• Knowledge Base Search Results: 33
    • Your search for van brussel found 33 documents (of 13219 searched).
    1-33 of the 33 results are displayed below.


    Knowledge Base Results:

    Tape Issues when Joining Veneer
    Veneer tape can cause minor defects at the seam. Here are some suggestions for preventing that problem. March 31, 2008

    An Antique Wood Scraper
    Woodworkers puzzle over an old piece of shop iron and share some old-time lore. September 28, 2006

    Troubleshooting Bowing in Engineered Flooring Layups
    Veneer balancing issues, as well as glue characteristics, could explain why laminated engineered wood flooring panels are curling badly. December 29, 2008

    Stitches Telegraphing Through Cherry Veneer
    Veneer pros help troubleshoot an puzzling bleed-through problem: stitches showing through over time in a Cherry veneer layup. January 11, 2007

    Glues Interfering With Water-Borne Stain on Veneer
    Advice on fixing a problem where glued veneer seams telegraph through water-borne stain finishes. June 9, 2007

    Producing Wide, Thick Veneer
    Pros share ideas for making maple and birch veneer at 2-foot width and 1/8-inch thickness. April 14, 2005

    Production de placages larges et épais
    Des professionnels partagent leurs idées pour la fabrication de placages d'érable et de bouleau de 60 cm de large et 3 mm d'épaisseur. 14 avril 2005

    Applying Veneer to an Automobile Dashboard
    Veneer pros discuss vacuum bag and other techniques for making veneer conform to a three-dimensional surface like the gauge panel of a Jaguar automobile dashboard. August 8, 2010

    Veneering a Half Cylinder
    Detailed comments on the choices relating to cauls, glue, vacuum bags, and other elements of veneering a half-cylinder. December 6, 2011

    Sanding Veneer to Thickness
    Detailed advice on how to thickness-sand veneer with mid-range equipment. June 9, 2007

    Repairing Dents in Heated Veneer Press Platens
    Repairs and workarounds may help (a full replacement would be costly). March 28, 2012

    Veneering with a Clamp-and-Caul Setup
    Veneering a large panel is best done with a vacuum press, but here's a description of how to do it with clamps. April 10, 2007

    Veneer Cracking on Curved Doors
    Advice on glue and substrate choices for preventing cracks in veneer applied to a curved flexible-plywood substrate. June 28, 2006

    Troubleshooting a Vacuum Bag Leak
    Problems with vacuum pump operation in vacuum-bag veneering may be traceable to a leak in the bag. May 13, 2013

    Veneering a Cube
    Ideas for applying veneer to the outside of a box. November 14, 2009

    Shopping for an Edge-Gluing Veneer Splicer
    Advice (and some sales pitches) on veneer splicer options. April 18, 2010

    Veneer Panel Inlay Problem
    "Lumpy" veneer causes trouble when routing for veneer inlay. Rigid glue and panel sanding are the suggested solution. January 13, 2006

    Troubleshooting Expanding Veneer
    What makes veneer expand overnight after application? Pros suggest possible causes and remedies. May 13, 2005

    Heat Resistant Glue
    Choosing adhesive for use in a potentially hot (or warm) location. March 26, 2013

    Veneering the Inside of a Drum
    Instead of vacuum, use an inflatable tube to apply pressure. October 15, 2009

    Iron Stain Caused by Veneer Slicer
    Iron in steel slicer knives can cause staining of the product. August 8, 2010

    Urea Resin Glue on Paper-Backed Veneer
    Urea resin glue works well with paper-backed veneer (but scuff sand the paper first). October 19, 2013

    Dryer Screen Marks on Sliced Veneer
    Causes and cures for the "net-like" visual defect that sometimes appears on veneer. May 21, 2009

    Pie-Slicing a Log
    Quick description and info about a German-made saw that slices logs radially. July 15, 2012

    Prepping Raw Wood for PSA Veneer
    The PSA adhesive will adhere better if the wood is prefinished appropriately. November 16, 2011

    Troubleshooting Failure with an Iron-On Dried-Glue Veneer Application
    Pros discuss the probable reasons for bubbling of veneer that was applied using a hot iron and dried yellow glue. September 27, 2008

    Black Stains on Curly Cherry Veneer
    Figuring out the source of discoloration on a beautiful figured cherry veneer. June 28, 2006

    Veneer Glue Options
    Pros tell which glue types they like for vacuum-bag veneering work. July 28, 2006

    Getting a Good Bond with Paper-Backed Veneer
    Quick tips on adhesive choice, prepping the paper surface, and using cauls for more even pressure to achieve better adhesion. May 30, 2011

    Filling Torn Grain in Crotch Veneer
    Advice on making an invisible repair to a torn veneer. May 18, 2010

    Vacuum Bag Versus Frame Press
    A frame press may be more convenient for one man to operate when veneering flat panels. September 15, 2006

    Removing Glue Bleed-Through on Veneer
    Try your trusty scraper. November 27, 2007

    Removing Veneer Tape Staining
    Here's detailed advice on applying and removing veneer tape, and on sanding and finishing veneered panels afterwards. December 6, 2012

      ---   Return to Top   ---