Here is a pic of a used bander we just received this past week to replace our faithful Cehisa EP-9. It has served us well for 13 years and has already been picked up to go to a new home on west coast of Florida. The Brandt has premill and end rounding and will give us a closer to glueless edge for the modern work we have been doing. Besides the high cost of Stiles parts, any tips from Brandt users you can offer? It should be set up and tuned by end of day Monday and my 4 guys and myself will be trained on using it before we hit the start button. Are replacement cutters or blades available generic for this baby? All advise welcome. Harold.
I bought a new Brand in 2001 and added a used one in 09 the original one has been rebuilt and the 09 relegated to parts at this point we have another larger bander now as i never felt comfortable with out two.. When techs come learn from them, Keep the machines cleaned and maintained. keep air strong and clean we dedicated a compressor so no air drops in heavy use. I have two guys after all these years who can literally do all the machine needs w/o calling techs first. yes blades are readily available and we keep extras...
Had a 97 KD56SB. My machine tech said to to be sure to get the buffing wheels from Stiles. He said the trimmer inserts could come from anywhere. I think the trimmer inserts I got from Leuco. Somebody on the CMA forum mentioned using diamond tooling, but I hazard to guess you won't process enough material to justify the cost.
You don't say what model or year. Anyway, I bought a 2002 Brandt KD 76 in 2013 from an online auction for $12,000.
When we got it delivered and wired, we could not get it to come on. We had to schedule a tech who diagnosed the problem to be that the battery in the control panel had gone out and we needed to replace it. When it went out, the bander lost all its settings which we had to get from Stiles. I recall that they charged for this information.
Our machine and I am sure yours does as well, has a hour meter in the computer. You can tell how many hours are on the machine. Might be helpful. Our machine had about 11,000 hours on it when we got it which I thought was a lot, but the tech said that was not really a lot for that machine. I think we are somewhere around 14,000 hours now.
Since we have had this machine, we have had to replace the monitor, the computer and rebuild the glue pot, including and primarily the roller bearing that the glue roller rides on. Right now, it runs great.
I will add, my computer guy took an old monitor that we had laying around and wired it to replace the monitor that went down and he also was able to take an old computer and use it to replace the computer on the bander that went down. Stiles wanted $3,000 to replace the old technology computer. There are a lot of guys that learned to build and rebuild computers. Having one of these guys around is very helpful.
The biggest problem we have is keeping the edgetape from riding up. This varies with the type of tape. But, we put 5mm wood strips on most of our cabinetry and this machine works better than any machine we have ever had in the past.
I feel very lucky, I have a person working for me that is very computer savvy. He has saved us on the bander and our CNC.
hi everyone, after hooking up my new Bander and bringing in tech to get it up and running, here is my description of the process for those planning future used machinery purchases.
1. The machine was in Mississippi and was bought for 20k including delivery and a new glue pot, I had not seen the machine or had it checked and relied on Ferwood that machine was in operating condition .
2. This Bander came with most of the options available in its day with many advanced features compared to the base model.
3. I was prepared for future investment up to about 10k.
4. Turned out the machine had not been in use for over 1 year and after checking computer history, was not maintained well.
5. My technician came from 4 hrs north of me and travel time was included in my bill.
He had worked for Stiles and knew the machine. He discounted several hours each time and gave me a lower hourly rate as an introduction offer. 90.00/hr
6. Some parts took over 2 weeks to get and required more than 2 visits to get it operational,
7. Tech suggested some generic parts but many ha to come from Stiles.
8. Total cost for labour and parts came to 12k which included 1k for a 3phase 230volt
Surge protector for computer.
9. I am very pleased with the reconditioning and how well this machine performs.
Having the premill and corner rounding has been a big step up in our quality and speed of operation. Has taken some time for my workers to use the new technology, but it has been worth it.
Have a used machine checked out whenever possible.
Look into all auxiliary costs that are attached to a new machine, like rigging and placing in shop, electrical preparation, extra dust collection needed, and down time.
If you have a machine that is being replaced that works;?dont sell it before the new one is up and running. My Cehisa was picked up before the new one was installed, but I had to wait 3 weeks to get all parts . Cost me another 500.00 in banding services plus much more to deliver the parts and return to shop.
Attached is a pic of my new, reconditioned Bander. Hope I made the right decision and that my journey can be helpful 😅
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.