Stock Number: 2637
Friulmac Randomat Multirex End Matcher, with Stackable Spindles for Fast Change-Over
Serial #:3953A
Condition: As Taken From Service
Two Profiling Motors: 10 HP (7.50KW)
Two Tool Changer Motors: 0.5 HP (0.25KW)
Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW)
Central Conveyor Belt: 3/4 HP (0.55KW)
Minimum Part Length: 4-7/8" (120mm)
Minimum Part Width: 1-3/16" (30mm)
Maximum Part Width: 9-7/8" (250mm)
Minimum Part Thickness: 1/2" (10mm)
Maximum Part Thickness: 1-3/16" (30mm)
Minimum Cutter Diameter: 6-5/8" (170mm)
Maximum Cutter Diameter: 7-7/8" (200mm)
50MM Diameter Spindles
11-1/4" (285mm) Spindle length under the nut for stackable tooling
Cutter Speed 9,000 RPM
Four 4-3/4" Dust Ports for each spindle(2 on the top and 2 on the rear side)
Current Voltage: 460V
Friulmac Randomat Multirex End Matcher, with Stackable Spindles
