Raise Prices. It doesn't im ...

    Re: Blum servo trash slide-out
    A message posted at WOODWEB's Cabinetmaking Forum (6/10) -- Mark, I am glad it worked out for you! In the future you might check with your supplier t ...

    Re: Est Dry log weight
    A message posted at WOODWEB's Sawing and Drying Forum (6/10) -- Did you try the calculators here at WoodWeb? I would guess around 35 pounds per cubic ...

    Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??
    A message posted at WOODWEB's Furniture Making Forum (6/10) -- Do a search here in Woodweb on PPR. There are even a couple of recent threads about it ...

    Re: WSJ: We read it so you don't have to.
    A message posted at WOODWEB's Business and Management Forum (4/10) -- I am going to go out on a limb here and suggest that the Wall Street Journal ha ...

    Re: WOODWEB Poll: How's Business?
    A message posted at WOODWEB's Sawing and Drying Forum (4/10) -- Too much business over here. Steve ...

    Re: Looking for JMH
    A message posted at WOODWEB's CAD Forum (3/10) -- Thanks so much... there is relatively no training here.... mostly vague question answering... Hence ...

    Re: woodwop users please step inside
    A message posted at WOODWEB's CAD Forum (3/10) -- Can you post an example file? Attached is an example of a parametric perf'd panel with various bord ...

    Re: back-up data about hardwood warping
    A message posted at WOODWEB's Architectural Woodworking Forum (1/10) -- You may want to peruse the wood movement related articles in our Knowledge Ba ...

    Re: A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- thumbs up! ...

    Re: Small Surface Cracks in Cherry Bookcase
    A message posted at WOODWEB's Furniture Making Forum (12/9/23) -- "It is the nature of wood to harbor these little surprises" or some versi ...

    Re: Edgebanding Suppliers
    A message posted at WOODWEB's Cabinetmaking Forum (12/9) -- Thank you both for the suppliers, will enter them into my vendor book for future use. I w ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9) -- Do a search on "chip beat" on the entire Woodweb site and you will see a ...

    Re: Wood over steel in a brutal climate
    A message posted at WOODWEB's Architectural Woodworking Forum (11/9) -- Adam- Attached is a rendering of the entire tree. I made a mistake on the wei ...

    Product to Market
    A message posted at WOODWEB's Business and Management Forum (10/9) -- Hi All, First off I would like to say I am super excited to have found Woodweb. ...

    Re: Product to Market
    A message posted at WOODWEB's Business and Management Forum (10/9) -- Thanks for the responses so far. @Frenchy I was pressed for time & should h ...

    Re: DACA & Shortage of Workers
    A message posted at WOODWEB's Business and Management Forum (9/9) -- In order to assimilate into a free market society you need to have access to cap ...

    Re: Looking for a Local Sawmill
    A message posted at WOODWEB's Furniture Making Forum (9/9) -- There is a resource here at WOODWEB that may help you locate what you need - our Sawing ...

    Re: Need parts cut- Cabinet Vision required
    A message posted at WOODWEB's CNC Forum (9/9) -- WOODWEB has a resource available to assist in locating other woodworking professionals. Our *Woodwor ...

    laminated solid oak slat panels
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/9/22) -- I'm being asked to reproduce this panel material to a different spec t ...

    Re: best laser levels
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/9) -- It looks like the PL4 does not have the two 90 degree planes feature. ...

    Re: Ever kept a bad employee for too long?
    A message posted at WOODWEB's Business and Management Forum (4/9) -- I am right now and reading this reminds me that I should do something about it. ...

    Re: Raised Panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/9) -- If you do a search on here, you'll get 44 hits on sealing MDF edges. https://www.woodweb.c ...

    Re: Used Machinery - 360
    A message posted at WOODWEB's Business and Management Forum (3/9) -- IRS Auctions is a good source - not the IRS you may be thinking of. They have ad ...

    Re: Waste Management
    A message posted at WOODWEB's Business and Management Forum (3/9) -- Another good post Mel. The folks at Woodweb should put you on payroll. We're in ...

    Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- Hello all! I was just wondering if we could get some hourly rates from different pa ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/9) -- Mel, you are correct in that none of us could keep a smart kid. That is why my S ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/9) -- We've had this discussion many times on Woodweb. Check the Knowledge Base. Softer formulas of ...

    Re: drying to single digits p2
    A message posted at WOODWEB's Sawing and Drying Forum (1/9) -- At 60% RH, the lumber's surface will dry to about 10% MC, but no drier. It will take m ...

    Re: AAA spray pattern issue SW CV
    A message posted at WOODWEB's Finishing Forum (12/8) -- You've got 'tails' showing....increase pressure; but 42psi sounds high to me. I am familiar w ...

    Sticking or coping first
    A message posted at WOODWEB's Cabinetmaking Forum (11/8/21) -- I have spent a few hours reading old posts on Woodweb and have noticed quite a few peo ...

    Re: China Trade War & US Lumber Companies
    A message posted at WOODWEB's Business and Management Forum (11/8) -- While it all is subjective, the fact of the matter is that all jobs and wealth ...

    Re: Buss # 4 Planer 30"
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- Jack - we can't help with the value of your machine, but we do have an area where ...

    2023 CR Onsrud Router Defective Phenolic Table
    A message posted at WOODWEB's CNC Forum (9/8/24) -- Howdy Woodweb! We purchased a brand new cnc router from CR Onsrud August 2023 to replace one of o ...

    Re: Does everyone here do residential?
    A message posted at WOODWEB's Business and Management Forum (9/8) -- Get on the Woodweb State your viewpoint in a post Argue with your peers ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8/24) -- I wish Woodweb would filter out these inane AI responses... ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Both Rockwell and Powermatic made 12" cabinet saws. The Rockwell 12/14 and Pow ...

    Re: CNC Newby - Biesse rover 322 - XNC Controller
    A message posted at WOODWEB's CNC Forum (2/8) -- http://www.woodweb.com/cgi-bin/forums/cnc.pl?read 805678 Don't know them, but could work. ...

    Re: This forum
    A message posted at WOODWEB's Cabinetmaking Forum (1/8) -- We uncovered the cause, and the problem is fixed - the "new" flags may not appea ...

    Re: Anyone know who makes this ancient dust collector?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/7) -- Chris - if you can send me the image via email, I will add it to ...

      ---   Return to Top   ---   View More Results   


    Project Gallery Results:

    Contemporary Dark Maple Vanity
    Contemporary Dark Maple Vanity Listing #818 Listed on: 2007-08-19 11:16:47

    Custom Entertainment Center
    Custom Entertainment Center Listing #3234 Listed on: 2011-04-07 17:27:03

    Storage Kids Chair
    Storage Kids Chair Listing #2468 Listed on: 2009-12-24 18:26:48

    Dining Room Table
    Dining Room Table Listing #3167 Listed on: 2011-02-19 06:23:39

    Craftsman Bookcase
    Craftsman Bookcase Listing #1084 Listed on: 2008-02-06 00:44:51

    The infamous kitchen re-surface
    The infamous kitchen re-surface Listing #108 Listed on: 2004-01-13 23:31:07

    Garden Gate
    Garden Gate Listing #3777 Listed on: 2012-03-17 10:09:51

    tigerwood mantle
    tigerwood mantle Listing #1868 Listed on: 2009-02-17 21:58:49

    Mitre Square
    Mitre Square Listing #2280 Listed on: 2009-09-05 20:19:56

    Office System
    Office System Listing #421 Listed on: 2006-09-24 01:26:08

    Segmented Cherry Bathroom
    Segmented Cherry Bathroom Listing #2188 Listed on: 2009-07-08 20:51:59

    Cocktail Table
    Cocktail Table Listing #116 Listed on: 2004-02-03 08:55:20

    A pair of georgian ladies work tables
    A pair of georgian ladies work tables Listing #1106 Listed on: 2008-02-12 05:19:20

    High End Cherry Cabinets
    High End Cherry Cabinets Listing #2500 Listed on: 2010-01-03 13:50:09

    How To Carve...an IRISH CELTIC Toy Chest
    How To Carve...an IRISH CELTIC Toy Chest Listing #603 Listed on: 2007-03-11 12:44:10

    Hoods
    Hoods Listing #2185 Listed on: 2009-07-06 19:35:53

    Alder Plasma TV Cabinet
    Alder Plasma TV Cabinet Listing #993 Listed on: 2008-01-06 10:35:42

    Custom Wood Ceiling
    Custom Wood Ceiling Listing #213 Listed on: 2005-07-10 11:57:48

    25 Person Conference Table
    25 Person Conference Table Listing #639 Listed on: 2007-04-10 10:47:23

    Bubinga Desk
    Bubinga Desk Listing #2258 Listed on: 2009-08-16 08:20:48

    Icon of God
    Icon of God Listing #3775 Listed on: 2012-03-16 14:52:45

    Cherry Office
    Cherry Office Listing #3016 Listed on: 2010-12-20 20:21:18

    Walnut pedestal table
    Walnut pedestal table Listing #177 Listed on: 2005-02-22 07:49:13

    Mahogany and Walnut Tables
    Mahogany and Walnut Tables Listing #2303 Listed on: 2009-09-18 09:47:15

    Wine Racks
    Wine Racks Listing #136 Listed on: 2004-07-09 11:39:00

    Cherry chest on chest
    Cherry chest on chest Listing #441 Listed on: 2006-10-31 13:11:04

    Great Room
    Great Room Listing #4137 Listed on: 2013-05-16 11:52:23

    Coffee Table
    Coffee Table Listing #408 Listed on: 2006-08-29 18:32:21

    Louis XV style chairs
    Louis XV style chairs Listing #914 Listed on: 2007-11-15 17:36:12

    Intarsia Maiden
    Intarsia Maiden Listing #2476 Listed on: 2009-12-25 17:14:30

    Cherry Study
    Cherry Study Listing #1040 Listed on: 2008-01-23 22:36:29

    Wine Glass Rack
    Wine Glass Rack Listing #375 Listed on: 2006-07-10 10:26:05

    Andys mandolin
    Andys mandolin Listing #127 Listed on: 2004-05-02 01:20:26

    Baby Changing Table
    Baby Changing Table Listing #489 Listed on: 2006-12-18 20:34:21

    Alder Staircase
    Alder Staircase Listing #355 Listed on: 2006-05-27 00:01:05

    Arched Door
    Arched Door Listing #1149 Listed on: 2008-02-24 18:35:55

    KITCHEN CABINETS
    KITCHEN CABINETS Listing #804 Listed on: 2007-08-04 13:59:19

    Laser Engraved Door Toppers
    Laser Engraved Door Toppers Listing #1127 Listed on: 2008-02-18 12:18:52

    Cherry/Curly Yellow Birch Headboad/Footboard
    Cherry/Curly Yellow Birch Headboad/Footboard Listing #324 Listed on: 2006-04-04 16:45:05

    Spalted Oak Table
    Spalted Oak Table Listing #2307 Listed on: 2009-09-21 16:17:04

    Front Door
    Front Door Listing #265 Listed on: 2006-01-06 17:36:22

    "Fairy Blossoms" cabinet
    "Fairy Blossoms" cabinet Listing #480 Listed on: 2006-12-12 23:46:21

    Display Case
    Display Case Listing #4447 Listed on: 2014-09-01 21:01:46

    Log Furniture
    Log Furniture Listing #317 Listed on: 2006-03-29 18:04:25

    A georgian serpentine chest of drawers
    A georgian serpentine chest of drawers Listing #1109 Listed on: 2008-02-12 07:16:50

    vanity
    vanity Listing #291 Listed on: 2006-02-23 18:17:28

    Raiders Bar
    Raiders Bar Listing #905 Listed on: 2007-10-27 00:08:45

    Federal Card Table
    Federal Card Table Listing #502 Listed on: 2007-01-12 08:36:48

    Door
    Door Listing #3659 Listed on: 2011-12-22 21:06:54

    Various Quality Cedar Woodworking Pieces
    Various Quality Cedar Woodworking Pieces Listing #614 Listed on: 2007-03-23 00:44:25

    bookcase
    bookcase Listing #525 Listed on: 2007-01-25 10:44:30

    Wood Range Hood
    Wood Range Hood Listing #1138 Listed on: 2008-02-22 12:40:45

    wine cabinets
    wine cabinets Listing #556 Listed on: 2007-02-05 11:16:17

    Espresso Lacquer Kitchen
    Espresso Lacquer Kitchen Listing #532 Listed on: 2007-01-28 00:00:51

    Cherry Dresser
    Cherry Dresser Listing #188 Listed on: 2005-04-21 21:06:43

    custom bookcase with added details
    custom bookcase with added details Listing #1023 Listed on: 2008-01-21 13:27:59

    Custom Maple Armoire stained Walnut
    Custom Maple Armoire stained Walnut Listing #1145 Listed on: 2008-02-23 01:34:59

    CNC chair
    CNC chair Listing #161 Listed on: 2004-12-29 12:35:20

    Cherry Dining Table
    Cherry Dining Table Listing #985 Listed on: 2008-01-01 14:24:53

    White Oak and Cherry Table
    White Oak and Cherry Table Listing #540 Listed on: 2007-02-01 14:31:36

    Something normal
    Something normal Listing #1201 Listed on: 2008-03-18 19:00:08

    Cherry drop leaf table
    Cherry drop leaf table Listing #1066 Listed on: 2008-01-29 23:17:39

    Fireplace
    Fireplace Listing #466 Listed on: 2006-12-01 01:32:39

    Entry Door
    Entry Door Listing #4614 Listed on: 2015-06-23 07:30:52

    Post Modern Black Walnut Dresser/EC
    Post Modern Black Walnut Dresser/EC Listing #3417 Listed on: 2011-08-17 15:22:03

    Walnut Kitchen
    Walnut Kitchen Listing #270 Listed on: 2006-01-12 19:03:53

    White oak vanity
    White oak vanity Listing #581 Listed on: 2007-02-20 07:55:31

    Oma's puzzle
    Oma's puzzle Listing #617 Listed on: 2007-03-24 03:42:32

    Nest box for blue tits
    Nest box for blue tits Listing #1112 Listed on: 2008-02-13 04:41:58

    Classical chair
    Classical chair Listing #382 Listed on: 2006-07-19 15:28:14

    Old World Desk/Credenza
    Old World Desk/Credenza Listing #994 Listed on: 2008-01-06 11:00:19

    Lots of Neon
    Lots of Neon Listing #170 Listed on: 2005-02-11 06:08:58

    Custom Sofa Table
    Custom Sofa Table Listing #1142 Listed on: 2008-02-23 01:26:05

    Wood plate
    Wood plate Listing #513 Listed on: 2007-01-19 21:18:08

    medicine cabinet
    medicine cabinet Listing #371 Listed on: 2006-07-03 19:42:05

    Den
    Den Listing #911 Listed on: 2007-11-06 15:42:38

    High end kitchen
    High end kitchen Listing #523 Listed on: 2007-01-24 16:45:24

    mahogany victorian doors
    mahogany victorian doors Listing #1188 Listed on: 2008-03-16 21:35:26

    Twisted sister (mahogany)
    Twisted sister (mahogany) Listing #970 Listed on: 2007-12-23 15:58:50

    Entertainment cabinet
    Entertainment cabinet Listing #1015 Listed on: 2008-01-16 20:44:23

    Custom Cherry Coffee Table
    Custom Cherry Coffee Table Listing #1182 Listed on: 2008-03-14 23:06:16

    Custom Walnut Table with Chairs
    Custom Walnut Table with Chairs Listing #1226 Listed on: 2008-03-31 23:29:02

    Rocking bench
    Rocking bench Listing #196 Listed on: 2005-05-29 23:19:29

    Custom Wood Bench
    Custom Wood Bench Listing #1144 Listed on: 2008-02-23 01:32:09

    Walnut cabinet
    Walnut cabinet Listing #1052 Listed on: 2008-01-28 11:17:41

    some of what i do
    some of what i do Listing #370 Listed on: 2006-07-02 22:32:31

    Stehpult
    Stehpult Listing #618 Listed on: 2007-03-24 03:46:10

    Mantel
    Mantel Listing #656 Listed on: 2007-04-17 06:18:19

    Large bookshelf
    Large bookshelf Listing #588 Listed on: 2007-02-28 06:52:14

    Cherry Game Table
    Cherry Game Table Listing #1011 Listed on: 2008-01-16 20:18:16

    Round Table
    Round Table Listing #554 Listed on: 2007-02-03 22:44:28

    Display Cabinet
    Display Cabinet Listing #473 Listed on: 2006-12-05 05:35:39

    SURF BOARD CABINET
    SURF BOARD CABINET Listing #695 Listed on: 2007-05-17 08:26:12

    A 90 degree stile
    A 90 degree stile Listing #107 Listed on: 2004-01-12 09:48:24

    Lotus Breakfast Table
    Lotus Breakfast Table Listing #631 Listed on: 2007-04-05 15:56:33

    Stairs
    Stairs Listing #878 Listed on: 2007-10-09 22:44:43

    Guitars
    Guitars Listing #456 Listed on: 2006-11-15 16:29:57

    Cherry Book case
    Cherry Book case Listing #989 Listed on: 2008-01-02 21:20:32

    Pine Kitchen
    Pine Kitchen Listing #205 Listed on: 2005-06-22 13:30:17

    Archives
    Archives Listing #828 Listed on: 2007-08-23 09:23:49

    Walnut chair
    Walnut chair Listing #553 Listed on: 2007-02-03 22:41:37

    Cabinetry
    Cabinetry Listing #4871 Listed on: 2017-04-06 17:54:49

    Walnut flame birch tansu modules
    Walnut flame birch tansu modules Listing #2806 Listed on: 2010-06-29 10:55:22

    My log furniture
    My log furniture Listing #5011 Listed on: 2018-05-15 12:14:53

    21' Steeple Farmingdale Maine
    21' Steeple Farmingdale Maine Listing #3620 Listed on: 2011-11-27 07:57:19

    rustic furniture
    rustic furniture Listing #2451 Listed on: 2009-12-19 21:32:32

    shinto Walnut Wood-Matrix Media Cabinet
    shinto Walnut Wood-Matrix Media Cabinet Listing #3862 Listed on: 2012-04-26 22:16:34

    Curved coffee bar with solid laminated top
    Curved coffee bar with solid laminated top Listing #5123 Listed on: 2019-12-02 14:24:38

    Creating a Custom Frame
    Creating a Custom Frame Listing #2339 Listed on: 2009-10-15 10:13:54

    Burnt Dining Table Restoration
    Burnt Dining Table Restoration Listing #3347 Listed on: 2011-06-12 15:48:07

    A Couple Of Projects
    A Couple Of Projects Listing #4517 Listed on: 2015-01-31 10:35:44

    Walnut Screen Doors
    Walnut Screen Doors Listing #4854 Listed on: 2017-02-16 11:26:54

    Make Money Skateboard Long Board
    Make Money Skateboard Long Board Listing #3673 Listed on: 2012-01-03 12:39:53

    Salish Sea Yachts IS48 Interior Build
    Salish Sea Yachts IS48 Interior Build Listing #3641 Listed on: 2011-12-08 00:10:30

    Farmhouse kitchen
    Farmhouse kitchen Listing #4863 Listed on: 2017-03-15 22:23:32

    Custom china cabinet/ serving station
    Custom china cabinet/ serving station Listing #5157 Listed on: 2020-02-09 16:03:14

    Wood,Steel and Tooled Leather
    Wood,Steel and Tooled Leather Listing #1622 Listed on: 2008-12-09 12:41:31

    Chairmaking
    Chairmaking Listing #1285 Listed on: 2008-05-12 14:10:56

    Low Modern Wenge Chest of Drawers
    Low Modern Wenge Chest of Drawers Listing #3882 Listed on: 2012-05-26 19:42:59

    Pedestrian Bridge
    Pedestrian Bridge Listing #4115 Listed on: 2013-04-26 15:14:18

    Jewelry Chests
    Jewelry Chests Listing #2982 Listed on: 2010-11-25 19:05:26

    Cabinet Refinishing projects
    Cabinet Refinishing projects Listing #3270 Listed on: 2011-04-23 14:02:05

    Some pictures of my work
    Some pictures of my work Listing #1876 Listed on: 2009-02-20 06:57:20

    Raised Ellipse Doors
    Raised Ellipse Doors Listing #2484 Listed on: 2009-12-31 21:15:46

    Hallway Table
    Hallway Table Listing #5286 Listed on: 2022-07-24 15:27:14

    Steam Bending
    Steam Bending Listing #1318 Listed on: 2008-06-15 16:48:06

    Northbrook Kitchen Remodeling Project
    Northbrook Kitchen Remodeling Project Listing #4075 Listed on: 2013-03-09 22:44:48

    Improving a Fireplace Wall With Cabinetry
    Improving a Fireplace Wall With Cabinetry Listing #3181 Listed on: 2011-03-02 20:27:02

    Recycled Barn
    Recycled Barn Listing #3299 Listed on: 2011-05-15 23:57:30

    Merchandise Mart Chicago Showroom
    Merchandise Mart Chicago Showroom Listing #5055 Listed on: 2018-12-26 18:07:24

    Round Staircase and Paneling
    Round Staircase and Paneling Listing #3729 Listed on: 2012-02-10 12:11:47

    Guitar Stand with Metal Forging and Embossed Leather
    Guitar Stand with Metal Forging and Embossed Leather Listing #4288 Listed on: 2013-12-19 11:06:22

    Tewksburry 100 year old Apple Orchard Harvest
    Tewksburry 100 year old Apple Orchard Harvest Listing #2776 Listed on: 2010-06-05 21:45:31

    Children's museum
    Children's museum Listing #2637 Listed on: 2010-03-12 18:49:28

    xxx
    xxx Listing #1717 Listed on: 2009-01-15 12:02:53

    Interior door casings/pediments and ornamental deck add-ons
    Interior door casings/pediments and ornamental deck add-ons Listing #1706 Listed on: 2009-01-14 07:47:18

    Custom Kitchen and Den
    Custom Kitchen and Den Listing #2604 Listed on: 2010-02-27 18:48:27

    Wood engraving doors
    Wood engraving doors Listing #3669 Listed on: 2011-12-25 03:39:40

    English Brown Oak Paneled Room
    English Brown Oak Paneled Room Listing #1881 Listed on: 2009-02-21 17:44:46

    Central Park Rustic Fencing
    Central Park Rustic Fencing Listing #2773 Listed on: 2010-06-05 20:58:53

    Hula Girl Surf School Sign
    Hula Girl Surf School Sign Listing #3312 Listed on: 2011-05-26 17:16:07

    Kitchen
    Kitchen Listing #4124 Listed on: 2013-05-03 17:54:16

    Large Column Carving, of 2500 B.C. Persian King
    Large Column Carving, of 2500 B.C. Persian King Listing #4057 Listed on: 2013-02-16 18:42:50

    Custom Cabinets
    Custom Cabinets Listing #4400 Listed on: 2014-05-12 08:02:40

    Circle of Life
    Circle of Life Listing #5200 Listed on: 2020-09-25 10:59:48

    Sandakan Sideboard
    Sandakan Sideboard Listing #3898 Listed on: 2012-06-07 02:55:59

    Barn Door Murphy bed with desk
    Barn Door Murphy bed with desk Listing #5399 Listed on: 2024-01-02 17:13:08

    Traditional San Fransisco Home
    Traditional San Fransisco Home Listing #2132 Listed on: 2009-06-13 02:09:35

    Traditional Custom Kitchen
    Traditional Custom Kitchen Listing #3324 Listed on: 2011-05-31 19:01:06

    Old Furniture Refurbs this year
    Old Furniture Refurbs this year Listing #2443 Listed on: 2009-12-14 11:23:21

    SS and Maple Espresso Kitchen
    SS and Maple Espresso Kitchen Listing #1270 Listed on: 2008-05-03 01:15:36

    Art Deco Breakfast Table
    Art Deco Breakfast Table Listing #3199 Listed on: 2011-03-20 20:46:39

    Old Window Replica From the Riga Tavern
    Old Window Replica From the Riga Tavern Listing #4146 Listed on: 2013-05-25 22:23:40

    Two Music Boxes: Bocote, Quilted Maple and Wenge
    Two Music Boxes: Bocote, Quilted Maple and Wenge Listing #4380 Listed on: 2014-04-02 10:11:04

    Wood and Steel
    Wood and Steel Listing #1584 Listed on: 2008-11-21 22:22:01

    Custom Kitchen / Doors hand built /Beautiful Kitchen
    Custom Kitchen / Doors hand built /Beautiful Kitchen Listing #1351 Listed on: 2008-07-12 11:32:37

    Custom Spanish Cedar Fences
    Custom Spanish Cedar Fences Listing #2893 Listed on: 2010-09-12 15:17:27

    Furniture for Palace
    Furniture for Palace Listing #3352 Listed on: 2011-06-16 00:35:30

    Sapodilla Headboard
    Sapodilla Headboard Listing #2951 Listed on: 2010-10-24 00:41:27

    "Strapped"
    "Strapped" Listing #2099 Listed on: 2009-05-17 21:06:31

    Bamboo Rocking Chair
    Bamboo Rocking Chair Listing #3886 Listed on: 2012-05-29 14:06:11

    RiverLights(tm) - Table Top and Floor Models
    RiverLights(tm) - Table Top and Floor Models Listing #3745 Listed on: 2012-02-25 22:01:06

    Heirloom Cradle
    Heirloom Cradle Listing #4104 Listed on: 2013-04-06 10:12:18

    Queen Ann Chairs
    Queen Ann Chairs Listing #3756 Listed on: 2012-03-04 03:01:52

    "Cartoon Marquetry"
    "Cartoon Marquetry" Listing #3365 Listed on: 2011-06-29 09:59:44

    20` grand banks fishing dory
    20` grand banks fishing dory Listing #1289 Listed on: 2008-05-18 20:55:02

    Betty's Desk
    Betty's Desk Listing #4034 Listed on: 2013-01-13 18:25:10

    Storage Bench Seat
    Storage Bench Seat Listing #4953 Listed on: 2017-11-19 15:39:59

    Mahogany Shutters
    Mahogany Shutters Listing #2233 Listed on: 2009-08-03 12:09:59

    pine bookcase
    pine bookcase Listing #1579 Listed on: 2008-11-20 15:57:13

    Restaurant in Quebec City
    Restaurant in Quebec City Listing #2413 Listed on: 2009-11-25 20:48:44

    White Oak Store Front
    White Oak Store Front Listing #4679 Listed on: 2015-11-07 20:03:26

    Office/Den
    Office/Den Listing #2076 Listed on: 2009-05-06 22:25:24

    Entertainment Center w/ Bi-fold Pocket Doors
    Entertainment Center w/ Bi-fold Pocket Doors Listing #2944 Listed on: 2010-10-21 15:35:01

    Painted Kitchen
    Painted Kitchen Listing #4118 Listed on: 2013-04-28 08:35:15

    Cherry Home Office Cabinets and Trim
    Cherry Home Office Cabinets and Trim Listing #3166 Listed on: 2011-02-17 10:58:42

    Carved Frame
    Carved Frame Listing #3873 Listed on: 2012-05-13 12:04:43

    Stairwell Opening & Railing
    Stairwell Opening & Railing Listing #4519 Listed on: 2015-02-04 08:45:29

    Breakfront China Hutch
    Breakfront China Hutch Listing #3095 Listed on: 2011-01-19 15:42:32

    Sapele and Big Leaf Maple TV Stand
    Sapele and Big Leaf Maple TV Stand Listing #4396 Listed on: 2014-05-05 22:39:01

    USC World Series NCAA Trophies
    USC World Series NCAA Trophies Listing #3380 Listed on: 2011-07-10 18:04:48

    Double Sided Carved Powder Room door
    Double Sided Carved Powder Room door Listing #2804 Listed on: 2010-06-28 18:21:18

    Chair
    Chair Listing #1799 Listed on: 2009-02-04 11:17:21

    Heart Pine Shutters
    Heart Pine Shutters Listing #2286 Listed on: 2009-09-10 15:27:32

    Rope Mantle w/Flanking Cabinet
    Rope Mantle w/Flanking Cabinet Listing #3378 Listed on: 2011-07-08 12:04:11

    Milling Huge Mesquite Burls
    Milling Huge Mesquite Burls Listing #3893 Listed on: 2012-06-04 15:52:19

    Custom Oak Faux Beams
    Custom Oak Faux Beams Listing #5125 Listed on: 2019-12-04 21:46:01

    Ash Book Case
    Ash Book Case Listing #1264 Listed on: 2008-04-23 20:32:11

    Kitchen
    Kitchen Listing #582 Listed on: 2007-02-20 08:02:36

    Baltic Birch Chair
    Baltic Birch Chair Listing #1759 Listed on: 2009-01-23 00:54:40

    Walnut Copper River Bridge Table
    Walnut Copper River Bridge Table Listing #4915 Listed on: 2017-07-05 02:04:31

    Pistol Display case
    Pistol Display case Listing #3200 Listed on: 2011-03-21 13:03:12

    Live Edge Slab Table
    Live Edge Slab Table Listing #4326 Listed on: 2014-01-12 23:30:04

    Migration & Blue Wave sculptures
    Migration & Blue Wave sculptures Listing #2445 Listed on: 2009-12-14 18:51:33

    Toy Shotgun
    Toy Shotgun Listing #2190 Listed on: 2009-07-09 00:27:18

    Quilted Maple Arts and Crafts Sideboard/Buffet
    Quilted Maple Arts and Crafts Sideboard/Buffet Listing #3936 Listed on: 2012-07-18 22:41:17

    Quarter Sawn Oak Murphy Bed
    Quarter Sawn Oak Murphy Bed Listing #1630 Listed on: 2008-12-15 05:53:37

    Walnut Burl and Maple Keepsake Box
    Walnut Burl and Maple Keepsake Box Listing #2924 Listed on: 2010-09-30 21:56:18

    Strip & Refinishing the RITZ CARLTON Atlanta GA
    Strip & Refinishing the RITZ CARLTON Atlanta GA Listing #2181 Listed on: 2009-07-03 09:19:46

    Office Desk
    Office Desk Listing #2899 Listed on: 2010-09-17 00:08:02

    Five foot Galley Rail Shelf
    Five foot Galley Rail Shelf Listing #4325 Listed on: 2014-01-10 16:24:55

    Curly cherry bed and end tables
    Curly cherry bed and end tables Listing #1969 Listed on: 2009-03-23 17:41:17

    Dinning Chairs
    Dinning Chairs Listing #1955 Listed on: 2009-03-14 18:24:00

    Unique Hall/Entry Table
    Unique Hall/Entry Table Listing #2995 Listed on: 2010-12-02 00:10:35

    9' Nonagonal Conference Table
    9' Nonagonal Conference Table Listing #2385 Listed on: 2009-11-14 12:58:50

    w.oak and sapeele box w/ hinged lid
    w.oak and sapeele box w/ hinged lid Listing #1672 Listed on: 2008-12-31 15:28:27

    Child size Log & Slab FarmTable & Stools
    Child size Log & Slab FarmTable & Stools Listing #1425 Listed on: 2008-08-24 21:41:29

    Rift Walnut Bed Side End Tables
    Rift Walnut Bed Side End Tables Listing #2197 Listed on: 2009-07-14 11:25:16

    Custom Bookcases
    Custom Bookcases Listing #1568 Listed on: 2008-11-14 09:22:25

    UMBC Athletic Dept Trophy Case
    UMBC Athletic Dept Trophy Case Listing #2424 Listed on: 2009-12-02 18:30:30

    Walnut Kitchen
    Walnut Kitchen Listing #2897 Listed on: 2010-09-15 00:56:51

    Shavehorse
    Shavehorse Listing #1325 Listed on: 2008-06-21 18:55:16

    Blanket Chest in Mahogany, Walnut and Ebony
    Blanket Chest in Mahogany, Walnut and Ebony Listing #2927 Listed on: 2010-10-02 11:52:32

    Mantle Clocks
    Mantle Clocks Listing #1262 Listed on: 2008-04-23 19:48:28

    Re-claimed cherry table w/ drawers
    Re-claimed cherry table w/ drawers Listing #2434 Listed on: 2009-12-08 18:23:12

    Bed Head Board
    Bed Head Board Listing #2632 Listed on: 2010-03-09 22:40:58

    Cherry Electronics Cabinet
    Cherry Electronics Cabinet Listing #1908 Listed on: 2009-03-01 15:51:58

    Walnut and Inlaid Slate Coffee/End Table
    Walnut and Inlaid Slate Coffee/End Table Listing #4534 Listed on: 2015-02-28 15:20:45

    Decorative Tables
    Decorative Tables Listing #2390 Listed on: 2009-11-19 19:06:15

    Bar & Restaurant Project Millwork Chicago
    Bar & Restaurant Project Millwork Chicago Listing #5099 Listed on: 2019-09-14 13:18:28

    Walnut fireplace surround
    Walnut fireplace surround Listing #5411 Listed on: 2024-01-30 11:57:48

    Natural Bamboo Kitchen
    Natural Bamboo Kitchen Listing #4116 Listed on: 2013-04-27 07:45:31

    Rustic Style Red Cedar Cabin Size LivingRoom Set
    Rustic Style Red Cedar Cabin Size LivingRoom Set Listing #2584 Listed on: 2010-02-18 13:08:44

    Ottoman Tray
    Ottoman Tray Listing #4192 Listed on: 2013-08-19 14:37:27

    "Confluence" dining table
    "Confluence" dining table Listing #2360 Listed on: 2009-10-30 18:50:50

    Ultra Modern TV Unit
    Ultra Modern TV Unit Listing #3034 Listed on: 2011-01-07 17:09:44

    Sculpted Seat Bar Stool
    Sculpted Seat Bar Stool Listing #4145 Listed on: 2013-05-21 18:16:56

    Conoid Chairs
    Conoid Chairs Listing #4967 Listed on: 2017-12-16 18:05:05

    "Meander", dyed resin in pine, "River Lamp"
    "Meander", dyed resin in pine, "River Lamp" Listing #2361 Listed on: 2009-10-30 18:55:18

    Commerce Club Server's Cabinet
    Commerce Club Server's Cabinet Listing #2486 Listed on: 2010-01-01 12:06:37

    Radius Island
    Radius Island Listing #1813 Listed on: 2009-02-09 14:19:12

    Custom Guitar Solid Wood Inlay
    Custom Guitar Solid Wood Inlay Listing #3945 Listed on: 2012-08-05 22:16:00

    Foyer Rehab
    Foyer Rehab Listing #2025 Listed on: 2009-04-13 23:33:50

    RIBBED SEAT
    RIBBED SEAT Listing #1390 Listed on: 2008-07-31 10:31:26

    Walnut Side Table
    Walnut Side Table Listing #2890 Listed on: 2010-09-10 21:47:31

    Another Boardroom Table
    Another Boardroom Table Listing #3614 Listed on: 2011-11-24 13:54:18

    Vanity
    Vanity Listing #2356 Listed on: 2009-10-29 11:31:59

    Koa Taro Leaf Model
    Koa Taro Leaf Model Listing #2284 Listed on: 2009-09-09 14:52:46

    Exagonal walnut table with chairs
    Exagonal walnut table with chairs Listing #2506 Listed on: 2010-01-09 18:14:41

    Bench For Kitchen Addition
    Bench For Kitchen Addition Listing #2428 Listed on: 2009-12-03 19:23:25

    Walnut Storage Unit
    Walnut Storage Unit Listing #2133 Listed on: 2009-06-13 10:03:32

    Bedroom Suite
    Bedroom Suite Listing #2201 Listed on: 2009-07-24 18:47:04

    Vanity Espresso Contemporary Style
    Vanity Espresso Contemporary Style Listing #2895 Listed on: 2010-09-13 01:04:15

    Bathroom Vanity
    Bathroom Vanity Listing #3892 Listed on: 2012-06-03 20:00:51

    Maple Vanitys
    Maple Vanitys Listing #2439 Listed on: 2009-12-12 10:24:05

    Goddard/Townsend Tea Table
    Goddard/Townsend Tea Table Listing #3868 Listed on: 2012-05-01 16:12:42

    Hope Chest
    Hope Chest Listing #4189 Listed on: 2013-08-18 12:56:00

    Solid Surface Desk Finger Joint
    Solid Surface Desk Finger Joint Listing #3107 Listed on: 2011-01-23 19:45:03

    tusk tenon cherry bookcase
    tusk tenon cherry bookcase Listing #1748 Listed on: 2009-01-21 19:12:51

    Poor Man's Ruhlmann
    Poor Man's Ruhlmann Listing #1732 Listed on: 2009-01-19 19:14:11

    Art Deco Chiffonnier
    Art Deco Chiffonnier Listing #3957 Listed on: 2012-08-28 17:40:55

    Rift Oak Bath Cabinets
    Rift Oak Bath Cabinets Listing #2545 Listed on: 2010-01-31 15:00:26

    Modern Loft Kitchen
    Modern Loft Kitchen Listing #4501 Listed on: 2014-12-13 14:07:31

    "All Who Wander" Main Entry Door
    "All Who Wander" Main Entry Door Listing #3994 Listed on: 2012-11-10 10:48:34

    Jewelry Box
    Jewelry Box Listing #2316 Listed on: 2009-09-28 14:33:18

    High End Kitchen
    High End Kitchen Listing #1652 Listed on: 2008-12-25 12:55:02

    Sculpted Bench
    Sculpted Bench Listing #3938 Listed on: 2012-07-22 20:09:35

    Live Edge Claro Walnut Table
    Live Edge Claro Walnut Table Listing #4327 Listed on: 2014-01-13 23:48:34

    Luke's Custom Woodworking
    Luke's Custom Woodworking Listing #3462 Listed on: 2011-10-10 17:08:47

    Slab Sawing
    Slab Sawing Listing #3974 Listed on: 2012-09-23 14:09:56

    Real Size Wooden Replica of the TS55
    Real Size Wooden Replica of the TS55 Listing #3609 Listed on: 2011-11-22 08:03:37

    Birds Eye Maple and Black Walnut Chest
    Birds Eye Maple and Black Walnut Chest Listing #4176 Listed on: 2013-08-03 07:45:58

    Tarantula Dining Set
    Tarantula Dining Set Listing #3391 Listed on: 2011-07-20 17:13:17

    curved walnut console and end table
    curved walnut console and end table Listing #1500 Listed on: 2008-10-21 14:53:45

    Quarter Sawn White Oak / Mahogany Coffee Table
    Quarter Sawn White Oak / Mahogany Coffee Table Listing #1625 Listed on: 2008-12-13 14:12:53

    Sapelle'/Mahogany Table
    Sapelle'/Mahogany Table Listing #1624 Listed on: 2008-12-13 14:00:48

    Solid Walnut Table with Live Edge
    Solid Walnut Table with Live Edge Listing #3379 Listed on: 2011-07-10 02:28:47

    Shaker style Jewelry Armoire
    Shaker style Jewelry Armoire Listing #2702 Listed on: 2010-04-15 20:57:18

    California Old Growth Redwood Doors
    California Old Growth Redwood Doors Listing #3281 Listed on: 2011-04-28 03:12:05

    Hand Carved Entry Door
    Hand Carved Entry Door Listing #1374 Listed on: 2008-07-19 23:47:21

    Pandora's Box
    Pandora's Box Listing #1545 Listed on: 2008-11-08 23:01:24

    Birds Eye Maple and Walnut Nightstand
    Birds Eye Maple and Walnut Nightstand Listing #4174 Listed on: 2013-07-22 21:45:43

    Gazebo, Pergola, Porch and Custom Columns
    Gazebo, Pergola, Porch and Custom Columns Listing #3453 Listed on: 2011-09-30 11:37:09

    hickory kitchen
    hickory kitchen Listing #1782 Listed on: 2009-01-29 07:43:06

    Display case
    Display case Listing #1284 Listed on: 2008-05-12 00:31:12

    Powder room sink base
    Powder room sink base Listing #1383 Listed on: 2008-07-26 23:28:09

    African Mahogany Wall
    African Mahogany Wall Listing #1895 Listed on: 2009-02-26 11:13:09

    MAN'S DEGREDATION OF MAN
    MAN'S DEGREDATION OF MAN Listing #1855 Listed on: 2009-02-17 08:28:58

    The Heroine Addict
    The Heroine Addict Listing #1852 Listed on: 2009-02-16 19:11:35

    Billiard Table in Reclaimed Wood
    Billiard Table in Reclaimed Wood Listing #1615 Listed on: 2008-12-03 21:02:20

    VacHoselector
    VacHoselector Listing #4866 Listed on: 2017-03-23 15:38:16

    Built-In Banquet
    Built-In Banquet Listing #2971 Listed on: 2010-11-13 14:10:28

    Custom Mahogany Exterior Door
    Custom Mahogany Exterior Door Listing #2640 Listed on: 2010-03-14 13:15:26

    Rosebowl
    Rosebowl Listing #1783 Listed on: 2009-01-29 19:41:47

    Custom Receptionist Desks
    Custom Receptionist Desks Listing #5142 Listed on: 2020-01-09 20:33:17

    Multi-purpose Mudroom Built-ins
    Multi-purpose Mudroom Built-ins Listing #5232 Listed on: 2021-06-21 00:23:03

    Custom Bath
    Custom Bath Listing #3248 Listed on: 2011-04-15 11:19:39

    Historic Boldt Castle in the 1000 Islands
    Historic Boldt Castle in the 1000 Islands Listing #2958 Listed on: 2010-10-28 08:10:26

    Curly Koa Desk
    Curly Koa Desk Listing #2974 Listed on: 2010-11-17 08:45:49

    Rocking Plane
    Rocking Plane Listing #3011 Listed on: 2010-12-15 17:41:15

    Exposed Beams
    Exposed Beams Listing #3451 Listed on: 2011-09-28 17:37:44

    Clear Maple
    Clear Maple Listing #3409 Listed on: 2011-08-09 12:22:21

    Shaker style four panel ash doors
    Shaker style four panel ash doors Listing #1487 Listed on: 2008-10-13 08:38:09

    Shaker Cupboard
    Shaker Cupboard Listing #5385 Listed on: 2023-10-24 12:05:17

    Portable Writing Desk
    Portable Writing Desk Listing #424 Listed on: 2006-10-03 11:58:56

    lacewood box with walnut inlay
    lacewood box with walnut inlay Listing #1742 Listed on: 2009-01-20 21:48:40

    Wormy Chestnut Dining Set
    Wormy Chestnut Dining Set Listing #4093 Listed on: 2013-03-22 23:20:57

    Recycled Wood Workbench
    Recycled Wood Workbench Listing #2178 Listed on: 2009-06-30 12:12:31

    Tigerwood Stairs
    Tigerwood Stairs Listing #4279 Listed on: 2013-11-27 15:28:31

    Walnut Side Table
    Walnut Side Table Listing #5205 Listed on: 2021-01-02 00:23:58

    Caithness Bench
    Caithness Bench Listing #2761 Listed on: 2010-05-29 11:24:27

    Custom Maple Kitchen
    Custom Maple Kitchen Listing #259 Listed on: 2005-12-24 13:37:53

    ArtClip3D Software
    ArtClip3D Software Listing #4390 Listed on: 2014-04-24 15:52:47

    Zen Garden Wood Sign
    Zen Garden Wood Sign Listing #3267 Listed on: 2011-04-21 14:03:46

    cherry coffee table
    cherry coffee table Listing #2507 Listed on: 2010-01-09 18:29:26

    End Grain Walnut Wood Countertop
    End Grain Walnut Wood Countertop Listing #4582 Listed on: 2015-04-18 23:14:30

    Tall Spindle Galley Wall Shelf Unit
    Tall Spindle Galley Wall Shelf Unit Listing #4323 Listed on: 2014-01-08 17:18:52

    Kitchen at Monterrey, Mexico
    Kitchen at Monterrey, Mexico Listing #1920 Listed on: 2009-03-05 15:21:13

    French Knot Floor
    French Knot Floor Listing #1761 Listed on: 2009-01-24 08:15:41

    Panel from a book rest - work in progress
    Panel from a book rest - work in progress Listing #1859 Listed on: 2009-02-17 09:05:45

    Hope Chest
    Hope Chest Listing #3969 Listed on: 2012-09-07 08:35:35

    STAIR
    STAIR Listing #4850 Listed on: 2017-02-02 09:37:20

    Curved Stem Bedside Tables
    Curved Stem Bedside Tables Listing #2579 Listed on: 2010-02-18 12:09:14

    White Oak Family Room
    White Oak Family Room Listing #4352 Listed on: 2014-02-12 11:51:40

    Round Stairs And Laminate Flooring
    Round Stairs And Laminate Flooring Listing #2978 Listed on: 2010-11-21 14:08:12

    Double oval table
    Double oval table Listing #430 Listed on: 2006-10-08 18:14:36

    pearl magnolia
    pearl magnolia Listing #1320 Listed on: 2008-06-18 14:55:25

    Hydrangea's
    Hydrangea's Listing #4665 Listed on: 2015-10-09 09:36:36

    Lilac and Walnut Shelf
    Lilac and Walnut Shelf Listing #2179 Listed on: 2009-07-02 23:03:33

    Contemporary Windsor Chair
    Contemporary Windsor Chair Listing #1421 Listed on: 2008-08-23 20:57:25

    Barley twist ottoman, walnut
    Barley twist ottoman, walnut Listing #984 Listed on: 2008-01-01 14:20:31

    Commercial Retail Project
    Commercial Retail Project Listing #3887 Listed on: 2012-05-29 14:06:59

    Cherry china cabinet
    Cherry china cabinet Listing #1821 Listed on: 2009-02-09 17:54:02

    Contemporary 4 Poster Beds
    Contemporary 4 Poster Beds Listing #164 Listed on: 2005-01-19 17:21:04

    Southern style hunt board
    Southern style hunt board Listing #4865 Listed on: 2017-03-17 15:55:38

    Pizza Sign
    Pizza Sign Listing #3707 Listed on: 2012-01-20 09:37:05

    Greene and Greene End Table
    Greene and Greene End Table Listing #3129 Listed on: 2011-01-29 18:43:15

    Acoustic Guitar Reparation
    Acoustic Guitar Reparation Listing #1431 Listed on: 2008-08-26 09:34:14

    Custom Fla Cedar entry door and trim
    Custom Fla Cedar entry door and trim Listing #4729 Listed on: 2016-02-26 12:01:00

    Spalted Oak Bench and Stool
    Spalted Oak Bench and Stool Listing #2558 Listed on: 2010-02-05 14:43:30

    Extending Dining Table
    Extending Dining Table Listing #5146 Listed on: 2020-01-20 14:37:10

    Bamboo, and cedar bar
    Bamboo, and cedar bar Listing #2000 Listed on: 2009-04-02 17:57:03

    Bookcase, Built-in Media Cabinet
    Bookcase, Built-in Media Cabinet Listing #2236 Listed on: 2009-08-03 14:50:49

    Scale Model Whitewater Dory
    Scale Model Whitewater Dory Listing #155 Listed on: 2004-11-15 22:46:14

    Solid Surface Acoustic hollowbody guitar
    Solid Surface Acoustic hollowbody guitar Listing #101 Listed on: 2003-12-31 10:46:13

    Kitchen
    Kitchen Listing #2248 Listed on: 2009-08-07 16:10:41

    Greene and Greene style bed
    Greene and Greene style bed Listing #2783 Listed on: 2010-06-14 20:30:07

    Huntboard
    Huntboard Listing #2691 Listed on: 2010-04-11 07:46:25

    Bamboo Bench
    Bamboo Bench Listing #2095 Listed on: 2009-05-13 23:44:42

    Walnut Table
    Walnut Table Listing #1392 Listed on: 2008-07-31 10:41:55

    Bazzar Chair
    Bazzar Chair Listing #3035 Listed on: 2011-01-07 22:50:06

    Traditional Cabinet Showroom at Studio
    Traditional Cabinet Showroom at Studio Listing #2754 Listed on: 2010-05-26 10:59:30

    Fireplace Wall Millwork
    Fireplace Wall Millwork Listing #2427 Listed on: 2009-12-03 19:12:57

    Custom fireplace surrounds
    Custom fireplace surrounds Listing #1526 Listed on: 2008-11-02 09:02:23

    maple and walnut table set
    maple and walnut table set Listing #310 Listed on: 2006-03-20 10:47:33

    Day Bed - Beaded Inset Design
    Day Bed - Beaded Inset Design Listing #3345 Listed on: 2011-06-07 20:22:12

    Cheers
    Cheers Listing #4608 Listed on: 2015-06-10 21:21:24

    Candy Counter
    Candy Counter Listing #4227 Listed on: 2013-09-14 11:23:07

    Walnut Nut Cracker Bowl
    Walnut Nut Cracker Bowl Listing #4512 Listed on: 2015-01-09 02:34:38

    Obeche Veneer Zoom Room Bed
    Obeche Veneer Zoom Room Bed Listing #4331 Listed on: 2014-01-26 17:23:10

    Master Remodel/Reface
    Master Remodel/Reface Listing #3637 Listed on: 2011-12-05 11:25:44

    Hickory Conference Table
    Hickory Conference Table Listing #5128 Listed on: 2019-12-17 20:04:53

    Basic Retirement Shadow Box
    Basic Retirement Shadow Box Listing #2400 Listed on: 2009-11-24 11:02:48

    Rocking Chair
    Rocking Chair Listing #1806 Listed on: 2009-02-08 17:59:56

    Bookcase White
    Bookcase White Listing #2894 Listed on: 2010-09-13 00:38:38

    Master Bath Cherry Cabinets
    Master Bath Cherry Cabinets Listing #5228 Listed on: 2021-05-12 10:32:20

    Glazed Kitchen
    Glazed Kitchen Listing #1582 Listed on: 2008-11-21 14:59:33

    Hide The Doors
    Hide The Doors Listing #4053 Listed on: 2013-02-07 23:14:05

    Burlwood veneered chessboard
    Burlwood veneered chessboard Listing #4803 Listed on: 2016-07-29 10:51:58

    Custom Bench (Recycled Wood)
    Custom Bench (Recycled Wood) Listing #1802 Listed on: 2009-02-05 21:52:24

    Custom Commercial Casework- Gloria Jeans
    Custom Commercial Casework- Gloria Jeans Listing #1080 Listed on: 2008-02-04 23:21:14

    Hand carved serving trays
    Hand carved serving trays Listing #5012 Listed on: 2018-05-17 21:20:45

    TV Stand
    TV Stand Listing #4468 Listed on: 2014-10-15 19:50:28

    Custom Inlayed Table
    Custom Inlayed Table Listing #1441 Listed on: 2008-09-06 01:45:12

    Marri coffee table and Sheoak clock
    Marri coffee table and Sheoak clock Listing #420 Listed on: 2006-09-23 04:43:09

    Miami Bamboo Kitchen
    Miami Bamboo Kitchen Listing #2675 Listed on: 2010-03-26 19:10:40

    stool
    stool Listing #1970 Listed on: 2009-03-23 22:35:32

    Bathroom vanity
    Bathroom vanity Listing #1994 Listed on: 2009-03-31 17:42:46

    Cypress Swings
    Cypress Swings Listing #3798 Listed on: 2012-03-30 09:55:07

    Wall Mounted Utility Chest
    Wall Mounted Utility Chest Listing #5361 Listed on: 2023-08-08 14:02:45

    Oriental gong stand
    Oriental gong stand Listing #1819 Listed on: 2009-02-09 16:33:24

    sideboard
    sideboard Listing #1646 Listed on: 2008-12-20 19:38:46

    Walnut-Glass Desk
    Walnut-Glass Desk Listing #2614 Listed on: 2010-02-28 10:39:36

    Music Stand
    Music Stand Listing #1699 Listed on: 2009-01-11 22:06:33

    Kitchen Cabinets
    Kitchen Cabinets Listing #5227 Listed on: 2021-05-12 10:25:02

    Oak Cedar Chest
    Oak Cedar Chest Listing #1250 Listed on: 2008-04-18 03:39:20

    Interior to new home addition.
    Interior to new home addition. Listing #2347 Listed on: 2009-10-22 10:59:03

    Curved Raised Panel Barfront
    Curved Raised Panel Barfront Listing #1090 Listed on: 2008-02-08 09:50:00

    Mahogany Library/Media unit
    Mahogany Library/Media unit Listing #664 Listed on: 2007-04-24 21:32:49

    Custom Stool Legs
    Custom Stool Legs Listing #5129 Listed on: 2019-12-17 20:08:20

    Rift Oak Cabinet Refacing
    Rift Oak Cabinet Refacing Listing #2751 Listed on: 2010-05-24 00:53:45

    Non directional stairs landing
    Non directional stairs landing Listing #1885 Listed on: 2009-02-22 17:13:33

    Garden Bench
    Garden Bench Listing #2243 Listed on: 2009-08-05 15:11:22

    Tansu Media Cabinet
    Tansu Media Cabinet Listing #1557 Listed on: 2008-11-11 12:28:03

    Dad's Sunburst Louvered Door
    Dad's Sunburst Louvered Door Listing #3722 Listed on: 2012-02-01 23:11:21

    Nested Tables
    Nested Tables Listing #2800 Listed on: 2010-06-24 16:36:16

    Fireplace Mantle Onlay
    Fireplace Mantle Onlay Listing #3975 Listed on: 2012-09-24 08:07:36

    Black Willow , White Birch, and Grapevine Chair
    Black Willow , White Birch, and Grapevine Chair Listing #3106 Listed on: 2011-01-23 00:21:27

    Continuous arm Windsor chair
    Continuous arm Windsor chair Listing #5245 Listed on: 2021-11-21 13:07:36

    Chippendale Sidechair in Walnut
    Chippendale Sidechair in Walnut Listing #4147 Listed on: 2013-05-30 06:52:47

    Walnut Countertop for Island
    Walnut Countertop for Island Listing #4939 Listed on: 2017-10-08 18:09:58

    Bent Wood Chair
    Bent Wood Chair Listing #2748 Listed on: 2010-05-20 11:05:51

    cabinet
    cabinet Listing #2442 Listed on: 2009-12-14 07:42:08

    Hand Carved Arch Top Door
    Hand Carved Arch Top Door Listing #2653 Listed on: 2010-03-17 19:32:38

    Custom Wine Cabinet
    Custom Wine Cabinet Listing #2087 Listed on: 2009-05-11 13:34:30

    boxes
    boxes Listing #1903 Listed on: 2009-03-01 10:34:24

    Classic Oak Bar
    Classic Oak Bar Listing #2836 Listed on: 2010-07-30 22:25:59

    Walnut bench
    Walnut bench Listing #426 Listed on: 2006-10-04 10:15:09

    Hepplewhite end tables
    Hepplewhite end tables Listing #988 Listed on: 2008-01-02 19:16:39

    Oak/Mesquite Star Bed
    Oak/Mesquite Star Bed Listing #1893 Listed on: 2009-02-25 13:52:24

    Ent. Center Before Paint
    Ent. Center Before Paint Listing #2546 Listed on: 2010-02-02 00:08:10

    Shaker Sewing Table
    Shaker Sewing Table Listing #2690 Listed on: 2010-04-11 07:41:26

    Elliptical Front Rift White Oak Vanity
    Elliptical Front Rift White Oak Vanity Listing #3418 Listed on: 2011-08-17 15:28:35

    Irish Table Reproduction
    Irish Table Reproduction Listing #1995 Listed on: 2009-03-31 17:56:36

    Asian inspiration
    Asian inspiration Listing #968 Listed on: 2007-12-22 00:05:55

    Cabinet
    Cabinet Listing #1884 Listed on: 2009-02-22 07:53:55

    Candlestick Holder
    Candlestick Holder Listing #2066 Listed on: 2009-05-02 08:46:23

    replica 6 tier book shelf
    replica 6 tier book shelf Listing #1767 Listed on: 2009-01-25 12:44:04

    Custom Desk Chair
    Custom Desk Chair Listing #1375 Listed on: 2008-07-19 23:53:46

    Our "Alexander" Line of cabinetry
    Our "Alexander" Line of cabinetry Listing #1249 Listed on: 2008-04-17 21:54:14

    J.Blues guitar
    J.Blues guitar Listing #179 Listed on: 2005-03-13 21:59:22

    Red oak pantry cab
    Red oak pantry cab Listing #5469 Listed on: 2025-08-24 21:45:02

    Handcrafted wooden crosses with turquoise inlay
    Handcrafted wooden crosses with turquoise inlay Listing #4807 Listed on: 2016-08-17 22:22:32

    Driveway Farm Gate
    Driveway Farm Gate Listing #2624 Listed on: 2010-03-04 11:34:29

    Rustic Cedar Bench
    Rustic Cedar Bench Listing #1327 Listed on: 2008-06-23 17:38:18

    Reading Room
    Reading Room Listing #1933 Listed on: 2009-03-08 21:54:32

    Exotic Veneer Table
    Exotic Veneer Table Listing #3026 Listed on: 2010-12-28 23:37:13

    Poplar Mantles
    Poplar Mantles Listing #4538 Listed on: 2015-03-05 09:13:16

    If you have kids
    If you have kids Listing #278 Listed on: 2006-02-03 14:41:22

    Pecan,Mesquite, Walnut door
    Pecan,Mesquite, Walnut door Listing #1917 Listed on: 2009-03-05 00:57:41

    Baseball Entertainment Center
    Baseball Entertainment Center Listing #2472 Listed on: 2009-12-24 19:04:58

    Linesberry Cart Table
    Linesberry Cart Table Listing #2448 Listed on: 2009-12-19 19:38:23

    Fly Tieing Nest of Drawers
    Fly Tieing Nest of Drawers Listing #1680 Listed on: 2009-01-03 16:53:20

    Uriel
    Uriel Listing #4602 Listed on: 2015-05-25 09:25:52

    Greene and Greene Sideboard
    Greene and Greene Sideboard Listing #3006 Listed on: 2010-12-10 12:43:17

    custom cabinet doors
    custom cabinet doors Listing #419 Listed on: 2006-09-22 12:09:46

    Chair 78
    Chair 78 Listing #4428 Listed on: 2014-07-12 19:31:03

    Maple Floors Stain Dark
    Maple Floors Stain Dark Listing #3353 Listed on: 2011-06-19 15:35:54

    shop bench
    shop bench Listing #1766 Listed on: 2009-01-25 12:35:20

    Glazed Cabinets
    Glazed Cabinets Listing #4640 Listed on: 2015-08-12 21:56:17

    Cabinet Refacing Project
    Cabinet Refacing Project Listing #1313 Listed on: 2008-06-12 00:58:37

    Fireplace/Entertainment Center
    Fireplace/Entertainment Center Listing #202 Listed on: 2005-06-21 08:25:31

    Walnut & Maple Secretary
    Walnut & Maple Secretary Listing #969 Listed on: 2007-12-22 23:45:25

    Eastern red cedar log bed
    Eastern red cedar log bed Listing #2661 Listed on: 2010-03-21 17:54:27

    Arts & Crafts style entry door
    Arts & Crafts style entry door Listing #2630 Listed on: 2010-03-06 09:42:32

    VARIOUS PROJECTS
    VARIOUS PROJECTS Listing #575 Listed on: 2007-02-17 15:15:32

    Cherry Book Cases
    Cherry Book Cases Listing #287 Listed on: 2006-02-12 20:34:34

    Ash Stairway & Rail
    Ash Stairway & Rail Listing #1929 Listed on: 2009-03-08 09:47:09

    A little ash
    A little ash Listing #1924 Listed on: 2009-03-06 19:01:48

    small walnut corner cabinet
    small walnut corner cabinet Listing #1157 Listed on: 2008-02-27 11:49:32

    Bamboo Blanket Chest
    Bamboo Blanket Chest Listing #1828 Listed on: 2009-02-12 12:07:51

    Elks Maple Bar
    Elks Maple Bar Listing #126 Listed on: 2004-04-27 19:09:15

    Maple Media Center/Electric Fireplace Surround
    Maple Media Center/Electric Fireplace Surround Listing #4366 Listed on: 2014-03-08 22:09:51

    Bed With Curvilinear Headboard
    Bed With Curvilinear Headboard Listing #2580 Listed on: 2010-02-18 12:16:19

    Cabinet Refacing-Maple Stained Cabinets
    Cabinet Refacing-Maple Stained Cabinets Listing #1475 Listed on: 2008-10-07 21:35:33

    Display Case
    Display Case Listing #2532 Listed on: 2010-01-26 16:39:15

    End Table
    End Table Listing #2358 Listed on: 2009-10-30 13:09:41

    High Gloss Cabinets
    High Gloss Cabinets Listing #1311 Listed on: 2008-06-12 00:45:41

    Just starting
    Just starting Listing #5420 Listed on: 2024-04-15 17:31:08

    Custom Oak Mantle
    Custom Oak Mantle Listing #4399 Listed on: 2014-05-07 20:40:13

    Carved Sign
    Carved Sign Listing #479 Listed on: 2006-12-12 14:36:12

    Mahogany Library
    Mahogany Library Listing #3047 Listed on: 2011-01-12 08:58:03

    Floating Bamboo Vanity
    Floating Bamboo Vanity Listing #2879 Listed on: 2010-09-02 01:30:08

    Teak/Walnut Dresser Top for Geoff
    Teak/Walnut Dresser Top for Geoff Listing #2566 Listed on: 2010-02-12 15:36:12

    Shaker Bed and Nightstand Set
    Shaker Bed and Nightstand Set Listing #1550 Listed on: 2008-11-10 19:37:46

    Coffee Table Mahogany and Walnut
    Coffee Table Mahogany and Walnut Listing #2304 Listed on: 2009-09-18 10:32:22

    Media Wall Unit #2
    Media Wall Unit #2 Listing #1939 Listed on: 2009-03-10 19:37:17

    Some Projects
    Some Projects Listing #2293 Listed on: 2009-09-14 19:32:52

    NEW - OLD BAR
    NEW - OLD BAR Listing #1000 Listed on: 2008-01-08 16:24:00

    Bar with built in cigar case
    Bar with built in cigar case Listing #344 Listed on: 2006-04-28 07:01:41

    18 Wheeler Savings Bank
    18 Wheeler Savings Bank Listing #2467 Listed on: 2009-12-24 18:14:35

    Curly Cherry Drop-Leaf Table
    Curly Cherry Drop-Leaf Table Listing #234 Listed on: 2005-10-03 22:39:01

    Great Room
    Great Room Listing #1935 Listed on: 2009-03-08 21:56:58

    Walnut Kitchen
    Walnut Kitchen Listing #4592 Listed on: 2015-05-15 18:56:00

    Girly Bunkbed
    Girly Bunkbed Listing #2478 Listed on: 2009-12-26 14:17:29

    Maple doors
    Maple doors Listing #5119 Listed on: 2019-11-24 12:50:02

    contemporary doug fir armoire/closet
    contemporary doug fir armoire/closet Listing #1010 Listed on: 2008-01-16 20:09:08

    Wood Shed
    Wood Shed Listing #4032 Listed on: 2013-01-10 14:51:08

    Fireplace & entertainment Center
    Fireplace & entertainment Center Listing #218 Listed on: 2005-07-18 09:41:50

    Doors by Mike
    Doors by Mike Listing #2523 Listed on: 2010-01-20 03:37:42

    Walnut Mantel with Hand Carved panels
    Walnut Mantel with Hand Carved panels Listing #980 Listed on: 2008-01-01 11:51:52

    Wood finishing and restoration
    Wood finishing and restoration Listing #3464 Listed on: 2011-10-11 11:20:34

    Tool Box
    Tool Box Listing #2296 Listed on: 2009-09-16 11:09:22

    Sideboard
    Sideboard Listing #2365 Listed on: 2009-11-02 11:17:07

    shaker buffet hutch
    shaker buffet hutch Listing #1863 Listed on: 2009-02-17 15:04:57

    Deco coffee table
    Deco coffee table Listing #403 Listed on: 2006-08-20 16:33:09

    FINGER COFFEE TABLE
    FINGER COFFEE TABLE Listing #1391 Listed on: 2008-07-31 10:39:29

    Nouveau Inspired Portrait Display
    Nouveau Inspired Portrait Display Listing #437 Listed on: 2006-10-28 09:20:11

    Daughters Bunkbed
    Daughters Bunkbed Listing #3677 Listed on: 2012-01-04 14:55:19

    window trim
    window trim Listing #747 Listed on: 2007-06-19 23:00:45

    Arch Top Cabinet/Book Shelf
    Arch Top Cabinet/Book Shelf Listing #4796 Listed on: 2016-07-14 18:26:05

    Wooden Stool
    Wooden Stool Listing #1440 Listed on: 2008-09-06 01:39:43

    Cherry entertainment center
    Cherry entertainment center Listing #428 Listed on: 2006-10-06 22:56:43

    Trophy Case
    Trophy Case Listing #2335 Listed on: 2009-10-10 10:43:40

    spalted maple platform rocker
    spalted maple platform rocker Listing #251 Listed on: 2005-12-01 10:28:01

    Custom Maple Desk stained Dark Wenge
    Custom Maple Desk stained Dark Wenge Listing #1147 Listed on: 2008-02-23 01:41:34

    bed
    bed Listing #2595 Listed on: 2010-02-24 18:20:23

    Espresso Oak Armoire
    Espresso Oak Armoire Listing #395 Listed on: 2006-08-07 00:21:57

    Bookcase & Bench Seat for Loft apartment
    Bookcase & Bench Seat for Loft apartment Listing #721 Listed on: 2007-06-06 17:28:44

    Walnut Wine Rack
    Walnut Wine Rack Listing #3698 Listed on: 2012-01-16 09:13:03

    Builit-in Entertainment center
    Builit-in Entertainment center Listing #1989 Listed on: 2009-03-29 19:59:05

    Billard room
    Billard room Listing #1934 Listed on: 2009-03-08 21:55:30

    Gwynned Mercy Academy
    Gwynned Mercy Academy Listing #119 Listed on: 2004-03-17 07:21:03

    Entertainment Center
    Entertainment Center Listing #168 Listed on: 2005-01-21 12:50:22

    Bottom Up
    Bottom Up Listing #4091 Listed on: 2013-03-22 20:12:36

    New Remodel
    New Remodel Listing #2416 Listed on: 2009-11-26 11:11:43

    Staircases
    Staircases Listing #3601 Listed on: 2011-11-19 14:27:31

    kitchen
    kitchen Listing #216 Listed on: 2005-07-16 00:33:10

    LOUNGE BAR
    LOUNGE BAR Listing #1982 Listed on: 2009-03-27 09:38:34

    Bottom drawers
    Bottom drawers Listing #1437 Listed on: 2008-09-03 00:28:49

    Contemporary Kitchen in Rift Oak
    Contemporary Kitchen in Rift Oak Listing #1077 Listed on: 2008-02-04 22:39:57

    Church Door
    Church Door Listing #955 Listed on: 2007-12-14 12:43:21

    Toddler table and chairs
    Toddler table and chairs Listing #416 Listed on: 2006-09-09 23:16:13

    White Kitchen
    White Kitchen Listing #1206 Listed on: 2008-03-20 19:05:57

    Canopy Bed
    Canopy Bed Listing #212 Listed on: 2005-07-02 14:20:11

    Monopoly anyone?
    Monopoly anyone? Listing #1004 Listed on: 2008-01-09 18:34:07

    Espresso Armoire
    Espresso Armoire Listing #282 Listed on: 2006-02-05 10:33:29

    Espresso Oak Table Base
    Espresso Oak Table Base Listing #396 Listed on: 2006-08-07 00:29:31

    Baby's room
    Baby's room Listing #478 Listed on: 2006-12-12 13:18:17

    display cabinets
    display cabinets Listing #372 Listed on: 2006-07-03 23:42:15

    Office Cabinets
    Office Cabinets Listing #898 Listed on: 2007-10-24 18:22:23

    Antique Look Entertainment Center
    Antique Look Entertainment Center Listing #156 Listed on: 2004-11-21 19:04:42

    farm table
    farm table Listing #952 Listed on: 2007-12-13 22:50:22

    built-in desk
    built-in desk Listing #145 Listed on: 2004-09-02 01:50:42

    Wooden Book
    Wooden Book Listing #1130 Listed on: 2008-02-19 10:27:21

    Vanity with towers
    Vanity with towers Listing #281 Listed on: 2006-02-05 10:21:36

    Walnut and Anigre' Mantle
    Walnut and Anigre' Mantle Listing #1037 Listed on: 2008-01-23 11:13:37

    Carved Bear
    Carved Bear Listing #243 Listed on: 2005-11-06 17:13:04

    Spiral Stairway Treads
    Spiral Stairway Treads Listing #718 Listed on: 2007-06-06 11:14:18

    mantle
    mantle Listing #746 Listed on: 2007-06-18 23:29:31

    Arts and crafts hutch
    Arts and crafts hutch Listing #1050 Listed on: 2008-01-27 10:23:45

    Master bath vanity
    Master bath vanity Listing #947 Listed on: 2007-12-11 19:55:02

    Curved Work
    Curved Work Listing #457 Listed on: 2006-11-16 18:52:40

    Custom Cherry Armoire
    Custom Cherry Armoire Listing #1146 Listed on: 2008-02-23 01:37:50

    Alder Kitchen Island
    Alder Kitchen Island Listing #1158 Listed on: 2008-02-27 19:37:04

    Wet Bar for wine room
    Wet Bar for wine room Listing #960 Listed on: 2007-12-17 22:08:30

    screw table
    screw table Listing #399 Listed on: 2006-08-12 16:20:48

    TOSCA RESTAURANT
    TOSCA RESTAURANT Listing #508 Listed on: 2007-01-16 18:12:22

    Hepplewhite Table
    Hepplewhite Table Listing #1208 Listed on: 2008-03-21 07:21:03

    Burl buffet hutch
    Burl buffet hutch Listing #1053 Listed on: 2008-01-28 11:24:09

    Select Alder Door
    Select Alder Door Listing #1184 Listed on: 2008-03-14 23:14:13

    front door
    front door Listing #284 Listed on: 2006-02-07 00:13:58

    Bookcase
    Bookcase Listing #351 Listed on: 2006-05-18 08:55:44

    Rift Oak Kitchens
    Rift Oak Kitchens Listing #1169 Listed on: 2008-03-01 10:28:46

    Half Round Window
    Half Round Window Listing #1209 Listed on: 2008-03-21 07:31:33

    garden bench
    garden bench Listing #274 Listed on: 2006-01-23 08:28:13

    Projects
    Projects Listing #659 Listed on: 2007-04-20 14:24:29

    Conference Table
    Conference Table Listing #248 Listed on: 2005-11-25 23:22:39

    Splines
    Splines Listing #1219 Listed on: 2008-03-30 12:43:02

    TV Stand
    TV Stand Listing #154 Listed on: 2004-11-07 15:47:56

    Yale center for British Art
    Yale center for British Art Listing #204 Listed on: 2005-06-22 13:19:35

    marquetry of Venice
    marquetry of Venice Listing #682 Listed on: 2007-05-08 09:52:54

    birch panel bed
    birch panel bed Listing #384 Listed on: 2006-07-22 20:18:36

    Maple Melamine Wine Tower
    Maple Melamine Wine Tower Listing #414 Listed on: 2006-09-08 21:32:45

    ipe staircase
    ipe staircase Listing #450 Listed on: 2006-11-08 04:25:30

    Distressed cabinets
    Distressed cabinets Listing #1137 Listed on: 2008-02-21 19:23:15

    Upholstered Window Seat
    Upholstered Window Seat Listing #149 Listed on: 2004-10-01 11:10:13

    Custom Kitchens
    Custom Kitchens Listing #774 Listed on: 2007-07-12 16:02:50

    More Marquetry Tables
    More Marquetry Tables Listing #1185 Listed on: 2008-03-16 13:56:44

    Alder Night Stand
    Alder Night Stand Listing #431 Listed on: 2006-10-09 15:35:04

    open and closed
    open and closed Listing #412 Listed on: 2006-09-08 02:59:19

    Dowry chest for charity
    Dowry chest for charity Listing #610 Listed on: 2007-03-21 21:23:42

    Green and green desk
    Green and green desk Listing #1055 Listed on: 2008-01-28 22:22:18

    Shoji Closet Doors
    Shoji Closet Doors Listing #413 Listed on: 2006-09-08 21:26:47

    Headboard
    Headboard Listing #133 Listed on: 2004-07-04 17:37:48

    Arts and crafts dresser
    Arts and crafts dresser Listing #1056 Listed on: 2008-01-28 22:34:15

    Attic Base
    Attic Base Listing #1210 Listed on: 2008-03-21 07:33:12

    Oak doors
    Oak doors Listing #257 Listed on: 2005-12-22 22:09:41

    Walnut louver doors
    Walnut louver doors Listing #436 Listed on: 2006-10-24 22:28:33

    American Vision Cabinets
    American Vision Cabinets Listing #1027 Listed on: 2008-01-21 20:28:13

    recent projects
    recent projects Listing #551 Listed on: 2007-02-03 19:07:04

    Stall Partitions
    Stall Partitions Listing #978 Listed on: 2007-12-31 15:41:47

    Cherry End Table
    Cherry End Table Listing #293 Listed on: 2006-02-24 11:58:08

    Mahogany table
    Mahogany table Listing #552 Listed on: 2007-02-03 22:34:57

    Seklergate
    Seklergate Listing #504 Listed on: 2007-01-13 01:54:31

    redwood deck
    redwood deck Listing #1083 Listed on: 2008-02-05 14:03:59

    Window trim carvings
    Window trim carvings Listing #1222 Listed on: 2008-03-30 16:45:32

    Shop Drawing Samples
    Shop Drawing Samples Listing #4516 Listed on: 2015-01-25 07:04:58

    Furniture fronts, beds and MDF doors
    Furniture fronts, beds and MDF doors Listing #5196 Listed on: 2020-09-11 00:05:24

    Shaker cherry office
    Shaker cherry office Listing #2081 Listed on: 2009-05-08 10:38:52

    Small Home Bar Designs
    Small Home Bar Designs Listing #4923 Listed on: 2017-08-02 13:14:10

    Interior Design for Bedrooms
    Interior Design for Bedrooms Listing #4940 Listed on: 2017-10-08 18:13:46

    Herman Miller Eames chair repairs
    Herman Miller Eames chair repairs Listing #2012 Listed on: 2009-04-08 11:55:50

    Ceiling Beam Designs - Frame and Panel
    Ceiling Beam Designs - Frame and Panel Listing #4774 Listed on: 2016-07-05 12:44:47

    Plywood Door for Glass
    Plywood Door for Glass Listing #3468 Listed on: 2011-10-17 11:35:56

    Vanity Revamp
    Vanity Revamp Listing #3944 Listed on: 2012-08-04 01:03:35

    Bathroom Remodel
    Bathroom Remodel Listing #2946 Listed on: 2010-10-21 16:47:26

    Porch Swings
    Porch Swings Listing #3768 Listed on: 2012-03-10 01:34:19

    Farm House Remodel
    Farm House Remodel Listing #2945 Listed on: 2010-10-21 15:49:00

    Bamboo Project
    Bamboo Project Listing #4463 Listed on: 2014-10-07 23:05:15

    Bubinga (Guibourtia tessmannii) Country table
    Bubinga (Guibourtia tessmannii) Country table Listing #4844 Listed on: 2017-01-10 12:37:18

    Wood-Matrix Demilunes
    Wood-Matrix Demilunes Listing #3935 Listed on: 2012-07-18 22:11:02

    Custom Outdoor Patio Loveseats
    Custom Outdoor Patio Loveseats Listing #5077 Listed on: 2019-05-02 12:41:40

    WINDOWS RESTORATION
    WINDOWS RESTORATION Listing #1854 Listed on: 2009-02-17 08:21:14

    Decorative Interior Wall Panels - Wainscot
    Decorative Interior Wall Panels - Wainscot Listing #4770 Listed on: 2016-06-25 14:39:22

    Rift White House
    Rift White House Listing #3431 Listed on: 2011-09-10 13:05:05

    Home Library Furniture – Custom Bookshelves and Storage
    Home Library Furniture – Custom Bookshelves and Storage Listing #4800 Listed on: 2016-07-20 18:17:20

    Best Kitchen Island with Seating
    Best Kitchen Island with Seating Listing #5009 Listed on: 2018-04-30 14:04:10

    Ipe Skydeck
    Ipe Skydeck Listing #3900 Listed on: 2012-06-08 09:33:19

    White Oak Window Blinds
    White Oak Window Blinds Listing #5390 Listed on: 2023-11-08 16:17:34

    Custom Hardwood Canes
    Custom Hardwood Canes Listing #3956 Listed on: 2012-08-16 16:16:11

    Snow Phoenix Piano Puzzle Chest
    Snow Phoenix Piano Puzzle Chest Listing #4557 Listed on: 2015-03-28 17:12:58

    Extra Large Blanket Chest
    Extra Large Blanket Chest Listing #2502 Listed on: 2010-01-07 10:55:35

    my history
    my history Listing #5452 Listed on: 2025-01-23 17:47:44

    Fireplace Bookshelves with Cord Wood Storage
    Fireplace Bookshelves with Cord Wood Storage Listing #3434 Listed on: 2011-09-18 17:23:35

    Lake House
    Lake House Listing #2071 Listed on: 2009-05-04 14:36:18

    Ironic Cherry Cabinet
    Ironic Cherry Cabinet Listing #3164 Listed on: 2011-02-13 15:04:49

    Hickory Kitchen
    Hickory Kitchen Listing #4262 Listed on: 2013-10-06 15:19:14

    Vertical Grain Doug Fir Entertainment Center
    Vertical Grain Doug Fir Entertainment Center Listing #2816 Listed on: 2010-07-13 07:57:39

    Tables
    Tables Listing #4919 Listed on: 2017-07-17 15:25:29

    Eero Saarinen Modern Chairs - Leather reupholstery
    Eero Saarinen Modern Chairs - Leather reupholstery Listing #2024 Listed on: 2009-04-13 17:32:33

    Solid Cherry Dresser
    Solid Cherry Dresser Listing #4112 Listed on: 2013-04-17 23:50:31

    "Teaching A Carving Class" An Ornamental Sunflower
    "Teaching A Carving Class" An Ornamental Sunflower Listing #2738 Listed on: 2010-05-13 13:24:19

    Modern Art-Inspired Bedroom Set
    Modern Art-Inspired Bedroom Set Listing #3733 Listed on: 2012-02-15 14:20:29

    Salon for the Rich and Famous
    Salon for the Rich and Famous Listing #1379 Listed on: 2008-07-25 16:49:38

    Arched Cedar Gates
    Arched Cedar Gates Listing #2977 Listed on: 2010-11-21 12:58:32

    Honduran Mahogany Cabinet
    Honduran Mahogany Cabinet Listing #3040 Listed on: 2011-01-10 19:40:18

    Residential Fixtures
    Residential Fixtures Listing #3844 Listed on: 2012-04-21 19:52:32

    Bamboo Cabinets
    Bamboo Cabinets Listing #4525 Listed on: 2015-02-14 09:41:33

    "Carved Frame" & "Marquetry Picture"
    "Carved Frame" & "Marquetry Picture" Listing #2559 Listed on: 2010-02-06 09:34:27

    The Second Large Column Carving of 2500 B.C. Persian King
    The Second Large Column Carving of 2500 B.C. Persian King Listing #4081 Listed on: 2013-03-14 19:24:35

    Another white oak storefront
    Another white oak storefront Listing #4903 Listed on: 2017-05-16 06:59:41

    Custom furniture
    Custom furniture Listing #4872 Listed on: 2017-04-06 23:06:55

    custom fireplace in Germany ... and other ...
    custom fireplace in Germany ... and other ... Listing #4864 Listed on: 2017-03-16 13:14:06

    Frames, Pictures and Light Fixtures
    Frames, Pictures and Light Fixtures Listing #2998 Listed on: 2010-12-04 13:41:46

    Alan Peters Inspired Oak Cabinet
    Alan Peters Inspired Oak Cabinet Listing #3209 Listed on: 2011-03-26 13:47:47

    Cherry/Birch School Library
    Cherry/Birch School Library Listing #3612 Listed on: 2011-11-23 00:59:52

    Miscellaneous Cabinets
    Miscellaneous Cabinets Listing #5389 Listed on: 2023-11-01 11:43:57

    An Even Trade
    An Even Trade Listing #4225 Listed on: 2013-09-14 08:46:51

    Curves in the Clouds
    Curves in the Clouds Listing #5186 Listed on: 2020-07-03 16:03:52

    Schaumburg Kitchen White Shaker Inset Cabinets
    Schaumburg Kitchen White Shaker Inset Cabinets Listing #5290 Listed on: 2022-07-28 23:42:21

    Custom Build
    Custom Build Listing #5117 Listed on: 2019-11-21 23:09:57

    Custom Painted Kitchen In The Works
    Custom Painted Kitchen In The Works Listing #2437 Listed on: 2009-12-12 09:47:07

    Two Chippendale Style Side Chairs
    Two Chippendale Style Side Chairs Listing #5285 Listed on: 2022-07-24 15:18:57

    Walnut Bar & Games Room
    Walnut Bar & Games Room Listing #4120 Listed on: 2013-04-30 09:40:03

    Hillsborough,CA
    Hillsborough,CA Listing #2364 Listed on: 2009-11-01 17:07:43

    Custom Furniture
    Custom Furniture Listing #2831 Listed on: 2010-07-28 11:03:30

    Moon and Stars Table
    Moon and Stars Table Listing #3714 Listed on: 2012-01-23 09:57:53

    Custom Made Furnishing-Woodwork-Finishing-Installation
    Custom Made Furnishing-Woodwork-Finishing-Installation Listing #2587 Listed on: 2010-02-18 23:55:06

    Sinker Caribbean Pine logs
    Sinker Caribbean Pine logs Listing #4905 Listed on: 2017-06-07 11:15:23

    Designing a Mission Style Fireplace Mantle
    Designing a Mission Style Fireplace Mantle Listing #4539 Listed on: 2015-03-10 09:28:21

    Decorative Screen Panels
    Decorative Screen Panels Listing #5062 Listed on: 2019-02-04 16:38:37

    Custom Made Kitchen, Closet and Vanity
    Custom Made Kitchen, Closet and Vanity Listing #4502 Listed on: 2014-12-16 21:20:20

    Antique Shelf From The "Stone Axe" Century
    Antique Shelf From The "Stone Axe" Century Listing #4135 Listed on: 2013-05-16 10:24:35

    Jewelery Boxes
    Jewelery Boxes Listing #3297 Listed on: 2011-05-15 10:04:41

    Green Man 2, Advanced Carving Class
    Green Man 2, Advanced Carving Class Listing #3877 Listed on: 2012-05-21 08:55:45

    Cedar entry gate with hand forged Iron work
    Cedar entry gate with hand forged Iron work Listing #4743 Listed on: 2016-04-12 09:51:07

    Cherry Kitchen with Mitered doors
    Cherry Kitchen with Mitered doors Listing #1949 Listed on: 2009-03-12 22:38:47

    John's Armoire
    John's Armoire Listing #4644 Listed on: 2015-08-21 19:57:19

    "Santa Claus" Cookies and Milk Cabinet
    "Santa Claus" Cookies and Milk Cabinet Listing #2460 Listed on: 2009-12-23 10:49:56

    Furniture
    Furniture Listing #2074 Listed on: 2009-05-04 15:33:28

    Commercial Work
    Commercial Work Listing #1830 Listed on: 2009-02-12 16:52:47

    Weed Pots
    Weed Pots Listing #5015 Listed on: 2018-05-23 08:53:17

    WINE ROOM
    WINE ROOM Listing #5270 Listed on: 2022-04-03 23:03:20

    Doorway pediment and pilaster
    Doorway pediment and pilaster Listing #4840 Listed on: 2016-12-31 22:36:51

    Doors restoration
    Doors restoration Listing #1771 Listed on: 2009-01-26 12:04:02

    Cherry Kitchen and Painted Pantry
    Cherry Kitchen and Painted Pantry Listing #4125 Listed on: 2013-05-04 06:31:13

    TV Stand/Entertainment Center
    TV Stand/Entertainment Center Listing #2533 Listed on: 2010-01-26 17:24:56

    Las Vegas Cabinet Job
    Las Vegas Cabinet Job Listing #5136 Listed on: 2020-01-02 15:23:34

    Egyptian Revival CD Cabinet
    Egyptian Revival CD Cabinet Listing #4631 Listed on: 2015-08-02 19:49:00

    Poker & Dining Table Combination
    Poker & Dining Table Combination Listing #2069 Listed on: 2009-05-03 22:56:09

    Custom Millwork Shop Drawings of Built-In Units
    Custom Millwork Shop Drawings of Built-In Units Listing #4025 Listed on: 2013-01-05 17:32:32

    Upscale Powder and Master Bath
    Upscale Powder and Master Bath Listing #4532 Listed on: 2015-02-24 23:13:01

    Arts and Crafts Queen Size Bed
    Arts and Crafts Queen Size Bed Listing #4406 Listed on: 2014-05-16 11:17:43

    Reclaimed Elm flooring
    Reclaimed Elm flooring Listing #3135 Listed on: 2011-01-31 03:10:41

    New Cross
    New Cross Listing #3855 Listed on: 2012-04-26 02:31:07

    $20 Polish Job!
    $20 Polish Job! Listing #3214 Listed on: 2011-03-28 04:58:08

    Misc Projects
    Misc Projects Listing #2084 Listed on: 2009-05-10 08:22:15

    Old Style Kitchen Shelf Replica
    Old Style Kitchen Shelf Replica Listing #3914 Listed on: 2012-06-17 16:55:09

    Cathy's Kitchen
    Cathy's Kitchen Listing #3165 Listed on: 2011-02-16 15:39:50

    Refacing Project Elston Ave Chicago
    Refacing Project Elston Ave Chicago Listing #4691 Listed on: 2015-12-12 01:10:58

    Carving Cross and Icon Shelf
    Carving Cross and Icon Shelf Listing #3928 Listed on: 2012-07-07 16:59:06

    base cabinets for concrete plant
    base cabinets for concrete plant Listing #1309 Listed on: 2008-06-10 21:00:38

    3BHK House Design
    3BHK House Design Listing #3835 Listed on: 2012-04-19 01:03:10

    Projects By Creative Spaces TT
    Projects By Creative Spaces TT Listing #2518 Listed on: 2010-01-15 23:54:44

    Walnut Cross With Carved-In Letters
    Walnut Cross With Carved-In Letters Listing #4268 Listed on: 2013-11-03 11:52:26

    Jewelry Box Replica
    Jewelry Box Replica Listing #3906 Listed on: 2012-06-13 00:03:51

    Hunter's House Shelf Replica
    Hunter's House Shelf Replica Listing #3917 Listed on: 2012-06-23 09:49:47

    Custom Sculpted Galley Rail Wall Shelf Units
    Custom Sculpted Galley Rail Wall Shelf Units Listing #4329 Listed on: 2014-01-16 15:48:09

    Antique Frame for Picture
    Antique Frame for Picture Listing #3967 Listed on: 2012-09-03 17:52:16

    Pool Decks
    Pool Decks Listing #3899 Listed on: 2012-06-07 11:30:48

    Modern entertainment center
    Modern entertainment center Listing #5039 Listed on: 2018-10-27 16:25:06

    Birch desk
    Birch desk Listing #2056 Listed on: 2009-04-26 04:38:09

    Oak Hall Tree
    Oak Hall Tree Listing #4188 Listed on: 2013-08-18 12:38:29

    Black Walnut Slab Coffee Table
    Black Walnut Slab Coffee Table Listing #5415 Listed on: 2024-02-23 17:06:10

    Child's Chair From The Fairy-Tale
    Child's Chair From The Fairy-Tale Listing #3780 Listed on: 2012-03-17 23:41:41

    Hollywood Hills
    Hollywood Hills Listing #3908 Listed on: 2012-06-13 13:23:49

    Rendering or tool path?
    Rendering or tool path? Listing #4987 Listed on: 2018-01-27 16:27:59

    BLUE KITCHEN
    BLUE KITCHEN Listing #5271 Listed on: 2022-04-03 23:07:29

    Dresser Concept
    Dresser Concept Listing #2815 Listed on: 2010-07-11 17:19:25

    Statue installation Project
    Statue installation Project Listing #5414 Listed on: 2024-02-21 15:45:54

    Built-Ins
    Built-Ins Listing #3720 Listed on: 2012-02-01 07:51:40

    Tack Trunks
    Tack Trunks Listing #4575 Listed on: 2015-04-16 17:56:06

    African Mahogany Island
    African Mahogany Island Listing #4273 Listed on: 2013-11-16 10:14:45

    Antique Frame For Icon
    Antique Frame For Icon Listing #3961 Listed on: 2012-08-30 12:35:25

    ebony/walnut living room set
    ebony/walnut living room set Listing #1724 Listed on: 2009-01-16 22:38:10

    Rustic Entertainment Center
    Rustic Entertainment Center Listing #3611 Listed on: 2011-11-22 11:55:56

    Wooden Childrens Puzzles
    Wooden Childrens Puzzles Listing #2830 Listed on: 2010-07-28 10:54:39

    Custom Bath Room
    Custom Bath Room Listing #4033 Listed on: 2013-01-13 00:08:11

    Extra-strength Cedar Chest
    Extra-strength Cedar Chest Listing #579 Listed on: 2007-02-18 11:57:32

    Custom Cabinetry
    Custom Cabinetry Listing #1515 Listed on: 2008-10-28 12:04:37

    From Birdhouses to Fine Furniture
    From Birdhouses to Fine Furniture Listing #4505 Listed on: 2014-12-21 08:04:58

    Anna's Jewelry Box
    Anna's Jewelry Box Listing #3102 Listed on: 2011-01-22 14:51:13

    Another Antique Frame For Icon
    Another Antique Frame For Icon Listing #3962 Listed on: 2012-08-30 12:38:21

    Small bamboo kitchen
    Small bamboo kitchen Listing #1977 Listed on: 2009-03-26 16:17:18

    Bespoke Oak TV Cabinet with Louvered Doors
    Bespoke Oak TV Cabinet with Louvered Doors Listing #3246 Listed on: 2011-04-14 13:35:47

    Black Walnut and Andiroba Coffee Table
    Black Walnut and Andiroba Coffee Table Listing #4437 Listed on: 2014-08-01 11:57:00

    Grand Central Station - restoration and fabrication
    Grand Central Station - restoration and fabrication Listing #1770 Listed on: 2009-01-26 11:01:22

    Beaded Inset Kitchen
    Beaded Inset Kitchen Listing #4293 Listed on: 2013-12-22 11:22:13

    Computer Desk
    Computer Desk Listing #2402 Listed on: 2009-11-24 11:15:16

    Cherry Chest of Drawers
    Cherry Chest of Drawers Listing #3243 Listed on: 2011-04-12 14:42:52

    Sofa tables utilizing customer driven design
    Sofa tables utilizing customer driven design Listing #1734 Listed on: 2009-01-19 19:31:40

    Mallets
    Mallets Listing #2007 Listed on: 2009-04-06 16:48:37

    Machines Cabinet Doors
    Machines Cabinet Doors Listing #5110 Listed on: 2019-11-01 17:47:29

    The Lost Treasure of One Tin Soldier
    The Lost Treasure of One Tin Soldier Listing #4555 Listed on: 2015-03-28 16:37:03

    Furniture Pieces
    Furniture Pieces Listing #3925 Listed on: 2012-07-03 09:19:56

    Iconostasis
    Iconostasis Listing #3848 Listed on: 2012-04-26 01:48:50

    Live Edge Claro Walnut Night Stands
    Live Edge Claro Walnut Night Stands Listing #4462 Listed on: 2014-10-06 02:33:44

    NJ Kitchen
    NJ Kitchen Listing #2386 Listed on: 2009-11-15 22:02:03

    Pictures of our cabinets
    Pictures of our cabinets Listing #1506 Listed on: 2008-10-22 17:31:14

    Walnut Dining Table with Glass River
    Walnut Dining Table with Glass River Listing #5416 Listed on: 2024-02-26 13:14:17

    Rhumbline Folding Chair
    Rhumbline Folding Chair Listing #2657 Listed on: 2010-03-19 08:00:18

    First Christian's Cross
    First Christian's Cross Listing #3963 Listed on: 2012-08-30 12:45:26

    "Sunlight on the Water Table" - Bubinga, Glass Beads
    "Sunlight on the Water Table" - Bubinga, Glass Beads Listing #3999 Listed on: 2012-11-10 11:29:16

    Mesquite Bar
    Mesquite Bar Listing #3879 Listed on: 2012-05-24 12:17:04

    Wooden Stars
    Wooden Stars Listing #4208 Listed on: 2013-09-10 10:02:55

    first circular flooring made from 100% waste wood
    first circular flooring made from 100% waste wood Listing #4951 Listed on: 2017-11-17 18:02:34

    Anegre, Walnut and Paint Grade Panels and Security Desk
    Anegre, Walnut and Paint Grade Panels and Security Desk Listing #4342 Listed on: 2014-02-07 15:00:07

    George II Period Tall Case Clock
    George II Period Tall Case Clock Listing #1816 Listed on: 2009-02-09 15:01:32

    LOUIS XVI COMMODE
    LOUIS XVI COMMODE Listing #1369 Listed on: 2008-07-17 11:27:33

    MOTHER
    MOTHER Listing #1856 Listed on: 2009-02-17 08:35:56

    Deck Remodel
    Deck Remodel Listing #1483 Listed on: 2008-10-11 12:05:31

    Halpern Eye Center
    Halpern Eye Center Listing #3060 Listed on: 2011-01-13 17:58:37

    Black Walnut River Table
    Black Walnut River Table Listing #5068 Listed on: 2019-03-15 13:38:31

    Six Ways To Sunday
    Six Ways To Sunday Listing #4556 Listed on: 2015-03-28 16:48:12

    Custom Entertainment Shelf
    Custom Entertainment Shelf Listing #4319 Listed on: 2014-01-07 20:55:05

    Laundry Room
    Laundry Room Listing #3259 Listed on: 2011-04-16 10:42:20

    The Lost Day Chest
    The Lost Day Chest Listing #4558 Listed on: 2015-03-28 18:00:45

    Carved Mahogany Doors
    Carved Mahogany Doors Listing #4278 Listed on: 2013-11-25 05:26:26

    Cherry Bunkbed With Drawers and Trundle
    Cherry Bunkbed With Drawers and Trundle Listing #2921 Listed on: 2010-09-30 07:58:54

    Old "old style" Shelf
    Old "old style" Shelf Listing #3985 Listed on: 2012-10-08 18:41:35

    Mammoth Cedar Log Yard Swing
    Mammoth Cedar Log Yard Swing Listing #4328 Listed on: 2014-01-14 22:32:27

    Antique White Maple Dresser
    Antique White Maple Dresser Listing #2464 Listed on: 2009-12-24 11:13:05

    Kidney Bean coffee table
    Kidney Bean coffee table Listing #5028 Listed on: 2018-08-24 22:03:29

    Free Standing Vanities
    Free Standing Vanities Listing #4765 Listed on: 2016-06-10 11:24:54

    Bubinga and Wenge Console Table
    Bubinga and Wenge Console Table Listing #3732 Listed on: 2012-02-15 13:56:20

    Covered Wagon
    Covered Wagon Listing #4190 Listed on: 2013-08-18 13:03:11

    Custom Display Cases
    Custom Display Cases Listing #5126 Listed on: 2019-12-05 17:42:52

    Painted MDF Wall Units
    Painted MDF Wall Units Listing #3010 Listed on: 2010-12-14 04:19:35

    "Gothic Cat Carving"
    "Gothic Cat Carving" Listing #1511 Listed on: 2008-10-25 11:14:45

    Cradles
    Cradles Listing #2983 Listed on: 2010-11-25 20:20:00

    Cabinet Refacing (before and after)
    Cabinet Refacing (before and after) Listing #1204 Listed on: 2008-03-18 21:49:05

    Orion Speaker Cabinets
    Orion Speaker Cabinets Listing #4067 Listed on: 2013-02-22 18:16:32

    Master Bathroom
    Master Bathroom Listing #1938 Listed on: 2009-03-09 22:55:04

    Bathroom
    Bathroom Listing #3256 Listed on: 2011-04-16 10:26:25

    Oak Roll Top Computer Desk
    Oak Roll Top Computer Desk Listing #4122 Listed on: 2013-04-30 10:13:35

    Cherry Corner Cupboard
    Cherry Corner Cupboard Listing #2713 Listed on: 2010-04-19 20:46:28

    Angled Riser Oak Stair
    Angled Riser Oak Stair Listing #3438 Listed on: 2011-09-22 16:01:13

    Jewelry Boxes Vol 1
    Jewelry Boxes Vol 1 Listing #2453 Listed on: 2009-12-19 22:04:15

    Hinged Mirror
    Hinged Mirror Listing #1342 Listed on: 2008-07-02 15:51:45

    Baby Cradle
    Baby Cradle Listing #2780 Listed on: 2010-06-13 17:29:55

    Oak Dining Table with Walnut Inlay
    Oak Dining Table with Walnut Inlay Listing #3964 Listed on: 2012-08-31 21:18:19

    Dovetailed Reclaimed Timber Coffee Table
    Dovetailed Reclaimed Timber Coffee Table Listing #2529 Listed on: 2010-01-23 01:52:24

    Painted Beaded Inset Kitchen
    Painted Beaded Inset Kitchen Listing #4295 Listed on: 2013-12-22 11:32:11

    Walnut and Curly Maple Desk
    Walnut and Curly Maple Desk Listing #3735 Listed on: 2012-02-15 15:05:51

    16'x 40" Florida Cedar Table
    16'x 40" Florida Cedar Table Listing #4454 Listed on: 2014-09-23 14:07:18

    "Old Style" Shelf
    "Old Style" Shelf Listing #3982 Listed on: 2012-10-02 22:28:36

    Stairway to Heaven
    Stairway to Heaven Listing #4615 Listed on: 2015-06-24 01:30:01

    Stained Beaded Inset Kitchen
    Stained Beaded Inset Kitchen Listing #4301 Listed on: 2013-12-22 11:58:32

    Pained Beaded Inset Kitchen
    Pained Beaded Inset Kitchen Listing #4297 Listed on: 2013-12-22 11:39:48

    Live edge white oak dining
    Live edge white oak dining Listing #5464 Listed on: 2025-07-05 18:37:38

    Custom Video Projector Wall Shelf
    Custom Video Projector Wall Shelf Listing #4321 Listed on: 2014-01-08 13:55:57

    Custom Mirror
    Custom Mirror Listing #2336 Listed on: 2009-10-12 18:26:17

    Walnut Book Cases
    Walnut Book Cases Listing #4306 Listed on: 2013-12-22 12:13:06

    CIA STAFF
    CIA STAFF Listing #2115 Listed on: 2009-05-31 15:29:20

    Art Tables for Manhattan Youth August 200-8
    Art Tables for Manhattan Youth August 200-8 Listing #1504 Listed on: 2008-10-22 11:39:24

    Bach display
    Bach display Listing #4676 Listed on: 2015-10-24 03:59:22

    Carving Frame-Like Antique for Hand-Painted Drawing Picture
    Carving Frame-Like Antique for Hand-Painted Drawing Picture Listing #3981 Listed on: 2012-10-02 22:20:59

    Jewelry Box
    Jewelry Box Listing #3685 Listed on: 2012-01-09 21:21:15

    Built-in Entertainment Center
    Built-in Entertainment Center Listing #1927 Listed on: 2009-03-07 11:44:30

    Cherry Kitchen Dark Satin
    Cherry Kitchen Dark Satin Listing #3744 Listed on: 2012-02-23 16:23:29

    Dovetail Chair
    Dovetail Chair Listing #2433 Listed on: 2009-12-06 22:44:12

    Euro Style Entertainment Center
    Euro Style Entertainment Center Listing #2592 Listed on: 2010-02-22 11:38:53

    Deco "Tree" panel
    Deco "Tree" panel Listing #4992 Listed on: 2018-02-03 08:56:18

    Custom Galley Rail Shelf
    Custom Galley Rail Shelf Listing #4359 Listed on: 2014-02-25 10:37:45

    Cabinets - Mix
    Cabinets - Mix Listing #5388 Listed on: 2023-10-30 11:29:58

    arched keystone door frame
    arched keystone door frame Listing #1990 Listed on: 2009-03-29 20:11:30

    Total Kitchen Remodel
    Total Kitchen Remodel Listing #5456 Listed on: 2025-04-09 13:31:43

    MY ALPHACAM PROYECTS
    MY ALPHACAM PROYECTS Listing #4917 Listed on: 2017-07-13 08:41:46

    Curly Cherry Mantle and Cabinets
    Curly Cherry Mantle and Cabinets Listing #3737 Listed on: 2012-02-19 13:14:15

    Lectern
    Lectern Listing #3850 Listed on: 2012-04-26 02:16:21

    Kitchen
    Kitchen Listing #3909 Listed on: 2012-06-13 13:49:09

    Neoclassical Carving, replica Console Table
    Neoclassical Carving, replica Console Table Listing #5326 Listed on: 2023-04-07 23:54:50

    Art Deco Side Table
    Art Deco Side Table Listing #3424 Listed on: 2011-09-04 23:17:09

    Fireplace/Entertainment
    Fireplace/Entertainment Listing #2724 Listed on: 2010-05-04 22:07:23

    Red Oak Full Surround Mantle
    Red Oak Full Surround Mantle Listing #2351 Listed on: 2009-10-27 14:39:20

    Birch Kitchen
    Birch Kitchen Listing #1998 Listed on: 2009-04-01 09:17:58

    World Map for Missions Ministry
    World Map for Missions Ministry Listing #5091 Listed on: 2019-06-27 10:56:26

    Entry Door Two
    Entry Door Two Listing #4386 Listed on: 2014-04-11 17:32:17

    Locally Harvested Pine Slab Dining Table
    Locally Harvested Pine Slab Dining Table Listing #3173 Listed on: 2011-02-24 19:52:22

    Sushi Restaurant-Inspired Kitchen in Natural Maple
    Sushi Restaurant-Inspired Kitchen in Natural Maple Listing #3711 Listed on: 2012-01-22 01:23:31

    Mahogany Office
    Mahogany Office Listing #4290 Listed on: 2013-12-21 14:35:15

    Matching grain walnut kitchen
    Matching grain walnut kitchen Listing #1826 Listed on: 2009-02-11 19:35:20

    Krispy Kreme Cruiser
    Krispy Kreme Cruiser Listing #3918 Listed on: 2012-06-24 10:04:27

    Mid-Century Modern Chair
    Mid-Century Modern Chair Listing #4175 Listed on: 2013-07-25 12:48:46

    Maple Cabinets
    Maple Cabinets Listing #3796 Listed on: 2012-03-30 09:44:58

    Cigar Puzzle Box #9
    Cigar Puzzle Box #9 Listing #3916 Listed on: 2012-06-21 01:56:10

    2nd Mantle
    2nd Mantle Listing #3250 Listed on: 2011-04-16 09:07:40

    "Don't Let It Out"
    "Don't Let It Out" Listing #3940 Listed on: 2012-08-02 12:15:26

    Built-in Wall Unit Home Office
    Built-in Wall Unit Home Office Listing #3179 Listed on: 2011-03-01 22:32:07

    Cherry Fireplace mantle and Entertainment
    Cherry Fireplace mantle and Entertainment Listing #2490 Listed on: 2010-01-01 17:40:53

    MUD ROOM
    MUD ROOM Listing #5269 Listed on: 2022-04-03 22:38:07

    Wine Racks
    Wine Racks Listing #1835 Listed on: 2009-02-14 09:14:26

    Handmade mahogany fishing reel
    Handmade mahogany fishing reel Listing #5409 Listed on: 2024-01-27 09:37:52

    Big G Cherry Entertainment Console
    Big G Cherry Entertainment Console Listing #5188 Listed on: 2020-07-21 12:43:11

    Wenge Coffee Table
    Wenge Coffee Table Listing #1254 Listed on: 2008-04-18 16:14:29

    Hot Seat Flatpack Chair
    Hot Seat Flatpack Chair Listing #2782 Listed on: 2010-06-14 06:55:30

    Whale Project
    Whale Project Listing #2259 Listed on: 2009-08-16 08:38:53

    Hammer Beam
    Hammer Beam Listing #3215 Listed on: 2011-03-29 21:12:39

    Cherry Rocker
    Cherry Rocker Listing #1911 Listed on: 2009-03-02 18:14:37

    lobster trap light fixture
    lobster trap light fixture Listing #4730 Listed on: 2016-02-26 12:26:00

    Bunk Bed With Stairs/Drawers
    Bunk Bed With Stairs/Drawers Listing #4662 Listed on: 2015-09-28 12:56:30

    Quick Gift
    Quick Gift Listing #1252 Listed on: 2008-04-18 09:04:29

    Kitchen Cabinets
    Kitchen Cabinets Listing #5149 Listed on: 2020-02-06 22:12:05

    White Oak Bookcases
    White Oak Bookcases Listing #2426 Listed on: 2009-12-03 18:53:54

    reception desk
    reception desk Listing #4624 Listed on: 2015-07-30 13:11:23

    Custom Kitchen
    Custom Kitchen Listing #5155 Listed on: 2020-02-09 01:11:56

    Cabinet Photos
    Cabinet Photos Listing #3787 Listed on: 2012-03-24 10:30:10

    Kitchen Cabinets
    Kitchen Cabinets Listing #5151 Listed on: 2020-02-06 22:17:04

    Front Entry
    Front Entry Listing #3348 Listed on: 2011-06-12 17:01:10

    Custom Kitchen
    Custom Kitchen Listing #5154 Listed on: 2020-02-09 00:36:55

    Jewel box cabin...
    Jewel box cabin... Listing #4793 Listed on: 2016-07-06 12:29:30

    Commercial Cabinets / Millwork
    Commercial Cabinets / Millwork Listing #1870 Listed on: 2009-02-18 19:47:21

    turn of the century church renovation
    turn of the century church renovation Listing #2531 Listed on: 2010-01-23 19:00:24

    Arts and Crafts Bedside Tables
    Arts and Crafts Bedside Tables Listing #4405 Listed on: 2014-05-16 11:05:06

    Two Seat Bench With Storage
    Two Seat Bench With Storage Listing #3357 Listed on: 2011-06-21 21:11:34

    9 Level Maintenance Badge
    9 Level Maintenance Badge Listing #2398 Listed on: 2009-11-24 10:32:48

    Football Helmet
    Football Helmet Listing #4906 Listed on: 2017-06-08 20:42:35

    Live Edge Ash slabs
    Live Edge Ash slabs Listing #5225 Listed on: 2021-02-26 08:27:06

    Marble Table
    Marble Table Listing #3182 Listed on: 2011-03-03 21:29:43

    Gazebo
    Gazebo Listing #3217 Listed on: 2011-03-29 21:52:28

    Formal Dining Room
    Formal Dining Room Listing #3218 Listed on: 2011-03-30 08:26:11

    Hickory With Double Stack Crown
    Hickory With Double Stack Crown Listing #2742 Listed on: 2010-05-19 07:34:10

    16/4 cherry table base ( Finally!!)
    16/4 cherry table base ( Finally!!) Listing #1869 Listed on: 2009-02-18 18:57:08

    Uropien Oak Dining Table
    Uropien Oak Dining Table Listing #4630 Listed on: 2015-08-01 15:34:09

    Bookcase
    Bookcase Listing #2891 Listed on: 2010-09-12 00:48:19

    Electric Keyboard Piano Body
    Electric Keyboard Piano Body Listing #3674 Listed on: 2012-01-04 14:23:34

    Beaded Inset Kitchen With Stained Island
    Beaded Inset Kitchen With Stained Island Listing #4296 Listed on: 2013-12-22 11:35:16

    Lands End Rd
    Lands End Rd Listing #4982 Listed on: 2018-01-20 11:41:43

    Ornamental exterior deck cedar add-ons
    Ornamental exterior deck cedar add-ons Listing #1707 Listed on: 2009-01-14 08:03:13

    Hydropolis Museum exhibition stand
    Hydropolis Museum exhibition stand Listing #5122 Listed on: 2019-11-28 09:49:38

    Eastover
    Eastover Listing #2073 Listed on: 2009-05-04 15:25:09

    French Farmhouse Style Oak Dresser
    French Farmhouse Style Oak Dresser Listing #3265 Listed on: 2011-04-19 08:57:01

    Electric Fire Place Mantle
    Electric Fire Place Mantle Listing #4292 Listed on: 2013-12-22 11:12:09

    Retirement Clock
    Retirement Clock Listing #2403 Listed on: 2009-11-24 11:26:45

    Handcrafted Log Cabin
    Handcrafted Log Cabin Listing #3204 Listed on: 2011-03-22 23:35:16

    Yurt
    Yurt Listing #4056 Listed on: 2013-02-15 14:36:43

    Wooden shelf
    Wooden shelf Listing #3134 Listed on: 2011-01-30 13:05:00

    Memorial Cherry Bench
    Memorial Cherry Bench Listing #3896 Listed on: 2012-06-04 18:31:02

    Mudroom Entry Raised Floor and Shoe Storage
    Mudroom Entry Raised Floor and Shoe Storage Listing #4436 Listed on: 2014-07-28 15:50:28

    Seck's Custom Home Office Desk
    Seck's Custom Home Office Desk Listing #5131 Listed on: 2019-12-20 16:49:17

    Custom Kitchen Lincoln Park
    Custom Kitchen Lincoln Park Listing #5029 Listed on: 2018-09-01 20:33:09

    Black Wooden Wardrobe
    Black Wooden Wardrobe Listing #5373 Listed on: 2023-09-07 09:24:13

    Another Rocker Refurb
    Another Rocker Refurb Listing #2465 Listed on: 2009-12-24 11:54:41

    Deck rails
    Deck rails Listing #3627 Listed on: 2011-11-30 23:37:45

    Chase Center
    Chase Center Listing #5202 Listed on: 2020-12-07 07:39:14

    Command Pilots Wings Shadowbox
    Command Pilots Wings Shadowbox Listing #3755 Listed on: 2012-03-03 23:21:28

    Beaded Inset Built-Ins
    Beaded Inset Built-Ins Listing #4305 Listed on: 2013-12-22 12:10:04

    Microphone Shockmount Shelf with Base
    Microphone Shockmount Shelf with Base Listing #4429 Listed on: 2014-07-14 15:57:55

    Mahogany Floating Vanity
    Mahogany Floating Vanity Listing #3738 Listed on: 2012-02-19 13:30:22

    "Enraptured II"
    "Enraptured II" Listing #1849 Listed on: 2009-02-16 12:55:58

    Bunk Beds
    Bunk Beds Listing #5108 Listed on: 2019-10-31 18:36:43

    Rustic Birch Wine Cabinet
    Rustic Birch Wine Cabinet Listing #1457 Listed on: 2008-09-21 18:07:37

    country kitchen
    country kitchen Listing #1809 Listed on: 2009-02-09 10:59:49

    Rustic chairs made of Taiwan Cedar
    Rustic chairs made of Taiwan Cedar Listing #4914 Listed on: 2017-07-04 13:16:36

    Spalted Oak Countertops
    Spalted Oak Countertops Listing #2120 Listed on: 2009-06-04 23:17:19

    Microscope Tables
    Microscope Tables Listing #2325 Listed on: 2009-10-02 19:56:42

    Walnut and Red Oak Accent Table
    Walnut and Red Oak Accent Table Listing #4172 Listed on: 2013-07-20 18:01:54

    Temple Doors
    Temple Doors Listing #2975 Listed on: 2010-11-17 08:59:37

    Assorted Tables
    Assorted Tables Listing #3679 Listed on: 2012-01-04 20:01:53

    Bubinga Entertainment Center
    Bubinga Entertainment Center Listing #1700 Listed on: 2009-01-11 22:33:36

    Chess Boards
    Chess Boards Listing #1797 Listed on: 2009-02-03 17:01:24

    butcher block kitchen island
    butcher block kitchen island Listing #5422 Listed on: 2024-06-16 08:08:05

    Orthodox Pattern and Detail of Iconostasis
    Orthodox Pattern and Detail of Iconostasis Listing #3858 Listed on: 2012-04-26 02:46:46

    Cigar Puzzle Box #8
    Cigar Puzzle Box #8 Listing #3705 Listed on: 2012-01-18 17:40:17

    Custom Chair
    Custom Chair Listing #5145 Listed on: 2020-01-13 18:51:21

    Plywood Cabinet
    Plywood Cabinet Listing #5261 Listed on: 2022-03-04 23:53:17

    Structure Entry Table
    Structure Entry Table Listing #2583 Listed on: 2010-02-18 12:46:51

    built in
    built in Listing #1838 Listed on: 2009-02-14 19:39:52

    Primitive Entertainment Center
    Primitive Entertainment Center Listing #3749 Listed on: 2012-02-28 22:34:01

    Basement Entertainment Kitchen
    Basement Entertainment Kitchen Listing #3254 Listed on: 2011-04-16 10:05:04

    Cigar Box Puzzle #3
    Cigar Box Puzzle #3 Listing #3704 Listed on: 2012-01-18 17:03:51

    Wood and Stone Veneer
    Wood and Stone Veneer Listing #3750 Listed on: 2012-02-29 11:03:18

    Jewelry Dish
    Jewelry Dish Listing #4070 Listed on: 2013-02-23 13:50:20

    Cherry book case
    Cherry book case Listing #2246 Listed on: 2009-08-06 12:37:00

    Federal chairs in walnut
    Federal chairs in walnut Listing #5244 Listed on: 2021-11-21 13:03:08

    Curly Cherry Bedroom Set
    Curly Cherry Bedroom Set Listing #3920 Listed on: 2012-06-24 10:50:31

    Kitchen
    Kitchen Listing #2196 Listed on: 2009-07-14 10:36:57

    Bookcase/Cupboard
    Bookcase/Cupboard Listing #4013 Listed on: 2012-12-06 22:32:59

    My Favorite projects
    My Favorite projects Listing #2561 Listed on: 2010-02-08 17:13:16

    Bar
    Bar Listing #1384 Listed on: 2008-07-26 23:40:04

    Limbert tables
    Limbert tables Listing #1747 Listed on: 2009-01-21 19:08:05

    Ipe Driveway Gate
    Ipe Driveway Gate Listing #4375 Listed on: 2014-03-29 16:32:12

    Red Oak Drawers
    Red Oak Drawers Listing #4191 Listed on: 2013-08-18 16:42:50

    "The Valentine Table"
    "The Valentine Table" Listing #3067 Listed on: 2011-01-14 16:00:19

    Reception Desk
    Reception Desk Listing #1661 Listed on: 2008-12-28 21:31:08

    Enraptured I
    Enraptured I Listing #1848 Listed on: 2009-02-16 12:48:35

    Master Bathroom Cabinetry
    Master Bathroom Cabinetry Listing #1872 Listed on: 2009-02-18 23:10:32

    End Table - Green Poplar
    End Table - Green Poplar Listing #4991 Listed on: 2018-02-03 08:44:22

    Custom Built-Ins and Wainscoting
    Custom Built-Ins and Wainscoting Listing #1516 Listed on: 2008-10-28 12:22:49

    "Angel in Prayer"
    "Angel in Prayer" Listing #1847 Listed on: 2009-02-16 12:38:22

    White Pine Bar Top
    White Pine Bar Top Listing #3048 Listed on: 2011-01-13 11:23:21

    Reclaimed Wood desk
    Reclaimed Wood desk Listing #5006 Listed on: 2018-04-06 15:48:36

    Radius Arbor
    Radius Arbor Listing #3960 Listed on: 2012-08-30 10:58:29

    Mechanical Cellarette
    Mechanical Cellarette Listing #4559 Listed on: 2015-03-30 10:23:52

    Veneer wood Tiger from Soviet Union
    Veneer wood Tiger from Soviet Union Listing #4419 Listed on: 2014-06-23 15:27:47

    Custom Bookcases With Rolling Ladder
    Custom Bookcases With Rolling Ladder Listing #4048 Listed on: 2013-02-02 21:27:51

    Dining room buffet
    Dining room buffet Listing #1244 Listed on: 2008-04-15 17:07:18

    Entertainment Center
    Entertainment Center Listing #4698 Listed on: 2015-12-19 18:48:15

    Fiberglass Gelcoat Panel
    Fiberglass Gelcoat Panel Listing #4015 Listed on: 2012-12-11 15:42:34

    Simple office bookcase
    Simple office bookcase Listing #3018 Listed on: 2010-12-21 20:21:24

    Doors preservation, restoration,
    Doors preservation, restoration, Listing #1817 Listed on: 2009-02-09 15:11:15

    CHEST OF DRAWERS
    CHEST OF DRAWERS Listing #5000 Listed on: 2018-03-30 16:13:24

    Wood Coasters
    Wood Coasters Listing #2449 Listed on: 2009-12-19 19:40:59

    Plantation Shutters
    Plantation Shutters Listing #3728 Listed on: 2012-02-09 08:38:08

    SIMPLE TABLE
    SIMPLE TABLE Listing #1853 Listed on: 2009-02-16 19:20:46

    Home Office
    Home Office Listing #4277 Listed on: 2013-11-24 10:42:40

    Cabinet Refacing-White Painted
    Cabinet Refacing-White Painted Listing #1474 Listed on: 2008-10-07 21:26:23

    Flow night stands
    Flow night stands Listing #5189 Listed on: 2020-07-21 12:56:06

    Suspended Panel Console Table
    Suspended Panel Console Table Listing #1243 Listed on: 2008-04-15 16:58:14

    custom bathroom vanity
    custom bathroom vanity Listing #1629 Listed on: 2008-12-14 19:52:41

    Evanston Kitchen
    Evanston Kitchen Listing #4370 Listed on: 2014-03-21 00:17:12

    Havens Metal Copper Sink - Wood Cabin
    Havens Metal Copper Sink - Wood Cabin Listing #4938 Listed on: 2017-10-05 14:27:51

    Bloom Table
    Bloom Table Listing #3398 Listed on: 2011-07-28 18:25:51

    Custom Walnut Home Office
    Custom Walnut Home Office Listing #4910 Listed on: 2017-06-20 20:44:11

    sweater cab
    sweater cab Listing #1902 Listed on: 2009-03-01 10:23:48

    Japanese Shoji
    Japanese Shoji Listing #3235 Listed on: 2011-04-09 17:32:38

    first circular flooring made from 100 % waste wood
    first circular flooring made from 100 % waste wood Listing #4952 Listed on: 2017-11-17 18:05:06

    Can't
    Can't Listing #4660 Listed on: 2015-09-24 20:58:07

    Hope Chest
    Hope Chest Listing #4158 Listed on: 2013-06-09 08:52:47

    Crusifixes
    Crusifixes Listing #3856 Listed on: 2012-04-26 02:35:52

    Custom Cabinets
    Custom Cabinets Listing #2075 Listed on: 2009-05-05 21:50:10

    Desk restoration, preservation
    Desk restoration, preservation Listing #1814 Listed on: 2009-02-09 14:31:07

    Door repair and restoration, refinishing
    Door repair and restoration, refinishing Listing #1812 Listed on: 2009-02-09 14:08:30

    Lord's Supper
    Lord's Supper Listing #3857 Listed on: 2012-04-26 02:40:50

    antique reproduction childrens chest
    antique reproduction childrens chest Listing #2530 Listed on: 2010-01-23 18:54:07

    Painted Vanity
    Painted Vanity Listing #2758 Listed on: 2010-05-28 20:51:13

    Cabinet Refacing Project Oak Park Illinois
    Cabinet Refacing Project Oak Park Illinois Listing #4960 Listed on: 2017-12-01 19:56:56

    Highboy
    Highboy Listing #2512 Listed on: 2010-01-12 22:46:17

    Live Edge Furniture
    Live Edge Furniture Listing #4870 Listed on: 2017-04-04 12:21:08

    Clubhouse T&G Ceiling
    Clubhouse T&G Ceiling Listing #5127 Listed on: 2019-12-17 19:28:45

    Barn Style Kitchen
    Barn Style Kitchen Listing #5163 Listed on: 2020-03-02 19:11:11

    Maple Hall Table - Live Edge
    Maple Hall Table - Live Edge Listing #2343 Listed on: 2009-10-21 08:23:36

    Rocking Lion
    Rocking Lion Listing #5047 Listed on: 2018-11-26 17:54:19

    Cross For The Top of Iconostasis
    Cross For The Top of Iconostasis Listing #3849 Listed on: 2012-04-26 02:11:04

    A Bit of Fresh Mid Century Modern
    A Bit of Fresh Mid Century Modern Listing #4763 Listed on: 2016-05-27 22:09:09

    Army Air Corp Technical Sargeant Stipe
    Army Air Corp Technical Sargeant Stipe Listing #2399 Listed on: 2009-11-24 10:45:26

    Millwork for a retail store
    Millwork for a retail store Listing #901 Listed on: 2007-10-25 09:49:23

    Custom wine drawer
    Custom wine drawer Listing #1778 Listed on: 2009-01-27 14:13:33

    bedroom
    bedroom Listing #1443 Listed on: 2008-09-06 03:20:33

    7" x 7" Curved Crown Moulding
    7" x 7" Curved Crown Moulding Listing #2019 Listed on: 2009-04-11 19:08:28

    Russian Canonical Iconostasis
    Russian Canonical Iconostasis Listing #3851 Listed on: 2012-04-26 02:22:32

    Built-In Entertainment Center
    Built-In Entertainment Center Listing #2743 Listed on: 2010-05-19 07:42:57

    Custom Carved Bed
    Custom Carved Bed Listing #2383 Listed on: 2009-11-13 11:56:27

    wood I am milling for my floors and cabinets
    wood I am milling for my floors and cabinets Listing #1266 Listed on: 2008-04-24 23:04:33

    Hard Maple Workbench
    Hard Maple Workbench Listing #1976 Listed on: 2009-03-26 10:30:00

    Greek credenza
    Greek credenza Listing #1820 Listed on: 2009-02-09 16:37:08

    Curly birch interior doors
    Curly birch interior doors Listing #1486 Listed on: 2008-10-13 08:27:42

    Desk restoration, refinishing
    Desk restoration, refinishing Listing #1811 Listed on: 2009-02-09 13:58:00

    Elm Fireplace Surround
    Elm Fireplace Surround Listing #5417 Listed on: 2024-02-26 13:53:58

    Antique Built-In
    Antique Built-In Listing #2882 Listed on: 2010-09-02 01:40:00

    Maple Cabinets Shaker Style
    Maple Cabinets Shaker Style Listing #5289 Listed on: 2022-07-28 23:23:45

    Roco Wine Rack Top
    Roco Wine Rack Top Listing #1733 Listed on: 2009-01-19 19:25:51

    Antique syrup kettle fire pit
    Antique syrup kettle fire pit Listing #4999 Listed on: 2018-03-29 20:17:22

    Site built round top reclaimed oak entry...
    Site built round top reclaimed oak entry... Listing #4791 Listed on: 2016-07-06 11:25:19

    Cherry China cabinet
    Cherry China cabinet Listing #1611 Listed on: 2008-12-02 18:00:04

    Arched top door, 6' x 8' x 10/4"
    Arched top door, 6' x 8' x 10/4" Listing #2656 Listed on: 2010-03-19 00:51:34

    Cedar corner display cabinet
    Cedar corner display cabinet Listing #1999 Listed on: 2009-04-01 09:28:22

    Veneer carving
    Veneer carving Listing #1308 Listed on: 2008-06-08 11:15:55

    Basic Retirement Case W/Flag
    Basic Retirement Case W/Flag Listing #2404 Listed on: 2009-11-24 11:33:27

    maple basement kitchen
    maple basement kitchen Listing #2373 Listed on: 2009-11-03 22:28:00

    Sliding interior door
    Sliding interior door Listing #1839 Listed on: 2009-02-14 19:45:36

    kings chair
    kings chair Listing #1836 Listed on: 2009-02-14 18:13:22

    Reclaimed Riverwood Chest
    Reclaimed Riverwood Chest Listing #2308 Listed on: 2009-09-21 16:22:32

    Breaking All The Rules
    Breaking All The Rules Listing #4343 Listed on: 2014-02-08 05:24:49

    mesquite hutch
    mesquite hutch Listing #1837 Listed on: 2009-02-14 18:19:02

    Modern end table
    Modern end table Listing #1749 Listed on: 2009-01-21 19:17:06

    Fun Project
    Fun Project Listing #5229 Listed on: 2021-05-12 10:54:40

    queen-anne walnut coffee table
    queen-anne walnut coffee table Listing #4976 Listed on: 2017-12-31 12:04:57

    Walnut Office Furniture
    Walnut Office Furniture Listing #2606 Listed on: 2010-02-27 19:03:16

    Walnut Kitchen
    Walnut Kitchen Listing #3145 Listed on: 2011-02-01 18:20:50

    Veneer Herringbone Valances
    Veneer Herringbone Valances Listing #4320 Listed on: 2014-01-08 13:06:43

    Beadboard Bar
    Beadboard Bar Listing #4453 Listed on: 2014-09-23 13:02:32

    Bar stand
    Bar stand Listing #1484 Listed on: 2008-10-11 18:45:53

    Birch entertainment center
    Birch entertainment center Listing #1271 Listed on: 2008-05-03 11:04:45

    Faux Finished Hutch Cabinet
    Faux Finished Hutch Cabinet Listing #4356 Listed on: 2014-02-20 20:55:16

    Chippewa Bench
    Chippewa Bench Listing #1544 Listed on: 2008-11-08 00:31:40

    Figured Cherry Coffee Table
    Figured Cherry Coffee Table Listing #1709 Listed on: 2009-01-14 09:07:41

    CNC Milled Wood Glasses Stand
    CNC Milled Wood Glasses Stand Listing #3891 Listed on: 2012-06-01 12:57:19

    Cherry Media Center
    Cherry Media Center Listing #5027 Listed on: 2018-08-12 23:24:51

    Walnut Geometric Bookcase
    Walnut Geometric Bookcase Listing #4121 Listed on: 2013-04-30 10:00:11

    erc hope chest
    erc hope chest Listing #2510 Listed on: 2010-01-11 21:00:21

    Structure Dining Table
    Structure Dining Table Listing #2585 Listed on: 2010-02-18 13:09:05

    Side Table w/magazine rack
    Side Table w/magazine rack Listing #2803 Listed on: 2010-06-28 15:37:18

    Shiplap Cedar Bar
    Shiplap Cedar Bar Listing #4513 Listed on: 2015-01-15 10:35:05

    Jewlery Box
    Jewlery Box Listing #3676 Listed on: 2012-01-04 14:48:32

    A sampling of our work
    A sampling of our work Listing #1860 Listed on: 2009-02-17 10:09:16

    Walnut Bed
    Walnut Bed Listing #3801 Listed on: 2012-03-30 17:01:31

    Simple Closet Made With MDF
    Simple Closet Made With MDF Listing #2932 Listed on: 2010-10-08 22:39:27

    Custom Church Furniture Piece
    Custom Church Furniture Piece Listing #5141 Listed on: 2020-01-09 20:27:33

    Walk-in Closet
    Walk-in Closet Listing #4307 Listed on: 2013-12-22 12:17:55

    Quarter Sawn Cherry Kitchen
    Quarter Sawn Cherry Kitchen Listing #2405 Listed on: 2009-11-24 20:01:20

    sculpture stand
    sculpture stand Listing #1562 Listed on: 2008-11-12 16:22:43

    Tavern Table
    Tavern Table Listing #4848 Listed on: 2017-01-28 10:04:58

    Miniture Hutch For My Daughter
    Miniture Hutch For My Daughter Listing #1708 Listed on: 2009-01-14 08:58:06

    eucalyptus desk
    eucalyptus desk Listing #5018 Listed on: 2018-07-21 07:19:50

    Golf Ball Display Case
    Golf Ball Display Case Listing #3834 Listed on: 2012-04-18 23:33:57

    Pine Swings & Gliders
    Pine Swings & Gliders Listing #3799 Listed on: 2012-03-30 09:56:31

    Milk Paint Cabinets
    Milk Paint Cabinets Listing #3695 Listed on: 2012-01-13 21:27:09

    Sea Side Deck
    Sea Side Deck Listing #3449 Listed on: 2011-09-26 19:11:04

    Chess Board
    Chess Board Listing #4700 Listed on: 2015-12-19 18:55:19

    Grandfather Clocks
    Grandfather Clocks Listing #5479 Listed on: 2025-10-22 21:47:36

    Mirror Frame
    Mirror Frame Listing #4302 Listed on: 2013-12-22 12:03:24

    Mantle
    Mantle Listing #4303 Listed on: 2013-12-22 12:04:52

    tri-fold mirror divider
    tri-fold mirror divider Listing #404 Listed on: 2006-08-20 18:49:37

    Bamboo Kitchen
    Bamboo Kitchen Listing #2372 Listed on: 2009-11-03 22:11:49

    Pokeworks - University Mall Tampa, FL
    Pokeworks - University Mall Tampa, FL Listing #5135 Listed on: 2019-12-30 19:47:22

    Kitchen Island
    Kitchen Island Listing #3751 Listed on: 2012-02-29 21:44:18

    Complicated oak Veneer - water damage
    Complicated oak Veneer - water damage Listing #5274 Listed on: 2022-05-18 10:18:38

    Shaker Huntboard
    Shaker Huntboard Listing #4177 Listed on: 2013-08-03 12:25:33

    Spanish Cedar Mantle
    Spanish Cedar Mantle Listing #4385 Listed on: 2014-04-06 19:15:04

    How to Make Bedroom Cabinets for Everything
    How to Make Bedroom Cabinets for Everything Listing #3864 Listed on: 2012-04-28 13:35:18

    Knights Of The Card Table
    Knights Of The Card Table Listing #2942 Listed on: 2010-10-17 21:25:53

    Van Gogh Pittsburgh Bridge Photo Spot
    Van Gogh Pittsburgh Bridge Photo Spot Listing #5247 Listed on: 2021-11-25 07:58:54

    Walnut Dresser and Night Stands
    Walnut Dresser and Night Stands Listing #3867 Listed on: 2012-04-30 23:40:56

    Side table
    Side table Listing #1485 Listed on: 2008-10-11 18:58:54

    marble top tables
    marble top tables Listing #1831 Listed on: 2009-02-13 22:23:40

    Custom Millwork Vanity
    Custom Millwork Vanity Listing #4031 Listed on: 2013-01-10 13:13:42

    Game table
    Game table Listing #1866 Listed on: 2009-02-17 15:22:36

    Oak Table Detail
    Oak Table Detail Listing #4593 Listed on: 2015-05-15 18:59:25

    Solid Surface Chess Table
    Solid Surface Chess Table Listing #1465 Listed on: 2008-09-26 06:31:38

    Spalted Oak Plant Stand
    Spalted Oak Plant Stand Listing #2577 Listed on: 2010-02-18 09:29:49

    Mappa Burl Media Unit
    Mappa Burl Media Unit Listing #3429 Listed on: 2011-09-09 16:43:54

    Blanket Display Case
    Blanket Display Case Listing #2746 Listed on: 2010-05-19 12:50:11

    Mesquite bench
    Mesquite bench Listing #5020 Listed on: 2018-07-21 07:33:55

    Tree Bench/Swing
    Tree Bench/Swing Listing #2231 Listed on: 2009-08-02 20:57:43

    Shoe Shelf
    Shoe Shelf Listing #4373 Listed on: 2014-03-24 05:53:40

    911 Center
    911 Center Listing #3065 Listed on: 2011-01-13 18:25:19

    gun cabnets
    gun cabnets Listing #1922 Listed on: 2009-03-06 18:32:42

    Walnut and Pine Magazine Holder
    Walnut and Pine Magazine Holder Listing #2180 Listed on: 2009-07-02 23:15:29

    desk file cab
    desk file cab Listing #1904 Listed on: 2009-03-01 10:56:00

    walnut chest
    walnut chest Listing #1834 Listed on: 2009-02-14 09:01:39

    TV Cabinet
    TV Cabinet Listing #3382 Listed on: 2011-07-11 20:36:55

    MY ALPHACAM PROYECTS
    MY ALPHACAM PROYECTS Listing #4918 Listed on: 2017-07-13 11:16:59

    Simple Built-In
    Simple Built-In Listing #2753 Listed on: 2010-05-25 23:12:15

    Standard Pergola Kit
    Standard Pergola Kit Listing #3954 Listed on: 2012-08-16 09:16:39

    Radius Wood Wall & 3Form
    Radius Wood Wall & 3Form Listing #2032 Listed on: 2009-04-16 01:59:35

    End Table
    End Table Listing #3213 Listed on: 2011-03-26 23:28:46

    Fire Logo Table
    Fire Logo Table Listing #4920 Listed on: 2017-07-17 22:56:51

    Woodland Bench
    Woodland Bench Listing #1546 Listed on: 2008-11-08 23:27:25

    Electric Bass
    Electric Bass Listing #1428 Listed on: 2008-08-26 09:21:22

    Sofa table
    Sofa table Listing #1867 Listed on: 2009-02-17 15:26:59

    Dinning table and chairs
    Dinning table and chairs Listing #1883 Listed on: 2009-02-22 07:36:30

    Wall Unit.
    Wall Unit. Listing #5048 Listed on: 2018-11-28 17:08:24

    Parlor 632 mm
    Parlor 632 mm Listing #4988 Listed on: 2018-01-27 19:35:55

    Rocking Horse
    Rocking Horse Listing #2346 Listed on: 2009-10-22 08:39:54

    Custom Pine Headboard and Window Frame
    Custom Pine Headboard and Window Frame Listing #1776 Listed on: 2009-01-26 19:33:06

    Custom Bathroom
    Custom Bathroom Listing #5153 Listed on: 2020-02-09 00:33:56

    French Country Table w Queen Anne Legs
    French Country Table w Queen Anne Legs Listing #4990 Listed on: 2018-02-03 08:31:13

    walnut table
    walnut table Listing #4632 Listed on: 2015-08-05 01:19:33

    Shawdow Box Table
    Shawdow Box Table Listing #4420 Listed on: 2014-06-28 11:43:44

    Chicago Custom Kitchen
    Chicago Custom Kitchen Listing #1514 Listed on: 2008-10-28 10:15:09

    Piece For The Church Cabinet
    Piece For The Church Cabinet Listing #3861 Listed on: 2012-04-26 11:33:30

    Coffered Ceiling
    Coffered Ceiling Listing #3450 Listed on: 2011-09-28 17:31:18

    Glider
    Glider Listing #2285 Listed on: 2009-09-10 14:45:25

    Coffee Bar
    Coffee Bar Listing #2981 Listed on: 2010-11-25 07:29:37

    Corner cabinet
    Corner cabinet Listing #1988 Listed on: 2009-03-29 19:39:44

    Bathroom Vanity
    Bathroom Vanity Listing #5150 Listed on: 2020-02-06 22:14:41

    Kitchen Cabinet Refacing- Maple Stained Wenge
    Kitchen Cabinet Refacing- Maple Stained Wenge Listing #3140 Listed on: 2011-02-01 03:45:49

    Bamboo kitchen
    Bamboo kitchen Listing #4207 Listed on: 2013-09-07 18:26:18

    cherry kitchen
    cherry kitchen Listing #2017 Listed on: 2009-04-11 17:03:58

    Curved Interior Railing - Regina
    Curved Interior Railing - Regina Listing #5410 Listed on: 2024-01-29 12:16:37

    Symbol
    Symbol Listing #3859 Listed on: 2012-04-26 02:54:19

    Mouse and Monitor Stand
    Mouse and Monitor Stand Listing #4756 Listed on: 2016-05-10 11:28:10

    The Icon of St. Nikolay
    The Icon of St. Nikolay Listing #3894 Listed on: 2012-06-04 17:33:31

    Maple Mantle
    Maple Mantle Listing #2026 Listed on: 2009-04-13 23:52:39

    Millwork Shop Drawings
    Millwork Shop Drawings Listing #4024 Listed on: 2013-01-05 17:19:36

    custom ceder bench
    custom ceder bench Listing #4977 Listed on: 2017-12-31 12:22:56

    Maple Stained Cherry Cabinet Refacing Project
    Maple Stained Cherry Cabinet Refacing Project Listing #3139 Listed on: 2011-02-01 03:24:13

    Finger Jointed Boxes
    Finger Jointed Boxes Listing #4430 Listed on: 2014-07-14 16:31:16

    new ideas
    new ideas Listing #2980 Listed on: 2010-11-22 23:36:58

    christmas tree
    christmas tree Listing #1380 Listed on: 2008-07-26 22:57:31

    3rd Floor railing and gate
    3rd Floor railing and gate Listing #720 Listed on: 2007-06-06 11:25:19

    Carved Walut Kitchen
    Carved Walut Kitchen Listing #269 Listed on: 2006-01-12 18:45:28

    Modern LCD Wall Unit
    Modern LCD Wall Unit Listing #3630 Listed on: 2011-12-02 12:37:14

    Curved Patio Cover
    Curved Patio Cover Listing #3448 Listed on: 2011-09-26 19:08:04

    Hand Carved Walnut Entertainment Center
    Hand Carved Walnut Entertainment Center Listing #2609 Listed on: 2010-02-27 19:14:11

    Display Cabinets for Guitar Store
    Display Cabinets for Guitar Store Listing #1312 Listed on: 2008-06-12 00:54:14

    Traditional Kitchen
    Traditional Kitchen Listing #3113 Listed on: 2011-01-24 11:29:45

    bedroom remodel
    bedroom remodel Listing #865 Listed on: 2007-10-02 09:27:43

    custom entertainment center
    custom entertainment center Listing #1628 Listed on: 2008-12-14 19:43:43

    Glass Door Cabinets
    Glass Door Cabinets Listing #2881 Listed on: 2010-09-02 01:36:42

    Custom Kitxhen in Elgin IL
    Custom Kitxhen in Elgin IL Listing #4813 Listed on: 2016-09-03 23:37:57

    Floating Shelves
    Floating Shelves Listing #4009 Listed on: 2012-11-27 19:22:17

    Good Friday Cross
    Good Friday Cross Listing #3675 Listed on: 2012-01-04 14:44:15

    Custom Built-Ins in a doctors office
    Custom Built-Ins in a doctors office Listing #1784 Listed on: 2009-01-29 23:41:51

    Small Icon of God
    Small Icon of God Listing #3852 Listed on: 2012-04-26 02:24:55

    Wagon Wheel Window
    Wagon Wheel Window Listing #4611 Listed on: 2015-06-15 23:22:02

    Built-in desk
    Built-in desk Listing #3004 Listed on: 2010-12-09 10:44:13

    Walnut & Cypress Glider
    Walnut & Cypress Glider Listing #3147 Listed on: 2011-02-03 21:02:42

    Zebrano Entertainment Center
    Zebrano Entertainment Center Listing #4649 Listed on: 2015-08-26 13:59:43

    Historically matched doors
    Historically matched doors Listing #1653 Listed on: 2008-12-25 13:07:35

    Mahogany Bookcase
    Mahogany Bookcase Listing #2846 Listed on: 2010-08-05 16:13:02

    Atomic
    Atomic Listing #3631 Listed on: 2011-12-02 21:42:12

    Highboy Entertainment Center
    Highboy Entertainment Center Listing #2628 Listed on: 2010-03-06 09:21:04

    Walnut Chair with Laptop Table
    Walnut Chair with Laptop Table Listing #4533 Listed on: 2015-02-25 15:44:21

    Elegant Chairs
    Elegant Chairs Listing #5130 Listed on: 2019-12-17 20:12:33

    Bubinga Entertainment Center
    Bubinga Entertainment Center Listing #4650 Listed on: 2015-08-26 14:02:43

    Cherry Cabinet Humidor
    Cherry Cabinet Humidor Listing #443 Listed on: 2006-10-31 13:24:12

    Cypress swing
    Cypress swing Listing #3802 Listed on: 2012-03-30 17:03:56

    Digital Piano Stand
    Digital Piano Stand Listing #4152 Listed on: 2013-06-04 13:07:20

    The Cross
    The Cross Listing #3895 Listed on: 2012-06-04 17:35:16

    Mantels With Side Built-ins
    Mantels With Side Built-ins Listing #2603 Listed on: 2010-02-27 08:46:04

    mahogany entertainment center
    mahogany entertainment center Listing #442 Listed on: 2006-10-31 13:18:27

    Hyatt Regency Washington Installation
    Hyatt Regency Washington Installation Listing #1794 Listed on: 2009-02-03 06:12:36

    Reclaimed wood dining table
    Reclaimed wood dining table Listing #5024 Listed on: 2018-07-21 08:39:45

    Grandfather Clock
    Grandfather Clock Listing #4185 Listed on: 2013-08-15 13:20:00

    Sinker Cypress lamps
    Sinker Cypress lamps Listing #2366 Listed on: 2009-11-02 14:27:54

    Ipe Deck
    Ipe Deck Listing #1711 Listed on: 2009-01-14 16:21:22

    Estate cabinet
    Estate cabinet Listing #1323 Listed on: 2008-06-20 12:04:18

    Custom Desk Chair with Arms
    Custom Desk Chair with Arms Listing #1801 Listed on: 2009-02-05 21:44:34

    Custom Entertainment Center
    Custom Entertainment Center Listing #4150 Listed on: 2013-06-04 12:55:18

    Drawing Review Tables
    Drawing Review Tables Listing #2324 Listed on: 2009-10-02 19:40:10

    Modern Kitchen, 1/4" revel lap-siding doors
    Modern Kitchen, 1/4" revel lap-siding doors Listing #1344 Listed on: 2008-07-04 14:14:09

    A small box
    A small box Listing #1479 Listed on: 2008-10-10 18:47:51

    Cabinet Refacing Chicago
    Cabinet Refacing Chicago Listing #1439 Listed on: 2008-09-06 01:34:50

    Urban Residence
    Urban Residence Listing #4589 Listed on: 2015-05-15 18:42:21

    Refinish Office Furniture
    Refinish Office Furniture Listing #5405 Listed on: 2024-01-23 19:14:22

    Redwood Headboard
    Redwood Headboard Listing #2224 Listed on: 2009-07-31 12:22:49

    Redwood Headboard and Sink
    Redwood Headboard and Sink Listing #2210 Listed on: 2009-07-27 09:30:45

    Round End Table
    Round End Table Listing #2444 Listed on: 2009-12-14 16:32:57

    Cat Crypt/Home Altar
    Cat Crypt/Home Altar Listing #3372 Listed on: 2011-07-01 01:07:02

    Repairs and Touch-up
    Repairs and Touch-up Listing #5408 Listed on: 2024-01-23 19:42:37

    Two Cradles
    Two Cradles Listing #1214 Listed on: 2008-03-25 20:24:27

    Bowls and Boxes...
    Bowls and Boxes... Listing #4853 Listed on: 2017-02-10 17:23:32

    Flag Shadow Box
    Flag Shadow Box Listing #4151 Listed on: 2013-06-04 13:02:29

    Built-In Entertainment Area
    Built-In Entertainment Area Listing #2714 Listed on: 2010-04-21 10:43:00

    Cherry Bookcase
    Cherry Bookcase Listing #4648 Listed on: 2015-08-26 13:53:44

    Door Repair
    Door Repair Listing #5403 Listed on: 2024-01-23 19:03:21

    Ash Mantle
    Ash Mantle Listing #1997 Listed on: 2009-04-01 09:11:24

    Restaurant Interior
    Restaurant Interior Listing #709 Listed on: 2007-05-27 13:19:01

    Media center
    Media center Listing #5021 Listed on: 2018-07-21 07:40:23

    River recovered heartpine flooring
    River recovered heartpine flooring Listing #1948 Listed on: 2009-03-12 20:29:49

    Kitchen pantry
    Kitchen pantry Listing #1951 Listed on: 2009-03-13 03:34:27

    Stand table
    Stand table Listing #1480 Listed on: 2008-10-10 19:08:47

    Bi-fold Doors
    Bi-fold Doors Listing #2338 Listed on: 2009-10-14 12:05:34

    Lobby Group
    Lobby Group Listing #4596 Listed on: 2015-05-16 17:04:37

    Six Leg Coffee Table
    Six Leg Coffee Table Listing #2457 Listed on: 2009-12-21 18:33:04

    Arched Top Vanity Mirrors
    Arched Top Vanity Mirrors Listing #1943 Listed on: 2009-03-11 15:04:17

    grandfather clock
    grandfather clock Listing #1832 Listed on: 2009-02-13 22:42:55

    Lyptus and Curly Maple Vanity and Mirror
    Lyptus and Curly Maple Vanity and Mirror Listing #716 Listed on: 2007-06-05 22:25:25

    Traditional Kitchen
    Traditional Kitchen Listing #2348 Listed on: 2009-10-22 12:20:14

    Buffet Cabinet
    Buffet Cabinet Listing #4489 Listed on: 2014-11-16 23:22:19

    Pine bookcase
    Pine bookcase Listing #1272 Listed on: 2008-05-03 11:34:00

    cherry media center
    cherry media center Listing #1082 Listed on: 2008-02-05 13:35:11

    Saturday Table
    Saturday Table Listing #4535 Listed on: 2015-03-01 11:57:51

    Water damage
    Water damage Listing #5406 Listed on: 2024-01-23 19:24:25

    Burl species
    Burl species Listing #5266 Listed on: 2022-03-17 11:30:34

    Barn Door
    Barn Door Listing #5118 Listed on: 2019-11-21 23:21:53

    Simple Vanity
    Simple Vanity Listing #2610 Listed on: 2010-02-27 19:15:33

    Redwood Sink
    Redwood Sink Listing #2225 Listed on: 2009-07-31 12:26:41

    Pullout Pantry
    Pullout Pantry Listing #2880 Listed on: 2010-09-02 01:33:15

    Coffee Table with Drawer
    Coffee Table with Drawer Listing #2369 Listed on: 2009-11-02 15:57:31

    Knotty pine bar w/marble top
    Knotty pine bar w/marble top Listing #253 Listed on: 2005-12-18 02:24:17

    cherry built in
    cherry built in Listing #1281 Listed on: 2008-05-08 21:43:08

    Mahogany Dining Table
    Mahogany Dining Table Listing #1073 Listed on: 2008-02-03 10:14:41

    Traditional Bath
    Traditional Bath Listing #4591 Listed on: 2015-05-15 18:52:21

    wood carving by hand Lion Head Double Doors onlays
    wood carving by hand Lion Head Double Doors onlays Listing #5069 Listed on: 2019-03-21 19:21:11

    Custom China Cabinet
    Custom China Cabinet Listing #4639 Listed on: 2015-08-07 14:42:15

    Night Stand
    Night Stand Listing #3158 Listed on: 2011-02-11 09:45:00

    50 inch Intarsia Eagle
    50 inch Intarsia Eagle Listing #2474 Listed on: 2009-12-25 16:08:19

    Stairwell
    Stairwell Listing #4598 Listed on: 2015-05-16 17:12:10

    Tall Night Stand
    Tall Night Stand Listing #3696 Listed on: 2012-01-15 09:37:01

    Bathroom Partitions
    Bathroom Partitions Listing #1071 Listed on: 2008-02-02 10:38:55

    Colorful Finishes
    Colorful Finishes Listing #3806 Listed on: 2012-04-01 16:02:02

    Bar Chair
    Bar Chair Listing #4153 Listed on: 2013-06-04 13:20:29

    Intarsia Panther
    Intarsia Panther Listing #2477 Listed on: 2009-12-25 17:17:50

    Custom Display Cases
    Custom Display Cases Listing #1227 Listed on: 2008-03-31 23:36:49

    Mission style cabinet
    Mission style cabinet Listing #1675 Listed on: 2009-01-01 15:57:55

    Custom Bookshelves
    Custom Bookshelves Listing #2883 Listed on: 2010-09-02 01:44:09

    Newel Post
    Newel Post Listing #4879 Listed on: 2017-04-27 17:02:23

    kitchen island
    kitchen island Listing #826 Listed on: 2007-08-22 21:20:08

    Baby Dresser
    Baby Dresser Listing #3046 Listed on: 2011-01-11 19:38:51

    computer desk
    computer desk Listing #2517 Listed on: 2010-01-13 21:06:25

    Dresser
    Dresser Listing #3219 Listed on: 2011-03-30 12:58:52

    Garden Bench
    Garden Bench Listing #2843 Listed on: 2010-08-04 16:50:31

    A Rising Sun
    A Rising Sun Listing #715 Listed on: 2007-06-05 01:08:15

    Spice Cabinet
    Spice Cabinet Listing #3658 Listed on: 2011-12-22 20:16:35

    plant stand
    plant stand Listing #2636 Listed on: 2010-03-12 16:02:01

    bed room suit
    bed room suit Listing #2441 Listed on: 2009-12-14 07:35:01

    Hyatt Regency Washington Installation
    Hyatt Regency Washington Installation Listing #1796 Listed on: 2009-02-03 06:17:49

    Entertainment Table
    Entertainment Table Listing #263 Listed on: 2006-01-03 12:21:33

    Eucalyptus block tale
    Eucalyptus block tale Listing #5022 Listed on: 2018-07-21 08:17:46

    walnut and magh. trunck
    walnut and magh. trunck Listing #1923 Listed on: 2009-03-06 18:45:19

    Red Oak Bookcase
    Red Oak Bookcase Listing #4184 Listed on: 2013-08-15 11:13:59

    Custom Home Office
    Custom Home Office Listing #1785 Listed on: 2009-01-29 23:44:57

    handrail
    handrail Listing #1260 Listed on: 2008-04-21 12:05:47

    Kitchenette
    Kitchenette Listing #2732 Listed on: 2010-05-11 11:40:04

    Walnut Desk
    Walnut Desk Listing #1343 Listed on: 2008-07-02 21:18:54

    Country hutch
    Country hutch Listing #5002 Listed on: 2018-03-31 13:24:09

    White oak buffet hutch
    White oak buffet hutch Listing #1862 Listed on: 2009-02-17 14:56:49

    Walnut & Cherry Herringbone Table
    Walnut & Cherry Herringbone Table Listing #5363 Listed on: 2023-08-16 14:45:03

    Redwood Shelf
    Redwood Shelf Listing #2226 Listed on: 2009-07-31 12:32:40

    Wine Rack
    Wine Rack Listing #2299 Listed on: 2009-09-16 14:35:19

    Oak Glider
    Oak Glider Listing #3272 Listed on: 2011-04-24 18:55:48

    glass doors
    glass doors Listing #1962 Listed on: 2009-03-18 10:12:27

    Glider
    Glider Listing #3797 Listed on: 2012-03-30 09:51:41

    Walnut Vanity
    Walnut Vanity Listing #4294 Listed on: 2013-12-22 11:27:44

    Kitchen Island
    Kitchen Island Listing #1736 Listed on: 2009-01-19 19:54:59

    Solid Cherry Hutch
    Solid Cherry Hutch Listing #3064 Listed on: 2011-01-13 18:22:26

    end table
    end table Listing #2440 Listed on: 2009-12-14 07:19:37

    Mantel ( Contemporary)
    Mantel ( Contemporary) Listing #787 Listed on: 2007-07-20 15:47:44

    Glider Chair
    Glider Chair Listing #3159 Listed on: 2011-02-11 09:47:33

    Custom China cabinet
    Custom China cabinet Listing #4877 Listed on: 2017-04-21 20:16:35

    Work station
    Work station Listing #5023 Listed on: 2018-07-21 08:30:42

    Entertainment Center/Desk
    Entertainment Center/Desk Listing #2613 Listed on: 2010-02-28 09:40:34

    euro beech & afro mahogany jewel box
    euro beech & afro mahogany jewel box Listing #453 Listed on: 2006-11-12 16:26:51

    Trash Can Cabinet
    Trash Can Cabinet Listing #3059 Listed on: 2011-01-13 17:56:08

    Entry Doors
    Entry Doors Listing #2837 Listed on: 2010-07-31 09:29:27

    Custom Full Inset Kitchen Painted White and Mahogany
    Custom Full Inset Kitchen Painted White and Mahogany Listing #5094 Listed on: 2019-07-15 14:09:43

    Kitchen Project
    Kitchen Project Listing #167 Listed on: 2005-01-21 09:38:29

    Large Painted Kitchen with Glazing
    Large Painted Kitchen with Glazing Listing #1079 Listed on: 2008-02-04 23:12:22

    Torres Classic
    Torres Classic Listing #4986 Listed on: 2018-01-27 13:04:22

    Live edge Hickory Gunrack
    Live edge Hickory Gunrack Listing #483 Listed on: 2006-12-17 11:35:01

    Interior Bath Door
    Interior Bath Door Listing #2750 Listed on: 2010-05-23 20:48:33

    Small Bathroom Remodel
    Small Bathroom Remodel Listing #2415 Listed on: 2009-11-26 11:06:16

    Blanket Chest
    Blanket Chest Listing #3746 Listed on: 2012-02-27 14:11:56

    Achitect new office
    Achitect new office Listing #1521 Listed on: 2008-10-30 14:25:50

    trunck
    trunck Listing #1907 Listed on: 2009-03-01 11:11:58

    curios
    curios Listing #1906 Listed on: 2009-03-01 11:07:39

    Cherry Breakfront
    Cherry Breakfront Listing #4594 Listed on: 2015-05-15 19:03:14

    Armoire
    Armoire Listing #264 Listed on: 2006-01-05 15:06:17

    Mirror Frame
    Mirror Frame Listing #2809 Listed on: 2010-07-01 21:30:09

    custom island and top
    custom island and top Listing #121 Listed on: 2004-03-29 01:07:40

    deco tree panels
    deco tree panels Listing #5137 Listed on: 2020-01-04 23:22:23

    Desk
    Desk Listing #3061 Listed on: 2011-01-13 18:06:32

    Painted Room End
    Painted Room End Listing #4595 Listed on: 2015-05-15 19:06:39

    Entertainment Center
    Entertainment Center Listing #191 Listed on: 2005-05-04 02:02:21

    Inset Doors with Beaded Faceframes
    Inset Doors with Beaded Faceframes Listing #1097 Listed on: 2008-02-10 00:30:05

    Cross
    Cross Listing #3201 Listed on: 2011-03-21 13:38:35

    Soapstone & Cherry
    Soapstone & Cherry Listing #2023 Listed on: 2009-04-13 12:36:44

    brackets
    brackets Listing #1571 Listed on: 2008-11-17 22:14:24

    Carved Mallard Door
    Carved Mallard Door Listing #245 Listed on: 2005-11-23 07:06:34

    African Mahogany End Table
    African Mahogany End Table Listing #237 Listed on: 2005-10-10 16:10:48

    Cherry fireplace
    Cherry fireplace Listing #1215 Listed on: 2008-03-25 22:05:46

    Baptist Church Remodel
    Baptist Church Remodel Listing #174 Listed on: 2005-02-16 21:56:24

    Dining Table
    Dining Table Listing #4628 Listed on: 2015-08-01 05:28:58

    Salvaged Lumber
    Salvaged Lumber Listing #162 Listed on: 2005-01-13 23:29:25

    Crumbling Castle - wood sculpture
    Crumbling Castle - wood sculpture Listing #487 Listed on: 2006-12-17 21:52:30

    Tip and turn tea table
    Tip and turn tea table Listing #987 Listed on: 2008-01-02 19:12:55

    Laser Engraved Log Bed
    Laser Engraved Log Bed Listing #1125 Listed on: 2008-02-18 11:59:17

    Shaker stool in cherry
    Shaker stool in cherry Listing #986 Listed on: 2008-01-02 19:03:54

    Curly Cherry and Oregon Walnut Bar Table
    Curly Cherry and Oregon Walnut Bar Table Listing #429 Listed on: 2006-10-08 15:41:57

    Entry Door
    Entry Door Listing #3660 Listed on: 2011-12-22 21:19:00

    The Bailey Kitchen
    The Bailey Kitchen Listing #852 Listed on: 2007-09-27 08:18:46

    European Style -Made in the USA
    European Style -Made in the USA Listing #1094 Listed on: 2008-02-09 23:52:53

    Hoods
    Hoods Listing #2186 Listed on: 2009-07-06 20:30:52

    Custom Dresser
    Custom Dresser Listing #1148 Listed on: 2008-02-23 01:44:31

    Various Project Renderings
    Various Project Renderings Listing #908 Listed on: 2007-10-28 11:27:45

    Cedar Burl Cottage Sign
    Cedar Burl Cottage Sign Listing #488 Listed on: 2006-12-18 00:00:47

    Small Bench Construction Video
    Small Bench Construction Video Listing #4862 Listed on: 2017-03-11 17:33:07

    GLASS CABINET/ BOOKCASE
    GLASS CABINET/ BOOKCASE Listing #805 Listed on: 2007-08-04 14:54:36

    Painted poplar Kitchen
    Painted poplar Kitchen Listing #991 Listed on: 2008-01-03 19:26:10

    Cabinets and Floor
    Cabinets and Floor Listing #131 Listed on: 2004-07-02 12:54:10

    Cherry Kitchen
    Cherry Kitchen Listing #1225 Listed on: 2008-03-31 16:34:12

    Spanish Cedar Entry
    Spanish Cedar Entry Listing #301 Listed on: 2006-03-11 17:44:19

    Built-in Dresser
    Built-in Dresser Listing #446 Listed on: 2006-11-05 11:20:12

    Step Pool Bridges @www.GardenBridges.biz
    Step Pool Bridges @www.GardenBridges.biz Listing #338 Listed on: 2006-04-18 16:09:25

    Aspire Camp at McGrews
    Aspire Camp at McGrews Listing #3761 Listed on: 2012-03-08 21:13:25

    Custom Bamboo Kitchen
    Custom Bamboo Kitchen Listing #3131 Listed on: 2011-01-29 22:17:39

    Custom Inset Doors with Beaded Faceframes
    Custom Inset Doors with Beaded Faceframes Listing #1134 Listed on: 2008-02-21 02:13:41

    Painted bench
    Painted bench Listing #915 Listed on: 2007-11-15 18:36:18

    And behind these doors
    And behind these doors Listing #448 Listed on: 2006-11-06 21:33:22

    Arts and crafts chest of drawers
    Arts and crafts chest of drawers Listing #1057 Listed on: 2008-01-28 22:40:16

    Ceiling Cloud
    Ceiling Cloud Listing #294 Listed on: 2006-02-24 17:55:32

    My first chair
    My first chair Listing #1038 Listed on: 2008-01-23 13:53:49

    6 Drawer Dresser
    6 Drawer Dresser Listing #1110 Listed on: 2008-02-12 08:55:51

    Mozart and Margarita Chair
    Mozart and Margarita Chair Listing #538 Listed on: 2007-01-31 23:45:25

    Chip Carving
    Chip Carving Listing #1221 Listed on: 2008-03-30 16:40:00

    Colony Hotel Signage
    Colony Hotel Signage Listing #474 Listed on: 2006-12-06 11:30:46

    Pool Table Coffee Table
    Pool Table Coffee Table Listing #405 Listed on: 2006-08-24 16:08:42

    Archway door
    Archway door Listing #190 Listed on: 2005-05-02 09:09:38

    Alder U-Shaped Office Desk
    Alder U-Shaped Office Desk Listing #193 Listed on: 2005-05-05 07:57:26

    Shaker Chest
    Shaker Chest Listing #1207 Listed on: 2008-03-21 07:06:24

    Morris chair
    Morris chair Listing #1060 Listed on: 2008-01-28 23:02:07

    Side Table
    Side Table Listing #5095 Listed on: 2019-08-17 23:39:01

    Large Designer Custom Kitchen
    Large Designer Custom Kitchen Listing #1095 Listed on: 2008-02-09 23:59:15

    Geogian urn table
    Geogian urn table Listing #1107 Listed on: 2008-02-12 05:38:50

    Red Cedar and Pine Log Wardrobe
    Red Cedar and Pine Log Wardrobe Listing #1124 Listed on: 2008-02-18 10:48:46

    Tiger hard maple bookcase
    Tiger hard maple bookcase Listing #1058 Listed on: 2008-01-28 22:44:10

    Home Ofiice / Guest Room Suite
    Home Ofiice / Guest Room Suite Listing #836 Listed on: 2007-09-04 14:03:39

    Writing desk / Chair / Stool/ Solid Maple, Wenga, Birdeye's, blo
    Writing desk / Chair / Stool/ Solid Maple, Wenga, Birdeye's, blo Listing #1064 Listed on: 2008-01-29 10:33:31

    Project samples
    Project samples Listing #1175 Listed on: 2008-03-06 07:40:22

    Cayenne Maple Kitchen
    Cayenne Maple Kitchen Listing #734 Listed on: 2007-06-11 00:33:41

    cypress gun cabinet
    cypress gun cabinet Listing #223 Listed on: 2005-08-12 08:47:09

    A Sheraton style wash stand
    A Sheraton style wash stand Listing #1103 Listed on: 2008-02-11 05:26:31

    For you W-H Fans
    For you W-H Fans Listing #460 Listed on: 2006-11-23 09:02:31

    Oak China Hutch
    Oak China Hutch Listing #295 Listed on: 2006-02-26 22:35:43

    oak & ash porch swing
    oak & ash porch swing Listing #361 Listed on: 2006-06-13 21:14:38

    Charity Mask CNC
    Charity Mask CNC Listing #492 Listed on: 2006-12-25 11:15:22

    Handcrafted Redwood Garden Bridges
    Handcrafted Redwood Garden Bridges Listing #320 Listed on: 2006-04-01 19:14:01

    Cherry side table with drawer
    Cherry side table with drawer Listing #1164 Listed on: 2008-02-28 14:07:20

    Wood room and cabinetry
    Wood room and cabinetry Listing #132 Listed on: 2004-07-03 19:13:47

    Custom Kitchen-Glenview
    Custom Kitchen-Glenview Listing #1159 Listed on: 2008-02-27 22:04:01

    Neoclassical curio cabinet
    Neoclassical curio cabinet Listing #1102 Listed on: 2008-02-11 04:59:21

    Wood range hood with display niche
    Wood range hood with display niche Listing #1139 Listed on: 2008-02-22 12:46:46

    Bathroom Vanity
    Bathroom Vanity Listing #974 Listed on: 2007-12-30 16:54:12

    Bookcase
    Bookcase Listing #1085 Listed on: 2008-02-06 00:54:30

    jetsons' mahogany bathroom vanity
    jetsons' mahogany bathroom vanity Listing #1013 Listed on: 2008-01-16 20:34:46

    Projects by John Looser
    Projects by John Looser Listing #211 Listed on: 2005-06-29 12:58:29

    Custom Quarter Sawn White Oak Bed
    Custom Quarter Sawn White Oak Bed Listing #1143 Listed on: 2008-02-23 01:28:31

    Mitered Cherry Kitchen.
    Mitered Cherry Kitchen. Listing #1017 Listed on: 2008-01-17 21:24:13

    Grandfather Clocks
    Grandfather Clocks Listing #5476 Listed on: 2025-10-22 08:09:12

    Shaker End Table
    Shaker End Table Listing #186 Listed on: 2005-04-15 10:43:26

    MAPLE AND WALNUT CABINET ON STAND
    MAPLE AND WALNUT CABINET ON STAND Listing #944 Listed on: 2007-12-11 08:36:07

    Queen Anne Chair
    Queen Anne Chair Listing #183 Listed on: 2005-04-01 01:15:12

    Knotty Alder Entry Door
    Knotty Alder Entry Door Listing #1183 Listed on: 2008-03-14 23:10:55

    Accessory Box's
    Accessory Box's Listing #134 Listed on: 2004-07-05 16:31:30

    Walnut Windsor chair
    Walnut Windsor chair Listing #922 Listed on: 2007-11-18 17:29:39

    Bath Vanity
    Bath Vanity Listing #1152 Listed on: 2008-02-26 21:28:00

    maple kitchen
    maple kitchen Listing #824 Listed on: 2007-08-19 13:17:27

    Media cabinet
    Media cabinet Listing #1059 Listed on: 2008-01-28 22:54:02

    4 projects
    4 projects Listing #573 Listed on: 2007-02-17 13:30:30

    Pair of chairs
    Pair of chairs Listing #470 Listed on: 2006-12-04 20:10:40

    Girls locker
    Girls locker Listing #949 Listed on: 2007-12-12 15:39:13

    communion table
    communion table Listing #357 Listed on: 2006-06-05 14:50:37

    Oak Bar
    Oak Bar Listing #181 Listed on: 2005-03-20 17:51:22

    parquet flooring
    parquet flooring Listing #498 Listed on: 2007-01-05 00:11:53

    Past Projects
    Past Projects Listing #266 Listed on: 2006-01-08 13:14:29

    Modern Maple Table
    Modern Maple Table Listing #180 Listed on: 2005-03-14 17:42:26

    Shaker Table
    Shaker Table Listing #1014 Listed on: 2008-01-16 20:37:23

    cherry tables
    cherry tables Listing #389 Listed on: 2006-07-28 16:32:10

    REINDEER
    REINDEER Listing #966 Listed on: 2007-12-21 14:19:04

    Cherry Libray
    Cherry Libray Listing #255 Listed on: 2005-12-22 21:33:28

    dining chair
    dining chair Listing #1237 Listed on: 2008-04-12 11:16:06

    Hancock Clock
    Hancock Clock Listing #1012 Listed on: 2008-01-16 20:28:31

    Game table
    Game table Listing #1061 Listed on: 2008-01-28 23:05:37

    Alder Kitchen
    Alder Kitchen Listing #1168 Listed on: 2008-03-01 10:24:23

    Corner E.T. Center
    Corner E.T. Center Listing #1093 Listed on: 2008-02-09 12:57:56

    petite rooltop
    petite rooltop Listing #542 Listed on: 2007-02-01 19:56:53

    Coffee Table
    Coffee Table Listing #379 Listed on: 2006-07-13 14:25:42

    Sideboard
    Sideboard Listing #1176 Listed on: 2008-03-06 11:24:49

    display case
    display case Listing #1236 Listed on: 2008-04-10 19:19:07

    Tie Fly Desk
    Tie Fly Desk Listing #337 Listed on: 2006-04-17 18:29:57

    Jewel box
    Jewel box Listing #1104 Listed on: 2008-02-12 03:09:08

    WALNUT CORNER TABLE
    WALNUT CORNER TABLE Listing #945 Listed on: 2007-12-11 08:44:46

    Vanities
    Vanities Listing #258 Listed on: 2005-12-22 22:19:14

    COMPUTER CABINET
    COMPUTER CABINET Listing #144 Listed on: 2004-08-14 10:06:53

    Door veiw
    Door veiw Listing #256 Listed on: 2005-12-22 21:49:51

    Mission chairs
    Mission chairs Listing #152 Listed on: 2004-10-27 18:41:22

    Couple More Jobs With CNC Router
    Couple More Jobs With CNC Router Listing #563 Listed on: 2007-02-11 16:46:18

    Wood sculpture
    Wood sculpture Listing #383 Listed on: 2006-07-20 18:18:55

    mantle
    mantle Listing #409 Listed on: 2006-08-29 22:46:27

    stereo
    stereo Listing #246 Listed on: 2005-11-25 21:19:21

    Dressers & Desk
    Dressers & Desk Listing #182 Listed on: 2005-03-29 15:43:44

    rockin' horse
    rockin' horse Listing #876 Listed on: 2007-10-09 22:02:33

    Custom
    Custom Listing #118 Listed on: 2004-02-21 10:32:30

      ---   Return to Top   ---   View More Results   


    Shop Gallery Results:


    Listing # Listed on:

      ---   Return to Top   ---   View More Results   


    Shop Built Equipment Gallery Results:

    FOSTER WORKBENCH AND FOSTER VISE
    FOSTER WORKBENCH AND FOSTER VISE Listing #91 Listed on: 2013-05-06 12:14:47

    Miter Saw Table
    Miter Saw Table Listing #210 Listed on: 2020-10-18 12:24:54

    Miter Saw Station
    Miter Saw Station Listing #208 Listed on: 2020-07-13 20:38:33

    Straight Line Rip Return Conveyor
    Straight Line Rip Return Conveyor Listing #153 Listed on: 2016-01-02 08:53:13

    Circle/Arch Cutting Jig
    Circle/Arch Cutting Jig Listing #71 Listed on: 2011-11-17 20:43:04

    My Shop Built Router Table
    My Shop Built Router Table Listing #52 Listed on: 2011-08-29 13:49:38

    Adjustable Height Workbench
    Adjustable Height Workbench Listing #118 Listed on: 2014-02-19 11:40:39

    Bandsaw Band Cleaner/Brusher
    Bandsaw Band Cleaner/Brusher Listing #180 Listed on: 2017-02-04 23:23:04

    Miter Saw Stand
    Miter Saw Stand Listing #81 Listed on: 2012-08-07 15:19:07

    Shop Built Linear Microadjuster
    Shop Built Linear Microadjuster Listing #54 Listed on: 2011-08-31 18:04:40

    Cart Project
    Cart Project Listing #200 Listed on: 2019-11-15 15:20:49

    Built in Dolly-Dust Collector
    Built in Dolly-Dust Collector Listing #151 Listed on: 2015-11-12 22:09:26

    Downdraft Table/Exhaust Vent
    Downdraft Table/Exhaust Vent Listing #64 Listed on: 2011-11-17 20:06:36

    Cabinet Door Clamping Jig
    Cabinet Door Clamping Jig Listing #22 Listed on: 2011-04-12 17:37:47

    Custom Curved Moulding Jigs
    Custom Curved Moulding Jigs Listing #20 Listed on: 2011-04-12 17:34:18

    How I cut tenons for a curved door
    How I cut tenons for a curved door Listing #34 Listed on: 2011-05-05 17:47:41

    Coping sled
    Coping sled Listing #44 Listed on: 2011-08-17 16:14:51

    Table saw cross cut sled
    Table saw cross cut sled Listing #128 Listed on: 2014-09-24 19:47:32

    Cope Jig for Shaper.
    Cope Jig for Shaper. Listing #181 Listed on: 2017-08-30 09:56:05

    Air-powered Variable Height Assembly Table
    Air-powered Variable Height Assembly Table Listing #57 Listed on: 2011-09-30 14:47:52

    B-20 Log Dog
    B-20 Log Dog Listing #73 Listed on: 2011-12-06 16:41:46

    Dust Collector Bin & Collector Dollies
    Dust Collector Bin & Collector Dollies Listing #150 Listed on: 2015-11-12 22:02:09

    4-sided moulding spraying support posts
    4-sided moulding spraying support posts Listing #186 Listed on: 2017-11-29 18:10:41

    Finishing A-frame lathe for doors
    Finishing A-frame lathe for doors Listing #184 Listed on: 2017-11-09 10:10:29

    Lifting hoist
    Lifting hoist Listing #207 Listed on: 2020-04-12 14:17:35

    Axiom AR8 Router Bit Storage Drawer
    Axiom AR8 Router Bit Storage Drawer Listing #213 Listed on: 2021-10-07 16:27:20

    Stable, economical drying racks
    Stable, economical drying racks Listing #185 Listed on: 2017-11-10 08:57:36

    Banding Rack attached to bander
    Banding Rack attached to bander Listing #111 Listed on: 2013-12-11 17:27:04

    Bandsaw Linebar
    Bandsaw Linebar Listing #201 Listed on: 2020-03-07 02:56:53

    quick setup and adjust featherboard
    quick setup and adjust featherboard Listing #75 Listed on: 2011-12-10 15:38:32

    Shaper sled
    Shaper sled Listing #203 Listed on: 2020-03-11 16:02:35

    Easy Zero Clearance Throatplate
    Easy Zero Clearance Throatplate Listing #53 Listed on: 2011-08-29 23:09:05

    Tenon Cutting Jig
    Tenon Cutting Jig Listing #31 Listed on: 2011-05-01 11:24:25

    Table saw deck
    Table saw deck Listing #88 Listed on: 2013-01-30 23:51:40

    Clamp Retrofits for Sliding Table Saw
    Clamp Retrofits for Sliding Table Saw Listing #195 Listed on: 2019-06-14 15:50:33

    Drying Rack
    Drying Rack Listing #69 Listed on: 2011-11-17 20:27:10

    Digital outboard fence for shaper
    Digital outboard fence for shaper Listing #43 Listed on: 2011-05-30 09:55:36

      ---   Return to Top   ---   View More Results   


    Sawmill Gallery Results:

    Burnt Shirt Wood Products
    Burnt Shirt Wood Products Listing #372 Listed on: 2011-06-28 23:19:25

    R. Jemithan Timber Frame Company
    R. Jemithan Timber Frame Company Listing #378 Listed on: 2011-08-15 19:54:06

    Eberlywoods
    Eberlywoods Listing #315 Listed on: 2010-07-29 00:45:34

    Woodlore, LLC
    Woodlore, LLC Listing #597 Listed on: 2020-01-21 22:05:02

    Brideck Enterprises Portable Sawmill Service
    Brideck Enterprises Portable Sawmill Service Listing #242 Listed on: 2009-09-15 23:51:55

    Woodchuck Sawmill & Lumber LLC
    Woodchuck Sawmill & Lumber LLC Listing #364 Listed on: 2011-05-10 20:32:17

    PDWoodbutchers
    PDWoodbutchers Listing #264 Listed on: 2009-12-04 11:24:12

    Waters Edge Woods
    Waters Edge Woods Listing #506 Listed on: 2014-03-10 14:02:50

    Terrific Timbers LLC
    Terrific Timbers LLC Listing #335 Listed on: 2010-12-10 17:18:21

    Logs to Lumber, Inc.
    Logs to Lumber, Inc. Listing #199 Listed on: 2008-11-11 18:04:35

    Elk Mountain Custom Milling
    Elk Mountain Custom Milling Listing #257 Listed on: 2009-11-08 20:42:02

    Long island timberworks
    Long island timberworks Listing #325 Listed on: 2010-11-19 16:20:34

    Sonoma Millworks
    Sonoma Millworks Listing #504 Listed on: 2014-02-27 15:32:25

    Pony Creek Mill & Woodworking
    Pony Creek Mill & Woodworking Listing #449 Listed on: 2012-09-26 23:27:13

    Mountain Creek Designs
    Mountain Creek Designs Listing #510 Listed on: 2014-05-01 10:25:12

    Riephoff Sawmill
    Riephoff Sawmill Listing #559 Listed on: 2017-04-26 14:31:03

    Dead Wood lumber Company
    Dead Wood lumber Company Listing #500 Listed on: 2013-11-29 21:13:14

    The Wood Doctor
    The Wood Doctor Listing #456 Listed on: 2012-12-09 20:12:58

    Esand Furniture
    Esand Furniture Listing #476 Listed on: 2013-04-11 20:05:09

    Mann's Lumber & Tree
    Mann's Lumber & Tree Listing #460 Listed on: 2012-12-14 21:12:01

    Water Or Wood, LLC
    Water Or Wood, LLC Listing #248 Listed on: 2009-10-02 23:39:29

    john ormsby
    john ormsby Listing #441 Listed on: 2012-08-19 08:30:50

    Kentucky Forest Products
    Kentucky Forest Products Listing #377 Listed on: 2011-08-04 09:11:43

    Da Slabba
    Da Slabba Listing #572 Listed on: 2017-09-13 18:36:23

    Barrack Farms
    Barrack Farms Listing #509 Listed on: 2014-04-30 10:24:50

    Houzez Mobile
    Houzez Mobile Listing #665 Listed on: 2025-07-07 09:37:48

    Currituck Millworks
    Currituck Millworks Listing #150 Listed on: 2008-06-05 07:03:26

    https://turbosawmill.com
    https://turbosawmill.com Listing #630 Listed on: 2024-03-22 20:32:18

    The Tree Trunk Sawmill and Woodshop
    The Tree Trunk Sawmill and Woodshop Listing #638 Listed on: 2024-06-21 12:52:47

    DendroTechnology
    DendroTechnology Listing #601 Listed on: 2021-12-18 00:13:29

    native lumber company
    native lumber company Listing #413 Listed on: 2012-03-05 19:18:05

    Maryland Horse Fencing
    Maryland Horse Fencing Listing #433 Listed on: 2012-06-22 17:42:42

    Clancy's Custom Hardwood and Tree Service
    Clancy's Custom Hardwood and Tree Service Listing #591 Listed on: 2019-10-05 15:45:25

    Out of the Woods
    Out of the Woods Listing #586 Listed on: 2019-02-13 16:32:21

    Old Growth Riverwood
    Old Growth Riverwood Listing #189 Listed on: 2008-09-28 23:36:32

    Aqua Quest International
    Aqua Quest International Listing #567 Listed on: 2017-06-07 12:27:47

    UNCLE BUCK CARVINS
    UNCLE BUCK CARVINS Listing #579 Listed on: 2018-07-25 15:53:54

    T.S.M. Farms
    T.S.M. Farms Listing #524 Listed on: 2015-02-28 22:37:23

    Lumber One
    Lumber One Listing #569 Listed on: 2017-07-29 15:20:52

    Hewn
    Hewn Listing #554 Listed on: 2016-12-27 16:22:23

    Tosa Tomo Designs
    Tosa Tomo Designs Listing #422 Listed on: 2012-04-20 09:40:01

    Lee's Custom Lumber
    Lee's Custom Lumber Listing #415 Listed on: 2012-03-25 21:38:33

    Scomil VI Woodmill
    Scomil VI Woodmill Listing #637 Listed on: 2024-06-07 03:30:41

    Morgan's Custom Sawmill
    Morgan's Custom Sawmill Listing #581 Listed on: 2018-10-10 08:57:49

    Sand Dollar Woodworks
    Sand Dollar Woodworks Listing #190 Listed on: 2008-10-12 08:20:57

    Southern Indiana Sawmill
    Southern Indiana Sawmill Listing #552 Listed on: 2016-11-17 16:59:13

    Pacific Rim Trading Co.
    Pacific Rim Trading Co. Listing #549 Listed on: 2016-08-20 22:16:05

    Forest All
    Forest All Listing #436 Listed on: 2012-07-15 07:08:59

    Log 2 Lumber LLC
    Log 2 Lumber LLC Listing #478 Listed on: 2013-05-06 22:49:55

    Minnesota Millers
    Minnesota Millers Listing #608 Listed on: 2023-02-17 12:19:55

    Horigan Urban Forest Products, Inc.
    Horigan Urban Forest Products, Inc. Listing #599 Listed on: 2021-06-22 14:32:56

      ---   Return to Top   ---   View More Results   


    Sawing and Drying Directory Results:


    Listing #8 Listed on:

      ---   Return to Top   ---   View More Results