Used Edgebander SCM

Listing #536929 Listed on: 07/28
Details - Machine for Sale
Category:Edge Banders Over $20K
Type:Used - Excellent
Model:K 600 ER
Location:Sanford, NC
Sale Type:Dealer
Seller:Andy Shook [Contact]
More Info:Link
.4 mm to 8 mm (.016 to 5/16") edgebanding thickness
Guillotine capacity 3 mm
Feed speed 36 and 52 FPM (2.5 HP feed motor)
Panel thickness 3/8" min to 2-3/8" max.
Min. panel length 5-1/2"
Min. panel width 2"
Min. distance between panels 24"

"Startouch" Electronic Controller
Quick change/disconnect glue pot (approx. 8 to 10 minute heat time)
Pressure station with pneumatic driven roller and (2) spring loaded idle rollers
Strip feed magazine
Mechanical digital readout for positioning of pressure section

"K-SEL 2" end trim station with (2) independent .50 HP motors mounted on THK guides
(2) 1.0 HP top and bottom trim motors capable of tilting 0 to 25 degrees with copy wheels, 3-position pneumatics to go from 3 mm pvc to thin tape through the controller
"Round-K" corner rounding unit with (2) .80 HP independent motors that slide on THK guides

"RAS/K" profile scrape station for 3 mm PVC with pneumatic positioning
(2) .25 HP motor tiltable buffing units
Adjustable side support
Replaceable track pads
Digital inverter for electronic motor braking
Acoustical safety enclosure

Air Requirements: 90 PSI
Dust Collection: Working units are individually ported on the top of the safety enclosure for maximum efficiency
Machine weight: 4,400 lbs.

S/N AH/119900 Cleaned and Checked


Contact this Seller (Andy Shook):

*Enter the correct numbers into the field below:

Date of your Birth:

In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.