Description
Description
The NK105 machine is composed of a host system and an operation panel. The 3-Axis motion controller integrates the system control card, terminal board and other components into a whole, and is connected to the operation panel through a 15-pin adapter cable. The upper and lower ends of the back of the control box are inlaid with terminals, and the left side contains the USB interface and the DB15 interface. The DB15 interface is connected to the operation panel when it leaves the factory. The USB interface provides users with external USB devices (such as U disks).
The operation panel G3 handel, simple and lightweight, and is connected to the host system through a 15-core adapter cable, which can be separated from the power distribution cabinet and conveniently control the operation of the machine tool. The travel distance is limited only by the length of the patch cord.
