Architectural Woodworking Forum

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Wooden sink

6/17/19       
Mike

Have any of you ever made one?

What do you use as a finish? Obviously boats have been made out of wood for centuries, but I believe they used fiberglass. Iím not thinking that would be a finish of choice to do on a kitchen sink.

Iím wondering if polyester would be strong enough and Iím guessing some type of two part glue would need to be used.

Tx ahead of time!

6/18/19       #2: Wooden sink ...
Tom Gardiner

The short answer is do not do this. Ask any wooden boat owner and they will tell you about the constant maintenance.

6/18/19       #3: Wooden sink ...
MarkB Member

There is a small shop near us that has made several wood sinks and wood counter in wet locations. Im with Tom that none of my customers would maintain them but if yours would this guy uses CPES on all of it. I think he is partial to Smiths but my guess is any of them would be about the best protection you could hope for and yes, he does all the assembly with epoxy.

6/18/19       #4: Wooden sink ...
David R Sochar Member

There are several firms that make tubs and sinks everyday.
They are not likely to share their proprietary information about processes they may have spent tens of thousands of dollars developing.
Google shows two kinds of tubs - the ones with vertical slats, related to the old wooden stock tanks in every animal lot in the US, up until WW2. A Japanese soaking tub is built this way.
And some have true sculpted forms. Again, the process is not discussed.

6/21/19       #5: Wooden sink ...
the google

we've done it a couple of times. mostly for people with more money than sense, so i'm guessing these aren't used very hard. although, one was in a master bath, so more use that the others.

6/23/19       #6: Wooden sink ...
Pat Gilbert

Clever jig

https://www.facebook.com/Shapertools/videos/315038332444458/?t=23

7/3/19       #7: Wooden sink ...
David R Sochar Member

Pat - Do you like the pivot jig? That is nice compact one.
When making handrail upeasings and over easings, I have made swing jigs for the shaper or router table that will swing a piece of curved rail past the cutters to match the handrails. Usually no more than a 12" radius.
In fact, one project I have not yet set up is using a power feeder support - column, cross piece and fittings - to make short radius pieces. I would have to make - or have made - an aluminum base for the router that would attach quickly and securely to the feeder, at either the back end, or the business end once the feeder motor was removed.

I think it could be huge, with a market developing for longer horizontal tubes.

7/3/19       #8: Wooden sink ...
Pat Gilbert

That's brilliant Dave, it's the very type of thing I like about woodworking. It sure as hell is not building boxes.

8/4/19       #9: Wooden sink ...
Rufus Cooke  Member

Website: shorelineparametrics.com

Hi Guys,
I recently about spent about a year and a half working with this custom furniture maker which also produces a made-to-order line of teak sinks and baths. I was extremely skeptical about their durability, but the shop's teak bathroom sink was 5 years old when I left and it was still looking nearly new. These things are much more complex than they look - foam cores with sawn veneers, lots of engineering time to seal around the drains and overflow. They have a natural finish that resembles teak oil, but it is incredibly impervious.
I have to say that Bill Garvey is really quite an amazing man to execute this so well.
Cheers.


View higher quality, full size image (1576 X 1824)

https://williamgarvey.co.uk/baths-basins-and-showers/

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)