Furniture Making Forum

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

what kind of wood is this?

12/2/18       
moe

considering buying this coffee table but would like to find out more about this type of wood. its type and whether or not its a good material for furniture.


View higher quality, full size image (1242 X 1236)


View higher quality, full size image (1242 X 1231)

12/3/18       #3: what kind of wood is this? ...
David R Sochar  Member

"Cookies" or Rounds" are slices out of the vertical tree. As such, they shrink as they dry. The manner they shrink - or dry out - makes cracks inevitable.

Many novice woodworkers see these and jump on them as easy and attractive tables. When they crack - and they will crack - no one knows what to do. Until they dry out completely (1 year per inch of thickness), there is not much that can be done to prevent cracks.

Depending upon when the 'table' was made - cut, dried, sanded and finished - will help you predict whether it will stay as it is today. I would insist on photos dated today if it is not local to you.

Species? Looks like Walnut, but so do many other trees in this form. Seller should know - it is fundamental.

By the way, a round with several cracks will still, miraculously, hold drink glasses, magazines, phones and bongs perfectly, despite the cracks.

12/3/18       #4: what kind of wood is this? ...
Jim Clark  Member

Looks like walnut to me.

12/4/18       #5: what kind of wood is this? ...
Bryan "doc" Henderson  Member

Looks nice, may be walnut. The center pith area looks lighter down "in the hole". So it may just be walnut stained. Walnut in a cookie may be more forgiving than say oak. I would ask about the whole process, including did they use PEG or denatured alcohol to aid in drying without as many cracks. The hole in the center may help reduce the stress and cracking. You could get a pin-less moisture meter and check content although you need to know species to set meter. If moisture is high, this thing may break in half. You could joint the edges and glue back together. If you are a woodworker, you may just accept that this project may evolve over years with some repair. I made my wife a maple stump coffee table cross cut. I cut relief on the bottom and after 2 years in the house, I am ready to pour resin to the cracks originating from the pith. Rustic. i will ass pics later

12/4/18       #6: what kind of wood is this? ...
Bryan "doc" Henderson  Member

ooops! add. hahaha

12/4/18       #7: what kind of wood is this? ...
Bryan "doc" Henderson  Member

The nice picture is a couple years ago. The goal finish with resin in the cracks shows after about three years of drying.


View higher quality, full size image (4032 X 3024)


View higher quality, full size image (2048 X 1536)

12/4/18       #8: what kind of wood is this? ...
Bryan "doc" Henderson  Member

Another shot of the coffee table. I kept hoping it would stay like that but of course it did not. The other cookies are wall that cookies soaked in denatured alcohol overnight and then dried in a box. Used for rustic centerpieces of course they’re only about 12 inches across. The coffee table is about 4 feet across.


View higher quality, full size image (1536 X 2048)


View higher quality, full size image (4032 X 3024)


View higher quality, full size image (4032 X 3024)

12/4/18       #9: what kind of wood is this? ...
Bryan "doc" Henderson  Member

sorry, sent the pics from my phone. The small cookies are walnut. In the pic it is finished with satin spar poly. we did not like that finish, so went with danish oil that left the end grain dull and natural. Good luck!

12/4/18       #10: what kind of wood is this? ...
Bryan "doc" Henderson  Member

Final thoughts. The outer edge looks foe distressed. the wood on the floor makes me think it was just finished. May have been produced by more of an artist than a craftsman. If you are spending a ton of money, it may look very different a year from now. Some folks will glue the cookie to plywood to help keep it together.

12/7/18       #11: what kind of wood is this? ...
Larry

The wood hasn't got enough cracks to be fully dry, unless it was treated with Polyethylene glycol (PEG) 1000. Some finishes will get sticky months later if used over PEG. The "bark" doesn't look like walnut, may have been manipulated as the bark is prone to falling off as the wood dries. Know what you are buying!

1/13/19       #12: what kind of wood is this? ...
Rajan jangir Member

Website: http://www.rajhandicraft.com

Well to be honest and frank i am not very much aware about this kind of wood but i will prefer you to read about rosewood and furniture made from rosewood. I mostly prefer it because it is 100% termite free and solid wood .

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)