2019 machine in very good condition
5' x 10' Phenolic matrix table
Bumper design eliminate need for photo barriers and reduces floor space
Built in push off device with dust collection flange to sweep the cut parts and vacuum the table simultaneously
Automatic segmented vacuum table with eight (8) auto-controlled zones based on panel size.
Max working thickness: 170mm = 6.69"
Blowing unit with 4 ring nozzle at router tool to improve cut quality and improve dust collection
Pre-arranged for "C" axis- 4th axis
Helical rack and pinion drive in X and Y axes; ball screw in Z axis
Precision linear guides on all 3 axes and on sweeping device
X axis speed: 82 ft/min (25m/min)
Y axis speed: 82 ft/min (25m/min)
Z axis speed: 82 ft/min (25m/min)
BH10 10 spindle boring unit driven by 2.5Hp variable speed motor 2800-6000 rpm; 5 spindles in X, 5 spindles in Y
12Hp HSK spindle with ceramic bearings, variable speed from 1000-24,000 rpm
HSK F63 tooling
10 Position rack tool changer mounted on the end of the machine
Automatic lubrication
Tool touch off device to set tool depth
One working area; 5' x 10' with 2 left origins, 1 front, 1 rear
Two(2) left and (1) front reference pin on the left hand side of table
Two(2) right and (1) front reference pin on the right side of table
Front and back precision linear stops for part placement and to contain the cut parts being pushed off
300m3/hr vacuum pump
PC front end with 21" touch screen, mouse and keyboard
Software: B-Solid 3D Cad/Cam with B-Nest nesting module
Controller: Biesse BH660 PC based with WRT (Windows Real Time) technology
Hand held control keyboard
Includes extra HSK F63 tool holders and collets
Can be seen by appmt in Massachusetts
Local set up and training by previous operator available at reasonable cost to buyer
Rover K FT
