Used Edgebander Brandt

Listing #536877 Listed on: 07/25
Details - Machine for Sale
Category:Edge Banders Over $20K
Type:Used - Very Good
Model:AMBITION 1210
Location:Sanford, NC
Sale Type:Dealer
Seller:Andy Shook [Contact]
More Info:Link
.4 to 3 mm maximum edgebanding thickness capacity (coil or strip)
Edgeband length: Strips 9" minimum
8 min. to 50 mm max. panel thickness
Minimum panel length: 5-1/2"
Minimum panel width: 2-3/4"
Electronic EasyTouch program control
(2) 1 HP 12,000 RPM pre-milling units with diamond cutterheads
Diamond cutters capable of processing a max thickness of 40 mm

Automatic magazine for strip and coil feeding
Hot melt glue pot with 12 minute heat up time
Automatic temperature reduction feature (lowers the glue temperature if no panel is run over a 15-minute span)
Guillotine for cutting up to 3 mm PVC from the coil
Pressure station with (1) motorized pressure roller plus (2) additional idle pressure roller with digital setting system

1/4 HP 12,000 RPM double motor end trim
1/3 HP 12,000 RPM top and bottom trim station equipped with two DFC combination straight/radius cutter heads and digital readouts (three different working positions: flush trim, trimming with overhang, and radius/bevel trimming)
Top and bottom profile quick change scraping unit
Finish scraping unit

1-speed feed with speed of 36 FPM
Digital on top pressure beam for height indication
Adjustable infeed fence with digital readout
Automatic height adjustment with top pressure beam for all workstations
Digitals on top and bottom trim station
Dust extraction: (1) 120 mm, (3) 60 mm outlets, and (1) 100 mm outlet (1,650 cfm required)
Compressed air connection: 6 bar (85 psi)

Isolation transformer with variable infeed voltage for balancing all 3 phases of incoming power
Machine Weight: 3,150 lbs.
Machine dimensions: 12' long x 4' wide x 5' tall

S/N 0-261-02-6738 Cleaned and Checked


Contact this Seller (Andy Shook):

*Enter the correct numbers into the field below:

Date of your Birth:

In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.