In this issue:
Featured Project
You might remember this Before picture of
a barn built in 1780... Ready for
the After? New pictures at the Project Gallery detail the barn's conversion
to a home full of beautiful details and repurposed wood.
http://www.woodweb.com/galleries/project/posts/3986.html
Hot Threads
Burning sawdust in the shop stove... an efficient
way to heat your
workspace with wood waste, or a recipe for disaster? Differing opinions
are offered up:
http://www.woodweb.com/cgi-bin/forums/business.pl?rev=752192
Euro-style corner cabinets: what's the best
way to configure them?
Here's a selection of possibilities:
http://www.woodweb.com/cgi-bin/forums/cabinetmaking.pl?read=752097
Got the right newel cap for your handrail?
Here are some ideas on tooling
and technique.
http://www.woodweb.com/cgi-bin/forums/aw.pl?read=752000
Here's a fun pair of videos that detail one
sawyer's method for preparing
logs that are too big to set on the
sawmill.
http://www.woodweb.com/cgi-bin/forums/sawdry.pl?read=752333
Featured Sawmill
Dead Wood Lumber Company has a long history
- reaching all the way
back to a steam-powered sawmill. Here's what the operation looks like
today...
http://www.woodweb.com/galleries/sawmill/posts/500.html
Web Marketing 101
Search engine optimization is morphing back
to what it should have been
all along - build a great product / service, and tell people about it.
Shared by
Jim Roberts of Roberts WebForge.
The 'New
SEO' is Plain Old Marketing
This issue of the WOODWEB Update is
sponsored in part by
C.R. Onsrud, Inc.:
Manufacturer of CNC routers, inverted routers, and routing accessories
Web highlights:
- Video Demos Online
- Machine Specifications
- 24 Hour Parts and Service
- User Testimonials
www.cronsrud.com
|
Knowledge Base Highlights
See a complete list of the most recent additions
to our Knowledge Base at:
http://woodweb.com/Resources/RSMostRecentKBArticles.html
A shop owner tries to figure out why teeth
in his helical insert planer
heads keep breaking (which leads to further problems and headaches).
http://www.woodweb.com/knowledge_base/Problem_with_Insert_Tooling_Teeth_Breaking.html
The Wood Doctor weighs in on composting chips,
shavings, or sawdust
for use in landscaping or gardening.
http://www.woodweb.com/knowledge_base/Wood_Composting.html
This discussion has extensive advice on tweaking
a vacuum press to
create effective vacuum, even pressure, and a flat result in the product.
http://www.woodweb.com/knowledge_base/Frame_press__Troubleshooting_Flatness_Problems_wit.html
Thoughts are shared on how to machine a
raised door panel that looks
like a very low pitched hip roof.
http://www.woodweb.com/knowledge_base/Fabricating_PyramidShaped_Raised_Panels.html
Here's some advice on steam-bending 2x4 stock
for a curved roof structure.
http://www.woodweb.com/knowledge_base/Steam_Bending_Larger_Boards.html
How much of an employee's workday consists
of actual work on the
shop floor?
http://www.woodweb.com/knowledge_base/Hours_Worked_Versus_Hours_on_the_Clock.html
Video Pick
Quickwood, Inc. features a variety of sanding
and abrasives videos. To view
the videos, click on the link below and scroll down to Quickwood's video
link:
http://www.woodweb.com/VideoLibrary/VLAlpha.html
To UN-subscribe, change your address, or
contact WOODWEB, follow the
instructions at the end of this message. Replies to this Update mailing
will
not reach WOODWEB.
Find out how to promote your company on
the Web. If you're a supplier to
the wood industry, visit WOODWEB's Media Kit:
http://www.woodweb.com/MediaKit/MKindex.html
If you're a woodworking professional, visit
the Woodworker's Directory:
http://www.woodindustry.com
View past WOODWEB Updates at:
http://www.woodweb.com/update_archive
The WOODWEB Update is Copyright (c) WOODWEB,
Inc. 2013
http://www.woodweb.com
|