Cefla PRIMA: RECIPROCATING SPRAYING MACHINE WITH ONE ARM - EXCELLENT CONDITION! UNDER 100 HOURS OF USE!
70 Extra Filter Bags
Machine designed with a solid structure - LASER 3D - complete with wide glass access doors.
Infeed reading system optimizing the spraying width by means of scanning barrier 135 photodiodes.
Vacuum belt conveying system with continuous, disposable paper belt.
Paper tension controlled by pneumatic system. Easily removable paper spools with 2500 m (8200 LF) length.
Ambient air inlet from the machine roof. Overspray exhaust through double downdraft filtration dry filters, placed at conveyor sides and mounted on extractable tank. Spraying axis driven by brushless motor and timing belt with ball bearings. The central axis carries one (1x) fixed gun support arm complete of height adjustment by manual set up. Predisposition for four (4x) guns mounts (fluid management; guns + pumps excluded). Four (4x) high pressure coating feeding circuits with recirculation and coating filter with stainless steel fittings: 3x colors + 1x solvent. Manual valves for color change.
Machine total length: 3400 mm - 11’-2’’
Machine total width: 4100 mm - 13’-5’’
Machine structure height: 2400 mm - 7’-11’’
Conveyor speed, adjustable by mean of inverter: 1-3 m/min. - 3’ to 10’ fpm
Maximum speed of guns holding unit: 140 m/min. - 450’ fpm
Drive motor power (flameproof execution): 0.37 kW
Guns handling system motor power: 2.2 kW
Suction motor power: 4.0 kW
Installed electric power (any complementary equipment: excluded): 7.6 kW
ATEX 2G execution, with explosion-proof motors. Compressed air consumption (fluid management; guns + pumps: excluded): 300 Nl/min. - 11 CFM
Air mixed up with solvents exhausted outside: 8000 mc/h - 4700 CFM