Woodworking Business

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

IWF Show

Dennis Member

Website: http://www.letendrewoodworks.com

I just got back from the IWF show and I feet are exhausted. I thought it was a great show and lots to learn. I was impressed with the CNC routers and the software selections. I noticed allot of import products at the show for sure. Still on the fence for a new CNC router but getting close. Nextech showed the best pricing for some great components on their CNC Router.

8/28/16       #2: IWF Show ...
james mcgrew Member

I saw people buying , Made me feel food ! i too stuck my feet in the water for an upgrade !

8/28/16       #3: IWF Show ...
james mcgrew Member

Dang spell check "Made me feel Good" !

Should drink more coffee before posting

8/28/16       #4: IWF Show ...
Dennis Member

Website: http://www.letendrewoodworks.com

Hey Jim,
I did not see you at the show. I spent some time at the Camaster booth and was impressed with the new machine they showed. I am still on the fence for purchase but narrowed my selections down for sure. Great show!

8/28/16       #6: IWF Show ...
james mcgrew Member

The new Edge machine is up there with the rest of them ! my cobras are doing fine, so i went for a new edge bander, it was nice to see some buying going on Saturday, people were at tables signing paper !!

8/28/16       #7: IWF Show ...
Dennis Member

Website: http://www.letendrewoodworks.com

What edgebander did you purchase?

8/28/16       #8: IWF Show ...
james mcgrew Member

I am deciding this week on the brandt (I have two and will sell one) and two others will post soon enough.

8/28/16       #9: IWF Show ...
Andrew J. Coholic  Member

Website: http://www.joecoholiccustomfurniture.com

I figured between the three days I was there with one of my employees, we walked about 45 Km.. close to 9 miles a day. Yup, my feet and calves were sore too.

It was a great show. I wasnt in the market for any big equipment, but a lot of other stuff - new shop carts, power feeder, some tooling, etc. and prob a tiger stop for one of my saws.

Made it back home today - back to work tomorrow with another two years of new ideas and things to ponder until the next one.

Some things I saw two years ago I purchased this show, and I am sure some of the things I saw this past week will sit in the back of my mind until it is time to implement them in the future. Not always about what you want to buy "now", but what you might need to buy "later"... at least for me.

8/28/16       #10: IWF Show ...

I decided to go at last minute. Show was very good, saw some great stuff.
I went specifically to see a machine I had a deposit on. I decided to put that on hold and instead negotiated a great deal on a new nested base with auto load and unload. Saved almost 20k over what I had previously been quoted. (I have a nice Biesse Rover B that I will be putting up for sale for anyone that is interested)
Picked up some other great ideas as well. Coolest thing I saw at the show was the printers that could print on just about anything. The booth backdrop were pallets they had printed directly on. No application whatsoever for my business, just cool.
Lots of machines were sold at that show.

8/29/16       #11: IWF Show ...
Jerry Cunningham

Maybe I've gone to too many IWF's, but I was extremely disappointed in this year's show. It was exactly the same stuff as two years ago, but every booth was even smaller. I remember Weinig used to have every single moulder they made under power and actually making moulding. This time you had to be luck enough to see a moulder you could "lease for only $7697/month"! I was impressed that a LeaderMac moulder that's $60k is much heavier and built better than the 350k Weinig.

It was nice to watch the robots do their routine, but a lot of what on display seemed to be very frivolous to me. Do I really need to pay $150k for a robot to place a panel from one conveyor belt to another? You could accomplish the same task with a gravity roller conveyor for a few hundred dollars.

Makes me think back to how every single article in all the wood magazines is how a CNC saved the woodshop. I wonder if the magazines would still be in business if they only pushed lean articles?

Maybe I wasn't impressed because I only process solid wood. Almost every booth was a panel saw, edgebander, or nested based cnc.

8/29/16       #12: IWF Show ...
Bob Member

I took a couple of guys with me, and we all thought the show was excellent. It was encouraging to see the number of people (both exhibitors and attendees). And, it seemed people were in the buying mode.

Derrek, I'm curious which CNC you ended up buying (and if you're willing to share, what a "great deal" is specifically). We are in the market for one, and any input is appreciated.

8/29/16       #13: IWF Show ...

I have a Rover B, I went with the rover s, 4x8 table with auto load and unload. I had been previously quoted on the machine at 144k and was able to get it for under 130k plus a 2500 credit for tooling.
Im very satisfied with my current machine, I went with the. New one to simplify the process in my shop. The unloading after sheet was run was taking way to long, now we are 45 seconds between sheets.

As for the robots, the prices are coming down and minimum wage is going up. I saw a smaller one that could run uncaged for about 50k. Yes be smart, if you can use a gravity roller do it, but automation will be the future as costs continue to come down.

8/29/16       #14: IWF Show ...
Gary B.


"I saw a smaller one that could run uncaged for about 50k". That's interesting. Do you remember the name of it?

8/29/16       #15: IWF Show ...
Pat Gilbert

What does un caged mean?

8/29/16       #16: IWF Show ...

I dont remeber the name, they were in the B building in the 5000 aisles, I think.

Uncaged means they don't need a safety fence around them. They have sensors on them that can tell when they are contacting something and stop. Some also have eyes and can see obstacles in the path of travel. This type of robot can work side by side with humans and not kill them if they get in the way.

8/29/16       #17: IWF Show ...

Cobots, or collaborative robots, are a pretty hot segment of automation.

Unlike traditional robots, there is no normal safety barrier (fencing, gated access). Some use machine vision, photocells, or contact pads to minimize contact with people. The units are very sensitive to force feedback, and will halt if any reasonable contact is encountered.

Usually they are essentially a "3rd hand" to handle the more hazardous parts handling or machining. They generally work in close proximity to people that are working with them.

8/29/16       #18: IWF Show ...
Pat Gilbert

Hi Blaine

How's about giving us your Ray Kurzweil of robots and the woodworking industry?


8/30/16       #19: IWF Show ...

Ray is a bit further along than I am...;)

Full disclosure is that I many years of experience in standard production robotics (primarily pick and place, CNC) and I have only investigated and done the legwork to have a couple of cobots installed, both outside of the wood industry.

That having been said, having robots that don't require isolation from a human workforce offer some significant advantages in cost and operational flexibility.

My opinion is as follows...

Pros: There is better utilization of space since a isolation area is not required.
Materials handling can be simplified because a isolation area is not required.
Higher risk portions of task(s) can be done by cobots.
Complete tasks can be done by working in conjunction with cobots.
Cobots can also do complete jobs as standard robots .
Programming flexibility is much better that standard robots. They are less complicated to program in part due to not having to secure the working envelope.
Multiple robots can be used more easily in a single cell. For example, one can pick up a part and hold it, while another performs a machining operation.
Some can inspect their own work.
Most cobots will likely be re-purposed several times because of their flexibility and ease of implementation.
My opinion is that cleaning tasks in occupied areas will be done by cobots while the human element is on breaks or off shift.
If implemented correctly, cobots can increase productivity of a job or task by a factor of 3 or more.
Repetitive motion injuries can be minimized or eliminated, particularly back and hand.
Contact injuries can be minimized or eliminated.
All of the above reasons allow for much faster adoption of robotics technology in the workplace. ROI, safety improvements, injury reduction, and flexibility.

Working with cobots is not an unskilled position to be 100% successful.
Training and understanding is paramount. This cannot be overstated.
Maintenance is required and critical for uptime.
Consistency is critical with perishable tooling and tooling changes/setups.

8/30/16       #20: IWF Show ...
Pat Gilbert

Thanks Blaine,

What is a minimum quantity run for the cobot to pencil out?

As bad as the labor shortage is it is going to get a lot worse.

View higher quality, full size image (759 X 640)

8/30/16       #21: IWF Show ...

Hi Pat,

The answers is, as it is all too often is, it depends.

If the cobot with installation cost $50,000, you still have to cover implementation cost, training, and putting a new or different process in place. There is a learning curve to get started, although it is much smaller that with a standard robot.

$75,000 in labor savings, increased productivity, employee engagement, will easily pay for the cobot automation in a year most of the time. PR for your company, young workers are often enamored by robots, sometimes they are just the right thing to get them interested in manufacturing. The idea is to make money, not beak even. That is why I use 1.5 times the price of the equipment.

Contributing factors to improve justification of a cobot:

If OSHA is investigating a claim, and using a cobot is part of the corrective action.

If you can minimize overtime or eliminate a shift.

Tax credits.

In all cases you need to have the technical expertise available to support and maintain the application(s). There is a learning curve. This can be internal or external, but is imperitive.

The support personnel and the operator are not minimum wage positions. Don't think that they are, and you will save yourself a lot of heart burn.

Sorry I can't provide an answer like .68 units of .75 white melamine per week, but there are just too many variables.

8/31/16       #22: IWF Show ...
Gary Balcom Member

Website: http://www.Atlantacabinet.com

Can you post a link where I can learn more? I goggled Cobots, and only came up with "Baxter", which is cool, but not sure if he would handle cabinet size parts.

8/31/16       #23: IWF Show ...

Hi Gary.

Try youtube, probably the largest volume of information regarding cobots at this time.

The payloads are not that high in most cases, because in order to work with higher payloads, the speed must come down to stay within safe stopping distances and times.

9/1/16       #24: IWF Show ...

This is the cobot that was at the show

9/14/16       #25: IWF Show ...

The robot @ the SCM automation line was quoted as $52K. It required a fence. That did not include end handling or software. Many companies are now introducing robots that do not need fencing. They are slower currently so that's the trade.
At the show the hot newer item was the panel handling gantries. I can see a use for them in larger shops. Prices ranged up from $100K.

10/16/16       #26: IWF Show ...

Heartless Carpenters


  • Post a Response to this thread
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)