Description
• Space requirements – Length is 25’ (7580 mm), Width is 15’5” (4830 mm), Height is 96” (2550 mm).
• Supporting table – Length is 165" (4250 mm), Width is 58" (1500 mm).
• Max. material thickness is 5.9" (150 mm).
• Positioning range - "X" Axis is 190.9" (4850 mm), "Y" axis is 83.5" (2120 mm), "Z" ½-axis is 20.7" (525/250 mm).
• Speed - "X" Axis 263 FPM (80 MPM), "Y" axis 197 FPM (60 MPM), "Z" axis 66 FPM (20 MPM).
• Head travels on THK linear motion guides on all axes. 8 panel support benches with 3 vacuum pods each; capable of loading 2 work pieces at a time; 6 panel feeding rails.
• Multiple stop systems – part positioning stops (1 set for large parts, 1 set for narrow parts); pneumatic side fence; and 4 tilting stops.
• Boring Unit, 3.6 HP (2.7 kW) motor, variable speed from 1,500 - 7,500 RPM.
• (25) independent vertical drill spindles: (14) spindles in X-axis, (9) in Y-axis, and (2) offset for large (35 mm) drills.
• (6) Horizontal spindles, (2 + 2) in X-axis & (1 + 1) in Y-axis.
• Grooving saw with 125 mm dia. saw blade.
• 16 HP (12.0 kW) liquid cooled router motor with automatic tool changer with an HSK63 tool holding system. Powered by a frequency inverter with programmable speed from 1,200 - 24,000 RPM, RH or LH rotation.
• NC controlled C-axis for 360° horizontal processing; 8-position ride-along tool changer.
• 100 m3/h vacuum pump, 3-zone safety mats (will stop machine if operator enters work area) & safety fences.
Listed specifications were taken from manufacturer's technical data. For more information about this woodworking machine, please reach out to us.
Available late February 2025. Rigged out of current location by owner. Picked-up, loaded & trucked off-site by buyer.
