AL-KO Brand -Made in Germany! -230 volt 3phase electrical -PLC control by Siemens (you can easily set it up to turn on and off automatically with electronic gates and can control the fan speed with the Vfd drive.) Or if your handy many other things can be done with the PLC. -VFD for 10 hp motor -On board fire extinguisher -Pulse jet filter cleaning (automatically or manual) -Rotary airlock means you don't have to empty dust bags (a moulder fills the bags in minutes.) -You would need a transfer fan to move the material out of the airlock discharge and to the outside. Ideally into a hopper above a dumpster or something like that or trailer. You would need a bin vent or small cyclone for that and make it a closed loop system. I used a 2.5 hp blower and it was controlled by the PLC. size of blower depends on how far you need to move the material. -Low hours -Handles a 5 head moulder and a couple other machines fine. -12" ID intake -8" diam. in and out at the airlock. -Parts are available from Martin Woodworking Machinery in Charlotte. -71db...really quiet! -Trouble free unit! -Packaged on a pallet for easy shipping. Can hook to power for you if you need to see it run. See below videos. Note this unit for sale does not have the dust bins but rather the rotary airlock setup which you never have to empty heavy bags of sawdust.
In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.
