All Listings
Gallery Guidelines
Router Jig for Radius Sanding Blocks
Listing #132 Listed on: 12/15/2014
|
Nothing fancy here - just a Git R Done setup to make some radius sanding blocks for shaping fretboards and dressing frets on a guitar.
I apply self-stick sandpaper (from Stewart McDonald) to the the face - the blocks make life so much easier when working on radius fretboards and dressing radius frets.
The rig is not intended for any sort of production - my
main reason for building it was to make sanding blocks
for the much more severe radius configurations I work with
on the guitars I build.
(No images available for this Shopbuilt Equipment listing.)
|
|
|
|
Viewer Comments:
Posted By:
Jeff [12/31/2014]
It isn't often that I see something on here that makes me take note but your router jig is so applicable in so many ways. Thank you for sharing
Posted By:
Dave Nauman [01/17/2015]
What a great idea.
Posted By:
robert [01/22/2015]
Very clever. Thanks for sharing.
Posted By:
Lukasz kopec [02/15/2015]
Bright idea thanks
Posted By:
Louis [06/21/2016]
This is great. Any chance you have a drawing or dimensions you would be willing to share?
Posted By:
David Bremer [09/28/2018]
could be used for short runs of enormous cove mold
|
|
