You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

new tools for my shop have 1200 ft now moveing too 8000 spot



I want too up grade too better tools I have all grizzly now and now im going too up grade on 5 tools around 40,000 and I have my hart set on oliver tools how are they please help

10/10/15       #2: new tools for my shop have 1200 ft ...
james mcgrew Member

Buy a cnc work with what you have and you will grow

10/10/15       #3: new tools for my shop have 1200 ft ...
Mark B Member

For someone without a CNC I would have to agree with James. If I had 40K to invest, and a bunch of decent/mediocre tools, and had been running a shop, Id be investing in a CNC.

The last thing I would be doing is upgrading anything other than the most essential tools I had at the moment that suck, or tools that compliment the CNC.

10/11/15       #4: new tools for my shop have 1200 ft ...

If I didn't have all these tools and had it to do over I'd buy a CNC, edgbander and a hinge machine. Outsource doors and forget the rest. The most amount of money made is, not, being a full service shop.

10/12/15       #5: new tools for my shop have 1200 ft ...
Hen Bob Member

Pete pretty much nailed it. Get a used CNC, edgebander, hinge press, Sliding table saw etc.. Outsource everything you can, Doors/drawers etc.. I was in your shoes 4 years ago with almost no money to invest. Now were doing 40 some kitchens a year out of a 5000sq ft room with 3 guys...

The old iron woodworking stuff is great, but if your trying to make a living and not a hobby you need to automate as much as possible. Don't get me wrong, the Oliver stuff is really nice, I have a bunch of MOAK equipment that is terrific as well. But that stuff rarely gets turned on by comparison to the cnc equipment.

MY 2cents

10/14/15       #6: new tools for my shop have 1200 ft ...
Mike Fuson

I don't have a cnc router but my buddy's shop does and I let him do certain things for me on it. I've watched it operate several times and here is my question that might help Frank with his question.
I've watched my buddy cut cabinet parts on his and as far as speed goes isn't a table saw faster? Granted the cnc takes all the work out of it but while I've watched seems like I could have had the parts cut and stacked by the time the router got done cutting. Nothing is as accurate as a cnc, and I have him make parts that have something fancy or a certain feature that would be hard to do on my tools but as far as cabinet parts? Keep in mind that I'm speaking from my lack of knowledge and asking a question not making a declaration.

10/14/15       #7: new tools for my shop have 1200 ft ...
Bruce H

Mike, in a nutshell, no. The cnc continues to operate while you are doing something else. I can run my cnc and the saw at the same time. (depends on the parts) I can make a bathroom run, talk on the phone or answer a few questions while the machine is continuing to make product. Same is true for my saw. While it is running I can collect scrap and dispose of it, or stack parts, or other little things that need doing, all the while the machine continues to cut. You'd wear yourself out trying to keep up with a machine every day. It's kind of like before you got a fork lift and then after. A few sheets don't all that much time but...

10/14/15       #8: new tools for my shop have 1200 ft ...
Mike Fuson

Makes perfect sense Bruce, hadn't thought about it like that. I guess it's like having an employee with my exact knowledge with a much steadier hand and better work ethic😂

10/14/15       #9: new tools for my shop have 1200 ft ...
Mike Fuson

Those ridiculous numbers at the end of my post was supposed to be a smiley face...

10/15/15       #10: new tools for my shop have 1200 ft ...
james mcgrew Member

REAL BIG addition to the time and labor save of a CNC is the custom parts, radius, forms, handicap legs and a host of Money makers the thing produces, Steve Spurrier Resigned as Head Ball Coach At USC this week later this AM I will show you how fast you can turn that into a Buck when requested.

10/15/15       #11: new tools for my shop have 1200 ft ...

If you have good software you save time on design and limit mistakes. Our CNC machine paid for itself within a year. It also made our "sawing operation" less complex. It takes very little training to run a CNC. If our main operator is out we can still run at full capacity.

10/24/15       #12: new tools for my shop have 1200 ft ...
Pat J Member


I'll agree with the posters above. We bought a used CNC in April, followed closely by a high end miter box and Tiger Stop. The learning curve on the CNC was steep (and the software expensive) but it has unquestionably revolutionized my business. We have always outsourced doors and dovetail boxes and now we have the boxes done so fast we are waiting for the doors to arrive to complete!

The one thing I can't emphasize enough is the "cost" of learning to use the machine to it's full potential and efficiency- that can't be underestimated but it is MORE than worth it in the end.

10/25/15       #13: new tools for my shop have 1200 ft ...
Bob B


Why get a used CNC as has been suggested? I import CNC machines from China and upgrade the electronics. I am able to offer new CNC machines at used prices. For less than the cost of a used pickup truck you can have a precise CNC machine to complement any small shop.

CNC for the small shop

11/28/15       #14: new tools for my shop have 1200 ft ...
Jesse James

Use that money for a down payment on a rental. I don't know any wealthy woodworkers, know lots of wealthy landlords!

12/2/15       #15: new tools for my shop have 1200 ft ...


We have all forgotten to ask what kind of work he does?

But that being said, it makes the point that there are few to no reasons not to purchase a CNC whether its being used for kitchens , passage doors or furniture . It is like adding an employee, buy a solid machine that you can rely on. Like the employee, you will get what you pay for. I love my biesse and the support provided. But not sure you'll find one for 40k. We fill empty machine time by running parts for other shops in our area and have started making wooden components for other people as well. Most recently guitar work has been added on and is been alot of fun!

  • Post a Response to this thread
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello