Specs:
5 x 10 nesting flat table
Z axis is 9.6 inches
Max material thickness is: 3.9 inches.
Speed: "X" Axis is 236 FPM (72 MPM), "Y" axis is 203 FPM (62 MPM), "Z" axis 82 FPM (25 MPM)
Worktable: "S/C Tech MATRIX" grooved phenolic vacuum table.
(3) Pneumatic locator/positioning pins in "X" axis & (1) pneumatic locator/positioning pins in "Y" axis.
(4) Table vacuum work zones, can be used independently or together for full table area Foot pedal vacuum zone controls.
(1) 12 HP (9 kW) High speed electro-spindle router with "HSK F 63" adaptor; constant duty, variable speed - 1,250 - 24,000rpm, RH or LH rotation
(1) 9-Position ATC rack located at the end of machine
Boring unit with 2 HP (1.5 kW) motor & (7) Independent vertical spindles with "Quick Change" drill bit holders programmable variable speed from 1,500 - 7,500 RPM
Touch-off tool length measuring device
PC Front-End with WEEKE "PC 85T" + Windows "XP" + WoodWOP operating system.
17" TFT Color graphic monitor, keyboard for data entry, PC 85T hand control pendant
(4) 100 m³/Hr Vacuum pumps
Light curtain (machine will stop if operator enters work area), safety fencing,
separate control cabinet.
MachineryAssociates.com listing
