WOODWEB - the leading resource for professional woodworkers


 Home » Member Profiles » David R Sochar
 
Below is the publicly available information for this member:

(Click for larger image)
Name:David R Sochar
Categories: Architectural Millwork - Custom Millwork
Architectural Millwork - Doors & Windows
Architectural Millwork - General
Architectural Millwork - Lathe Turning
Architectural Millwork - Millwork Restoration
Architectural Millwork - Stairs and Balustrades
Cabinets - Custom Cabinets
Cabinets - Residential Cabinets
Furniture - Custom Furniture
Furniture - General
Furniture - Furniture Reproductions
Veneer and Marquetry - General

Project Gallery Listings: (6)

Forum threads this member is participating in:
Adhesives Forum
  Re: 100% waterproof glue for production   04/16
  Re: 100% waterproof glue for production   04/16
  Re: Laminated Island top   05/04
  Re: Laminated Island top   05/04
  Re: contact cement and 20 mil veneer   07/17
  Re: contact cement and 20 mil veneer   07/19
  Re: contact adhesive for thick veneer   12/11
  Re: epoxy vs glue   12/27
  Re: epoxy vs glue   12/28
  Re: Removing adhesive stain from wood door   01/26
  Re: interior use of ipe for gluing   02/21
  Re: exterior redwood door   02/27
  Re: exterior redwood door   03/04
  Re: epoxy glue and spalded Maple   03/19
  Re: home made glue lam   03/30
  Re: Gorilla glue, just curious   05/01
  Re: Gorilla glue, just curious   05/20
  Re: Gorilla glue, just curious   05/21
  Re: Glueing exterior cedar shutters   05/30
  Re: What glue to use for laminated utensils   10/05
  Re: Laminating IPE   02/19
  Re: Thermally treated lumber   09/12
  Re: Titebond 1 vs 2 vs 3   09/25
  Re: Titebond 1 vs 2 vs 3   10/19
  Re: Titebond 1 vs 2 vs 3   11/12
  Re: Cleaning Teak Holes For Glue up   09/29
  Re: The best glues for exterior door panels that withstands heat   12/15
  Re: HELP....I am trying glue cedar to metal outside   12/29
  Re: bonding 1/4 inch veneers to door core   02/06
  Re: Cracking on 6" walnut post glue-ups   03/12
  Re: Delamination in red oak newels   03/25
  Re: Delamination in red oak newels   03/25
  Re: Walnut cupping after glue up.   05/11
  Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass   07/10
  Re: Hickory not staying glued   01/05
  Re: Hickory not staying glued   01/07
  Re: Plane Off TiteBond III?   06/06
  Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood   10/07
  Re: best adhesive   11/21
  Re: best adhesive   11/22
  Re: best adhesive   11/22
  Re: Titebond 2 is NOT water resistant as claimed   01/19
  Re: masking tape residues on veneer and marketry issues   02/09
  Re: masking tape residues on veneer and marketry issues   02/09
  Re: Large area glue up   07/26
  Re: DE Lamination headache   11/16
  Re: Epoxy problems   11/22
  Re: Table top strip inlay adhesive   01/19
  Re: Table top strip inlay adhesive   02/02
  Re: I know I'm crazy but....   03/02
  Re: What glue for LongLeaf Heart Pine?   03/11
  Re: What glue for LongLeaf Heart Pine?   03/14
  Re: microwaveable safe glue   03/13
  Re: glue/ cracking   10/31
  Re: National Casein 750   01/11
  Re: most water-resistant laminate glue method?   04/08
  Re: Automatic Door Bottoms   07/03
  Re: Automatic Door Bottoms   07/09
  Re: adhering veneer to timber flex   07/19
  Re: adhering veneer to timber flex   07/20
  Re: Best Adhesive for End Grain Butcher Block   07/19
  Re: Best adhesive for thin plastic veneer to wood picture frames   09/30
Architectural Woodworking Forum
  Re: Usability of 12/4 Quarter sawn White Oak   01/20
  Re: Usability of 12/4 Quarter sawn White Oak   01/21
  Re: Wide Exterior Raised Panel   02/04
  Re: Glueing white oak treads to metal   02/19
  Re: Glueing white oak treads to metal   02/22
  Re: Working with Accoya   02/25
  Re: In search of 14'10" rift white oak in 5/4   02/25
  Re: IPB White Melamine warping after cut?   03/03
  Re: MDF laminated doors   03/06
  Re: Wainscoting Panels   03/15
  Re: Restraining wood movement   03/15
  Re: Restraining wood movement   03/18
  Re: Entry Door   04/09
  Re: stained glass in exterior door   04/16
  Re: rail to newel cap joint   04/17
  Re: storing wood outside in a shipping container   04/20
  Re: storing wood outside in a shipping container   04/21
  Re: Jamb legs   04/25
  Re: Jamb legs   04/25
  Re: Backer Board for Church Parts   04/28
  Re: Curved back bench seat   05/01
  Re: Epoxy barrier coat on exterior doors   05/12
  Re: Were to find wood planks for door   05/10
  Re: Exterior bench of stainless steel and wood   05/13
  Re: Exterior bench of stainless steel and wood   05/15
  Re: Solid Wood Plank Entry Door   05/19
  Re: Solid Wood Plank Entry Door   05/20
  Re: Solid Wood Plank Entry Door   05/21
  Re: Does anyone know how to make this joint?   05/21
  Re: Fir AB Clear plywood   05/29
  Re: Fir AB Clear plywood   05/29
  Re: cypress   06/02
  Re: Biscuit expansion in MDF, no water, no glue   06/05
  Re: door construction   06/11
  Re: Roll up storefront garage door   06/16
  Engineered Stiles Veneer Failure   07/18
  Re: Engineered Stiles Veneer Failure   07/21
  Re: Engineered Stiles Veneer Failure   07/21
  Re: Entering the entry door Business   07/24
  Re: Entering the entry door Business   07/25
  Re: Entering the entry door Business   07/26
  Re: Entering the entry door Business   07/28
  Re: Where do you learn about wood railing fabrication etc?   07/28
  Re: Curved glazing stops   07/31
  Re: gluing turning blocks for pillar bases   08/10
  Re: gluing turning blocks for pillar bases   08/11
  Re: gluing turning blocks for pillar bases   08/12
  Re: How to be successful as an estimator?   08/15
  Re: entry door builders - how would you handle?   08/22
  Re: entry door builders - how would you handle?   08/22
  Re: entry door builders - how would you handle?   08/23
  Re: Entry doors glass   08/26
  Re: Wood identification   08/28
  Re: warped slab door   09/11
  Re: warped slab door   09/12
  Re: warped slab door   09/18
  Re: Holding pre-hung man doors closed   09/17
  Re: Keeping a clean shop   10/07
  Re: Keeping a clean shop   10/08
  Re: curved stair handail questions for proffessionals   10/10
  Re: curved stair handail questions for proffessionals   10/13
  Re: curved stair handail questions for proffessionals   10/14
  Re: curved stair handail questions for professionals   10/29
  Re: curved stair handail questions for professionals   10/30
  Re: Speed Up Glueing on Exterior Doors   10/15
  Re: Speed Up Glueing on Exterior Doors   10/15
  Re: Eyebrow head Pivot   10/19
  Re: Eyebrow head Pivot   10/20
  Re: Caulking Panels in Entry Doors   10/24
  Re: Caulking Panels in Entry Doors   10/24
  Re: Bubinga finishing techniques   10/31
  Re: A friend wants me to build this   11/04
  Re: LSL Lamination Failure   11/21
  Re: LSL Lamination Failure   11/25
  Re: LSL Lamination Failure   11/25
  Re: Profiled Trestle Base   11/24
  Re: Profiled Trestle Base   12/14
  Variety of Joints   11/30
  Re: Variety of Joints   12/01
  Re: Variety of Joints   12/01
  Re: Variety of Joints   12/02
  Re: Variety of Joints   12/04
  Re: Variety of Joints   12/04
  Re: Variety of Joints   12/05
  Re: Variety of Joints   12/05
  Re: Variety of Joints   12/06
  Re: Variety of Joints   12/07
  Re: Variety of Joints   12/08
  Re: Weather stripping   12/04
  Re: Haunching tenons   12/12
  Re: Large French doors   12/16
  Re: Large French doors   12/17
  Re: Large French doors   12/17
  Re: Walnut shavings   12/19
  Re: Walnut shavings   12/20
  Re: Walnut shavings   12/23
  Re: End Grain Top Cupping   12/31
  Re: back-up data about hardwood warping   01/09
  Re: How would you go about building this?   01/19
  Re: Cabinet Door Profile   01/23
  Re: Cabinet Door Profile   01/28
  Re: Ladder Core Exterior Door   02/03
  How To Make Large Accurate Measurements?   02/02
  Re: How To Make Large Accurate Measurements?   02/19
  Re: Need hardware for pivoting window….   02/09
  Re: Interior Door Panels   02/11
  Re: ladder cores/stave cores   02/20
  Re: Shutter Hinges   03/10
  Re: will it work (repair question)?   03/10
  Re: will it work (repair question)?   03/14
  Re: Torrification   04/04
  Re: Insulated Glass spacer blocks   03/28
  Re: Domino df 700   03/31
  Re: Domino df 700   04/16
  Re: Domino df 700   04/18
  Re: Old Handrail Joining Hardware   04/02
  Re: Has anyone used Red Grandis lumber?   04/07
  Re: Sanding double hung sashes   04/20
  Re: reception desk -solid walnut details   04/23
  Re: reception desk -solid walnut details   04/23
  Re: Exterior door materials....   05/01
  Re: Exterior door materials....   05/04
  Re: Successful shop made tenoning/coping sled   05/01
  Re: Carved front door   05/20
  Re: Large Garage Doors   05/18
  Re: Shop square foot to person ratio   05/18
  Re: Plank door construction   05/21
  Re: Plank door construction   05/25
  Re: Rules of Thumb for Max Exterior Door Veneer Thickness?   05/28
  Re: sawdust and resin furniture   06/08
  Re: Wenge movement   06/23
  Re: Legislature Gavel   06/16
  Re: Legislature Gavel   06/17
  Re: elliptical templates   06/21
  Re: Setting up a solid door making factory   07/10
  Re: Setting up a solid door making factory   07/10
  Re: Belt Sanding   07/14
  Re: Coffered ceilings...   07/17
  Reinforced Miters   08/10
  Re: Reinforced Miters   08/10
  Re: Reinforced Miters   08/20
  Re: Warped material frustration?   09/02
  Re: Arched Top Louver Doors ?   09/05
  Re: Choosing a good exterior finish for new double glazed wooden windows   09/08
  Re: Choosing a good exterior finish for new double glazed wooden windows   09/08
  Re: Exterior wood doors   09/10
  Re: Exterior wood doors   09/11
  Re: Exterior wood doors   09/11
  Re: Exterior wood doors   09/17
  Re: Exterior wood doors   09/17
  Re: Exterior wood doors   09/18
  Re: quartersawn red oak treads and risers over old stairs   09/24
  Re: quartersawn red oak treads and risers over old stairs   09/29
  Re: Solid walnut countertop   10/20
  Re: Solid walnut countertop   10/21
  Re: Solid walnut countertop   10/21
  Re: Sliding doors with swing doors   11/04
  Re: handrail fittings WITHOUT CNC   11/12
  Re: Exterior Door Weathering   12/04
  Re: hidden door on soss hinges   12/09
  Re: 2 Ply Laminated Stiles   12/17
  Re: Removing Glass   12/22
  Re: would you warranty this entrance door?   12/20
  Re: wood quality   01/01
  Re: wood quality   01/01
  Re: Light weight panels for laminate   01/01
  Re: Wall cladding material   01/05
  Re: bending particle board   01/15
  Re: Wood or MDF?   01/16
  Re: laminating mdf for strength   01/26
  Re: IGU with Laminated Glass   01/29
  Re: horizontal plank doors   02/01
  Re: Vacuum Psi vs. Glue Specs.   02/02
  Re: Vacuum Psi vs. Glue Specs.   02/05
  Re: Vacuum Psi vs. Glue Specs.   02/06
  Re: Vacuum Psi vs. Glue Specs.   02/06
  Re: Vacuum Psi vs. Glue Specs.   02/07
  Re: Raised panel wainscot   02/10
  Re: Raised panel wainscot   02/10
  Re: How would you make these doors?   02/17
  Re: Torsion Box Doors   02/26
  Re: Side lite with threshold, how to build?   03/08
  Re: Does wood thickness matter?   03/17
  Re: HELP. Did I price this out correctly?   03/24
  Re: Designed to fail   03/28
  Re: Thick Veneer Bar Top   03/30
  Re: Thick Veneer Bar Top   03/30
  Re: Thick Veneer Bar Top   03/31
  Re: What is the best way to join wood for hollow posts?   04/01
  Re: Reclaimed Slab Doors   04/07
  Re: IGU Thickness   04/29
  Re: Making internal softwood doors   04/29
  Re: Moulder investment   05/14
  Re: Closet door construction   06/03
  Re: Wood choice for exterior column base?   06/09
  Re: Wood choice for exterior column base?   06/15
  Re: Wood choice for exterior column base?   06/16
  Re: Laminated door parts   06/08
  Re: Looking for a professional Wood Carver   06/08
  Re: Vac pressed panels warping?!?!   06/09
  Re: Cleaning glue off stave door cores   06/20
  Exterior Door Panel Longevity   06/21
  Re: Exterior Door Panel Longevity   06/22
  Re: Exterior Door Panel Longevity   06/23
  Re: Rotting cedar   06/30
  Re: open frameless cabinets   07/19
  Re: Divided Light Sashes   08/18
  Re: Entry Door   08/26
  Re: Entry Door   08/29
  Re: Doors from old barnwood   09/05
  Re: Flush Entry Door   09/13
  Re: 8/4 rift white oak   09/21
  Re: Wood as a new design material? ha   09/22
  How Can This Be?   09/23
  Re: How Can This Be?   09/23
  Re: How Can This Be?   09/26
  Re: How Can This Be?   09/28
  Re: How Can This Be?   09/30
  Re: How Can This Be?   10/02
  Re: Source for large slab wood   09/29
  Re: Door lock mortisers   10/04
  Re: Door lock mortisers   10/04
  Re: Sanders at the bench   10/06
  Re: 12 foot Teak veneer   10/26
  Re: doors in 1923   11/01
  Re: Need advice on large panel raise   11/04
  Re: Three Ply Stiles   12/08
  Re: Three Ply Stiles   12/09
  Re: Three Ply Stiles   12/09
  Re: Three Ply Stiles   12/12
  Re: Cross laminated timber   12/27
  Re: treads warping   12/30
  Re: Why didn't this work. Elliptical routing   02/10
  Pivot Door Latching?   02/16
  Re: Pivot Door Latching?   02/17
  Re: Pivot Door Latching?   02/23
  Re: Pivot Door Latching?   02/25
  Re: angled treads in straight stair   03/03
  Re: angled treads in straight stair   03/06
  Re: MC Changes & Wood Movement Due to High Humitity   03/04
  Re: MC Changes & Wood Movement Due to High Humitity   03/07
  Re: 180° Curved Staircase   03/27
  Re: 180° Curved Staircase   03/27
  Re: 180° Curved Staircase   03/27
  Re: 180° Curved Staircase   04/03
  Re: 180° Curved Staircase   06/09
  Re: Gap at bottom of double door   04/06
  Re: Mirrored passage doors....   04/13
  Re: Mirrored passage doors....   04/16
  Re: Mirrored passage doors....   04/18
  Re: Saw Blade Sharpening/Washing   04/13
  Compound Curve Crown Molding   04/21
  Re: Compound Curve Crown Molding   04/24
  Re: Compound Curve Crown Molding   04/24
  Re: Compound Curve Crown Molding   04/27
  Re: Compound Curve Crown Molding   04/27
  Re: Compound Curve Crown Molding   05/02
  Re: Compound Curve Crown Molding   05/06
  Portable Mortiser   05/18
  Re: Portable Mortiser   05/22
  Re: Quality gate hinges   06/07
  Re: Need Long Pattern Bit   06/16
  Re: Sliding Door Track for a Radiused Door   06/29
  Re: Sliding Door Track for a Radiused Door   06/29
  Re: Sliding Door Track for a Radiused Door   06/30
  Re: Tangent Handrail   07/05
  Re: How much did I under bid   07/05
  Re: True Divided 60 Lite Sash   07/18
  Re: True Divided 60 Lite Sash   07/19
  Re: True Divided 60 Lite Sash   07/19
  Re: Reverse Table Saw   07/21
  Re: Reverse Table Saw   07/27
  Re: Reverse Table Saw   07/28
  Re: Exterior Wood Door Questions   07/24
  Re: Exterior Wood Door Questions   07/25
  Re: Exterior Wood Door Questions   07/27
  Re: Exterior Wood Door Questions   07/31
  Re: Exterior Wood Door Questions   08/11
  Re: 1 3/8" MDO panels   08/03
  Definition of an Ellipse?   08/08
  Re: Definition of an Ellipse?   08/09
  Re: Definition of an Ellipse?   08/09
  Re: Definition of an Ellipse?   08/10
  Re: Definition of an Ellipse?   08/14
  Re: Definition of an Ellipse?   08/15
  Re: Definition of an Ellipse?   08/17
  Re: Controlling snipe on a W&H   08/11
  Re: Insulated glass, supplier question   08/28
  How to Handle A Woody?   08/29
  Re: How to Handle A Woody?   08/30
  Re: How to Handle A Woody?   09/01
  Re: How to Handle A Woody?   09/06
  Re: How to Handle A Woody?   09/11
  Re: Expansion of quartered sapele   09/20
  How Is This Door Made?   10/02
  Re: How Is This Door Made?   10/03
  Re: How Is This Door Made?   10/05
  Re: How Is This Door Made?   10/05
  Re: How Is This Door Made?   10/06
  Re: How Is This Door Made?   10/11
  Re: How Is This Door Made?   10/11
  Re: How Is This Door Made?   10/12
  Re: How Is This Door Made?   10/17
  Re: How Is This Door Made?   11/27
  Re: Filling cracks on exterior door   10/03
  Re: Vertical Plank Slab Front Door   10/20
  Re: Exterior Outswing Sill   10/27
  Re: Band/Resaw Recommendations   11/29
  Re: APPLYING SOLD WOOD EDGE TO P-LAM TOPS   12/07
  Re: Pricing Jobs On A Moulder   12/19
  Re: Pricing Jobs On A Moulder   12/20
  Re: Pricing Jobs On A Moulder   12/21
  Re: Outboard Fence   12/28
  Re: Door panels cracked   12/31
  Re: Door panels cracked   01/01
  Re: Door panels cracked   01/01
  Re: Door panels cracked   01/02
  Re: Door panels cracked   01/03
  Re: Door panels cracked   01/05
  Re: Exterior Outswing Doors   01/08
  Re: winter cracks and what do about them   01/10
  Re: Split along the glue joint - why?   01/10
  Re: Split along the glue joint - why?   01/11
  Re: Split along the glue joint - why?   01/12
  Re: Split along the glue joint - why?   01/23
  Re: Split along the glue joint - why?   01/23
  Re: Split along the glue joint - why?   01/24
  Re: Split along the glue joint - why?   01/25
  Re: Split along the glue joint - why?   01/26
  Re: Tectus Hinges   01/17
  Re: Stepped Down Panels: Best Method?   02/05
  Re: Stepped Down Panels: Best Method?   02/05
  Re: Front door   02/19
  Re: Front door   02/19
  Re: Stave core vs. 10/4   02/26
  Re: Stave core vs. 10/4   02/26
  Re: Insulated Ladder Core Entry Doors for Workshop   02/23
  Re: insulated carriage doors   02/26
  Re: insulated carriage doors   02/26
  Re: insulated carriage doors   02/26
  Re: Rail & stile size for large exterior doors   02/28
  Re: Rail & stile size for large exterior doors   03/01
  Re: Glazing Tapes   03/09
  Re: TDL Door assembly   03/07
  Re: Splits developing   03/15
  Woven Wood Doors, A Drama In Five Parts   03/31
  Re: Woven Wood Doors, A Drama In Five Parts   04/02
  Woven Wood Doors, Part II Failure!   04/02
  Woven Wood Doors, Part III Recovery   04/05
  Re: Woven Wood Doors, Part III Recovery   04/05
  Woven Wood Doors, Part IV Parts Is Parts   04/10
  Re: Need help identifying this wood   04/12
  Re: need help fixing a twisted door   04/13
  Woven Wood Doors, Part V Success!   04/13
  Re: Woven Wood Doors, Part V Success!   04/17
  Re: Woven Wood Doors, Part V Success!   06/11
  Re: what is this saw?   04/20
  Re: Bessey Revo vs Latest version KRE 3.5xx   05/02
  Re: Wood Treated with Acetylation   05/15
  Re: Press for laminations   05/21
  Re: Press for laminations   05/22
  Re: House Door Repair   05/31
  Re: What type of Pine   05/31
  Re: Edge gluing plywood   06/06
  Re: Panel movement?????   07/03
  Re: Automatic sweep on dutch door?   07/09
  Re: Automatic sweep on dutch door?   07/09
  Re: Garage doors??   07/19
  Re: Garage doors??   07/19
  Re: Digital Readout   07/27
  Finally! Woven Wood Doors In Place   08/14
  Re: Finally! Woven Wood Doors In Place   08/16
  Re: Finally! Woven Wood Doors In Place   08/20
  Re: New to reclaiming   08/16
  Re: Please help a newbie by recommending the correct router bit   08/16
  Re: Really tall door rules   09/07
  Re: Really tall door rules   09/10
  Re: multi-point entry door hardware with smart technology   09/14
  Re: Insert rabbeting cutter   09/27
  Re: Insert rabbeting cutter   10/03
  Exterior Glue Failure - Part One!   10/03
  Re: Exterior Glue Failure - Part One!   10/30
  Re: Exterior Glue Failure - Part One!   10/31
  Re: Exterior Glue Failure - Part One!   11/01
  Re: Entry door construction   10/07
  Re: LVL & Garage Door Build??   10/22
  Re: LVL & Garage Door Build??   10/26
  Re: LVL & Garage Door Build??   10/29
  Re: Gluing up radius jambs   10/23
  Re: Wood Columns: species   11/16
  Re: Pivot Door Jamb   11/26
  Re: Applying wide mullions in exterior door   12/07
  Re: Euro-joint ?   12/21
  Re: Exterior wood door construction.   12/19
  Re: Vertical Multi Point Hardware   12/21
  Re: Cement board mantle   12/30
  Re: Cement board mantle   12/31
  Re: Cement board mantle   01/02
  Re: Cement board mantle   01/02
  Re: Cement board mantle   01/05
  Re: Interior shaker doors   01/10
  Re: Floating Bartop Construction   01/11
  Re: Best quality door butt hinges?   01/11
  Re: Box Beam Construction   01/24
  Re: Box Beam Construction   01/24
  Re: Box Beam Construction   01/25
  Re: Box Beam Construction   01/31
  Re: 1-3/4" Lock Miters   01/29
  Re: 1-3/4" Lock Miters   02/05
  Re: 1-3/4" Lock Miters   02/05
  Re: Barn-type Door Construction   02/07
  Re: Barn-type Door Construction   02/07
  Re: Interior Barn Style Door   02/11
  Re: Mixed Hardwood Panel   02/12
  Re: Correct type of glue for table top   04/02
  Re: Exterior Jamb& Threshold Detail?   04/20
  Re: Exterior Jamb& Threshold Detail?   04/22
  Re: Exterior Jamb& Threshold Detail?   04/24
  Re: Exterior Jamb& Threshold Detail?   04/29
  Re: Need Help With T&G Pattern Gate   04/29
  Re: Need Help With T&G Pattern Gate   05/03
  Re: Impact door   05/03
  Re: Glue choice   05/22
  Re: Front door   06/03
  Re: Front door   06/06
  Re: Wooden sink   06/18
  Re: Wooden sink   07/03
  Re: Entry Door Thresholds   07/18
  Re: Entry Door Thresholds   07/18
  Re: Stiles construction interior shaker doors   07/20
  Re: Stiles construction interior shaker doors   07/22
  Re: Stiles construction interior shaker doors   07/23
  Re: Stiles construction interior shaker doors   07/24
  Re: Stiles construction interior shaker doors   08/16
  Re: fabricating 'standard' handrail fittings   08/02
  Re: fabricating 'standard' handrail fittings   08/05
  Re: fabricating 'standard' handrail fittings   08/06
  Re: fabricating 'standard' handrail fittings   08/08
  Louver Jig   08/16
  Re: Louver Jig   08/17
  Re: Louver Jig   08/21
  Re: Louver Jig   08/22
  Re: Louver Jig   08/23
  Re: Louver Jig   09/09
  Re: Louver Jig   09/10
  Re: Louver Jig   09/13
  Re: Louver Jig   09/16
  Re: Louver Jig   09/17
  Re: South Facing Front Door   09/02
  Re: South Facing Front Door   09/06
  Re: Glazing Question   09/16
  Re: Glazing Question   09/20
  Re: Slash cut abrasive rolls   09/24
  Re: Which is the best woodworking software program?   10/16
  Re: Wood ID   10/29
Business Forum
  Re: Branding your product   02/10
  Re: Employees don't want responsibility   02/26
  Re: How to expand?   03/03
  Re: Charge tax or not?   03/07
  Re: Interesting conversation with employee   03/08
  Re: Interesting conversation with employee   03/09
  Re: Blue Ocean (sky) strategies   03/12
  Re: How did you find cheap commercial space???   03/13
  Re: How did you find cheap commercial space???   03/20
  Re: Custom Furniture Makers-how do you negotiate with clients?   03/15
  Re: Custom Furniture Makers-how do you negotiate with clients?   03/19
  Re: Carpenter's Apprentice unable to physically do job (pregnant!)   04/16
  Re: Carpenter's Apprentice unable to physically do job (pregnant!)   04/16
  Re: Carpenter's Apprentice unable to physically do job (pregnant!)   04/20
  Re: What does a foreman do?   04/22
  Re: What does a foreman do?   04/26
  Re: Legitimate questions from an interviewee?   05/01
  Re: Outrageous Handling Fees   05/09
  Re: Outrageous Handling Fees   05/13
  Re: best philosophy for managing volume   05/09
  Re: best philosophy for managing volume   05/10
  Re: IWF2014   06/04
  Re: IWF2014   06/05
  Re: IWF show   06/23
  Re: How would you handle this customer?   06/20
  Re: How would you handle this customer?   06/23
  Re: How would you handle this customer?   06/23
  Re: IWF on the fly?   06/27
  Re: IWF on the fly?   06/27
  Re: WOODWEB AND ME   07/28
  Re: Overwhelmed   07/31
  Re: Overwhelmed   08/01
  Re: Law suit   08/05
  Re: Biomass Heating   08/05
  Re: Biomass Heating   08/05
  Re: illegal operation   08/12
  Re: Am I being reasonable????   08/18
  Re: Am I being reasonable????   08/20
  Re: Am I being reasonable????   08/22
  Re: Access to the facility   08/29
  Re: Missing a deadline in a big way, how would you handle this?   09/01
  Re: Missing a deadline in a big way, how would you handle this?   09/03
  Re: Employee cell calls in bathroom   09/15
  Re: Economy is clearly better   09/18
  Re: Screening employees for ebola   10/01
  Re: Screening employees for ebola   10/07
  Re: Screening employees for ebola   10/08
  Re: when is enough enough   10/03
  Re: Would you do it?   11/14
  Re: time wasted at looking at work   11/13
  Re: Pretty Good Review   11/29
  Re: Pretty Good Review   12/02
  Re: Moving on up?   12/20
  Re: Leadership for dummies?   12/29
  Re: New York Times Business Section   01/01
  Re: closing shop and working for competition   01/26
  Filing W-2 & W-3   01/30
  Re: Filing W-2 & W-3   02/11
  Re: Selling Your Work   02/02
  Re: Insanely Messy Worker, wants to be Foreman, Advise?!?   02/04
  Re: Insanely Messy Worker, wants to be Foreman, Advise?!?   02/06
  Re: Insanely Messy Worker, wants to be Foreman, Advise?!?   02/07
  Re: Business owners, managers, fellow woodworkers...What am I worth?   02/13
  Re: Business owners, managers, fellow woodworkers...What am I worth?   02/14
  Re: Here's a fun question... do you scream at your employees?   02/13
  Re: 400w to t5 light replacement   02/16
  Re: Close the doors, move on?   02/20
  Re: Close the doors, move on?   02/28
  Re: Why did you start a business in woodworking?   03/07
  Re: AWFS Las Vegas 2015   03/11
  Re: AWFS Las Vegas 2015   03/16
  Re: Clumsy beginnings, clumsy growth spurts.   03/17
  Re: My dilemma....   03/21
  Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.   03/25
  Re: Quote   04/01
  Re: Quote   04/01
  Re: How calculated are you on capital improvements?   04/09
  Re: Three S (?) programs   04/13
  Re: Three S (?) programs   04/13
  Re: shop layout software   04/15
  Re: Working for the Company Store   04/20
  Re: Working for the Company Store   04/20
  Re: Angel investors   04/21
  Re: Angel investors   04/24
  Re: What is your applicant-screening process?   04/30
  Re: What is your applicant-screening process?   05/02
  Re: Quickbooks Online Payroll?   05/18
  Re: Start up, no capital but full shop of machinery   05/16
  Re: Outsourcing the financials   05/21
  Re: Safe Rooms   05/28
  Re: Safe Rooms   05/28
  Re: Safe Rooms   05/29
  Re: Planning workload in a small shop   06/08
  Re: Internet marketing, prosumerism and paid bloggers.   06/11
  Re: Internet marketing, prosumerism and paid bloggers.   06/15
  Re: Labor Market/Finding Workers   06/17
  Re: Labor Market/Finding Workers   06/21
  Re: Everyone is an idiot, apparently?   06/23
  Re: Everyone is an idiot, apparently?   06/25
  Re: Cabinet Nomenclature Questions   06/30
  Re: Growing the business   07/01
  Re: Seeking business insurance   07/17
  Re: Seeking business insurance   07/17
  Re: Seeking business insurance   07/18
  Re: this is worth a listen   07/21
  Re: this is worth a listen   07/21
  Re: Millennials   07/30
  Re: Millennials   08/01
  Re: Myth of the E-Myth   08/03
  Re: dealing with an underqualified employee   08/07
  Re: What would you call a big gig?   08/15
  Re: What would you call a big gig?   08/17
  Re: Shop floor motivation   08/13
  Re: Passage door supplier   08/21
  Re: Is high end work dying?   08/26
  Re: Is high end work dying?   08/27
  Re: Is high end work dying?   08/28
  Re: Pay parity with other trades?   09/24
  Re: right person for foreman   10/03
  Re: Recovering from burnout?   10/09
  Re: Financing Machinery   10/13
  Re: We are the third bidder   10/27
  Re: Shop employees start time   10/28
  Re: Shop employees start time   10/30
  Re: Buying the Business   11/11
  Re: Buying the Business   11/11
  Re: Glue line quality   11/14
  Re: Glue line quality   11/21
  Re: Yearly gross dollar output per employee   11/15
  Re: Interior Designer Commision   11/19
  Re: Interior Designer Commision   11/20
  Re: considering a partnership   11/27
  Re: NFPA 664 Compliance   12/07
  Re: Shop statistics   12/18
  Re: 6 hour Work Day....Is it Possible in the US?   12/21
  Re: Tipping Delivery Drivers?   12/21
  Re: can't find the right help   12/27
  Re: can't find the right help   12/29
  Re: can't find the right help   12/30
  Re: Random Rant - Read if you got nothing better to do   01/03
  Re: Cabinetry as a percentage of the home price   01/08
  Re: Cabinetry as a percentage of the home price   01/08
  On Premisis Bookkeeping Software?   02/01
  Re: On Premisis Bookkeeping Software?   02/03
  Re: I was right all along. Woodworking shop owner= lack of education+ horri   02/06
  Re: I was right all along. Woodworking shop owner= lack of education+ horri   02/06
  Re: I was right all along. Woodworking shop owner= lack of education+ horri   02/07
  Re: I was right all along. Woodworking shop owner= lack of education+ horri   02/08
  Re: I was right all along. Woodworking shop owner= lack of education+ horri   02/08
  Re: Lean Story   02/07
  Re: Equipment needed for live edge slab furniture?   02/11
  Crossroads   02/16
  Re: garage shop guy... am I hated?   03/24
  Re: garage shop guy... am I hated?   03/24
  Re: garage shop guy... am I hated?   03/25
  Re: garage shop guy... am I hated?   03/28
  Re: Moulding pricing   04/02
  Re: Follow up and thoughts on the gender issue   04/10
  Re: Follow up and thoughts on the gender issue   04/11
  Re: Follow up and thoughts on the gender issue   04/11
  Re: deficiency problem   06/09
  Re: Wear your ear protection   06/20
  Re: Wear your ear protection   06/21
  Re: Cabinetmaking Opportunities in the future   07/12
  Re: Over Paid Employee?   07/11
  Re: Headphones on the shop floor   07/20
  Re: Headphones on the shop floor   07/21
  Re: Employee Side Work   08/18
  Re: Making a living band sawing letters   09/07
  Re: Making a living band sawing letters   09/08
  Re: How do you compete with smaller shops?   09/15
  Re: How do you compete with smaller shops?   09/15
  Re: Harbinger of things to come   10/06
  Re: Pro or DIY   10/19
  Re: An housing expert talking about home sales   11/22
  Re: An housing expert talking about home sales   11/23
  Re: Immigration Policy & Cabinet Shop prospects   11/28
  Re: Has anyone figured out a good/profitable use of scraps?   12/07
  Re: Biomass Furnace   12/23
  Re: I've had it with appliance specs!   01/12
  Re: I've had it with appliance specs!   01/13
  Re: Hatin   01/23
  Re: Hatin   01/23
  Re: Hatin   01/23
  Re: Hatin   01/24
  Re: Price matching competetor quotes   01/30
  Re: Don't look at this chart David, everyone else might find it interesting   02/13
  Re: Self MotivatingEmployees   02/14
  Re: Self MotivatingEmployees   02/15
  Re: Content of Woodweb Posts   02/20
  Re: changing demographics and consumer tastes   03/06
  Re: changing demographics and consumer tastes   03/06
  Re: changing demographics and consumer tastes   03/06
  Re: Used Machinery - 360   03/09
  Re: 20% tariff on Canadian Lumber   04/27
  Re: Marketing solid wood doors   05/05
  Re: WSJ: Labor Shortage in Construction   05/08
  Re: Emails upon emails   05/17
  Re: Lack of workers holds back Utah's economy   05/22
  Re: Presented without further comment   06/20
  Re: Presented without further comment   06/21
  Re: When performance starts to sour   07/06
  Re: Disruptive Economies   07/26
  Re: Just put them on sanding...   07/27
  Re: The Facts   07/31
  Re: Storage charges   08/15
  Re: this just in   08/18
  Re: this just in   08/18
  Re: this just in   08/18
  Re: Office to Shop employee ratio   08/25
  Re: Netflix   08/28
  Re: DACA & Shortage of Workers   09/06
  Re: DACA & Shortage of Workers   09/06
  Re: DACA & Shortage of Workers   09/07
  Re: DACA & Shortage of Workers   09/07
  Re: Insurance for small furniture maker operation   09/13
  Re: I read it so you don't have to   09/19
  Re: Lowering the cost of housing in America   10/03
  Re: Lowering the cost of housing in America   10/03
  Re: Medical Insurance   10/23
  Re: Payroll and workers compensation   10/08
  Re: Cabinetshop management question   10/11
  Re: Cabinetshop management question   10/11
  Re: Lean Grocery Stores   10/17
  Re: Hiring New Shop Employees   10/24
  Re: The Real Deal   11/09
  Re: How are you all handling telemarketers?   12/13
  Re: How are you all handling telemarketers?   12/14
  Re: How are you all handling telemarketers?   12/18
  What Do You Like To Hear on Your Sound Systems?   12/27
  Re: What Do You Like To Hear on Your Sound Systems?   12/28
  Re: Starting Time   12/29
  Re: Scaling High-end Residential Custom Shop   12/29
  Re: White Glove Shipping Companies   01/22
  Re: Can't satisfy customer   01/29
  Re: Finding people?   01/29
  Re: Private Label Manufacturing?   01/31
  Re: Profit Margin   03/13
  Re: Profit Margin   03/13
  Re: Profit Margin   03/14
  Re: Codifying Processes   03/15
  Re: Codifying Processes   03/15
  Re: Codifying Processes   03/15
  Re: Codifying Processes   03/16
  Re: Codifying Processes   03/16
  Re: Hiring: How to test applicants for strength   03/21
  Re: Still sawing   03/27
  Re: Drawer Box Laser Logo Rejection?   03/29
  Re: A new way to PHISH for a business sucker?   03/30
  Re: Proactive Planning is Professional   04/13
  Re: owning your own business is always fun   04/18
  Re: owning your own business is always fun   04/19
  Re: owning your own business is always fun   04/24
  Re: 5-axis machining of arch top shutters   05/03
  Re: buying on the cheap   05/06
  Re: Clients going to competition   05/15
  Re: Music in the Shop   05/18
  Re: Music in the Shop   05/21
  Re: Music in the Shop   06/06
  Re: Selling an Architectural Millwork Business   05/22
  Re: Selling an Architectural Millwork Business   05/31
  Re: Selling an Architectural Millwork Business   06/01
  Re: Finding your niche   08/01
  Re: Daily task sheet   08/14
  Re: Pole barn vs steel building   09/07
  Re: Commercial Case Goods   09/17
  Re: Need Help with a problem   10/24
  Re: Is service just as important as product?   10/23
  Re: Workers compensation   11/04
  Re: Creating a Job or creating a Business   11/13
  Re: Business And Management   11/21
  Re: Officially retired   01/02
  Re: Is there a market? Child safety latch   01/25
  Re: Proposal   01/29
  Re: Woodworking and Cabinet shows   02/14
  Re: Considering a Partner   03/04
  Re: Career change to estimating   03/08
  Re: Quickbooks software?   05/03
  Re: Doing right by my employer   07/03
  Re: Selling Shop Tools   07/16
  Re: Organizing/Labeling Job Materials   07/16
  Re: Foreman uses the Buddy System   07/20
  Re: Foreman uses the Buddy System   07/28
  Re: Foreman uses the Buddy System   07/31
  Re: Considering Taking Doors / Drawers In House   08/06
  Re: Business   08/13
  Re: TI   09/06
  Re: Annual merit raises, etc   11/04
Cabinetmaking Forum
  Re: Rabbeting 3/8 lip doors on shaper   10/01
  Re: laguna resaw blades worth it or not   10/20
  Re: Travel blocks/ skid blocks   10/25
  Re: 3PH Timesaver in 1PH shop?   10/31
  Re: 3PH Timesaver in 1PH shop?   11/01
  Re: Anyone make stop flutes on their moulder?   11/01
  Re: Hidden door hardware   11/22
  Re: how our employees ignore our attempt at systems   12/30
  Re: how our employees ignore our attempt at systems   01/05
  Re: Double stacking cutters on a shaper   12/29
  Re: Double stacking cutters on a shaper   12/30
  Re: Double stacking cutters on a shaper   12/30
  Re: Double stacking cutters on a shaper   12/30
  Re: festool   01/06
  Re: festool   01/07
  Re: Stile and rail question   01/10
  Re: Window Restoration hardware   01/11
  Re: Basswood in service stability   01/19
  Re: Basswood in service stability   01/19
  Re: Warped panel in door   01/20
  Re: equipment upgrades?   01/22
  Re: Crescent bandsaw tires   01/26
  Re: Best way to get water out of airlines   01/26
  Re: alder   02/07
  Re: Movable Countertop   02/13
  Re: shaper to clean melamine   02/20
  Re: Pres or ceo of jet/powermatic   02/24
  Re: best way to glue mitered doors   02/27
  Re: best way to glue mitered doors   03/09
  Re: Please Help: Are these side panels right?   03/16
  Re: Old tablesaw   03/26
  Re: Wood movement-doors   04/02
  Re: limbs to make lumber   04/06
  Re: Stave core cabinet doors   04/06
  Re: Stave core cabinet doors   04/07
  Re: Best finish for patio furniture   04/27
  Re: What do u all think about this product?   04/28
  Re: What do u all think about this product?   04/28
  Re: What do u all think about this product?   04/29
  Re: Decorative Bar Railings   04/29
  Re: How Would You Build This?   05/28
  Re: Portercable 505 type 2 half sheet sander issues   06/11
  Re: Marquetry knife---anyone do this craft?   05/30
  Re: Question   06/13
  Re: Festool sanding pads   06/18
  Re: Square Maximum height   06/19
  Re: Pocket Holes   06/24
  Re: Pocket Holes   06/25
  Re: Pocket Holes   06/29
  Re: Hardware for joined doors   07/17
  Re: chop saws   07/24
  Re: projects in Florida   07/27
  Re: Jointer planet combo return results from AWFS   07/30
  Re: Small jobs   07/29
  Re: Best blade for resaw?   09/03
  Re: Ideas on building desk   09/22
  Re: step shaker cabinet doors   09/30
  Re: Question about differential expansion of lumber   10/31
  Re: Habitual Lateness   11/13
  Re: Built in going between 2 walls?   11/20
  Re: notching 2x4   12/08
  Blumotion clearances   12/30
  Re: Blumotion clearances   12/30
  Re: Blumotion clearances   12/30
  Re: Blumotion clearances   12/31
  Re: Ingrisg hardwar instructions   01/16
  Re: one dust collector or two   01/28
  Re: one dust collector or two   01/28
  Re: Just for fun question?   02/02
  Re: walk through pantry hinges   02/09
  Re: Powermatic 2700 shaper spindle bearing replacement   02/24
  Re: Veneering a Luan door   03/14
  Re: Veneering a Luan door   03/16
  Re: Drum Sanding   04/01
  Re: adding a middle shelf to a turned legs island   04/15
  Re: Does gang ripping make straight boards?   04/28
  Re: Reliable shop miter saws?   05/28
  Re: Radius fishtank cabinetry   06/20
  Re: WOOD MOVEMENT   06/30
  Re: MITER SAW   07/08
  Re: How much cross-grain is it okay to glue?   07/11
  Re: How much cross-grain is it okay to glue?   07/13
  Re: Long runs of power cord for equipment   07/15
  Re: Problem Customer   07/21
  Re: Planer Digital Read Out   07/21
  Re: Planer Digital Read Out   07/21
  Re: Sanding dust   08/08
  Re: Sanding dust   08/12
  Re: how much would you pay?   08/26
  Re: Phase Converter Help   10/13
  Re: Property Tax Apprehension   10/20
  Re: feeder on the jointer   11/10
  Re: when can i cheat balancing a veneered panel?   11/21
  Re: start up cabinet shop   12/14
  Re: start up cabinet shop   12/16
  Re: Looking for a high quality cabinet doors manufacturer   12/23
  Re: Large wood desk top with miters.   01/22
  Re: Best Shapers   01/26
  Re: Wall Safe   02/07
  Re: Thoughts on a tunnel arch   02/20
  Re: wine cabinet   03/13
  Re: too much clamping pressure - starved joints?   03/17
  Re: Tall oversized raised panels   03/20
  Re: Cold Press panels   03/30
  Re: laminating the back of a raised panel metal Entry door   04/06
  Re: SCMI R9   05/01
  Re: Digital guages for Vertical panel saw   05/01
  Re: Digital guages for Vertical panel saw   05/01
  Re: Digital guages for Vertical panel saw   05/03
  Re: Festool   05/30
  Re: Dowels in cope and stick joints   06/03
  Re: Ripping Planks: The movie   06/05
  Re: doors cracked after delivery need advice   06/09
  Re: Just looking for experience and wisdom?   06/12
  Re: Just looking for experience and wisdom?   06/12
  Re: Just looking for experience and wisdom?   06/16
  Re: Heat VS glue   07/07
  Re: Custom Dog Gate Hardware   07/28
  Re: Osage Orange   07/28
  Re: slr usage   08/17
  Re: slr usage   08/23
  Re: slr usage   08/23
  Re: Dust collector question   08/27
  Re: Blade sharpening   09/05
  Re: power feeder issues   09/08
  Re: Ripping 36 Degree Mitre   09/11
  Re: Great featherboard hold-down   09/12
  Re: Great featherboard hold-down   09/12
  Re: Great featherboard hold-down   09/13
  Re: Countertop finish   09/26
  Re: Large Conference Table   10/07
  Re: edge gluing direct from s4s/molder   10/15
  Re: bowed cabinet door   10/18
  Re: bowed cabinet door   10/24
  Re: truing an import slr   10/30
  Re: RO sander question   10/31
  Re: Bar Foot Rail   11/27
  Re: Peeled Tree Stumps   11/29
  Re: Xmas small gift   12/06
  Re: Adjusting large cabinet doors.   12/22
  Re: Adjusting large cabinet doors.   12/22
  Re: How to change careers   12/27
  Re: Stop block   01/04
  Re: What happened?   01/30
  Re: What happened?   01/31
  Re: Shaker style cabinets   02/05
  Re: Correct glue for stile & rail doors   02/24
  Re: Pullout Table Hardware   03/10
  Re: Medex for raised panels   03/14
  Re: Medex for raised panels   03/14
  Re: Laguna wide belt sander   03/14
  Re: how to create inverse profile of ogee door/window trim   03/19
  Re: Door with solid wood slats on one side   04/03
  Re: Door with solid wood slats on one side   04/04
  Re: Murphy bed hardware   04/30
  Re: Shaper opinions   05/06
  Re: Shaper opinions   05/08
  Re: Door Making Process   05/14
  Re: Door Making Process   05/15
  Re: Working with teak   05/26
  Re: tools from the past   06/19
  Re: tools from the past   06/19
  Re: Old Delta shapers   06/20
  Re: Inset doors   07/21
  Re: Shiplapped cabinet back   08/03
  Re: Pocket door hardware disaster   08/22
  Re: Pocket door hardware disaster   08/23
  Re: Pocket door hardware disaster   08/25
  Re: Chisel sharpening   09/05
  Re: Home made door clamp   09/24
  Re: Edge Stop Grooving   10/08
  Re: Table Saw Out feed Table   10/10
  Re: 2 shaper set up   11/13
  Re: Lighting for a Cabinet Making / Furniture Making Shop   11/21
  Re: Velvet jewelery drawers   11/29
  Re: Digital Locks   12/07
  Re: Sugatsune hinges   12/18
  Re: clamping/ glueing   01/02
  Re: Power feeder alignment   01/31
  Re: Power feeder alignment   02/01
  Re: live edge wood   02/12
  Re: Any idea what could cause this 3 years later?   03/01
  Re: Retiring and looking for cabinet makers to fill in   04/03
  Re: 5-piece Doors with Vertical Grain Rails   04/17
  Re: Humidor cabinet   05/03
  Re: Anyone know the name of this machine?   05/16
  Re: Wide Heavy Doors   05/30
  Re: swelling in cabinet doors   06/12
  Re: Does anyone have one of these?   06/14
  Re: Fold down dining room table   06/17
  Re: Master bed   06/17
  Re: Industrial Chop Saws   06/22
  Re: conference table substrate   07/06
  Re: conference table substrate   07/09
  Re: Mdf rail coped to hardwood   07/09
  Re: Seeking Mentor Near Indiana   07/10
  Re: Why are these end panels bowing?   07/31
  Re: Removing Wood Glue   07/26
  Re: Assembly workstation in action - 78 cabinets assembled in 7.5 hours   07/26
  Re: Hidden Doors - Soss vs. Piano Hinge   07/28
  Re: Hidden Doors - Soss vs. Piano Hinge   07/31
  Re: Shop layout help   08/26
  Re: Small/Open End Wide Belt Sanders   08/26
  Re: Festool Sanders   09/02
  Re: End grain bar top   09/18
  Re: End grain bar top   09/20
  Re: X-Mullion Doors   09/26
  Re: Plunging a moulding face into a shaper cutter   10/21
  Re: Architecttural Drawings   10/16
  Re: Grizzly 3100Z Twin Drum Sander Belt Tracking Problems   10/27
  Re: Soss/Sugatsune/Tectus   11/15
  Re: How to make these without warping   11/15
CAD Forum
  Re: High End-- Low End   06/07
CNC Forum
  Re: LAGUNA CNC   03/17
  Re: True divided Muntin bars in CNC   10/25
  Re: True divided Muntin bars in CNC   10/27
  Re: Beaded Door   02/15
  Re: Beaded Door   02/15
  Re: How many spindles are there in a CNC milling machine?   05/15
  Re: I must be a total duh!   01/17
Commercial Kiln Drying Forum
  Re: White oak color   12/09
  Re: White oak color   12/10
Dust Collection, Safety and Plant Operation Forum
  Re: Machinery Reseller Fraud???   10/05
  Re: dust collector noise   01/06
  Re: dust collector noise   01/07
  Re: 30 HP Cyclone Dust Collector   01/30
  Re: your recommendation for an automatic full-barrel shutoff   04/22
  Re: your recommendation for an automatic full-barrel shutoff   05/05
  Re: Ambient dust in shop..what to do?   05/27
  Re: Question on Ductwork   09/18
  Re: Question on Ductwork   09/19
  Re: Wood waste for heat   11/06
  Re: Wood waste for heat   11/08
  Re: Recommendations for power feeders to feed osb in a truss plant   02/08
  Re: Dust bags holes   09/29
  Re: Anyone know who makes this ancient dust collector?   11/07
  Re: Anyone know who makes this ancient dust collector?   11/11
  Re: Making a sleeve from collector to trash can   12/13
  Re: Making a sleeve from collector to trash can   12/13
  Re: Making a sleeve from collector to trash can   12/14
  Re: Owner won't invest in dust collection--how do I make dollar bill argume   03/02
  Re: shop made collection system--could this work?   05/11
  Re: Safety guards on everything   10/02
  Re: Dust collection safety requirements, bypass of moulder safety devices   06/16
  Re: Dust collection safety requirements, bypass of moulder safety devices   06/21
  Re: Is My D C Too Small?   08/14
  Re: LMC 260IRW-B dust collector   04/22
  Re: Dust collector outdoors   05/10
  Re: Dust collector outdoors   05/12
  Re: Dust Collector Sucking up conveyor belt   06/14
  Re: replacing dust collector bottom bags with barrels   07/21
  Re: How much CFM   11/27
  Re: Dust collection   12/14
  Re: Dust collection   12/20
  Re: Dust collection   12/21
  Re: Dust collection   12/22
  Re: Dust collection   12/22
  Re: Best filter media for shaker baghouse   12/15
  Re: Central dust collection   01/10
  Re: Alternative to Nederman S Series Dust Collector   03/21
  Re: Grizzly G0525   03/27
  Re: Machinery Maintenance   03/28
  Re: Oneida Filter Filling with shavings   04/21
  Re: Fire Code Violation - HELP   08/09
  Re: Cheapest way to collect dust and shavings from small cabinet shop   08/29
  Re: Cheapest way to collect dust and shavings from small cabinet shop   08/30
  Re: Bag House Retrofit to Larger Bags   10/02
  Re: Bag House Retrofit to Larger Bags   10/03
  Re: Bag House Retrofit to Larger Bags   10/05
  Re: New Shop! Setting up the dust collector   01/21
  Re: Needing Help With Torit Dust Collector   02/12
  Re: Correct definition for dust release   02/18
  Re: Dust/shavings collection for DJ-20 jointer   05/09
  Re: dust collector in basement   06/06
  Re: Cyclone Exhaust Questions?   10/17
Finishing Forum
  Re: Refinishing apartment woodwork - mismatch   11/23
  Re: Rotary polisher   01/07
  Re: Krystal CV on a exterior table   02/16
  Re: finishing wood top debate   02/25
  Re: Talking to customer about what to make an outdoor bench out of   05/04
  Re: exterior finish   08/11
  Re: Sealing Planter Boxes   10/02
  Re: Exterior finish for mahogany   10/22
  Re: Polyurethane & warping   12/08
  Re: Matching a Restoration Hardware sample   08/16
  Re: face frame movement   12/07
  Re: face frame movement   12/08
  Re: finish for aromatic cedar   01/10
  Re: First Big Wall-art: it cupped...   02/23
  Re: First Big Wall-art: residual questions   02/25
  Re: Exterior Door   05/25
  Re: Best way to repair?   08/01
  Re: wooden door in shower   08/23
  Re: Taming Chatoyance???   09/29
  Re: Taming Chatoyance???   09/29
  Re: Finish recommendations for Civilians.   12/28
  Re: wood glue-up telegraphing through high gloss polished   05/31
  Re: exterior finish failure   10/31
  Re: Restoration Hardware   11/13
  Re: quilted maple   01/21
  Re: quilted maple   01/21
  Re: latex paint drips on my vanity cabinet door   02/18
  Re: Painting over 'footballs' in russian/baltic birch   08/29
  Re: Exterior door   10/14
Forestry Forum
  Re: National Champion Black Walnut   02/13
  Re: Teak Talk   07/21
  Re: Teak Talk   07/22
  Re: Teak Talk   08/28
  Re: W Red Cedar Allergy   09/18
  Re: Western Red Cedar Solvent Soluble Extractives   11/04
  Re: Western Red Cedar Solvent Soluble Extractives   01/21
Furniture Forum
  Re: Designing a table to prohibit warping   11/27
  Re: Designing a table to prohibit warping   11/28
  Re: Designing a table to prohibit warping   11/29
  Re: Designing a table to prohibit warping   12/01
  Re: Table Tops for restaurant with mitered patterns   12/10
  Re: Bent Wood Pieces   12/08
  Re: Calculating pedestal size for table   12/19
  Re: Fuzzy wood strips issue at End tenoning station   12/20
  Re: making a laminated table top   01/03
  Re: making a laminated table top   01/08
  Re: Wobbly table legs   01/09
  Re: Molding Question   01/21
  Re: Molding Question   01/22
  Re: Fix-a-twist for wood doors!   02/14
  Re: Dining top from hardwood flooring   02/23
  Re: Constructing arched base for coffee table   03/04
  Re: Pedestal table stability   03/22
  Re: Locks for touch latch   04/03
  Re: Large table top help needed   04/10
  Re: Large Commerical Bar Top   05/13
  Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??   06/10
  Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??   06/10
  Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??   06/17
  Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??   06/18
  Re: Historic Outdoor Bench   07/11
  Re: 2" FACE grain Poplar Plug or 2" Plug Cutter Needed   06/23
  Re: Steam bending molding around a curved staircase   07/10
  Re: Steam bending molding around a curved staircase   07/12
  Re: Steam bending molding around a curved staircase   07/21
  Re: Steam bending molding around a curved staircase   08/23
  Re: Solid table tops   08/02
  Re: Solid table tops   08/04
  Re: "Soft Spots" - a hardwood problem that's difficult to describe   08/15
  Re: "Soft Spots" - a hardwood problem that's difficult to describe   08/15
  Re: Tooling and techniques for chair parts   08/22
  Re: Bora Care causes glue adhesion issues??   09/03
  Re: checks and flakes in white oak causing problems   09/10
  Re: cutting tapered lamp base 90 degrees   09/10
  Re: Curly Maple Top   09/21
  Re: Curly Maple Top   09/22
  Re: Curly Maple Top   09/27
  Re: Professionalism   09/21
  Re: Professionalism   09/22
  Re: Historic furniture price comparisons   10/30
  Re: Historic furniture price comparisons   10/31
  Re: Historic furniture price comparisons   11/01
  Re: Historic furniture price comparisons   11/02
  Re: Dining table and bar top - solid vs veneer   11/09
  Re: Dining table and bar top - solid vs veneer   11/11
  Re: Table leg joint strength   12/02
  Re: Jinny Lind Bed   12/11
  Re: Jinny Lind Bed   12/12
  Re: Jinny Lind Bed   12/13
  Re: More on Steam Bending   12/18
  Re: Want to build a Pilates Reformer machine   01/15
  Re: wood movement in 55" dia table top   01/27
  Re: mortising jig   02/05
  Re: New church alter shrunk and imploded   02/24
  Re: New church alter shrunk and imploded   02/25
  Re: New church alter shrunk and imploded   02/26
  Re: New church alter shrunk and imploded   03/01
  Re: Steam Bending 2" thick walnut   04/02
  Re: Mesquite tabletop question   04/25
  Re: modern furniture   05/04
  Re: Preventing warp in pedestal table tops   05/19
  Re: Wood Light Pendants for Track Lighting   05/22
  Re: Festool TS 75 Saw vs New Table Saw   06/01
  Re: Festool TS 75 Saw vs New Table Saw   06/03
  Re: Through tenon modern tables   06/15
  Re: Flattening walnut slabs while minimizing thickness reduction   07/01
  Re: Failed glue joint   07/26
  Re: Failed glue joint   07/30
  Re: Problem - upholstery rippled edge   08/26
  Re: Problem - upholstery rippled edge   08/26
  Re: wood movement   09/13
  Re: routing a continuous dado around corners   09/20
  Re: Furniture Beetle?   09/30
  Re: Furniture Beetle?   02/17
  Re: Grizzly 1066Z drum sander-need input   11/01
  Re: Grizzly 1066Z drum sander-need input   11/03
  Re: Large solid wood panel   11/07
  Re: bench for shower   11/07
  Re: bench for shower   11/12
  Re: Sanding Extension table edges   12/11
  Re: Black walnut desk top   02/13
  Re: desk top veneer and nosing   03/02
  Re: Quilted Maple   03/07
  Re: Quilted Maple   03/08
  Re: Quilted Maple   03/13
  Re: Split headboard   03/28
  Re: Choosing water stones   05/28
  Re: large furniture parts   06/22
  Re: large furniture parts   06/23
  Re: Paper Wheel Sharpening   09/27
  Re: Paper Wheel Sharpening   09/28
  Re: Paper Wheel Sharpening   09/30
  Re: How to a 25 x 156 edge grain counter top   01/28
  Re: How to a 25 x 156 edge grain counter top   01/30
  Re: Base size   03/24
  Re: Do laminated solid wood plies move like solid wood?   03/28
  Re: Crest rail makeup for contemporary settee   04/30
  Re: Conference table construction questions   09/13
  Re: Table legs   10/26
  Re: Anyone know where i can find a set of plans   01/07
  Re: Squaring up Solid Lumber   01/23
  Re: Squaring up Solid Lumber   01/23
  Re: TEAK MATS FOR SHOWER FLOORS   01/27
  Re: Alaskan Yellow Cedar   02/06
  Re: Quickly reverse timber shrinkage?   03/14
  Re: Interior door veneer splitting   03/17
  Re: What Pine Species?   03/31
  Re: Pm shapers and feeders   05/20
  Re: gluing slab tables   06/13
  Re: console table structure/ makeup   11/05
  Re: Advice on a trestle table with leaves   12/27
  Wendel Castle Dies   01/23
  Re: Table Top Curve/ Warp   01/25
  Re: How to rubberized sanding table top   02/06
  Re: Using air dried wood and warping   02/12
  Re: Using air dried wood and warping   02/13
  Re: Using air dried wood and warping   02/13
  Re: Using air dried wood and warping   03/28
  Re: Restaurant Table Top   02/28
  Re: Best Material For a Folding Table Top Surface   03/06
  Re: Best Material For a Folding Table Top Surface   03/06
  Re: planked table top   04/05
  Re: Filling large voids in slabs with epoxy   06/06
  Re: 1/2" or 3/4" pipe clamps?   09/16
  Re: Table top table makers   10/09
  Re: what kind of wood is this?   12/03
  Re: conference table leg spacing   01/21
  Re: conference table leg spacing   01/23
  Re: Mold making   04/17
  Re: Mold making   04/20
  Re: Mold making   04/22
  Re: Exterior raised panel weather protection   05/03
  Re: Table top sag calculation   05/30
  Re: Table top sag calculation   06/02
  Re: How to know your market?   06/06
  Re: Anyone use a Table Top Mortising Machine?   08/05
  Re: Anyone use a Table Top Mortising Machine?   09/27
  Re: chairs   08/26
  Re: chairs   08/30
  Re: questions about ash   10/15
  Re: Need solution for furniture manufacturing   10/16
  Re: Contrasting wood banding on table   10/31
Cabinet and Millwork Installation Forum
  Re: Cracked butcher block   10/30
  Re: What happened to the hoverpad?   03/16
  Re: Emtek mortise lock   10/28
  Re: Emtek mortise lock   10/28
  Re: Crown on vaulted ceilings   12/30
  Re: Crown on vaulted ceilings   12/31
  Re: Crown on vaulted ceilings   01/01
  Re: Coping saw teeth direction   03/12
  Re: Coping saw teeth direction   03/24
  Re: Stair Treads Cupping   05/23
  Re: Stair Treads Cupping   05/23
  Re: Moving to Florida   07/08
  Re: Moving to Florida   07/11
  Re: Moving to Florida   07/15
  Re: Hand rail for fanned stairs   02/11
  Re: Shaper bits   03/31
  Re: Clearance to tip a unit in place   08/05
  Re: replacing broken table slides, installing center leg   10/12
  Re: Library Bookcase with Swing Out Cabinet   06/04
  Re: Library Bookcase with Swing Out Cabinet   06/20
  Re: Working with Cumaru   09/12
  Re: Keeping the doors open   09/24
Laminating and Solid Surfacing Forum
  Re: need advice for laminating 8/4 Hickory   11/04
  Re: Maple veneer cross grain seam--best way to hide it?   04/02
  Re: Maple veneer cross grain seam--best way to hide it?   04/03
  Re: Maple veneer cross grain seam--best way to hide it?   04/06
  Re: Maple veneer cross grain seam--best way to hide it?   04/07
  Re: Maple matchbook butcher block issues   04/08
  Re: Maple matchbook butcher block issues   04/11
  Re: Warping Particleboard   10/04
  Re: laminating white oak onto MDF substrate   05/24
  Re: Laminate/Veneer vacuum press?   09/20
  Re: Laminate/Veneer vacuum press?   10/02
  Re: 1/4” solid wood over and under mdf   09/30
  Re: 1/4” solid wood over and under mdf   10/16
Sawing and Drying Forum
  Re: Cabin wood species   12/17
  Re: Need help with wood ID   01/16
  Re: what's the best wood near ocean   01/23
  Re: Resawing Questions   12/21
  Re: How to cut a diamond shaped panel   01/20
  Re: Giant American Holly - Need Advice   06/12
  Re: Bandsaw Blade width Optimum for resawing KD door stile skins   03/03
  Re: Old growth Cherry, possible value?   08/28
  Re: Exterior wood   09/06
  Re: Drying an oak slab for coffee table   04/13
  Re: defect in select white oak KD   10/24
  Re: CNC Carving A Trunk   05/30
  Re: Machinery pricing   08/21
  Re: Sawing and drying shingles   09/18
Solid Wood Machining Forum
  Re: Widebelt accuracy   10/04
  Re: milling squareness problem   10/29
  Re: milling squareness problem   10/30
  Re: milling squareness problem   10/30
  Re: milling squareness problem   10/31
  Re: Radial Arm Saw for Dado   01/22
  Re: Radial Arm Saw for Dado   01/22
  Re: shaper problem   02/08
  Re: jointer question   02/18
  Re: Snipe on New 15" Grizzly Planer???   03/21
  Re: Snipe on New 15" Grizzly Planer???   03/23
  Re: 1.25" cutter heads?   05/01
  Re: 1.25" cutter heads?   05/02
  Re: Tenon heads for 10hp SCM T130   05/02
  Re: Delta 3 hp shaper   05/04
  Re: Delta 3 hp shaper   05/06
  Re: RE: Planer Knives Sharpening   06/28
  Re: Weinig Molder   07/11
  Re: Replacing table saw with Straight Line Rip   08/07
  Re: Groovers o.k. for tenoning?   09/04
  Re: Groovers o.k. for tenoning?   09/05
  Re: Groovers o.k. for tenoning?   09/13
  Re: Box joint machine   09/11
  Re: Straight lining on gang rip saw?   09/25
  Re: Spindle shaper bearings   10/23
  Re: What is the best planer?   10/25
  Re: Delta DC-33 parallel thickness issue   11/21
  Re: Delta DC-33 parallel thickness issue   11/22
  Re: Pulling hair out over 3 phase   12/29
  Re: Jointer troubleshooting   01/02
  Re: T&G Shaper Cutter   01/17
  Re: Adequacy of shaper for stacked tooling   01/19
  Re: Adequacy of shaper for stacked tooling   01/23
  Re: Laguna LT1400 3hp bandsaw   01/20
  Re: custom shaper idea   01/23
  Re: custom shaper idea   01/27
  Re: Tersa cutter head   01/30
  Re: Tersa cutter head   02/02
  Re: Custom built surfacing machine for slabs   02/12
  Re: Custom built surfacing machine for slabs   02/12
  Re: Gang rip blade configuration   02/23
  Re: Gang rip blade configuration   02/24
  Re: What do you do with your bent lumber?   03/01
  Re: What is the sketchiest thing you've ever seen done with a machine?   03/01
  Re: What is the sketchiest thing you've ever seen done with a machine?   03/22
  Re: What is the sketchiest thing you've ever seen done with a machine?   03/22
  Re: physics, table saws, and flying lumber   03/15
  Re: Trouble Ripping 6/4 Soft Maple   03/25
  Re: Safety question about upright very acute angled cut on a 5/8 panel   03/31
  Re: Another safety/jig/sketchy cut question   04/06
  Re: Another safety/jig/sketchy cut question   04/07
  Re: Another safety/jig/sketchy cut question   04/09
  Re: Making 100% flat Table for Solid Wood Working   04/27
  Re: Rip saws   07/09
  Re: Delta 20" Bandsaw Tire Replacement...   07/24
  Re: Gang Rip Saws   08/20
  Re: Hitachi cb75F resaw   09/19
  Re: 1-3/8" thick solid wood rail & stile passage doors   09/27
  Re: Gang ripsaw outfeed chain   10/07
  Re: Weinig Profimat 23   10/13
  Re: wood chip denting   11/09
  Re: wood chip denting   12/19
  Re: Steel City Jointer   11/19
  Re: Chain Morticer   11/23
  Re: Milling small raised panels   12/18
  Re: QS white oak end grain spotted appearance   12/29
  Re: Planer or Jointer first??   01/16
  Re: Building room doors- cope or stick first?   04/06
  Re: bridgewood 20" planer   06/15
  Re: End matching and crosscutting flooring from molder   07/08
  Re: Which 26"-32" Thickness Planer for various kind of woods   07/21
  Re: Which 26"-32" Thickness Planer for various kind of woods   07/22
  Re: shaoer purchase   08/04
  Re: wideblade 5 " verticle or horizontal 1"throwaway   08/16
  Re: parts for SCMI P170 or P230   09/21
  Re: Edge Joint Machine   09/27
  Re: SCMI S63 planer   10/17
  Re: Matching V-belts   11/08
  Re: Supermax 2X25 drum sander just not aggressive?   02/02
  Re: Pricing Moulding Knives   02/06
  Re: Metal Detector For Staples!   02/15
  Re: Flat Panels   02/23
  Re: Straight line Rip Saw   03/17
  Re: Scalloped drawer fronts   04/18
  Re: Scalloped drawer fronts   04/18
  Re: Making Rounded Coffin Top   07/07
  Re: Loss of a good man Chuck Rankin   08/18
  Re: small cedar display case am I ok building   09/14
  Re: Smaller (20") planers with segmented rollers?   10/03
  Re: Shop Fox Widebelts   11/27
  Re: Machining brass and wood   11/29
  Re: Oliver 4920 SLR   12/07
  Re: Breaking edges efficiently and consistently   01/23
  Re: Breaking edges efficiently and consistently   01/25
  Re: S4S machine   01/24
  Re: S4S machine   02/02
  Re: Finish planing, helical and quick change knives   02/02
  Re: 72'' or longer straight metal bar   02/08
  Re: Best way to make window grilles (for IGU)   02/16
  Re: better (older) rip saw - mattison or diehl?   03/02
  Re: better (older) rip saw - mattison or diehl?   03/03
  Re: better (older) rip saw - mattison or diehl?   03/05
  Re: better (older) rip saw - mattison or diehl?   03/06
  Re: Longitudinal lines on wood caused by wide belt sander   05/08
  Re: 16"/20" 4 post import planers   06/21
  Re: Sicar Machinery   08/29
  Re: broken bandsaw blades   12/04
  Re: 4 head 226 Mattison moulder   03/12
  Re: Grizzly 18-36 Drum SDander   05/16
  Re: Grizzly 18-36 Drum SDander   05/23
  Re: Lauderdale-Hamilton 40 HP Gang Rip Saw   06/13
  Re: Powermatic Model 100 Planer/segmented roller   06/22
  Re: Powermatic Model 100 Planer/segmented roller   07/03
  Re: Widebelt Sander Help Needed   07/03
  Re: RE: Used Wide Belt Sander   07/03
  Re: RE: Grit of wood using a Planer   07/10
  Re: RE: Vacuum Systems   07/16
  Re: RE: Grit of wood using a Planer   08/06
  Re: Home built gang ripsaw plans?   10/16
Value Added Wood Products Forum
  Re: My sawdustburner   01/02
  Re: My sawdustburner   01/03
  Re: Looking For A Wood Products Manufacturer   09/04
Veneer Forum
  Re: Lifting veneer   08/28
  Re: Veneer over simple mdf structure   10/22
  Re: peel and stick veneer, does it hold up?   02/01
  Re: peel and stick veneer, does it hold up?   02/01
  Re: Glue Up Misshap   05/03
  Re: Glue Up Misshap   05/03
  Re: Glue Up Misshap   05/06
  Re: Glue Up Misshap   06/05
  Re: veneer issues   07/02
  Re: What goes in the Bag?   09/11
  Re: vacuum press   10/15
  Re: Veneer Exterior door   11/20
  Re: Veneer Exterior door   11/20
  Re: Veneer Exterior door   11/27
  Re: mahogany veneer not bonding to substrate   01/14
  Re: mahogany veneer not bonding to substrate   01/15
  Re: mahogany veneer not bonding to substrate   01/17
  I've Had It With Uni-Bond!   02/04
  Re: I've Had It With Uni-Bond!   02/07
  Re: I've Had It With Uni-Bond!   02/11
  Re: Qtr Cut Veneer Over Flatsawn   03/23
  Re: Veneer over solid ash   03/27
  Re: Veneer from Marquetry?   06/13
  Re: Veneer from Marquetry?   07/01
  Re: Veneering a mdf raised panel   06/26
  Re: Veneering a mdf raised panel   06/29
  Re: screws / staples popping up   12/27
  Re: Spalted Beech???   02/12
  Re: Handheld veneer stitcher   05/19
  Re: veneer over solid wood   06/15
  Re: Magnifying glasses headband   07/20
  Re: heater for press   08/06
  Re: Rift and quartered white oak veneer?   02/19
  Re: Diehl Veneer splicer   10/31
  Re: Titebond for veneering?   11/07
  Re: Titebond for veneering?   11/08
  Re: What veneer is this?   11/21
  Re: applying veneer to safe room door   04/26
  Re: Trying to veneer a mini fridge   06/26
  Re: Solid 3/4 to 3/4 veneer   09/12
  Re: Any advice for glueing up Gonzalo Alves, (tiger wood), veneer?   01/11
  Re: What is this veneer??   01/05
  Re: What is this veneer??   01/17
  Re: What is this veneer??   01/29
  Re: Macassar Ebony Elevator Panels   02/28
  Re: Macassar Ebony Elevator Panels   03/04
  Re: Need advice Crotch Mahogany Conference table   05/24
  Re: RE: Old Wood Veneer   07/19
  Re: RE: Old Wood Veneer   09/24
  Re: RE: Old Wood Veneer   09/24
  Re: Veneer backer shelf life on unused veneer   07/19
WOODnetWORK Forum
  Re: Dyslexic Woodworkers?   07/14
  Re: school project   09/10
  Re: Nib on old hand saw   11/06
  Re: Nib on old hand saw   11/06
  Re: creating spiral rope design in columns   12/31
  Re: creating spiral rope design in columns   01/01
  Re: Mass production   01/28
  Re: Mass production   02/13
  Re: New Website   02/14
  Re: Testing moisture resistance in particleboard   02/27
  Re: Testing moisture resistance in particleboard   02/27
  Re: Edge jointing: Festool Domino vs. biscuit jointer   03/28
  Re: Architects SMH   04/07
  Re: Fungus on untreated wood   07/06
  Re: Old porch handrail fittings   09/30
  Re: If you were to do it all over again?   11/16
  Re: If you were to do it all over again?   11/25
  Re: If you were to do it all over again?   12/10
  Re: Min. depth for tall freestanding shelving units   01/29
  Re: Lost this bid. How much would you have charged?   02/22
  Re: Lost this bid. How much would you have charged?   02/25
  Re: Maybe I'm not crazy.   10/10
  Re: oak front door   11/15
  Re: need help creating mdf door with glass   12/13
  Re: is this African Walnut?   04/13
  Re: Grizzly   07/02
  Re: curved joints   08/18
  Re: Waste Disposal & Collection   02/11
  Re: mahogany rail with vertical volutes   10/20
  Re: Eastern Red Cedar Closet Residue   09/27
  Re: The Secret Life of Trees   10/09
  Re: slab wood table and radiant floors   09/08
  Re: Jig for an odd job   10/04
  Re: stacked oak air stains   03/29