DIY Homemade tool cabinet. Drawer pulls. Need help
1/13/23
Hello guys! Im making some DIY drawers for my garage simliar to pictures. Very simple flat face construction. I need help looking for budget friendly full length drawer pulls.
Similar to the drawer pulls you see on tool boxes. Where is the best place to puchase this from? My drawers are 3 feetwide so looking for long strips of it in 8 foot lengths. The precut stuff is expensive.
Thanks for your help
This place sells extruded alum. Not sure if what I need https://extrude-a-trim.com/product-category/drawer-finger-pull
View higher quality, full size image (640 X 480)
1/13/23 #2: DIY Homemade tool cabinet. Drawer p ...
Where are you located, that just looks like a piece of 1x 2 inch aluminum angle. There are lots of places that sell it in long lengths. I would check with some of the glass shops in your area, then some places that sell metal and aluminum, even places like the big box stores and princess Auto in Canada carry it, maybe somewhere like harbour freight in the US.
The glass guys would be my first stop.
1/15/23 #3: DIY Homemade tool cabinet. Drawer p ...
If you want inexpensive just cove the back of a piece of 1x for a full length finger pull and paint it silver.
1/16/23 #4: DIY Homemade tool cabinet. Drawer p ...
https://orangealuminum.com/drawer-pulls-handles/