Adhesives Forum

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)


RobertNH  Member

We've just started trying this product. I do see some of you are using.

Curious what you have found. And the applications you use it in.
This stuffs not cheap, but so far passing our tests.

I will say, from our tests, it works better 'without' the activator.

What do you all say about this 2P-10??

2/11/17       #2: P2-10 ...
Leo G Member

Great glue for specific purposes. My most frequent use for it is as a clamp for miters. The glue is brittle and if you drop your glued items it can snap apart.

I use the activator on one pc and put a drop on either end of the miter and then lightly apply TBII around the perimeter of the joint. I squeeze them together until it cures and then set it aside for the yellow glue to cure. Now you have a good strong joint that won't easily fracture.

I also use it as a quick filler for splits in wood and veneers as long as it's getting painted.

2/12/17       #3: P2-10 ...
Mark Member

I recently had a project to do some 1/8" inlay strips in some interior doors where the inlays ran full length and width of the doors. The inlays were somewhere like 8-10" from the edges of the door so clamping was an issue. I used the 2P-10 adhesive and it worked like a charm. Anytime we need to quickly attach a piece (especially for jigs) it's great...

2/17/17       #4: P2-10 ...
Bruce H

I use it for a whole host of things. One of them is gluing sub counters in the shop. I can easily put a four foot return on a top. Put some plastic on the bench so it won't stick, slather the joint and clamp. Spray activate on the surface, wait a bit, lift and spray the underside. Wait a few minutes and then process like one piece.

I might need a longer piece of lumber, cut a scarf joint, apply glue, clamp and spray with activate. It isn't instant set you need to wait.

A week ago I glued the same piece three times. After cutting a scarf joint on each end of an eight foot and ten foot 2x4, slathered with P210, clamped then activated the joint. I was able to pick it up without falling apart but when it went thru the molder only the outside surface had cured so it fell apart when the surface was cut off. Need to wait a little longer.

As for expense? How fast do you want to go? Wish we weren’t always in a hurry but it's the way it is...

2/22/17       #5: P2-10 ...
door shop guy

I like the Titebond version a little better and the new Titebond aerosol activator cans are smaller and easier to carry around. But i do still use the 2P10 also.
My main uses are repairing hairline cracks,splits and stabilizing knots in rustic alder. I mainly use the Thin.
The small disposable tips from fastcap are really nice.

3/4/17       #6: P2-10 ...
RobertNH  Member

The titebond version I hadn't seen before.
Seems to be restrictive in use..

Do you find it that way?

3/4/17       #7: P2-10 ...
door shop guy

Not sure what you mean by restrictive in use.

3/5/17       #8: P2-10 ...
JR Rutter Member


I use the thin to stabilize punky wood, incl soft knots in alder. It wicks into hairline cracks nicely, and if you spray activate the outside faces, you can feed it into the end grain without it making a big mess.

I mix sander dust with the thick and use it for small defect repair. I use powdered dyes to tint the dust and keep a few containers under the bench ready to mix. For most woods, going a shade darker looks pretty natural, like a pitch pocket in cherry.

And use the thick for jigs all the time with activator on one part and a bead of glue on the other.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)