Cabinetmaking Forum

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Outsource plywood processing

5/9/18       
MICHAEL SANDERS Member

Website: http://www.sanderswoodworks.com

I have a small cabinet shop in Beaufort, SC. I typically process my plywood with panel saw, tablesaw, etc, but I have a back log of work and need to get ahead. I am looking for a shop than can cut my parts with a CNC router. Anyone have any suggestions? Am I asking in the right forum?
Thanks in advance!

5/9/18       #2: Outsource plywood processing ...
Robb Parker  Member

Website: http://www.HeritageWoodwright.com

Be glad to process through our CNC. Let me know what files you have them in. Located in Denver, NC.

5/10/18       #3: Outsource plywood processing ...
james e mcgrew Member

Website: mcgrewwoodwork.com

Might be a good time to Begin to look to a CNC, call Hostetler in Chas, Goof friend of mine, he may not do this but will know who will.

On another note, when you are ready come on up to Columbia and let me show you haw a CNC will make a Small shops life far more comfortable.

PS Hope to Moor My boat in Beaufort !

5/10/18       #4: Outsource plywood processing ...
rich c.

I'd suggest Cabinotch. Prefinished and all joinery done. A very good way to catch up! Only takes a day to assemble all the boxes for an entire kitchen. Then you can look at future manufacturing changes if you want to.

https://www.cabinotch.us

5/10/18       #5: Outsource plywood processing ...
Collin Parker  Member

Website: heritagewoodwright.com

I'd triple check someone like cabinotch's lead time before pulling the trigger, and that's before you even take shipping time into account. There are many many many other options on the east coast....fyi this is straight from their website "We are currently shipping orders in about 5-7 working days. You will be emailed a tracking number when your order ships."

Long story short, do your homework and go local for quicker lead times as long as quality is there.

5/10/18       #6: Outsource plywood processing ...
Tracy Yarborough  Member

Website: http://mapleriverwood.com

I second what Jim McGrew said. I am located up near Florence, SC. Would be willing to talk to you about processing your parts, but we may be too far apart.
You are more than welcome to come visit and talk "shop" about what the CNC has done for my business.

5/10/18       #7: Outsource plywood processing ...
rich c.

Collin, Have you had trouble with Cabinotch?
Pretty unusual not to have a few weeks to a month lead time after signing a contract to build a kitchen. Even if they slipped a couple of days, I can't imagine 10 days would be an issue. Most cabinet shops would request about the same time to work in another shop's job. I don't see the difference.

5/10/18       #8: Outsource plywood processing ...
Collin Parker  Member

Website: heritagewoodwright.com

We delivered (not just date of ship) last $15k commercial job in 6 days 500 miles away, including assembly. Just saying. Go cabinotch if thatís what you like...

5/10/18       #9: Outsource plywood processing ...
Collin Parker  Member

Website: heritagewoodwright.com

If youíre not running 10- day lead times on anything less than one-off, then youíre doing it wrong

5/10/18       #10: Outsource plywood processing ...
Collin Parker  Member

Website: heritagewoodwright.com

Aside from the fact that with them u support Columbia, who when tariff hit, decided to raise their price of domestic goods to match. Therefore continuing the buying of import plywood instead of promoting domestic growth. But what do I know

5/11/18       #12: Outsource plywood processing ...
Folz Cabinets

If you used KCD software you can gang cabinotch boxes together into one unit up to 4'x8'. Just design and upload

5/11/18       #13: Outsource plywood processing ...
rich c.

Collin, How does providing your shop production help the small shop that has a backlog and delivery issue? Or are you suggesting he subs his work to your shop since you have excellent turn around time.

5/11/18       #14: Outsource plywood processing ...
Collin Parker  Member

Website: heritagewoodwright.com

Rich C, that is the whole point of the thread. He is wanting to outsource box production to focus on other tasks within his shop. I confused as to how you are confused? Anyways, I'd recommend someone local with trustable lead times and quality. It is a great stepping stone to moving to cnc internally.

5/11/18       #15: Outsource plywood processing ...
rich c.

Maybe I'm confused because you have an unusual marketing plan to gain business. You caution that a national competitor may be lying about delivery times, complain about supporting corporate supplier pricing plan if you use the competitor, and then criticize any shop that isn't running 10 day lead times as doing something wrong. None of that says "please call me to work out a plan" to me.

5/15/18       #16: Outsource plywood processing ...
MICHAEL SANDERS Member

Website: http://www.sanderswoodworks.com

Thanks for all of the responses!
The product I deliver is not compatible with a system like cabinetnotch. I do highly customized kitchens and other residential work. The scale of my shop does not warrant the cost of high end design software. I design in sketchup, then run through cutlisting and optimizing software. I want someone to provide me with labeled parts, cut to size, with dados and pin holes as needed. I have three jobs that would require around 50-60 sheets of ply each. I would prefer to work with some one in my area. I would travel as far as Columbia. I am flexible. Let me know if you can work with me.
Thanks,
Michael

5/15/18       #17: Outsource plywood processing ...
Robb Parker  Member

Website: http://www.HeritageWoodwright.com

Michael, James Mcgrew is the closest I know of in Colombia. Very capable, but not sure able with his schedule.

We are just north of Charlotte in Denver, NC. We would take your sketchup and program that into Mozaik to process your panels. At this point, we could work that processing in.

5/15/18       #18: Outsource plywood processing ...
MICHAEL SANDERS Member

Website: http://www.sanderswoodworks.com

Robb,
Can you provide an average cost per sheet? Do you provide the ply? I typically use import prefinished birch from Wurth for my boxes.
-Michael

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)