|
The simple jig below works great for a few doors. Screw it to a bench, glue up the door and lay it face down in the jig. Use two quick clamps to pull the joints snug, then use a block that spans both stiles and a pipe clamp to pull the door square into the jig. Pin the corners, remove the door from the jig, and clamp with two clamps.
The item shown below was excerpted from a March 2007 WOODWEB Knowledge Base article Cabinet Door Clamping Options. Readers are reminded to evaluate the significance and the limitations of the information provided below, and consider the responsibility they assume when applying the information for their own use.
(No images available for this Shopbuilt Equipment listing.)
|
