Two station inline moulding sander using a stroke motion

The Profilematic sander has two 1/2 hp heads that drive the sanding pads. The pads are made from cork on the machine and the profile is sanded into the cork then sandpaper is applied to the cork surface to sand the profile. The heads move in a inline oscillation mode along the length of the wood .Both heads both 120 degrees.Up to 4,000 lineal feet sandpaper life.
The 4" wide conveyor belt has a vari drive up to 35 feet per minute. Requires 100 pound air pressure. and 22 volt single phase. We can provide photos upon your request.
Photos available at
https://duckduckgo.com/?q=Profilematic+sander&atb=v314-1&ia=web