Woodworking Business Forum

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Let's talk Take-off Software

1/2/16       
RobertNH  Member

What are you using for .pdf plan take-off software and what do you like or dis-like?

I've sampled several. From free to $3k and can not find one that fits the requirements without paying for extras I will not use.

I currently use PdfExchange Viewer for measurement and mark-up. The only software I found that meets my requirements is PlanSwift, but not at the price they want (I don't require anything more than their measurement tools).

If PdfExchange had continuance in their measurement tools, I believe it would be a great tool!
By continuance, I mean, measure a room of baseboard, move to another and the totaling of length continues. Not 20 different totals that need to be manually added up.

1/3/16       #2: Let's talk Take-off Software ...
Gary B.

Robert,

What is your estimating process? I would look at Bluebeam PDF software. It's pretty sweet for $300.

1/3/16       #3: Let's talk Take-off Software ...
RobertNH  Member

Thank you Gary!
I'm currently looking at BlueBeam.

The interface is different and takes some getting used to.

There are features I like, but;
To date I don't see the continuance of measurement that I'm looking for..

I'm also not getting my 'mark-ups' to stay on the plans.. Probably just me..

The $300 per license is a good value if.. and I haven't gone deep enough into it to know as of yet..
Do you 'own' the program?
Or; Do you have to 're-up' the license annually?
Can you 'sign out/sign-in' on another computer on the same license?

1/3/16       #4: Let's talk Take-off Software ...
RobertNH  Member

To the Process question;

Plans are either send to us Electronically or we Download from the Clients site as .pdf's.

Half the Team, as I do, does the Take-off' digitally, the other half still prints them on the plotter (considering I'm the old guy on the Team, it's funny I'm the one going digital).

Due to the complexity of our Bid's, we've built our own Estimating software in Excel.
So a Take-off program for us does not require the features OST, PlanSwift and many others do for 'Costing's.
Also does not require an Excel interface.

PdfExchange Viewer (free version) comes so close!

1/5/16       #5: Let's talk Take-off Software ...
Mike

Robert, There are tutorials on Bluebeam on You Tube I believe, very powerful in conjunction with a spread sheet.
https://woodproacademy.com/category/shop-drawing-tutorials/

1/5/16       #6: Let's talk Take-off Software ...
RobertNH  Member

Thank you!
The link is private, but I did find one (luck I think) that helped.
Looks like it does total like I require! WHOA!
Also showed me a couple easier ways to get where I need to be.

Now to learn if you own it or lease it.
And if they dis-count for volume licenses.

1/5/16       #7: Let's talk Take-off Software ...
Mike

Robert, I have had it for years and it was only like $200 bucks one time. I also lost it in a hard drive crash once and they hooked me back up NO CHARGE..

1/5/16       #8: Let's talk Take-off Software ...
RobertNH  Member

From what I've learned it does a summary of measurement.
This is 'my' main requirement.

It also seems to have an email feature (which I've yet to master) which will be important as we move remote bidding.

I like that you 'own it'!
This should allow a single license to be used a different locations (something else I'm looking at).

The Interface is a bit complex, but I'm certain once used to, that will be over-come.

It also has 'Bookmarks' (when traveling through a 130 page planset becomes very important).

I'm also seeing a 'Toolbox'.
This should allow custom Take-off items to be added for ease of future bids.

I've yet to Master 'Call-outs' & taking a picture of it to send as an RFI. I'm sure it's there, just haven't found it yet.

The Email interface is also tricky to Master. Once done, it should prove handy.

BlueBeam as has costing's, which I won't use, but there for those that could.

The Excel interface is also something I can not use, but again, for those that can it is there and works fairly well.
I say fairly only because I do not see it entering Excel at a focused cell.
Important to me because I require specific entry.

Overall, I see it as a very good program!
No reason to buy OST/ PlanSwift (could name several more) if you require something lighter.

1/5/16       #9: Let's talk Take-off Software ...
RobertNH  Member

Any others 'we' should look at Folks?

1/14/16       #10: Let's talk Take-off Software ...
Sergey

Website: http://www.costminer.com

Robert, CostMiner (www.costminer.com) may work for you. It has the 'extras', but at $25 a month you probably won't worry about paying for them. You can create a dummy estimate that contains only take-off quantities and then export it to Excel. That will give you the 'continuance'.

CostMiner

1/15/16       #11: Let's talk Take-off Software ...
RobertNH  Member

Sergey, Thank you for the response!

I will look deeper at this and find out a bit more about it.

First look shows me it's a 'lease'.
I would prefer to own.

Comparably, BlueBeam Revu would pay for itself within the year and do almost all this does (short of local values, which can be looked up) and no further cost.

Interesting program and thank you for mentioning it.
I will do a trial and look deeper.

1/25/16       #12: Let's talk Take-off Software ...
RobertNH  Member

This is termed a 'Bump'.

I really wish to hear about more software choices.

My PDF Exchange, if would do continuous measurement, would fit the need.

BlueBeam Revu is next on the list if I could get it for less.

Any other offerings out there?

3/22/16       #13: Let's talk Take-off Software ...
Sergey

Website: http://www.costminer.com

We also released a free TakeOff tool:
http://www.costminer.com/Takeoff/Takeoff.aspx
There is no need to register - just open and use it.

Free Takeoff Tool

3/22/16       #14: Let's talk Take-off Software ...
RobertNH  Member

I looked.. Sergey..

What I suggest to you is to take a look at PdfExchange.
Model yourself after what they offer and take it the next step.
The summary of the items taken off.
This is what I can not get them to do.

In their 'free' version, I can build modules.
4" high base, 6" high base and multiple piece base and choose the color it represents.
This continues to no end of what and how many I can build.

BUT and this is the important part..
There is no totaling of measurements.
I can click to a summary that shows everything I did, by module and total it manually and enter it into Excel (or total it in excel).

That's the step I wish to avoid.

Take a look at PdfExchange and what it offers.
Model yourself to it.
Do the next step they won't.

And you have a product that will sell!

3/22/16       #15: Let's talk Take-off Software ...
Sergey

Thank you, Robert, we will take a look.

3/22/16       #16: Let's talk Take-off Software ...
Sergey

Robert, we added showing the total length and area. Is that what you expected? You will need to press F5 in the browser to see the changes.

Were you referring to the free version of PDF-XChange? I might be missing something, but I found it quite difficult to use the measurement tools for take-off. They do not seem to have undo/redo on segment by segment level, you cannot pan or zoom whilst drawing, and there is no snapping to line ends.

5/31/16       #17: Let's talk Take-off Software ...
Shawn Member

Planswift has excel integration and is by far the best takeoff software I have used. The software is very powerful and cheap when you compare to the high dollar software like OST, and projectpak. 900 bucks pays it self of pretty quickly. There are multiple places in your bid to add this cost and still have it be transparent and keep the bid competitive. One area as an example would be field measurements, submittals and shop drawing allocation portion of the quote. very easy to manipulate that part of the quote. The program can be financed into 4 payments with the maintenance for right at 275 a month. I am currently working on making assemblies that include finished end options, tops with sink cutout options and cabinets with light rail and locks built into them to reduce digitizing a bunch of different items. This would take a run that would require 10 to 20 digitized items in a run to about 4 or 5.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)