Hi, We are selling our 2004 Brandt KDN 650 edgbander. It is in good working condition. We just upgraded to a new machine. We recently replaced the glue pot with one from Stiles. Feel free to reach out with any questions you may have. Also, i have a couple videos of the machine running before we un-hooked it.
Here are the specs.
•Automatic coil and strip feed magazine
•Hot melt glue system with teflon coated pot and pre-melter
•Integrated line control with no limit switches
•Color LCD display for machine functions (new screen)
•Quick change glue pot with reversible glue roller (new glue pot)
•Digital temperature displays
•3 roll pressure section with pneumatic controls
•Reinforced heavy duty 3mm guillotine
•Double motor end trim unit on linear slide with 15 degree bevel control
•Top and bottom fine trim with insert tooling; program tilting to 25 degrees
•Radius scraping unit with program control
•Buffing unit
•1/2” wood strip capacity
•Min panel length: 6 3/8”
•Min panel width: 2 3/8”
•Max panel thickness: 2 3/16”
•Two feed speeds of 36 and 46 Ft/min
• SER# 0-261-02-9425
•Electrical: 35amps at 230v 3ph
Video of Machine running
