Professional Finishing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Fiberglass and Aluminum

Barry Golash

I have a fiberglass and aluminum industrial electronics panel box to finish. I was going to use Clawlock and the Resistant to finish
the box. Campbell informed me that they only test on wood.
Does anyone know if the campbell products will work. If not can you recommend a finishing product.


12/11/14       #2: Fiberglass and Aluminum ...

go to a car paint supply store.

12/11/14       #3: Fiberglass and Aluminum ...
Jim Clark  Member


Auto epoxy primer is the best choice

12/11/14       #4: Fiberglass and Aluminum ...

PPG's "Breakthrough" might be what you're looking drying WB for an array of substrates including fiberglass and aluminum (although aluminum requires priming first). It has very good adhesion and blocking for a WB.
I used some the other day for 18 display pedestals used to display furniture...painted them on a Tuesday, set the furniture (dinettes, couches, benches ect...) on them Thursday evening and no sticking.

12/14/14       #5: Fiberglass and Aluminum ...
Paul Snyder  Member



Acid catalyzed finishes (e.g., pre-cat and CV) do not work with metals. And some finishes that are advertised to work with aluminum do not perform very well.

I like Jim Clark's recommendation to use an epoxy primer. Instead of automotive brands, I use a LOT of the Matthews catalyzed polyurethane products marketed to exterior sign makers (see link below). Their high build PT filler primer works great on aluminum as well as the epoxy. But the epoxy primer is more versatile and works with a much wider range of substrates. The epoxy primer needs at least 2 hours before you can sand it.

Make sure you read and follow the tech data sheets for any of these products and adhere to the same safety precautions you would use for any 2KPU.

FYI - for MDF, especially glued-up layers with exposed edges that need a lot of filling, the polyester primer does a great job - very high build - but very short open time once mixed.

Matthews 2KPU - great on metal or wood

12/14/14       #6: Fiberglass and Aluminum ...
Mark V.


I have sprayed many radiator covers with aluminum grills, which have been random orbit sanded and de-greased, with acid catalyzed finishes. I have several in my own home that are 3-5 years old, and have noticed no issues. The finishes were from Conestoga (Valspar and now Sherwin Williams) white catalyzed “paint” with CV topcoats.

Is there any reason that I should be concerned?


12/14/14       #7: Fiberglass and Aluminum ...
Paul Snyder  Member



The main concerns using acid catalyzed finishes on metal are discoloration and poor adhesion. It sounds like your finish is performing well - which is lucky. Some acids and resins do much better than others....

Always read and follow the tech data sheet for the products you're using to avoid potential problems.

With aluminum I've learned to do both short term and long term adhesion testing of both coatings and adhesives. Some seem to work well initially, but after several weeks or months start to fail.

12/15/14       #8: Fiberglass and Aluminum ...
Mark V.

Thanks Paul,

I’ve had no issues with discoloration and in all cases the finish has been white on the aluminum radiator grill, solid wood and MDF that was used to fabricate the covers.

I carefully prepared the aluminum with sanding and de-greasing and I am sure that this has led to superior adhesion. The only place I can say that I have had a slight issue is where my daughter made a very sharp crease/dent in the grill. When I flattened it back out I got some cracking of the finish, but no flaking. I assumed that most finishes would have done the same.


  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)