Architectural Woodworking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: Engineered Stiles out of Accoya

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

Engineered Stiles out of Accoya

3/1/20       
Gary

Has anyone made engineered exterior door stiles & rails out of Accoya ? I have had great results using it for gates and exterior balustrades.

3/1/20       #2: Engineered Stiles out of Accoya ...
Tyler

Whats engineered mean?
We have a few doors in bad exposures made with solid accoya that look good 4 years later. Have not been using it for longer than that.
Only Problem i have had with accoya is the checking within the lumber that can appear later in the milling process and the availability of it. I purchase it through Rex

3/2/20       #3: Engineered Stiles out of Accoya ...
David R Sochar Member

"Engineered" is a meaningless marketing term invented by the plastic/metal door industry to denigrate wood doors while elevating the fake wood doors with buzzwords like 'engineered". Add it up over the years, and I'll guarantee there is far more "engineering" in solid wood door stiles than there is in composite wood stiles.

Tell me, who is the engineer? What calculations did he do to make the stiles? How do those calculations help make a better door?

I have wanted to try Accoya, but can't seem to find a wholesaler/retailer to sell it to me. I can't even get pricing.

If I could, I'd build 3 doors - one in pattern grade Honduras, one in Accoya and one in Thermally Modified wood. Then, I'd watch.

3/2/20       #4: Engineered Stiles out of Accoya ...
Gary

I picked up the term "Engineered" from this forum; not sure of its origin. Stave core is more accurate but I thought most people would be more familiar with engineered. I build my gates out of solid Accoya which is flatsawn. I would prefer to have the flatsawn turned 90 degrees so it becomes more ridgid lengthwise ( as in V/G Fir) Thus the desire for the stave core application. Doors have been built this way starting in England around 1911. The only difference was that they would mill teeth into the stave faces and also corresponding teeth into the backside of the skin faces so they would interlock when glued and clamped. They considered them to be of Premium quality.

3/2/20       #5: Engineered Stiles out of Accoya ...
John Member

I've built a few exterior doors with stave core construction. I see why you would consider Accoya for the core because of it's very low seasonal expansion. I used LVL for a couple of stave cores for the same reason.. They worked fine for the stiles but the outside veneer on two of them with 12" bottom rails split right in the middle. I think it's because the LVL has so much lower seasonal expansion/contraction than the 3/16 - 1/4" veneer glued to it. The split in one with Sapele is so small that I didn't need to repair it. That door faces West and gets direct sun, rain, etc. The other with white oak veneer was very noticeable so I replaced it (not an easy task) with a poplar core and have had no further trouble with it. It didn't help that the door faces directly south and gets direct sun on the lower half.

From then on I've used wood stave cores, white oak, poplar, white ash. I finger joint a piece of whatever the outside species is to the ends of the staves. The exposed edges of the core get a 7/8" thick piece of show wood, too. No more troubles but the oldest is only about 5 years, not 5 centuries.

John

3/2/20       #6: Engineered Stiles out of Accoya ...
Gary

I typically stay away from LVL for exterior doors; they just don't like moisture. I had a similar experience with cracking and cupping. I always make my stave cores out of the same species as the face veneer to keep the potential movement the same. David: are you finding Pattern/Genuine Mahogany easy to find where you are ?
I am considering purchasing some in Louisiana and shipping it to so Cal. There is basically none available here.

3/3/20       #7: Engineered Stiles out of Accoya ...
David R Sochar Member

Gary - Yes, stave core is the better term, I feel. With those older English door stiles, how thick were the faces with the milled teeth on the back? I can see how that would increase glue surface. Always a desirable result.

I have used pattern grade Honduras from the same vendor, my favorite, for 50 years - Charles F Shiels & Co. Not many of their customers are still using it, but they still buy on the docks in Louisiana and dry it themselves. It is expensive and still not coming from Brazil. Most of what we see now is from Peru. The drawback is a wider palette of 'normal' color.

I have found that South facing doors do not get the same intensity of solar radiation that West and East facing doors get. This is due to the angle of the sun in the Southern sky. It hits the door at an angle, and this angle is not as detrimental as when the sun strikes the door directly, close to 90 degrees from the surface. We have replaced panels in East and West facing doors, but none on the South exposure. The replacements were necessitated by TBIII glue failure.

3/3/20       #8: Engineered Stiles out of Accoya ...
AM

engineered: skillfully and deliberately arranged rather than arising naturally or spontaneously.

You can engineer a good meal, you can engineer a coup d'etat, you can engineer a door stile. Just saying!

LVL is compressed under extreme pressure, any slight humidity change will cause those fibers to expand and result in split veneers. Many production companies using lvl will have a small thin layer of a melamine product between that and the veneer to prevent splitting. Also most of those doors are narrow stile patio type doors. We have access to accoya but have yet tried to glue up one in a stave or engineered type core, on the list to do. Makes great exterior soffit material!!

3/4/20       #9: Engineered Stiles out of Accoya ...
Adam

Theoretically, LVL manufactured perfectly with the correct amount of force would have exactly the same coefficient of contraction/expansion due to moisture as the same piece of solid wood. Pine will move way more than your saeple.

As Gary & Am noted it’s been compressed and isn’t some perfect piece of lumber. Go on a job site and look at an LVL. It’s not the same as the stock we buy for doors, but it’s not really different.

3/4/20       #10: Engineered Stiles out of Accoya ...
John Member

Was your comment to me Adam? Sapele has a dimensional change of 4.8% radially, exactly the same as white ash. Yellow poplar is 4.6%, white oak is 5.6%, eastern white pine is 2.1%, while Ponderosa pine is 3.9%. I'm not sure what LVL is at the moment, but since I switched to yellow poplar and white ash I've had no more problems with Sapele in stave core construction.
Most of the doors I've made have a different veneer on the inside and outside which is why I've used stave core rather than solid wood construction.

John

4/8/20       #11: Engineered Stiles out of Accoya ...
Craig Caughlan Member

Website: wetimber.mx

The times we've used Accoya for exterior door/facade applications, we've never applied a face ply. We laminate, mill and use Klima or Milesi for tinting and top-coating.

The attached photo is a job we completed about nine months ago: 150 folding doors, 1m wide x 3m tall. The stiles were of three laminations, finished to 60x90mm. Adhesive was Aerodux resorcinol.

Re adhesive, we've since gone to a Franklin product: Advantage EP-950A as it's more user friendly.


View higher quality, full size image (1024 X 768)

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Doucet Machinery
    Sponsors

    Become a Sponsor today!