4x10 CNC Router

Listing #536988 Listed on: 08/01
Details - Machine for Sale
Type:Used - Good
Model:Rover 24FT
Location:St. Charles, MO
Sale Type:Dealer
Seller:Dylan Bayliss [Contact]
More Info:Link
Moving Gantry Machine with 50.39 x 122 precision machined Bakelite (laminated plastic) flat table with (2) vacuum zones so can be operated like a twin table
X Axis travel = 122 (any unit), Y axis travel is 55 for routing, 50.4 for vertical drilling, and 36.1 for saw unit; Z axis stroke = 9.8 - 7 clearance so that a up to a 6.1 thick part can be loaded
10.2 HP Fully programmable cartridge type router spindle with ceramic bearings HSK-F63 variable speed from 1000 - 20,000 RPM, RH and LH programmable rotation, pneumatic stroke is on a prismatic linear guide for maximum strength and precision
(14) Independent vertical spindles at 32 mm center distance, 7 of which are placed along X axis and 7 along Y axis with oval cylinder for higher thrust; (3) units for horizontal opposed boring, (2) of which are placed along X axis and (1) along Y axis to perform horizontal drilling on the 4-panel sides. 2.3 hp inverter driven motor, spindle rotation speed 4000 rpm
**NO TOOL Changer and NO Vacuum PUMP**
The machine has 4 external pop-up reference pins that are mounted on the back of the table for locating parts. Includes (2) Side Stops (1) on the left side and (1) on the right side. On the front of each table there is the operational push buttons activating the start, stop, emergency, open and close clamp functions as well as vacuum meters for each individual zone
Closed Loop Yaskawa AC brushless servomotors with digital drive units. Top quality linear guides provide the high precision linear tracking systems for the X, Y and Z-axes. The X-axis drive system utilizes a hardened, helical rack with hardened preloaded pinions for backlash compensation. Hardened, precision ground, recirculating ball screw drives the Y and the Z-axis. All linear guide systems and axis drive systems are automatically lubricated by the central lubrication system that is programmable by the Numerical Control
The NC1000 Numerical Control is a PC, MS-Windows based technology featuring a unique double PC architecture: the PC front end for programming and operator interface, and a second PC as Real Time unit for PLC, and axis drives management. Remote keyboard for axes override and emergency push-button
Machine interface computer: Intel Celeron CPU 1.6 GHz, 128 MB Ram Memory; 20 GB Hard Disk, 15 Color Screen, USA Keyboard with 101 keys, Mouse; CD-Rom Reader, Operating System Microsoft Windows 2000 Professional XNC Controller and Software
The electrical cabinet is equipped with a 1500-Watt air conditioner


Contact this Seller (Dylan Bayliss):

*Enter the correct numbers into the field below:

Date of your Birth:

In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.