Location:
Snead, AL

Condition:
Very Good

Phone: 205-373-1130

Name: Stone Auctioneers & Appraisers
Weblink: www.stoneauctioneers.com

This auction includes:

Machinery and Equipment
Snead, AL

CNC PANEL SAWS:
Holzma Model HPL-380/43/16 Optimat Panel Saw, 16’ cut. Cap., 3.75” Blade Projection, 0-150m/min, 18 HP, Rear Load, 6 Grippers, Pushers, 10’ Rear Cap., 5’ X 12’ Right & Left Hand Infeed Powered Case Rolls, 5’ X 16’ Powered Case Rolls w/ Lift, (4) 24” X 72” Front Air Tables, Ergomat Off-Bearing & Stacking System w/ (1) 16” X 84” and (1) 16” X 108” Air Table, (2) 36” X 64” Roller Top Scissor Lifts, Pneumatic, Adjustable Back Stop, Power Control w/ 12” X 9” Screen & Zebra 24 MT Label Printer, S/N 0-240-15-3039, 2004

Holzma Model HPP81/3800/Top Front Load Panel Saw, 12’ Cut Cap., 3.35” Blade Projection, 0-230 FPM, 18 HP, 3-26” X 84” Front Air Float Tables, 6 Material Grippers, Optimat Control, Rear Support Chains, Side Guide, 4-1/2” Thickness Cap. S/N 0-240-06-2949, 1999

Holzma HPP81/42/Top Front Load Panel Saw, 12’ Cut Cap., 3.35” Blade Projection, 0-230 FPM, 18 HP, 3-26” X 84” Front Air Float Tables, 6 Material Grippers, Optimat Control, Rear Support Chains, Side Guide, 4-1/2” Thickness Cap. S/N 0-240-06-2119, 1997

Antec Model P-3200TM Panel Saw, 10’ Cap., 10HP, 1 HP Scoring Motor, Digital Readout for RPM & Tilt Angles, 4-Speed, 3,000-6,000 RPM., 59” Rip Cap., S/N 96C06140, 2007

CNC MEMBRANE PRESS:
Shaw Almex ThermoLaminator Membrane Press, Model TL-4-4-120 ST, 70
PSI Max Pressure, (2) 50” X 144” Shuttle Tables/Platens on Hydraulic Lift Tables, (2) 4” X 50” Openings, (3) Aluminum 50” x 144” Platens, Allen Bradley Panel View 550 Control Console, S/N A998-134, 1998

VACCUM PRESS:
Greco Vacuum Press, 7’ X 9’ cap., 1 ½ HP Vacuum Pump, Hinged Lid, Complete Control Panel

CNC MACHINING CENTERS:
Busellato Model Optima CNC Machining Center, 36” X 108” Cap., (6) Moving Bridges w/ (2) Pods per Bench, 8-Position Tool Changer, 7.5 KW Router Motor, 7 Spindle Front to back, 4 Horizontal Spindles, 2 Double spindle, (2) Spindles in “Y”, (14) Vertical Spindles in “X”, 6.9 KW 2nd router spindle, (6) IS0-30 Tool Holders, Busch-type RC-0100 Vacuum Pump, 3 KW, S/N 4446, 1999

Weeke Mdl BHC Optimat 350-S2 CNC Machining Center, 48” X 144” Cap., (6) Movable Benches w/ (4) pods each, 10 HP, Nash-Elmo Type 2BL2101- 2AH 50-4A-Z 3.5 KW Vacuum Pump, (2)Sets 15+ 9 Vertical Line Drills, (2) Sets Dbl Spindle Hor. Drills, Trim/Groove Saw, Tool Set-Up Stand, S/N 0-250-17-0605, 2004

Northwood Model 85 NT CNC Machining Center, 5’ X 8’ Cap., (2) Rear & (2) Side Pin Stops, ES-919, 10HP Electro Spindle, (8) Vertical Drills in “Y”, (5) in “X”, 8-Position Bar-Type Tool Changer, (8) IS0-30 Tool Holders, Siemens Sinumerlk 8100 Controller & Hand Held Control, (2) 4’ X 8’ Ball Roller Tables , Travini Dynaseal 40 HP Vacuum Pump, S/N 018, 2002

CNC EDGE BANDER:
IMA Mdl Compact PC/F/DV/6220 Single Side Edge Bander, ¾” Thickness Cap., Pre-Mill Station, Pre-Melt Gluer, (1) 4” Driven Pressure Roll, (4) 2 ½” Idle Pressure Rolls, Dual Motor End Trims, Single Station Top/Bottom Trims, 2 Motor Corner Rounding, Scrape, Top/Bottom Buffing Station, Smoothing Luster Station, Variable Feed Speed, S/N 07066, 1997

DOOR MACHINE:
Unique Model 250 Door Machine, 7.5 HP Drive Motor, 1 ¼” Dia. Spindle, 60” X 12” Table w/ 40” max. stroke, Pneumatic Clamp, Dust Hood and Control Panel, S/N 115303025

COPING MACHINE:
Unique Mdl 265-2 Coping Machine, 2-Position, 3HP, Pneumatic Clamp, 1 ¼” Spindle, 12 ¾” X 18” Table, 9” Max. Travel, SN 07370402650

BELT SANDERS:
Butfering Model SBS 209-RL Super Belt Sander, 2-Head, 36” Wide, w/ Steel Contact Drum, 2” Wide Polishing Platen, S/N 69010, 2002

Sander King I, Model NW-36K Belt Sander, 1 Head, 37” Wide, w/ 4” dia. Contact Drum and 2” Polishing Platen, 20 HP Drive Motor, 1 ½ HP Variable Feed Drive, Ammeter, Drum Brake, 60” Abrasive Belt Cap., Electronic Tracking, Machine No. 212228, 1988

SPINDLE SHAPERS:
Northtech Mdl NT-101-53 Spindle Shaper, 5 HP, 1 ¼” Dia. Spindle, 27 ½” X 32” Table, Dust Hood, Adj. Fence, Reversing Switch, w/ Maggi Mdl 2034 Power Feed, 3-Roll, 4-Speed, w/ Stand, 1 HP, S/N030213, 2003

Grizzly Model G-1026 Single Spindle Shaper, 3 HP, ¾” Dia., Spindle, 3” Spindle Travel, 28” X 30 ½” Cast Iron Table with Miter Slot, 7000 & 10,000 RPM Spindle Speeds, S/N 744638, 2007

BORER/INSERTER:
Titus 1144 Hinge Borer and Inserter, 1.5 HP, Set-Up for Hafele or Salice Hinge, S/N 117, 2008

Unique Mdl 71 Pocket Boring Machine, 2-Spindle, 1 ½ HP, 23” X 43” Table, Manual Holddown, 1 ¼” Drill cc., (2) Side Guides, S/N 0102000350

PLANER:
Invicta Mdl DGI-63 Single Planer, 24” cap., 12 HP, (4) Knife Straight Head, ¾ HP Motorized Knife Grinding Attachment, S/N 1424, 1999

Worx Model LS-20H Single Planer, 20” cap., 7.5 HP, Helical Insert Head, Dust Hood, Sectional Feed Roll, Manual Raise and Lower, S/N 060281

FRAME ASSEMBLY TABLE:
Unique Model 280 Face Frame Assembly Table , 48” X 144” Table, w/ (4) Pneumatic Clamps and Overhead Bridge, S/N 012000261

CLAMPING:
Doucet Model SRH-12-8 ½-72 Hydraulic Rotation and Tightening Clamp Carrier with (72) 3” X 37” Clamps, Flattener is Pneumatic, w/ Hydraulic Pump, SN UK

Uhling HP-5000 Case Clamp, Motorized, 84” W X 48” H, 3 side and 3 Vert Pressure Shoes, S/N 1024

Unique Model 80 Frame Clamping Table, 48” X 94” Cap., 6-Pneumatic Clamps, Foot Actuated, S/N 0797030280

CNC DOWEL MACHINE:
Accusystems Mdl HPJ-7 CNC Dowel Boring and Injection Machine, Single Spindle, 49” X 16” Table, (4) Pneumatic Vertical & Horizontal Holddowns, Automatic Feed Dowel Hopper, HI-Freq, Aro Glue or Water Injection Pump with 1 ½ gal. Reservoir, 12” X 9” touch screen. S/N 022-07-HPJ-7

PNEUMATIC CUT-OFF SAW:
Whirlwind Model 1000-LH Pneumatic Cut-Off Saw, 2” X 8” Cut cap., 5HP, Saw Guard and Clamp, Foot Petal, S/N 84904207L, w/ Tiger Stop, 10’ cap., PB Controller, Pusher, S/N CO4176176

Laurerdale Model RH Pneumatic Cut-Off Saw, 10 HP Motor, Starter, Foot Pedal

Pistorius Model 18UC-P RH Pneumatic Cut-Off Saw, 5 HP Motor, saw guard, 18” blade cap., S/N 76794

SANDING:
Powermatic Model 013 Non-Oscillating Tilting Edge Sander, 6” cap., 6” X 80” Belt, 10” X 29 ½” Main Table, 10” X 12” End Table, 1 ½ HP, S/N 96130054

(2) Quality Mill Down Draft Sanding Tables, 4’ x 8’

STRAPPING MACHINE:
StraPack Model RQ8 Automatic Strapping Machine, Feed Thru Tunnel 48” Wide X 46” High, S/N 07013248108, 2008

MISCELLANEOUS DRILLS:
Kreg Pocket Drill, Single Spindle, Airbor, Manual Pull, Pneumatic Clamp, Sioux air motor

Ritter Model R-113 Vertical Line Drill, 13 Spindle w/ ¾ HP, Manual Pull w/ 2 Pin Stops, 60” Back Fence, 20” X 48” Table, Floor Model, S/N UK

MISCELLANEOUS SAWS:
Top Model 450 Radial Arm Saw, 16” cap., 16” Cross cut cap., 5 HP Arbor, 16” Saw Guard

Powermatic Model 72A Tilt Arbor Table Saw, 12” cap., 7.5 HP Arbor , 48” X 38” Cast Iron Table w/ Dual Miter Slots, Miter Gauge, 52” Biesemeyer Fence, S/N 9474132, 1994

Braden Model QT60-3 Countertop Saw, 60” cut length, 5” thickness cap., 3 HP, hand crank travel, 16” dia. blade, S/N 87-141

Chambon Model TSCF-284-285 Sliding Table Saw, 10’ cap., 6-speed arbor, 7.5 KW Saw Motor, 126” long table

Dewalt Model GE Radial Arm Saw, 16” cap., 20” Crosscut Cap., 5 HP Saw Motor, Starter, S/N 292979

Porter Cable Mdl 380T Compound Slide Miter Saw, 10” cap. with/Ct Blade

PAINT BOOTHS:
Paint Spray Booth, Auto Type, 16’ wide X 28 ’deep X 10’ high, Overhead Filter Unit, 8 lights, Top & Rear Exhaust, 2 Graco Falcon Pumps, 1 Pressure Pot, 2 spray guns

Paint Spray Booth, 5’ deep X 8’ wide x 7’ high, dry filter, approx. 5HP Fan Motor, 20” dia., exhaust

DUST COLLECTION:
Dantherm Dust Collection System consisting of 60HP Fan Motor, Approx. 38” Dia. Inlet, Powered Rotary Air Lock, 16’ Bag Filter, Separate Shaker Motor, Truck Stand, Piping, Return Air System

Worx Portable Dust Collector, Model CT-201, 3HP, 2 Bag Up, 2 Bag Down, (3) 4” Dia., Outlets, Starter, S/N 043026

Delta Model AP-400 Dust Collector, 1 HP, 1 Bag Up, 1 bag down, 400 CFM

AIR COMPRESSORS:
Atlas-Copco Model GX-30 Rotary Screw Compressor, 40 HP, Built -in Air Dryer, 8547 Hours, including 200 gal Air Tank, 200 PSI, S/N A-11505137, 2005

(2) Ingersol Rand Model UP6-20-125 Rotary Screw Compressors, 25 HP

FORKLIFTS:
Kal-Mar Model P-80-CXPS Forklift, 7,700 lb. cap. Dual Pneumatic Tires, LP Gas, 3-Stage Mast, 48” Forks, S/N 103406A

Nissan Model PJ-02A25 PV Forklift, 4,000 lb. cap., Hard Tire, LP Gas, Side Shift, 3- Stage Mast, 60” Long forks, S/N PJ-02-9H0881

Hyster Model S-50E Forklift, 5,000 lb. cap., Hard Tire, LP Gas, Side Shift, 2-Stage Mast , 42” Forks S/N D002D09234

Yale Model DP060TENUABO86 Forklift, 6,000 lb. cap., All Terrain Tire, Diesel, Side Shift, 3-Stage Mast, 48” Forks, S/N N51212816

Hyster Model S-40XMS Forklift, 4,000 lb. cap., Hard Tire, LP Gas, Side Shift, 42” Forks, S/N C010H06831X

DUMPABLE BINS:
Aurora Type Dump Hopper, Appx. 3 Yard

Aurora Model 2D 135 Dump, Hopper, ½ Yard

CAMPER:
Collins Camper, Mdl C37RK, 20,000 lb. GVWR, VIN 4H33V3732VA000083

MISCELLANEOUS:
Hyd. Loading Dock, 6’ x8’, 5,000 lb. cap.
Lg. Inventory Cabinet Hardware- Hinges & Glides
Lg. Inventory Paint & Finishes
Lg. Inventory Cabinet Component Part & Completed Cabinets
Laminate Inventory
Trim
Countertops
Boxes & Packing Materials
Office Furniture
Work Benches
Warehouse Carts
Warehouse Racking
Hand Trucks
Pallet Jacks
Duct Lifts
Shop Fans


Events Calendar || WOODWEB's Main Page Categories for this entry: