This Edgetech CTS740 countertop saw has a lot of options that increase ease of use and productivity. Its also came from a non-countertop shop and shows limited use. Up top you will find an Optional dual Laser alignment system that makes it easier to align the top before cutting. On either side of the saw you will find Optional 10′ infeed and outfeed conveyors allowing for support of material up to 136″ to either side of the blade. Between the conveyors and the saw you will Optional support rings that are helpful when cutting short tops. This saw also has the Optional variable miter with digital readout for cutting non-standard angles between 0° and 47°. Of course there are fixed stops at 22½°, 45° and 90°. All four routers have been replaced with NEW Dewalt DW616 routers for serviceability. This Edgetech CTS740 is powered by a 5 HP 3,460 RPM main motor and a 1/2 HP drive motor featuring variable feed speed 0 45 FPM with a 45 FPM fixed return speed. There are (4) independently positioned pneumatic hold downs for different top sizes. 5-3/4″ depth of cut with build-down; 3/4″ max. build-down and 4-7/8″ max. back splash height. It has a 45″ capacity cross-cut @ 90°, a 42″ capacity @ 22-1/2°, and a 31″ capacity at 45°.
In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.