Description
we just pulled this from service. was working ok, but we needed a machine with a smaller footprint. 15HP motor was replaced about 6 years ago. there's a separation where the plenum attaches to the fan housing, which can be sealed from the inside with some silicone and a little effort. that happened when we were moving the machine into place earlier this year. we can help the load the machine, preferably onto a flatbed truck or trailer, and if you're local to the richmond area we can provide delivery for a reasonable fee. the filter bags and frame are included, and the flange that's attached is for a 15" diameter pipe, but you can adapt it to whatever size you need. if we still have any of the plastic collection bags, I'll throw those in as well. you can see from the photos we used tip dumpsters underneath so we didn't have to wrestle heavy bags of sawdust. the dumpsters can be also be included, for a reasonable cost. the motor is 3 phase 230/460, currently tapped 460. (36 amps at 230v, 18 amps at 460). Overall dimensions: 42" deep, 14' wide, 15' tall to the top of the filter bags.
