Stock Number: 7232
Heesemann Model MFA Impression 4-Head Wide Belt Sander
Condition: As Taken From Service (OPERATING HOURS 145)
Working Width: 53" (1350mm)
Workpiece Thickness: 0.118" to 6" (3mm to 160mm)
Working Height: 36.2" (880 mm)
Wide Belt Size: 103" x 55" (2620mm x 1400mm)
Cross Belt Size: 189"x6" (4800 x 150mm)
Variable Feed Speed: 10-50 FPM (3-15 mpm)
Vacuum Bed for Safe Movement os Workpieces Shorter than 19.7" (500mm)
All Heads Equipped With:
Variable Speed Belt equipped with Inverter Motor
CSDŽ segmented pad system on all Heads
A pinch roll system, rubber covered and adjustable
An automatic infra-red belt control
Servo cross belt tracking adjustments, for quick and easy belt centering when loading
Head #1: Cross Sanding Unit
Heesemann's Cross Sanding Head Unit Removes Fiber from Solid Wood or can be used to Remove Tape from Veneer
Sanding Belt Speed:6.5 - 65 FPS (2-20 m/s)
Drive Motor: 23HP (17kW)
Head #2: Longitudinal Sanding Unit
Sanding Belt Speed: 6-60 FPS (1.8-18 m/s)
Drive Motor: 23HP (17kW)
Head #3: Longitudinal Sanding Unit
Sanding Belt Speed: 6-60 FPS (1.8-18 m/s)
Drive Motor: 23HP (17kW)
Head #4: Lef Head w/ Internal Pressure Belt
Enhanced Finish Let Head Features an Inner Chevron Belt to Allow for Fine Sanding of Workpiece
Sanding Belt Speed w/o Pressure Belt: 6-60 FPS (1.8-18 m/s)
Sanding Belt Speed w/ Pressure Belt: 6-30 FPS (1.8-9 m/s)
Drive Motor: 23HP (17kW)
Additional Options Included
Workpiece Blasting Device - Rotating Compressed Air Nozzles for Blasting Workpiece Surface
LED Lights on Belt Change Side
Ionization Bar from Above that Helps Reduce Static Charge
Pneumatic Conveyor Belt Cleaning
Dust Extraction: Approx 6000 CFM
Compressed Air: 100 cfm @ 100 psi
Power: 480 Volt, 3 Phase, 60HZ
OPERATING HOURS 145
Heesemann Model MFA Impression 4-Head Wide Belt Sander
