The finished doors in place after installation.
The double doors allow for the entire opening to be cleared when ever desired.
The doors look nice from the inside of the home, when the main doors are opened back.
We started with 66 board feet of rough lumber. Im glad I over ordered as checks and defects caused several pieces to be unuseable.
Running the 5/4 walnut thru the Woodmaster to get it down to the finished thickness of 1
The rails after cutting the tenons on the table saw. We have a router jig for this, but due to the smll number a wide range of tenon widths, the saw was faster.
Checking the fit between the tenon and the mortise size on the small rails.
Checking M & T fit on the large rails too.
After fitting the parts, the glue is applied, clamps are in place for drying.
Attaching the T-Astragal.
Screening the doors and attaching the screen bead. Screening is about the only part I do not enjoy.
