Description
FOR SALE: 2018 Weinig/Luxscan Combiscan EVO Scanner + Raimann RIP 410 Gang Ripsaw — Complete Package $85,000
Posting a complete rip optimization system — both machines are 2018 vintage, same production era, and were running together. Selling as a package only at $85,000.
---
MACHINE 1: Raimann RIP 410 Gang Ripsaw
- Left-to-right feed configuration
- 410 mm (16.1") cutting width
- 50 HP main saw motor
- QuickFix Hydro-Quick arbor — fast blade changeover, no tools or spacers needed
- 480V / 3-phase / 60Hz
- Made in Germany
MACHINE 2: Weinig/Luxscan Combiscan EVO Lumber Optimization Scanner
- 2018 build year, Made in Luxembourg
- Serial No. 1108.01, Type Rating 12
- Top and bottom scanning configuration (factory customized)
- 8" maximum board width
- 480Y/277V, 3-phase, 60Hz
- 1,400 kg machine weight
- Dual rack-mount industrial processing computers with image acquisition cards
- Rittal TopTherm enclosure cooling unit
- Rexroth IndraDrive servo system, Pilz safety relays, Phoenix Contact power supplies
- Custom infeed section designed for 40" part lengths
---
IMPORTANT — READ BEFORE INQUIRING:
The Combiscan EVO was factory-customized by Weinig/Luxscan for our specific application. Weinig has advised that a software reconfiguration will likely be required for a new owner — they have estimated this at approximately $60,000 depending on the buyer's grade rules and production requirements. I'd strongly recommend contacting Weinig North America directly for a current quote before making an offer. We've priced the package at $85,000 with that cost in mind.
Scanner is top/bottom only — not 4-sided. Max board width is 8". Infeed is designed for 40" parts — verify compatibility with your operation before inquiring.
Ripsaw is left-to-right feed — confirm this works for your facility layout.
---
WHO THIS IS FOR:
This system is a natural fit for flooring mills, moulding and millwork shops, finger-joint lines, or any secondary processing operation running boards 8" and under that wants to automate the rip decision and improve yield. If you're currently doing manual rip grading, this system replaces that labor and pays for itself fast.
Both machines are available for in-person inspection by appointment. Buyer is responsible for all rigging, loading, and freight.
Location: Austin, Texas
Contact: Todd Souers
Phone: 210-906-6521
Email: Todd.Souers@ComalWoodProducts.com
Serious inquiries only please — no brokers.
