Woodworking Business

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Laser cutter


Iím considering adding a laser engraver/cutter to my shop as I approach my later years as a means of generating some less strenuous work. Do any of you folks have one? Whatís a good brand? Any ideas for profitable products?

8/20/18       #2: Laser cutter ...
rich c.

I had a Universal Laser System 25E years ago. It was strictly for engraving. Only machine I've ever owned that didn't pay for itself. It's an old boat anchor now, they no longer support that vintage machine. The possibility for profit is even worse today than when I started. Hobby guys can pick up a Chinese laser unit on Amazon for less than $500 and start making craft items. The next guy in a garage can get a $3500 Chinese laser and be in business with an 80 watt machine. It's also a wide open market on the internet for big engraving houses with 50 lasers all going at once. The customer merely sends a file and a thousand pieces show up at their door. You certainly don't want to start with the general public with ones and twos. You should see the look on a persons face when you tell them it's $35 for the setup, and $50/hr with a 1 hour minimum to make a useable file from their blurry artwork. Or the look you get when they want a Harley Davidson logo on 6 sets of Chinese made trivets for a wedding in 2 days and you say no. Commercial work is about the only way to make some money. By the way, they provide horrible art work too. A graphic design background will help.

8/21/18       #3: Laser cutter ...
MarkB Member

Im in a bit of agreement with Rich in that there are so many out there with cheap lasers and working on the side. The same is becoming true for CNC work.

That said, you know your market and what your client base would be. If you have good commercial contacts that your dealing with now you may be able to feel them out for the potential future work.

No idea what your target market would be but there are several good laser specific forums around that would likely give you a lot of good information.

8/23/18       #4: Laser cutter ...
Bryan "doc" Henderson  Member

Hey Kip. Yes we are all getting older. I have a job that pays the bills so I do not use my equipment as a business. We bought the Epilog Helix laser at about Christmas time. I am a hobbyist so the cost was a consideration, but not as a business plan, or bank loan. The laser has been a lot of fun, and support has been good with the dealer out of KC. My Daughter is a sophomore in college studying animation. With her background, we may start an internet business if animation studios don't start popping up in Ks. lol. I have made over 1,000 coasters, many wedding gifts, and "leaving work" plaques. Some growlers and bottles. Have done some leather bags and a parade flag carrier for our scout troop. Custom coasters sell for 20 bucks for 4 online. If you put a beer or sports team, you may have copyright issues. I have a Timberking 2000 mill, so I cut maple and ERC into 3.5 inch beams and turn 90 degrees, and cut 5/16th inch strips. These dry quick and then can cut into squares to put photos on for coasters. I got a hospital blanket warmer and can spray spar poly on and put in warmer and re-coat in 30 minutes. For plaques, I cut smaller walnut logs 5/16th inch and leave them live edge.
Have made some much appreciated military gifts. I don't charge per-say but people that ask me to do things can make a donation to my poly fund. The trick would be to find a niche that you have good sources of materials for so you can get off and running. I may upload photos later. The laser was expensive and was told upfront that the resale price plummets. Laser will need recharged at 5 years used or not at 500 dollars. The company is in Denver Co. Dealers all around and ours was happy to drive 3 hours to do an in home demo. My wife loved it, and with the poss need down the road for a company for my Daughter, we bought it. Tons of video online. We are in a town of 40k, and only a few lasers in our area. Epilog can prob. tell you of others in your area. You could start off slow, and gradually transition if it takes off. I am swamped with just word of mouth.

8/23/18       #5: Laser cutter ...
rich c.

Bryan "doc" Henderson has quickly proven my point. A hobbyist in a garage is your competition.
I bet you won't have to recharge it in 5 years unless you really turn it up for cutting all the time. They don't like running at 100%. American brands last longer. I guarantee it will be more than $500. Even the aftermarket laser services like Evergreen laser charges around $750 right now. An Epilog recharge is around $1250 through their dealers. Over $2,000 for a new tube. Chinese lasers may not even last 1 year if you run at high wattage all the time for cutting, but the replacement is cheap if the glass tube makes it through shipping from China.

8/24/18       #6: Laser cutter ...
Bryan "doc" Henderson  Member

here are some pics.

View higher quality, full size image (1200 X 1600)

View higher quality, full size image (1536 X 2048)

View higher quality, full size image (2048 X 1536)

8/24/18       #7: Laser cutter ...
Bryan "doc" Henderson  Member

a few more

View higher quality, full size image (1536 X 2048)

View higher quality, full size image (1200 X 1600)

View higher quality, full size image (1536 X 2048)

8/24/18       #8: Laser cutter ...
Bryan "doc" Henderson  Member

The bottle is the Jayhawk Doc, University of Kansas School of Medicine. My buddy moven on to new job, the back is signed by 50 co-workers

View higher quality, full size image (1536 X 2048)

View higher quality, full size image (2048 X 1536)

  • Post a Response to this thread
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)