HOMAG KAL 310/4/A3/S2 Edgebander (w/Pre-Milling):
Working Capacity: 0.3 - 3 mm Edge thickness cap., min. panel width 22 mm; max. panel thickness 60 mm; Dual speed
Pre-Milling Unit 3481: (2) motors, 3 kW, 9000 RPM each, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence.
Hot Melt Glue System "QA 34" Quick-Melt Unit: with heated glue roller;
Edge Magazine Unit 2456: Automatic (2) coil/strip magazine, coils 0.3 - 3.0 mm.
Pressure Section: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; with pneumatic pressure control for straight edges
HOMATIC "NC 21" Power Control System: Controller operates in Windows-XP environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem.
Workstations:
End Trimming Unit: (2) motors, 0.18 kW - 12,000 RPM each, to cut excess edge on the front & back of the panel.
Flush/Pre-Trimming Unit 3201: Top & bottom trim station, 0.55 kW - 12,000 RPM +/- 1° angle adjustment, manual positioning with digital counters.
Fine/Bevel Trim Unit 3216: (2) motors 0.4kW - 12,000 RPM each, manual positioning with digital counters
Profile Edge Scraping Unit: with electro-pneumatic adjustment
Buffing Unit 4402: Top and bottom with oscillation. (2) motors, 0.25kW, 2850 RPM.
Complete with & Features: Electronic DC brakes on all trim motors; sound cabin for all workstations...
***Please click the link for full description***
Homag KAL 310/4/A3/S2 Edgebander
