This Komo Mach II 1205TT CNC Router has Dual Spindles with ATC and Dual Boring Heads. Fanuc Control with under 15000 Hrs on it. Fully maintained and has all the features to really dual process and pendulum process. Comes complete with professional removal, and loading onto a truck. This is the Komo that made them great with extremely low hours.
Machine Features:
Twin, Individually Controlled 16hp HSK 63F Air Cooled Spindles (24,000rpm)
Twin, 12 position Automatic Tool Changers with Aggregate Retention Block
HSK Tool Holders
(2) 20 Drill Boring Blocks (14 vertical and 6 horizontal)
2- 5x6' Aluminum Machined NEMI Matrix Grid Tables - Can combine for a single 12x5' table.
4 Zone Pop-up Pins for Multiple Part Placement in the Table
Rapid travel; 3150 ipm in X and Y/V axis'
Control is Fanuc 180-I-M
Remote Pedestal Cycle Start Station
Automatic Oil Lubrication on all Linear Ways and Ball Screws
Air Conditioned Control Cabinet
Vacuum pump is an enclosed Kaeser BSV 100 (25hp) The pump was installed in a separated room for cleanliness. It has been serviced regularly.
Machinery Associates Komo
