Description
This is a well maintained, turn key CNC router
2013 Stinger II 3x4
Comes with the following
Phenolic table top
3 zone Vacuum hold down
Laser cross hairs
Digitizing Probe
Z - axis recoil air assist
Unist - mister with extra coolant
Fast Tool Change
Extended gantry for lathe
3KW motor
3D printed dust booth
Tempest dust collector and 50ft of piping and various connections
Wincnc controller and computer
Computer has a new solid state drive
Brand new wincnc controller in cnc cabinet
Computer, Screen, and accessories
Computer Stand
Wood, plastic, aluminum drops
Full sheets of mdf and spoil board material
2.5" surfacing bit, 1/2 hogger bit, 1/2 compression bit, 1/4 compression bits, 1/4 and 1/8 o- flute bits to cut plastic, non-ferrous metals, wood, and foam
ER-25 collets 1/8, 1/4, 3/8, 1/2
Extra vacuum pump
Extra Brush Kits
Extra y-axis belts
Extra air fans for spindle
Vilmill 3ft x 80ft [Description right from the website]
a substrate laid between the work piece and the vacuum table of a router. Vilmill has an integrated adhesion layer on the top side which is getting activated during the routing process. When vacuum suction is applied, the fiber structure of Vilmill acts as a diffuser and increases the holding power of a vacuum table. The combination of adhesion layer and the vacuumprovides an excellent material holding down even the very small work pieces. After the material is completely processed, the work pieces can easily be removed.
I can provide additional photos and videos
