You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Euro hinges in clear glass cabinet



Hi all, so we just finished a kitchen install.
Customer is very happy but she noted her attention goes to the gray blum hinges in the glass cabinet, which are sprayed white on the inside. She is wondering if there's anything we can do about it, I had the thought of spraying the hinges white, but never seen them sprayed before.

She is not asking for it to be fixed, but this has never come up before with any other client, and we've done plenty of glass doors, so I'm just wondering if anyone has had a similar experience.

I attached a picture that kind of shows the hinges

View higher quality, full size image (3264 X 2448)

3/29/17       #2: Euro hinges in clear glass cabinet ...
Mike Fuson

I've never had anyone to complain about it either but it does aggravate me. Salice is what I use and the base plate is smaller than the Blum so it's not as obvious. Salice also makes a black or ORB finish hinge that looks better in stained cabinets. As far as painting the hinges, I've never heard of that but I think if I tried it I'd use rattle can spray paint. Several real light coats maybe.

3/30/17       #3: Euro hinges in clear glass cabinet ...

Salice has their Lapis hinge which has a cover plate in multiple finishes including white. Salice also offers the Salice Air hinge which works on frameless cabinets. Salice Air mortises into the front endge of frameless box and is not visible inside the cabinet. We use Hafele for these hinges.

3/30/17       #4: Euro hinges in clear glass cabinet ...
Dennis Bean  Member


Hello Alessio,

Painting European hinges is possible but not highly recommended. First, it would be necessary to degrease the hinge to prevent the paint from pealing. Once degreased however, most manufacturers will void the warranty on the product. At Salice, we have painted hinges for customers in the past (Usually black for the office furniture industry). To keep the warranty valid, the hinge parts would be painted prior to assembly of the hinge. Once painted and assembled a very small amount of biodegradable lubricant would be applied (as always) to the hinge spring and the lifetime warranty would therefore continue to be valid.

I see by your photos that the hinges are in cabinets that probably will not be used very often by your customer. In this case, the warranty issue may not pose a problem.

Ok, now on to a better solution.

A few years ago, Salice introduced a soft close hinge designed expressly for this condition. The hinge, called Lapis, is a unique hinge system that features decorative covers of many colors including white. Not only does Lapis camouflage the unsightly nickel hinge but also adds a decorators touch with an aesthetically unique and pleasing appearance.

To substitute Lapis on this job it will be necessary to take the doors back to the shop, plug and re-paint the current hinge (8mm) dowel holes then insert the Lapis hinge in the existing 35mm cup hole. Also, check the depth of the 35mm hole. Lapis requires a 13.5mm cup depth to insure the soft close feature works correctly. The Lapis hinge requires an inline mounting plate so you will also need to also fill and paint the current mounting plate screw holes on the cabinet side.

The result will be an engineered product that your customer will appreciate.

Here is a product bulletin for lapis and a video showing the installation.

Best of luck,


View higher quality, full size image (1240 X 1656)

Salice Lapis Installation Video

3/30/17       #5: Euro hinges in clear glass cabinet ...
Dennis Bean  Member


Hi Mike Fuson,

Glad to hear you are on board with our Titanium plated (ORB) hinges.

Have a great day,


View higher quality, full size image (1126 X 966)

3/30/17       #6: Euro hinges in clear glass cabinet ...
Dennis Bean  Member


Hi Dan,

Thanks for mentioning the new Salice Air hinge. This is indeed the next evolution of concealed hinges that truly makes them "concealed". By the way, the Air hinge was a Challenger's Award winner for innovative new products at the IWF show in 2016.

Have a great day,


View higher quality, full size image (960 X 802)

Salice Air Hinge Video

3/30/17       #7: Euro hinges in clear glass cabinet ...

Thank you Dennis, yes I have heard of the lapis hinge, but was never able to get a price on it because I'm not sure anyone in our city carries it (Ottawa, Canada)

3/30/17       #8: Euro hinges in clear glass cabinet ...
Kip Stevens

Salice also makes a "curio" style hinge called "exentra" which is very small. I have used this in the past for a very, shall we say, "discriminating" customer. They virtually disappear.

3/30/17       #9: Euro hinges in clear glass cabinet ...
Mike Fuson

Hello back to you Dennis.
There are no other hinges than Salice.

3/31/17       #10: Euro hinges in clear glass cabinet ...

It is a standard for us to use the blum compact hinges in all of our glass cabinets, especially with clear glass.
It is a slight pain since the mounting hole is different on the FF side, but the standard hinge can be an eye sore.

4/7/17       #11: Euro hinges in clear glass cabinet ...
Bruce H

Unless the cabinets will forever remain empty I doubt once in use the hinges will be noticed.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Today's Sponsors
    • Shop Gear Inc.
      Distributor of Co-matic Power Feeders, Le-matic Portable Edgebanders, and Supplier of Woodworking Machinery, Tooling and Accessories in North America
    • Better Vacuum Cups, Inc.
      Vacuum Cups for All CNC Routers As Well As Many After Market Parts for Your CNC
    • Impact Search and Placement
      Professional Employment Recruiting Specialists
      The Ultimate Spoilboard - ULTI-BOARD - Specifically Engineered and Formulated for the Ultimate in Spoilboard Performance - Not Your Ordinary Sheet of MDF.
    • Steve H. Wall Lumber Co.
      Quality Hardwoods and Softwoods, Exotic Wood, Furniture Quality Plywood, and Hardwood Flooring
    • Thorvie International
      A Leading Manufacturer of Saw and Tool Sharpening Equipment
    • Seymour & Associates Inc.
      Talent Recruitment for Custom Wood Store Fixtures, Architectural Millwork, and Cabinetry Professionals
    • Simantech
      New & Used Machinery, Supplies, Tooling, Parts, and Abrasive Products
    • Byrd Tool
      Quality Tooling for the Woodworking Industry
    • CP Adhesives
      Supplying Quality Adhesives to the Woodworking Industry
    • Rose Machinery
      Horizontal Band Re-rips, Standard & Custom Designed Machinery
    • 2020 Manufacturing Solutions
      Manufacturing Software Solutions Including an Offering Designed For Cabinetmakers, In Addition to Furniture, Architectural Millwork and Other Wood Product Manufacturers We Support
    • Vexor Custom Woodworking Tools, Inc.
      Custom and Standard Router Bits, Shaper Cutters, Profile Knives, Multi Profile Insert Tooling and More

    Become a Sponsor today!