HOMAG OPTIMAT KAL 210/7/A20/S2 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
- Working Capacity: 0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-1/4"), panel thickness 12 - 60 mm, min. edge length 7.8".
- Infeed Section: (2) Pre-milling heads (each with 3 kW - 6,000 RPM motor, one with jump control); chip blowoff unit after last head; SIKO digitals for horizontal & turret for vertical adjustments;
Pre-heating infeed fence (for panel edge).
Automatic 2-coil feed magazine for coil material up to 3 mm thickness, strip feed magazine for up to 20 mm (3/4") solid wood banding.
"Quick Melt" glue system "QA 34" with per melt hopper feeder & roller applicator (reversible); pneumatic pressure roll section with (1) large dia. driven & (6) idle rollers.
Double motor front & rear end trim (0.7 HP - 12,000 RPM motor ea.), pneumatic chamfer setting.
Top & bottom rough trims (2 HP - 12,000 RPM motor ea.).
Top & bottom profile trim units for leading & trailing edge (four 0.6 HP - 12,000 RPM motors), up to 4 mm edge thickness (all trim station motors are 200 Cy HF and equipped w/electronic brakes).
Profile tracing from top, bottom and side for chamfering or rounding of pre-trimmed PVC edges; pneumatically controlled blowing nozzles; max. edge thickness 3 mm (1/8"), panel thickness 12 mm to 60 mm (15/32" to 2-3/8"); unit laterally adjustable by max. 50 mm (1-31/32"). Collection box for PVC shavings. ≈≈ Height adjustment with top pressure beam without tools; manually adjustable with digital mechanical counters.
Profile Edge Scraping Unit with electro-pneumatic adjustment.
Top and bottom buffing unit.
- Feed & Holddown System:
Motorized top pressure beam with powered V-belt holddown.
80 mm Wide Heavy Duty feed chain w/rubber pads, automatic chain track lubrication system.
5 HP Feed drive for variable feed speed of 23 - 98 FPM.
*** Please click the link for full description***
Homag kal 210/7/a20/s2 Edgebander