WOODWEB's Solid Wood Machining Forum

Carbide for which species posted by: Dave -- 6/14
3 responses -- 6/17

Used Weinig Molder Cutter Heads for P22N Molder posted by: molderguy -- 6/14
1 response -- 6/14

How Do You Approach Buying Equipment? ... vote in WOODWEB's latest Poll posted by: The Staff at WOODWEB -- 6/11
0 responses

Weinig P22N Molder & Weinig Rondamat 925 Grinder Videos posted by: Nimal R. Perera -- 6/6
1 response -- 6/7

Can cutter profiles from Woodmaster Tools run on Weinig P22N molder posted by: Nimal R. Perera -- 6/4
1 response -- 6/4

Compressor Smoking!! posted by: Dave Winters -- 5/30
10 responses -- 6/4

Griggio tenoner posted by: Evan Emmott -- 5/24
1 response -- 5/25

North State Planer Bed Adjustment posted by: karl -- 5/21
2 responses -- 5/24

Amana Insert Rabbeting Shaper Cutters posted by: Jesse Dunn -- 5/16
0 responses

dodds se 15 1966 dovetailer posted by: gary -- 5/7
1 response -- 5/14

CNC Routers: What Are Your Plans? ... vote in WOODWEB's latest Poll posted by: The Staff at WOODWEB -- 5/6
0 responses

Large Drill and countersink posted by: Larry -- 5/2
1 response -- 5/5

The best 3-phase rotary converters? posted by: BobB -- 4/30
11 responses -- 6/7

Table Wax posted by: Bill -- 4/29
7 responses -- 6/4

Tool selection for stile and rail posted by: Dayray -- 4/24
7 responses -- 5/22

SCM shaper spindle wrench... posted by: JeffD -- 4/24
7 responses -- 4/25

Tooling for Garapa posted by: Dave -- 4/18
3 responses -- 4/23

SCM T-160 shaper ???s posted by: JeffD -- 4/16
0 responses

Buss Planers... Good machine?? posted by: Jack -- 4/16
4 responses -- 4/21

Shaper setup for a 45 degree locking miter cutter. posted by: Kyle -- 4/11
4 responses -- 4/17

Finding the Right Planer posted by: Adam -- 4/9
4 responses -- 4/11

goosed-up williams/hussey posted by: keyhole -- 4/9
3 responses -- 4/15

Helical head killed my H.P. posted by: Gary -- 4/8
10 responses -- 4/27

Kundig Triplex 53 posted by: Matt Raymond -- 4/8
1 response -- 4/9

Is moulder knife steel sharp from the factory? posted by: Jeff -- 4/6
6 responses -- 4/20

Widebelt Ripples posted by: Mac -- 4/1
3 responses -- 4/2

Channel Siding Shaper Cutters posted by: MG -- 4/1
2 responses -- 4/6

VFD on Planer posted by: correy smith -- 3/30
3 responses -- 3/31

repairing a conveyor belt on a wide belt sander posted by: Tyson -- 3/25
2 responses -- 3/28

Inlay posted by: Bob -- 3/17
2 responses -- 4/1

Ripping plywood posted by: J. Ozburn -- 3/16
9 responses -- 3/29

Utis shaper experiences posted by: thinking -- 3/15
8 responses -- 4/19

Grizzly G0620 14" Sliding Table Saw posted by: RMi -- 3/12
1 response -- 3/12

Greenlee no 120 planer posted by: stephen clark -- 3/9
0 responses

Initial set up / installtion of weinig profimat moulder posted by: Michael Maringer -- 3/7
3 responses -- 3/16

crown molding posted by: Teddy House -- 3/2
1 response -- 3/4

Powermatic 15" Planer excess snipe posted by: John Eugster -- 3/2
7 responses -- 3/3

Wdebelts....paper or cloth? posted by: JeffD -- 2/27
14 responses -- 3/13

12" Union Jointer Model LCM-002 posted by: Jude Farmer -- 2/25
1 response -- 2/25

1hp induction motor inspection posted by: Jude Farmer -- 2/24
5 responses -- 2/25

Shaper or moulder? posted by: Dave Edgerton -- 2/22
7 responses -- 4/13

Spring joint on my slider posted by: Maderakb -- 2/17
5 responses -- 2/27

Used Weinig 925 posted by: df -- 2/7
4 responses -- 4/13

Ceiling-Mounted Stock Feeder. posted by: Mark Koons -- 1/27
7 responses -- 3/14

Very Narrow Rips posted by: Mark Koons -- 1/27
10 responses -- 2/15

Setting up a rip fence ON the sled of a Felder K700 posted by: Bill -- 1/24
2 responses -- 1/27

pin router purchase posted by: Mark Friedrich -- 1/22
2 responses -- 1/23

diehl straightline rip saws posted by: david joseph -- 1/21
10 responses -- 4/20

Lock jointery posted by: Andrew -- 1/20
4 responses -- 1/23

planer outfeed table posted by: ben boynton -- 1/14
3 responses -- 2/21

Gang rip saws posted by: Mark E. -- 1/13
1 response -- 4/14

dovetail machines posted by: eric -- 1/10
2 responses -- 1/10

omec dovetailer 750 posted by: justin -- 1/8
3 responses -- 1/14

Onsrud profiler wt21284 posted by: fred campbell -- 1/6
0 responses

Stroke Sander Setup posted by: Mark Balmer -- 12/22
3 responses -- 2/22

Dispoz-A-Blade versus Terminus/Tersa posted by: darvin -- 12/8
8 responses -- 12/14

HELP identify source of morticing bit posted by: Fritz Stoop -- 12/7
1 response -- 12/11

Carpet feed on Extrema Planer posted by: Vic -- 11/29
4 responses -- 12/3

Direct vs belt driven rip saw posted by: David -- 11/26
3 responses -- 4/14

Bridgewood planer posted by: Ryan -- 11/26
1 response -- 11/27

bandsaw belt slipping posted by: Dan -- 11/18
1 response -- 11/19

Wide belt Sanders posted by: Barry W. Larson -- 11/14
1 response -- 11/15

Bevel resawing posted by: shaner -- 11/6
3 responses -- 11/9

Moulding Stair Handrail posted by: Vic -- 11/1
3 responses -- 11/8

Manual single moving blade rip saw posted by: David -- 10/31
6 responses -- 1/15

Planing cost posted by: Dropout -- 10/30
6 responses -- 11/3

SCMI Sandya Widebelt posted by: Gary -- 10/28
2 responses -- 2/14

scmi t110 electrical posted by: Tyler -- 10/25
9 responses -- 10/31

new entrance door construction posted by: positive -- 10/24
4 responses -- 10/25

wide belt sander advice posted by: Dave Kumm -- 10/12
1 response -- 10/19

Striaght Line Ripping posted by: Todd Scholl -- 10/12
2 responses -- 10/15

shimmer cutter head posted by: Roger Wilson -- 10/8
1 response -- 12/8

Takekawa ripsaw parts posted by: Dan Raup -- 10/7
0 responses

Biesse Levia 330 posted by: Josh -- 10/6
0 responses

best possible moulder finish posted by: Blakeman Hardwood Mouldings, Inc. -- 10/5
8 responses -- 11/1

Cutting End Grain Tiles posted by: J -- 10/4
1 response -- 10/4

Spindle nut for Steel City Shaper? posted by: Tim Kulin -- 10/1
1 response -- 10/2

optimizing cut off saw posted by: gary -- 9/30
1 response -- 4/15

Soluble oil vs Water based coolant posted by: Jason -- 9/27
5 responses -- 10/6

How can I make shaker doors with a gap in the joints? posted by: Max Neu -- 9/24
3 responses -- 10/5

felder shaper posted by: Dave -- 9/21
5 responses -- 11/7

Stuck spindle on Casadei F115 shaper posted by: Craig Caughlan -- 9/20
5 responses -- 9/24

Griggio Gang Rip posted by: Rece Bly -- 9/20
0 responses

ISIS shaper posted by: David Sipos -- 9/15
1 response -- 9/18

Powermatic 2A Tenoner- Useful or Obsolete? posted by: Dan -- 9/14
12 responses -- 9/22

Cut-Off Saw - Choosing posted by: Craig Caughlan -- 9/13
2 responses -- 9/13

Issue with my new Byrd Shelix 12" cutterhead posted by: B.H. Davis -- 9/12
17 responses -- 10/28

SCM LOGIC 23 K posted by: Andy Hibberd -- 9/11
2 responses -- 9/15

Using slider saw to rip solid boards - awkward or not ? posted by: Procyon -- 9/4
6 responses -- 9/11

Flap sanding wheels posted by: shaner -- 9/2
1 response -- 11/27

Collets for Delta RU-50 Overarm Router posted by: Barry W. Larson -- 8/29
0 responses

Powermatic Cope Spindle posted by: Mr William Bruce Hepburn -- 8/29
3 responses -- 8/31

Sanding equipment - WB vs Brush posted by: Mr William Bruce Hepburn -- 8/28
1 response -- 8/28

Dust collection cloth bags - Wash in washing machine ? posted by: Procyon -- 8/27
3 responses -- 8/27

Whitney Shaper posted by: Mr William Bruce Hepburn -- 8/23
9 responses -- 9/12

Makita Precision Planer posted by: correy smith -- 8/17
1 response -- 9/5

Tiger CrossCut question posted by: Procyon -- 8/16
2 responses -- 8/17

Power feeder posted by: correy smith -- 8/15
12 responses -- 8/29

Viel Knife sharpener posted by: correy smith -- 8/15
1 response -- 6/13

3/8'' thick, arched false door rail posted by: Cody -- 8/9
5 responses -- 8/11

Rebate Cutter Elimination posted by: Cody -- 8/9
0 responses

Oil/grease for powerfeeder posted by: john07 -- 8/5
2 responses -- 8/12

Auburn End Matcher Pro posted by: James Villines -- 8/4
0 responses

Resaw issues posted by: Kyle -- 7/31
5 responses -- 8/31

Hollow joints on a glue line rip saw. posted by: Mark Koons -- 7/25
10 responses -- 8/24

shelix head for oliver jointer posted by: andy -- 7/17
16 responses -- 8/17

Old Wood Dulling Planner Knifes posted by: Tim -- 7/16
7 responses -- 10/13

Planing options on a moulder posted by: Joe -- 7/15
3 responses -- 9/13

Best way to make 3x3 shaker style corners posted by: Harold morantz -- 7/15
2 responses -- 8/23

C.R. Onsrud 3025 inverted router - need manual posted by: Procyon -- 7/14
3 responses -- 7/16

scale for profile knives posted by: doug mclaren -- 7/14
2 responses -- 7/26

Intermittent Wide belt Sander tracking problems posted by: Underdawg -- 7/13
2 responses -- 6/4

Maka RDB 6 rebuild posted by: Bill -- 7/12
5 responses -- 3/12

General International 13in benchtop planer w helical head posted by: Ken -- 7/9
0 responses

Curved interior profiles posted by: Bill -- 7/9
1 response -- 7/9

"Door Machines" posted by: Bill -- 7/8
4 responses -- 7/15

bevel particle board @ 7 degree angle posted by: George -- 7/8
0 responses

Very Long Rip Cuts posted by: Bill -- 7/7
7 responses -- 7/9

EUREKA! Supersurfacer posted by: Bill -- 7/6
5 responses -- 8/11

onsrud shoda pin router ro 117 h posted by: myron dubina -- 7/6
0 responses

240, 480 v Question posted by: Tom -- 7/1
8 responses -- 7/17

Rockwell/Invicta RJ-42 Manual posted by: Craig Caughlan -- 6/25
3 responses -- 6/25

Is there a programmable saw fence other than Tiger Stop ? posted by: Procyon -- 6/24
8 responses -- 11/21

Casadei or EMA.... what is the connection ? posted by: Procyon -- 6/22
3 responses -- 6/25

CKM Planer posted by: WaterDrop -- 6/17
1 response -- 6/18

Wood Identification posted by: Will Richards -- 6/16
2 responses -- 6/16

making 3mm veneer posted by: Johan Eskerod -- 6/14
2 responses -- 7/9

Recover and turn a rubber widebelt roller posted by: jeremy -- 6/7
3 responses -- 6/11

Chinese Altendorf saws....any advantage to them over... posted by: Procyon -- 6/5
1 response -- 5/28

sanding belts for widebelt posted by: Dave -- 6/4
4 responses -- 6/13

resawing teak posted by: Gary -- 6/1
4 responses -- 6/4

PAOLONI TP1300 SHAPER owner or users posted by: Jr Lee -- 6/1
4 responses -- 6/2

moulder head nuts posted by: doug mclaren -- 5/23
4 responses -- 5/25

Table saws with motorized blade height and tilt ? posted by: Procyon -- 5/19
4 responses -- 5/20

Altendorf F-45 slider saw question posted by: Procyon -- 5/19
2 responses -- 6/3

Paoloni TP1300 arbor removal posted by: Jr Lee -- 5/17
1 response -- 6/4

Replacing felt on widebelt platen posted by: Dave -- 5/16
6 responses -- 6/24

Machining Green Western Red Cedar posted by: Andrew -- 5/15
3 responses -- 5/18

Solid Cedar door production posted by: steve -- 5/14
1 response -- 5/17

Shaper Advice for Euro-style Outswing & Tilt-Turn Windows posted by: Craig Caughlan -- 5/14
7 responses -- 5/16

Not your typical jointer knife issue posted by: Tom -- 5/11
10 responses -- 5/27

Motor Capacitor Problems posted by: David R Sochar -- 5/10
7 responses -- 5/14

machining fir posted by: trapper -- 5/9
5 responses -- 5/15

Resaw Machines posted by: Shaner -- 5/8
1 response -- 5/11

rip sawing posted by: Rick Hopper -- 5/8
2 responses -- 5/9

cutting post formed counter tops posted by: chris -- 5/7
1 response -- 5/8

Molding/Trim from Southern Yellow Pine posted by: Vic -- 5/7
4 responses -- 7/7

New Delta Unisaw 3hp or 5hp posted by: Douglas Sparks -- 5/7
7 responses -- 5/9

Tersa head with -set screws- on gibs ?? posted by: Procyon -- 5/6
3 responses -- 5/7

Dewalt Switch posted by: Kerry Anderson -- 5/5
1 response -- 5/6

Slot Cutting-grooving solid Ash posted by: Dave Eilers -- 5/5
4 responses -- 5/7

Tersa vs Terminus planer heads ? posted by: Procyon -- 5/3
4 responses -- 5/4

Which phase converter posted by: John Sincerbeaux -- 5/1
8 responses -- 6/28

laguna tools posted by: Dave -- 4/27
8 responses -- 4/29

wiring a Maggi Steff Power feed for 230v posted by: Isaac -- 4/27
7 responses -- 5/11

EDM Moulding Knife Maker posted by: Wayne Smith -- 4/26
1 response -- 4/30

Profile Sanders posted by: Jeff -- 4/24
1 response -- 4/25

custom grinding shaper knives posted by: Jeremy -- 4/23
11 responses -- 1/9

Moulder Question-Take out last table shim? posted by: Joe -- 4/23
6 responses -- 4/26

embossing wheels posted by: Steve -- 4/20
2 responses -- 11/21

SCMI S520 planer...was the "E" model discontinued ? posted by: Procyon -- 4/15
3 responses -- 4/17

Spiral vs helical (carbide insert) cutterheads posted by: Procyon -- 4/14
3 responses -- 4/17

Rotating or replacing helical carbide inserts- How long does it take ? posted by: Procyon -- 4/13
16 responses -- 4/25

Recommendations for sources of helical head carbide inserts ? posted by: Procyon -- 4/12
9 responses -- 4/20

Power saving effect of an inverter on a resaw. posted by: thinking -- 4/12
14 responses -- 5/4

SCM S630 ET or ES planer....got one ? knives question.. posted by: Procyon -- 4/11
18 responses -- 4/14

Tongue & Groove Question posted by: Sean -- 4/9
2 responses -- 4/11

Bandsaw feeder posted by: Correy -- 4/3
2 responses -- 4/12

4 Head Moulder Problem posted by: Jim Kelly -- 3/28
7 responses -- 4/15

PM 160 Infeed/Knife Questions posted by: Tom -- 3/27
3 responses -- 3/28

sanding gouges posted by: berdman -- 3/26
2 responses -- 4/16

Cont' Arched Molding Saga... posted by: Vic -- 3/21
7 responses -- 3/24

Help with small wide belt sander? posted by: John Sincerbeaux -- 3/19
6 responses -- 3/26

International shipping of custom moulding knives posted by: Adam -- 3/15
2 responses -- 4/15

Beach drum sander tune-up posted by: Jon -- 3/12
1 response -- 3/13

powermatic planer head change. . . posted by: johnthegood1 -- 3/10
5 responses -- 3/20

Woodmaster posted by: Chris Payne -- 3/1
2 responses -- 3/21

Retooling posted by: Adam -- 2/25
3 responses -- 3/1

Best way to joint sides on random width lumber, S4S posted by: Kelvin Potter -- 2/24
2 responses -- 2/27

Running Original Surface Reclaimed Flooring posted by: Joe -- 2/24
1 response -- 2/24

Looking for input on straight knife planers with grinders posted by: Kelvin Potter -- 2/21
12 responses -- 3/3

leuco superprofilers posted by: kirk meyers -- 2/20
0 responses

Byrdy Shelix head problems, breaking teeth, Is this normal? posted by: Kelvin Potter -- 2/18
18 responses -- 6/1

Copy Lathe Tooling posted by: Lou Tobia -- 2/16
0 responses

extrema planners posted by: robert godsoe -- 2/14
4 responses -- 6/5

Dial indicator destruction posted by: Joel -- 2/10
1 response -- 2/12

SCMI Compact XL -P Molder posted by: Tillson -- 2/8
2 responses -- 2/14

Planer infeed roller marks: minimum depth of cut? posted by: Mike Schuler -- 2/7
3 responses -- 2/9

Arched Molding- 2 Questions posted by: Vic -- 2/2
9 responses -- 2/4

Powermatic #10 Mortiser trouble with 3/4" posted by: Paul Czamanske -- 1/29
0 responses

OK, now Which Shaper? posted by: John MacDougall -- 1/29
1 response -- 1/30

Using shaper as a moulder posted by: John MacDougall -- 1/26
9 responses -- 1/30

Top cote Alternative? posted by: Jake -- 1/24
8 responses -- 2/20

UHMW skin on jointer/ planer bed? posted by: scott -- 1/23
17 responses -- 1/31

will a PC 7518 cut 1/2" material with 1/2" bit in one pass? posted by: mark Friedrich -- 1/16
14 responses -- 1/20

greased bearings or oil mist? posted by: Jim Baldwin -- 1/13
5 responses -- 1/17

Mini-max 12" jointer adjustment posted by: Alex Hendrick -- 1/12
2 responses -- 2/19

IMC RP-12 Straight line rip posted by: Cory Hill -- 1/10
4 responses -- 1/11

Wood Planing posted by: Prateek Chawla -- 1/10
7 responses -- 1/18

Planer Molder posted by: Mike Ross -- 1/9
1 response -- 1/11