Customer has a very top quality (read heavy and expensive!)embroidery machine. After trying unsuccessfully to work on a standard 6' folding table, her husband asked me to come by and take some measurements, and build her something good.
After accessing her needs, wants and desires, I designed and built this unit. Each side roll out has a solid top to double as a work top, and houses 14 drawers on each side, to inventory the many spools of thread needed per project. The unit is built in four pieces, of solid Black Walnut Raised Panels, solid Hard Maple drawers, roll outs, and a 6/4 Brown Maple Top
Viewer Comments:
Do you need to attach this to the wall so that when both pull out units are out and being used for material holding that it does not tip toward the user? Looks really nice. There are a lot of drawers there.
UHHG! Those side mount slides are so ugly and hide all of your dovetails! Couldn't have made undermounts work?? Other than that, nice job.
The two slide out units do have to be mounted to either the back wall, or the floor.
As for the side mount vs undermount slides....well, uhggg!
