BIESSE ROXYL 6.0 Edgebander (w/pre-mill & Corner Rounding) + "AIR FORCE" PUR/EVA gluing Technology:
Edgebanding Capacity: Edge thickness for strips min./max. 0.4 - 22 mm (0.02" - 0.87"), coiled material from 0.4 - 3 mm (0.02 - 0.12"); panel thickness from 10 - 60 mm (0.39 - 2.36"), workpiece width min. of 85 mm (3.34"); workpiece length min. 140 mm (5.51"); feed speeds 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM).
Machine Controls: "Roxyl-Matic" Automated machine setup, MS/Windows XP Operating System, floppy drive, and 4 GB HD; USB port, keyboard, and mouse interface.
Flat Screen (17") with color graphics interface: Programs can be easily created and recalled at will; Graphic interface makes programming easy; icons of each unit may be brought up on the screen to show the operator the status of the unit and the parameters, which can be programmed; Edgebander may be operated manually when required, without the necessity to write a program.
Machine In-Feed Configuration:
Pre-Milling Station "FL-502": (2) LH & RH Rotating NC controlled spindles with automatic center positioning.
Edge Magazine: Automatic for processing coiled and strip edgebanding material + a (2) position vertical Coil Magazine Cart.
Pressure Section: Servo controlled programmable pressure section with (1) large driven roller and (4) idle rollers.
Gluing System:
EVA (Hot Melt) "QM-705": Quick premelting granulate with glue roller applicator to cover conventional edgebanding material.
AirForce "VC-710": High pressure, hot air system to reactivate special precoated edge material (commonly referred to as laser edge).
Workstations:
End Trimming Unit "IT90-S": Front & rear trimming motors, uni-point swivel 0° - 15° bevel, programmable pneumatic change-over from flush to bevel.
Rough/Flush Trimming Unit "RS-100": Top/Bottom pre- or flush trimming motors
Flush/Bevel/Radius Combination Trimming Unit "RF-400": Servo controlled, (4) Servo motors (one for horizontal tool position, one for tool up/down position); using combination bevel/radius/flush insert knives; pre-positioning of motors by pneumatic air cylinders.
Anti-Adhesive "ADZ-700" Automatic Spray Unit with: Glue release agent preventing glue to adhere to workpiece's surfaces.
Corner Rounding Unit "CR-202": (2) Motors for front/back corner and upper & lower edge profiling.
Profile Scraping Unit "RBK-503": Top/Bottom 2-axis NC programmable knife positioning (i.e., 2 - 3 mm radius) for PVC edges.
Glue Scraping Unit "RCC-701": Flat, top/bottom, digital positioning indicators, pneumatic controlled for in/out position.
Clean Spray Unit: Top/Bottom cleaning agent spray nozzles.
Buffing Station "SP-501": Top & Bottom buffing motors with 150 mm (6") cloth buffing wheel diameter; adjusts in multiple directions.
Biesse ROXIL 6.0 Edgebander
