PRICE REDUCED!!!!!!!
Low Hours, Compact Loaded
Felder Tempora Edgebander
Featuring the following:
Chain feed Feed speed 9 m/min Drive motor 0.75KW (S1) Minimum workpiece width varies with workpiece length, height and surface finish
Minimum workpiece length 140 mm Segmented, rubber covered support pads with quick change system.
The minimum workpiece width varies with workpiece length, height and surface finish
Rotary tape coil D=740mm for tape coils 0.4-3 mm Rotary tape coil unit supported by ball bearings. Rotary plate diameter 740mm.
Workpiece feed feed guide m
Edge feed for coiled and strip edges in single feed
Pneumatic controlled, Teflon
coated glue applicator unit for 1.5kg EVA Granulate
with synchronized glue roller of PUR adhesive with regard to the adhesive processing guidelines.
Pressure roller unit application pneumatically controlled 1 roller and 1 rubber pressure roller manual adjustment
Guillotine scissors for tape coil with thickness between 0.4 to 3 mm
Pre-milling unit with immersion-controlled diamond milling cutters speed 12000 rpm 2x 1,1kW max. depth of cut 2 mm pre-milling cutters with diamond cutters Z2+2 D-80 x 49 mm
Upper multifunctional trimming unit
m-motion with manual adjustment by inserting the edge material Flush and radius trimming unit 1 high frequency motor 0.55 kW (1 HP) 12000 rpm.
Lower multifunctional trimming unit
motion with manual adjustment by inserting the edge material
Flush and radius trimming unit
1 high frequency motor 0.55 kW (1 HP) 12000 rpm.
Upper radius scraping unit
for processing 2 and 3 mm plastic edges. 1 WP cutter 2 and 3mm Manual release function. Manually adjustable.
Lower radius scraping unit
for processing 2 and 3 mm plastic edges. 1 WP cutter 2 and 3mm Manual release function. Manually adjustable.
Upper buffing unit Lower buffing unit
Electrics 3x230V 60Hz If the machine is equipped with a residual current
circuit-breaker (RCCB), then it must be a
Type B, sensitive to universal current
RCCB, suitable for frequency inverter
operation with a release current of 300mA.
Fan for electrical control box
Spraying unit for cleaning agent
End trimming unit with angled linear
guides and a high frequency motor with
0.35kW and a rotation speed of 12,000rpm. guarantees an excellent cutting quality.
Radius finishing. A choice between 0° and 10° cuts is possible, thereby increasing the individual
application range. 0.75 kW (1 HP) 12000 rpm HW saw blades Z 24 D-100x20x3.2 mm manually The independent copy shoe adjustment makes it possible for the edge overhang at the
front and rear to be adjusted separately. -
Free edge cut selection
Upper glue scraping unit
Lower glue scraping unit
$26,500.00 OBO
Contact Terrence@Centexautomation.net or call now 281-235-8138
Financing available with approved credit
Freight quote available by request
Installation, Set Up and Training-available
https://www.facebook.com/CentexAutomationService
www.centexautomation.net
